Diagram of State of Stiff Amphiphilic Macromolecules

Summary: We studied coil-globule transitions in stiff-chain amphiphilic macromolecules via computer modeling and constructed phase diagrams for such molecules in terms of solvent quality and persistence length. We showed that the shape of the phase diagram essentially depends on the macromolecule degree of polymerization. Relatively short amphiphilic molecules always form a spherical globule in a poor solvent, and the coil-globule transition includes one or two intermediate conformations, depending on the chain's stiffness. These are a disk-like globule in case of high enough Kuhn segment length, and a pearl necklace-like structure of spherical micelles and a disk-like globule in case of relatively flexible chains. The phase diagram of a long stiff amphiphilic chain was found to be more complex still. Thus three specific regions can be distinguished in the poor solvent region, depending on the chain stiffness. These correspond to a cylindrical globule without any specific backbone ordering, a cylindrical globule containing blobs with collagen-like ordering of the chain, and co-existence of collagen-like and toroidal globules. In the intermediate transition region in this case, apart from the pearl necklace-like conformations with spherical micelles, necklace conformations can be also observed where the polymeric chain has collagen-like ordering within each bead.     

Semiflexible amphiphilic polymers: cylindrical-shaped, collagenlike, and toroidal structures

A coarse-grained model is used to study the conformational properties of semiflexible polymers with amphiphilic monomer units containing both hydrophilic and hydrophobic interaction sites. The hydrophobically driven conformational transitions are studied using molecular dynamics simulations for the chains of varying stiffness, as characterized by intrinsic Kuhn segment lengths that vary over a decade. It is shown that the energy of hydrophobic attraction required for the realization of the coil-to-globule transition increases with increasing chain stiffness. For rather stiff backbone, the coil-to-globule transition corresponds to a first order phase transition. We find that depending on the chain stiffness, a variety of thermodynamically stable anisometric chain morphologies are possible in a solvent selectively poor for hydrophobic sites of amphiphilic monomer units. For flexible chains, the amphiphilic polymer forms a cylindrical globule having blob structure with nearly spherical blobs. With increasing stiffness, the number of blobs composing the globule decreases and the shape of blobs transforms into elongated cylinder. Further increase in stiffness leads to compaction of macromolecules into a collagenlike structure when the chain folds itself several times and different strands wind round each other. In this state, the collagenlike structures coexist with toroidal globules, both conformations having approximately equal energies.     

Amphiphilic comb macromolecules with different distribution statistics of side-chain grafting sites: Mathematical modeling

The influence of the distribution statistics of side-chain grafting sites on the conformational properties of amphiphilic comblike macromolecules immersed in a solvent that is poor for the main chain and good for the side chains was studied. It was shown that the coil-globule transition for macromolecules with the protein-like distribution of side-chain grafting sites occurs at higher temperatures, wherein the size of the proteinlike macromolecules is generally smaller than that of the corresponding regular macromolecules. Regardless of distribution statistics of side-chain grafting sites, the coil-globule transition of comb macromolecules passes through the step of the formation of the beads-on-a-string conformation composed of micelle-like beads. The temperature dependence curves of the heat capacity exhibit at least two maximums associated with the coil-globule transition per se and the coalescence of the beads into a single globule. The coil-globule transition temperature is slightly dependent upon the degree of polymerization of the main chain and drops with a decrease in the degree of polymerization of the side chains. It was found that comb macromolecules can form spherical, disklike, or cylindrical globules, depending on the structural parameters.     

Microstructuring of a polymer globule in solution in the presence of an amphiphilic substance

Microstructuring in the bulk of a polymer globule in a solution that contains dimeric amphiphilic molecules, in particular, surfactants, is studied in terms of the weak-segregation theory. An inhomogeneous structure can result from a decrease in free energy with the orientation of amphiphilic molecules in the region of inhomogeneity owing to the interaction of hydrophobic and polar parts of the molecules with the solvent. For the sake of simplicity, we discuss the case of identical second virial coefficients of the interaction of monomer units and amphiphilic molecules with different energies of interaction of the hydrophobic and polar parts of the molecule with the solvent. By comparing the free energy for different types of microstructures, we predict that, with deterioration in the quality of the solvent, there is an initial formation of a homogeneous globule followed by formation of a body-centered cubic structure; a hexagonal cylindrical structure; and, finally, a lamellar structure. For a low degree of amphiphilicity, the transition from a homogeneous globule to only a lamellar structure occurs. An increase in the concentration of the amphiphilic substance in the surrounding solution hinders the formation of a globule but facilitates its microstructuring, which is also promoted by an increase in the volume of the amphiphilic molecule and the difference in the interaction energies of its hydrophobic and polar parts with the solvent. Phase diagrams of a globule??s state at different values of model parameters are plotted.     

