Protein adsorption on polystyrene latex particles

Protein adsorption is the net result of various types of interaction between the different components present in the system, i.e. the sorbent surface, the protein(s), the solvent and any other solutes such as low molecular weight electrolyte. In this paper methods and techniques will be discussed to study the mechanism of protein adsorption on, in particular, colloidal particles. The discussion is based on experimental data obtained with relatively simple systems that contain one well-defined protein and well-characterized polystyrene latexes. Thus, the adsorption behavior of lysozyme and α-lactalbumin are compared, emphasizing the role of structural rearrangements in the protein molecule.     

The influence of sodium-n-alkyl sulphates on positively and negatively charged AgI systems

Summary The influence of sodium-n-alkyl sulphates with even number of C atoms (from 6 to 16) on the positively and negatively charged AgI systems was examined. The coagulation concentrations for each alkyl sulphate for positively charged AgI was determined. The critical concentrations of alkyl sulphates for a process similar to coagulation on negatively charged AgI systems were also determined. In both cases, the in statu nascendi method was employed. The coagulation concentrations and critical concentrations are in linear relationship with the number of C atoms of the sodium-n-alkyl sulphates.

---

Zusammenfassung Es wurde die Wirkung von Natrium-n-Alkylsulfaten mit 6, 8, 10, 12, 14 und 16 C-Atome in der Alkylkette auf positiv sowie negativ geladene AgJ-Systeme untersucht. Dabei wurden die Koagulationskonzentrationen der erwähnten Alkylsulfate für positiv geladene AgJ-Systeme und die kritischen Konzentrationen derselben einen der Koagulation ähnlichen Proze bei den negativ geladenen AgJ-Systemen bestimmt. In beiden Fällen wurde eine in statu nascendi Methode angewandt. Die Koagulationskonzentration sowie die kritischen Konzentrationen zeigen eine lineare Abhängigkeit von der C-Atomanzahl im betreffenden Natrium-n-Alkylsulfat.

---

---

With 3 figures and 1 table     

Adsorption of anionic surfactants on positively charged polystyrene particles II

In the case of cationic polystyrene latex, the adsorption of anionic surfactants involves a strong electrostatic interaction between both the particle and the surfactant, which may affect the conformation of the surfactant molecules adsorbed onto the latex-particle surface. The adsorption isotherms showed that adsorption takes place according to two different mechanisms. First, the initial adsorption of the anionic surfactant molecules on cationic polystyrene surface would be due to the attractive electrostatic interaction between both ionic groups, laying the alkyl-chains of surfactant molecules flat on the surface as a consequence of the hydrophobic interaction between these chains and the polystyrene particle surface, which is predominantly hydrophobic. Second, at higher surface coverage the adsorbed surfactant molecules may move into a partly vertical orientation with some head groups facing the solution. According to this second mechanism the hydrophobic interactions of hydrocarbon chains play an important role in the adsorption of surfactant molecules at high surface coverage. This would account for the very high negative mobilities obtained at surfactant concentration higher than 5×10^–7 M. Under high surface-coverage conditions, some electrophoretic mobility measurements were performed at different ionic strength. The appearance of a maximum in the mobility-ionic strength curves seems to depend upon alkyl-chain length. Also the effects of temperature and pH on mobilities of anionic surfactant-cationic latex particles have been studied. The mobility of the particles covered by alkyl-sulphonate surfactants varied with the pH in a similar manner as it does with negatively charged sulphated latex particles, which indicates that the surfactant now controls the surface charge and the hydrophobic-hydrophilic character of the surface.Dedicated to the memory of Dr. Safwan Al-Khouri IbrahimPresented at the Euchem Workshop on Adsorption of Surfactants and Macromolecules from Solution, Åbo (Turku), Finland, June 1989     

Differential thermal analysis of negatively charged polystyrene latices

To study vicinal water structure around polystyrene latex particles differential thermal analysis (DTA) has been utilized. Measurements of programmable water thermodesorption from polystyrene surfaces under dynamic and quasiisothermal conditions were made. Therefore, the adsorption potential distribution function was calculated and the hydrophobicity of polystyrene surfaces determined. DTA is presented as a useful method to study the interfacial properties of polymer colloids.     