Kinetics of the shear-induced isotropic-to-lamellar transition of an amphiphilic model system: a nonequilibrium molecular dynamics simulation study

The shear-induced isotropic-to-lamellar phase transition in the amphiphilic systems in the vicinity of the quiescent order-to-disorder transition point is investigated by the large-scale parallel nonequilibrium molecular dynamics simulations of simple amphiphilic model systems. There is a shear-induced upward shift of the ordering temperature. The initial isotropic phase orders into a lamellar phase perpendicular to the shear vorticity. The phase diagram as a function of temperature and shear rate is established. The dependency of the ordering transition on interaction strength and shear rate is rationalized by the competition between shear rate and chain relaxation. The time evolution of morphology reveals that the shear-induced ordering proceeds via nucleation and growth, a signature of a first-order phase transition. At low shear rate, a single ordered domain grows after an incubation period. With increasing shear rate ordering speeds up, but eventually develops in a lamellar system with disordered shear bands. The time dependence of the order parameter follows that of the mean-squared end-to-end distance, shear viscosity, and bulk pressure, and follows an Avrami scheme with an Avrami exponent between 2 and 4.     

Semiflexible polymers confined in soft tubes

We discuss various conformations for a polymer (of persistent length l(p)) confined into a deformable tube (the wall being a lipid bilayer with a certain surface tension sigma and curvature energy K). Our study assumes that there is no adsorption of the chain on the wall. Three states are compared: (a) an unperturbed tube, plus a confined chain, (b) a tube swollen in all the region surrounding the chain (similar to a snake eating a sausage), (c) a globule, a roughly spherical coil surrounded by a strongly deformed tube. We construct a (qualitative) phase diagram for these systems with two variables: the surface tension sigma and the degree of polymerization N. Our main conclusion is that "globules" usually win over "snakes".     

The phase diagram of a single polymer chain: New insights from a new simulation method

We present simulation results for the phase behavior of a single chain for a flexible lattice polymer model using the Wang-Landau sampling idea. Applying this new algorithm to the problem of the homopolymer collapse allows us to investigate not only the high temperature coil–globule transition but also an ensuing crystallization at lower temperature. Performing a finite size scaling analysis on the two transitions, we show that they coincide for our model in the thermodynamic limit corresponding to a direct collapse of the random coil into the crystal without intermediate coil–globule transition. As a consequence, also the many chain phase diagram of this model can be predicted to consist only of gas and crystal phase in the limit of infinite chain length. This behavior is in agreement with findings on the phase behavior of hard-sphere systems with a relatively short-ranged attractive square well. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2542–2555, 2006     

Secondary structure of globules of copolymers consisting of amphiphilic and hydrophilic units: Effect of potential range

The relation of the coil-globule transition in macromolecules consisting of amphiphilic and hydrophilic monomer units to the radius of action of the interaction potential is investigated by the method of computer-assisted experiments. The internal structure of globules formed by such macromolecules is significantly dependent on the radius of action of the potential. In the case of the long-range potential, the globule is characterized by the blob structure, while in the case of the short-range potential, a quasi-helical structure forms. In this structure, the skeleton of a macromolecule forms a helical turn, and the direction of twisting may vary from one turn to another. The coil-globule transition in such macromolecules proceeds through formation of the necklace conformation from quasi-helical micelle beads. For sufficiently long macromolecules, the dimensions of such globules are linearly dependent on the degree of polymerization.     