Spectroscopic studies of nanostructures of negatively charged free base porphyrin and positively charged tin porphyrins

Spectroscopic studies were carried out on the homoaggregates of negatively charged free base meso-tetraphenylsulfonated porphyrin ([H₂TPPS₄]⁴⁻) and heteroaggregates of a mixture of protonated ([H₄TPPS₄]²⁻) and tin meso-tetra (N-methyl-4-pyridyl) porphyrin ([SnTMPyP]⁴⁺). The spectroscopic studies were done to determine the optimal conditions required for the fabrication of porphyrin nanorods by ionic self assembly of two oppositely charged porphyrins. In addition, the various spectral changes of [H₄TPPS₄]²⁻ with concurrent change in pH and concentration are also investigated. In acid media at pH <3, and at concentrations >1 × 10⁻⁵ M, [H₄TPPS₄]²⁻ molecules form J aggregates. A mixture of [H₄TPPS₄]²⁻ and [SnTMPyP]⁴⁺ forms heteroaggregates of the J type in acid media. At pH’s 2 to 3, the optimum ratio for the formation of J aggregates is 3:1 and for pH 1, the optimum ratio is 2:1. Transmission electron microscope images of the nanostructures formed show that they are of cylindrical shape.     

Interaction of dextran sulfates with positively and negatively charged silver bromide hydrosols

Summary The effects of dextran sulfates of different molecular weights and charge densities on the stability of positively and negatively charged silver bromide solsin statu nascendi have been studied by means of light scattering.The plots of scattering intensities of a positively charged sol against the concentration of the added dextran sulfates show one pronounced maximum, the position which is independent on the molecular weight of the polyelectrolyte used. The maximum shifts to lower polyion concentrations with dilution of the sol.The effect of polyanions on the stability of silver bromide sols of the same sign of charge were investigated as a function of molecular weight of the polymers, the sol concentration, the charge and the concentration of counterions, and the addition of methanol. Destabilization only occurred if sufficient amount of indifferent electrolyte was present in the system. However, the concentration of counterions necessary to produce a flocculation maximum was lower in the presence of the polyelectrolytes than in their absence. The results obtained were compared with the data on sols containing nonionic dextrans reported earlier.

---

Zusammenfassung Der Einfluß der Dextransulfate von verschiedenen Molekulargewichten und Ladungsdichten auf die Stabilität der positiv und negativ geladenen Silberbromid-Solein statu nascendi wurden durch Lichtstreuung untersucht. Wenn die Intensitäten der Lichtstreuung eines positiv geladenen Silberbromid-Sols gegen die Konzentration der zugesetzten DextranSulfate aufgetragen werden, tritt ein ausgeprägtes Maximum auf, dessen Lage von dem Molekulargewicht des angewandten Polyelektrolyten unabhängig ist. Bei Verdünnung des Sols wird das Maximum zur niedrigeren Konzentration des Polyanions verschoben.Der Einfluß der Polyanionen auf die Stabilität der Silberbromid-Sole mit gleichem Ladungsvorzeichen wurde in Abhängigkeit von dem Molekulargewicht des zugesetzten Dextransulfats, der Solkonzentration, der Ladung und Konzentration der Gegenionen und dem Zusatz von Methylalkohol untersucht. Destabilisierung wird nur in Anwesenheit einer genügenden Menge von Neutralelektrolyten in den untersuchten Systemen beobachtet. Die Konzentration der Gegenionen, die ein Flockungsmaximum verursachen, ist immer niedriger als die kritische Koagulationsmenge derselben Ionen für das gleiche Sol in Abwesenheit von Makroionen. Die Resultate wurden mit den Wechselwirkungen der Silberbromid-Sole mit nichtionogenen Dextranen verglichen, und der Mechanismus der Flockung durch Polyelektrolyte wurde diskutiert.

---

---

5 figures and 1 table

---

Supported by the NSF Grant GP 42331 X.

---

A part of the Ph.D. Thesis by David Lindsay.     

Adsorption orientations and interactions of methyl orange on negatively and positively charged colloidal silver particles

Both positively and negatively charged colloidal silver particles were prepared from chemical deoxidized methods. Then UV-visible absorption, fluorescence, and surface-enhanced Raman scattering of methyl orange adsorbed onto surfaces of these two kinds of particles were observed and compared with each other. The results indicate that dye molecules may adsorb onto these two kinds of silver surface in differing adsorption orientations with different interactions, which caused the different phenomena.     

Charging and aggregation of positively charged latex particles in the presence of anionic polyelectrolytes

Charging behavior and colloidal stability of amidine latex particles are studied in the presence of poly(sodium styrene sulfonate) (PSS) and KCl. Detailed measurements of electrophoretic mobility, adsorbed layer thickness, and aggregation (or coagulation) rate constant on varying the polymer dose, molecular mass of the polymer, and ionic strength are reported. Polyelectrolyte adsorption leads to the characteristic charge reversal (or overcharging) of the colloidal particles at the isoelectric point (IEP). In accordance with classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, uncharged particles tend to aggregate because of van der Waals attraction, whereas charged particles are stabilized by electrical double layer repulsion. Attractive patch-charge interactions originating from the laterally inhomogeneous structure of the adsorbed polymer substantially decrease the suspension stability or even accelerate the aggregation rate beyond diffusion control. These electrostatic non-DLVO forces become progressively important with increasing molecular mass of the polymer and the ionic strength of the solution. At higher polymer dose of typically 10 times the IEP, one observes the formation of a saturated layer of the adsorbed polymer with a thickness of several nanometers. Its thickness increases with increasing molecular mass, whereby the layer becomes increasingly porous. This layer does not seem to be involved in the suspension stabilization, since at such high polymer doses the double layer repulsion has attained sufficient strength to stabilize the suspension.     

Theoretical insights on O2 and CO adsorption on neutral and positively charged gold clusters

With the aim of understanding the elementary steps governing the oxidation of CO catalyzed by dispersed or supported gold nanoclusters, the adsorption of molecular species, such as O2 and CO, on model neutral and positively charged clusters (Au(n)(m+) n = 1, 9, and 13; m = 0, 1, and 3) has been studied using an ab initio approach. The computed structural and thermodynamic data related to the binding process show that molecular oxygen interacts better with neutral clusters, acting as an electron acceptor, while CO more strongly binds to positively charged species, thus acting as an electron donor.     

表面活性剂在低能固体表面上的吸附 Ⅲ: 聚苯乙烯胶乳粒子对阴离子表面活性剂的吸附

在无乳化剂的条件下合成了粒径均匀的聚苯乙烯胶乳, 发展了应用表面张力计测定吸附等温线的连续平衡法, 得到不同盐浓度下聚苯乙烯胶乳对十二烷基硫酸钠和十二烷基苯磺酸钠的吸附等温线, 它们属于Giles分类的L2 型或L1 型, 采有两阶段吸附模式讨论了吸附机理, 吸附层结构及等温线类型变化的规律。     

The action of indomethacin on neutral and positively charged monolayers

The penetration ability of indomethacin in neutral and positively charged monolayers has been studied. Neutral monolayers of cholesterol and dipalmitoyl phosphatidyl choline present a slight but significant increase of surface pressure. The presence of stearylamine in the films results in an increase of surface pressure due to an electrostatic effect between the carboxylic anion of indomethacin and the polar head group of the stearylamine. These values can afford a reference point to choose the best lipid composition of liposomes encapsulating indomethacin to avoid the drug causing leakage of liposomes.     