Dense orientationally ordered states of a single semiflexible macromolecule: an expanded ensemble Monte Carlo simulation

Using a coarse-grained model we perform a Monte Carlo simulation of the state behavior of an individual semiflexible macromolecule. Chains consisting of N = 256 and 512 monomer units have been investigated. A recently proposed enhanced sampling Monte Carlo technique for the bond fluctuation model in an expanded ensemble in four-dimensional coordinate space was applied. The algorithm allows one to accelerate the sampling of statistically independent three-dimensional conformations in a dense globular state. We found that the temperature of the intraglobular liquid-solid transition decreases with increasing chain stiffness. We have investigated the possible intraglobular orientationally ordered (i.e., liquid-crystalline) structures and obtained a diagram of states for chains consisting of N = 256 monomer units. This diagram contains regions of stability of coil, two spherical globules (liquid and solid), and rod-like globule conformations. Transitions between the globular states are rounded first-order ones since the states of liquid, solid, and cylinder-like globules do have different internal symmetry.     

Macromolecules in a blend of poor and amphiphilic solvents

The globular state of the homopolymer macromolecule in a blend composed of a poor solvent and an amphiphilic solvent (substrate), whose molecules tend to be aligned with the solvent concentration gradient in the inhomogeneity region, was theoretically studied. The size of a homogeneous globule and the substrate concentration in its volume were calculated in terms of a bulk approximation. After the transition of the macromolecule from the coil to the globule state, its volume first decreases with a decrease in temperature and then begins to grow due to substrate molecules penetrating the globule. The substrate concentration in the globule insignificantly exceeds that outside the globule at identical second virial coefficients of interaction between monomer units and between substrate molecules. The expression for the free energy functional depending on the volume fractions of the components and on the orientation of substrate molecules was examined in the ground-state approximation. The orientation effect leads to narrowing of the surface layer and to a decrease in the surface tension of the homogeneous globule, thereby increasing its stability with respect to the transition to the unfolded-coil state.     

Phase and orientational ordering of low molecular weight rod molecules in a quenched liquid crystalline polymer matrix with mobile side chains

We study the phase diagram and orientational ordering of guest liquid crystalline (LC) rods immersed in a quenched host made of a liquid crystalline polymer (LCP) matrix with mobile side chains. The LCP matrix lies below the glass transition of the polymer backbone. The side chains are mobile and can align to the guest rod molecules in a plane normal to the local LCP chain contour. A field theoretic formulation for this system is proposed and the effects of the LCP matrix on LC ordering are determined numerically. We obtain simple analytical equations for the nematic/isotropic phase diagram boundaries. Our calculation show a nematic-nematic (N/N) first order transition from a guest stabilized to a guest-host stabilized region and the possibility of a reentrant transition from a guest stabilized nematic region to a host only stabilized regime separated by an isotropic phase. A detailed study of thermodynamic variables and interactions on orientational ordering and phases is carried out and the relevance of our predictions to experiments and computer simulations is presented.     

Monte Carlo Computer Simulation of a Single Semi-Flexible Macromolecule at a Plane Surface

Summary: The properties of a single semiflexible mushroom chain at a plane surface with a long-ranged attracting potential are studied by means of lattice Monte Carlo computer simulation using the bond fluctuation model, configurational bias algorithm for chain re-growing and the Wang-Landau sampling technique. We present the diagram of states in variables temperature T vs. strength of the adsorption potential, ε_w, for a quite short semiflexible chain consisting of N = 64 monomer units. The diagram of states consists of the regions of a coil, liquid globule, solid isotropic globule, adsorbed coil and cylinder-like liquid-crystalline globule. At low values of the adsorption strength ε_w the coil–globule and the subsequent liquid–solid globule transitions are observed upon decreasing temperature below the adsorption transition point. At high values of ε_w these two transitions change into a single transition from an adsorbed coil to a cylinder-like liquid-crystalline solid globule. We conclude that for a semiflexible chain the presence of a plane attracting surface favors the formation of a globule with internal liquid-crystalline ordering of bonds.     

Microphase Separation within a Comb Copolymer with Attractive Side Chains: A Computer Simulation Study

Computer simulation modelling of a flexible comb copolymer with attractive interactions between the monomer units of the side chains is performed. The conditions for the coil‐globule transition, induced by the increase of attractive interaction, ε, between side chain monomer units, are analysed for different values of the number of monomer units in the backbone, N, in the side chains, n, and between successive grafting points, m. It is shown that the coil‐globule transition of such a copolymer corresponds to a first‐order phase transition. The energy of attraction (ε) required for the realisation of the coil‐globule transition decreases with increasing n and decreasing m. The coil‐globule transition is accompanied by significant aggregation of side chain units. The resulting globule has a complex structure. In the case of a relatively short backbone (small value of N), the globule consists of a spherical core formed by side chains and an enveloping shell formed by the monomer units of the backbone. In the case of long copolymers (large value of N), the side chains form several spherical micelles while the backbone is wrapped on the surfaces of these micelles and between them.     