Protein PEGylation attenuates adsorption and aggregation on a negatively charged and moderately hydrophobic polymer surface

Covalent grafting of poly(ethylene glycol) chains to proteins ("PEGylation") is emerging as an effective technique to increase the in vivo circulation time and efficacy of protein drugs. PEGylated protein adsorption at a variety of solid/aqueous interfaces is a critical aspect of their manufacture, storage, and delivery. A special category of block copolymer, PEGylated proteins have one or more water-soluble linear polymer (PEG) blocks and a single globular protein block that each exert distinct intermolecular and surface interaction forces. We report the impact of PEGylation on protein adsorption at the interface between aqueous solutions and solid films of poly(lactide-co-glycolide) (PLG), a moderately hydrophobic and negatively charged polymer. Using the model protein lysozyme with controlled degrees of PEGylation, we employ total internal reflection fluorescence techniques to measure adsorption isotherms, adsorption reversibility, and the extent of surface-induced aggregation. Lysozyme PEGylation reduces the extent of protein adsorption and surface-induced aggregation and increases the reversibility of adsorption compared to the unconjugated protein. Results are interpreted in terms of steric forces among grafted PEG chains and their effects on protein-protein interactions and protein orientation on the surface.     

Participation of electrolyte cations in albumin adsorption onto negatively charged polymer latices

The participation of electrolyte cations in the adsorption of bovine serum albumin (BSA) onto polymer latices was investigated. The latices used were hydrophobic polystyrene (PS), and hydrophilic copolymers, i.e., styrene (St)/2-hydroxyethyl methacrylate(HEMA) copolymer [P(St/HEMA)] and styrene/acrylamide (AAm) copolymer [P(St/AAm)]. Three kinds of electrolyte cations (Na⁺, Ca²⁺, Mg²⁺) were used as the chloride. The amount of BSA adsorbed in every cation medium showed a maximum near the isoelectric point (iep, pH about 5) of the protein. The amounts of BSA adsorbed onto copolymer latices (except in the acidic pH region lower than the iep) were considerably smaller than that onto PS latex because of the steric repulsion and the decrease in the hydrophobic interaction between BSA and copolymer latices. In the acidic pH region, there was little difference in the amount of BSA adsorbed in every cation medium. However, in the pH region higher than the iep, the amounts of BSA adsorbed (particularly onto PS latex) in divalent cations (Ca²⁺ and Mg²⁺) media were relatively greater compared with that in a monovalent (Na⁺) one. This result was interpreted on the basis of the differences in such effects of electrolyte cations as dehydration power, suppression of the electrostatic repulsion, and binding affinity to BSA molecule. Ion Chromatographic estimation of the amounts of electrolyte cations captured upon BSA adsorption (in pH > 5) revealed that divalent cations were incorporated into the contact interface between the latex and BSA molecule so as to prevent the accumulation of anion charge and facilitate the protein adsorption.     

一种可控离子比例的两性亲水色谱固定相的制备及性能研究

将不同比例的氨基和巯基的硅烷偶联剂键合到硅胶表面，再利用巯基与乙烯基膦酸之间的点击化学反应将膦酸基团引入到硅胶表面，制备了一种可调节正负离子比例的两性亲水色谱固定相。通过测定固定相中C、H、N、P元素的含量，证明了氨基与膦酸基团已成功键合到固定相的表面，同时通过N元素与P元素的质量分数确定固定相表面氨基与膦酸基团的比例。制备了3种不同电荷比例的氨基膦酸固定相，将其作为亲水模式下的固定相填料填装在150 mm×4.6 mm不锈钢色谱柱中。以一系列经典的极性小分子作为探针，研究了流动相中乙腈含量、缓冲盐pH值及缓冲盐浓度等因素对探针分子在3种色谱柱上的保留的影响，结果表明，分析物在固定相上是多重保留机理。最后通过比较核苷、水溶性维生素、碱性化合物、苯甲酸这几类标准物质在3种色谱柱上的保留行为来对比3种不同电荷比例的固定相的分离选择性与色谱性能。结果表明，对于不同的分析物，3种固定相表现出完全不同的分离选择性和色谱行为。可以根据分析物的特征选取不同电荷比例的固定相，表明此种固定相在极性化合物的分离上具有良好的应用前景。     

Charge regulation enables anionic hydroxypropyl guar-borate adsorption onto anionic and cationic polystyrene latex

Reported are adsorption isotherms for guar and hydroxypropyl guar (HPG), with and without the presence of borate ions, onto surfactant free anionic polystyrene latex. Guar and HPG formed adsorbed monolayers on the hydrophobic latex. The presence of borate ions converted the nonionic guar and HPG into an anionic polyelectrolyte. However, there was no measurable influence of bound borate ions on the adsorption of guar or HPG onto anionic, hydrophobic latex. To underscore the unusual behavior of HPG-borate, a sample of HPG was oxidized to introduce carboxyl groups, and the adsorption of the carboxylated HPG onto anionic polystyrene was measured. Unlike HPG-borate, oxidized HPG did not adsorb onto negative polystyrene latex at neutral pH because of electrostatic repulsion. To explain the adsorption of negative HPG-borate onto negative latex, we proposed that as HPG-borate segments approach the latex surface, the negative electrostatic potential near the latex surface induces the detachment of the labile borate groups from HPG.     

Phase behavior of polyampholytes from charged hard-sphere chain model

A molecular thermodynamic theory is developed for polyampholytes from the coarse-grained charged hard-sphere chain model. The phase behavior of polyampholytes with variations in sequence and chain length is satisfactorily predicted by the theory, consistent with simulation results and experimental observations. At a fixed chain length, the phase envelope expands as the sequence of charge distribution becomes less random. With increasing chain length, the phase envelope expands for diblock and random polyampholytes, but shrinks for zwitterionic polyampholytes. The predicted critical temperature, density, and pressure exhibit scaling relations with chain length for all the three (diblock, random, and zwitterionic) polyampholytes.     

BSA adsorption on differently charged polystyrene nanoparticles using isothermal titration calorimetry and the influence on cellular uptake

BSA adsorption onto negatively and positively charged polystyrene nanoparticles was investigated. The nanoparticles were characterized in terms of particle size, zeta potential, surface group density, and morphology. The adsorption behavior of BSA on the particle surface, as a function of pH and overall charge of the particle, was studied using ITC. Different thermodynamic data such as enthalpy changes upon binding and stoichiometry of the systems were determined and discussed. The degree of surface coverage with BSA was calculated using the thermodynamic data. The cellular uptake of particles before and after BSA adsorption was studied using HeLa cells in the presence and absence of supplemented FCS in the cell culture medium.     

Interaction of positively and negatively charged aromatic hydrocarbons with benzene and triphenylene: Towards a model of pure organic insulators

A theoretical study of the complexes formed by two aromatic charged hydrocarbons, cyclopropenyl cation and phenalenyl anion, with benzene and triphenylene has been carried out. The binary complexes between the charged molecules and the neutral ones have been characterized as well as the ternary systems with the neutral systems acting as insulators of the charged ones. In the ternary complex a cooperative effect is observed both in the energy and in the geometry. In general, the interaction with ions reduces the aromaticity of the insulators.     

Preparation and characterization of positively charged ruthenium nanoparticles

Positively charged ruthenium nanoparticles were prepared by NaBH(4) reduction at room temperature and at pH values lower than 4.9. The ruthenium nanoparticles were characterized by zeta potential measurement, TEM, XPS, and XRD. Particles with a mean diameter of 1.8 nm and a standard deviation of 0.40 nm could be obtained under the experimental conditions. The surface charge on the particles is believed to originate from hydrated proton adsorption. The positively charged ruthenium nanoparticles could be used as the starting material for further functionalization by PVP, ethylenediamine, and dodecylamine.