Structures of stiff macromolecules of finite chain length near the coil‐globule transition: A Monte Carlo simulation

Using a coarse‐grained model of a semiflexible macromolecule, the equilibrium shapes of the chain have been studied varying both the temperature and the chain stiffness. We have applied Monte Carlo techniques using the bond fluctuation model for a chain length of N = 80 effective monomers, and two different types of interactions: a potential depending on the angle between successive bonds along the chain to control the chain stiffness, and an attractive interaction between non‐bonded effective monomers to model variable solvent quality. In a diagram of states where chain stiffness and inverse temperature are used as variables, we find regions where the chain exists as coil, as spherical globule, and as toroidal globule, respectively. Some of these regions are not limited by sharply defined boundaries, but rather wide two‐state coexistence regions occur in between them, where also intermediate metastable structures (such as rods and disks) occur. Recording histograms of energy, orientational order parameters, etc., which exhibit a two‐peak structure in the two‐state coexistence regions, we perform a subensemble analysis of the individual structures corresponding to these peaks.     

Secondary globular structure of copolymers containing amphiphilic and hydrophilic units: Computer simulation analysis

The coil-globule transition in copolymers composed of amphiphilic and hydrophilic monomer units has been studied by the computer simulation technique. It has been shown that the structure of globules formed in such systems substantially depends on the rate at which the solvent quality worsens. The globule resulting from slow cooling is cylindrical, and its core contains a large amount of hydrophilic groups. The globule formed upon rapid cooling takes the helical conformation, in which all hydrophilic groups are displaced to the periphery. One helix turn of such globules contains 3–5 units. In both cases, the backbone of the polymer chain forms a typical zigzag-shaped structure with an average angle between neighboring bond vectors of about 60°. This fact implies that globules of copolymers consisting of amphiphilic and hydrophilic units comprise secondary structure components.     

Phase transitions in polymer brushes

Liquid crystalline ordering in planar polymer brushes is investigated theoretically by numerical calculations within a self-consistent field approximation. The brushes are formed by macromolecules with mesogenic groups in main chain and immersed in a solvent. Existence of a microphase segregated brush (MSB) regime with a collapsed orientationally ordered intrinsic sublayer and a swollen external sublayer is shown. At small grafting density, the transition from a conventional brush state to the microphase segregated state is a jump-wise first order phase transition for a finite chain length (N). The magnitudes of the jumps in the average characteristics of the brush tend to zero in the limit N → ∞ since this transition occurs only in a vanishingly small part (∝ N^−1/2) of the brush. High compressibility of MSB brush is demonstrated. The origin of phase transition in planar brushes is discussed.     

Stoichiometric polyelectrolyte complexes as comb copolymers

The collapse behavior of a single comblike copolymer chain has been studied by Monte Carlo simulations. It has been supposed that the solvent is good for the side chains but the solvent quality for the backbone chain changes. It has been shown that depending on the structural parameters of the comb copolymer (the lengths of the backbone and side chains, grafting density of the side chains) various thermodynamically stable morphologies of the collapsed backbone chain can be realized. In addition to ordinary spherical globule we have observed elongated structures as well as necklace-like conformations. The proposed model can be used to describe conformational behavior of stoichiometric complexes between block copolymers with a polyelectrolyte short block and oppositely charged linear homopolymers.     

Transitions of tethered polymer chains: a simulation study with the bond fluctuation lattice model

A polymer chain tethered to a surface may be compact or extended, adsorbed or desorbed, depending on interactions with the surface and the surrounding solvent. This leads to a rich phase diagram with a variety of transitions. To investigate these transitions we have performed Monte Carlo simulations of a bond fluctuation model with Wang-Landau and umbrella sampling algorithms in a two-dimensional state space. The simulations' density-of-states results have been evaluated for interaction parameters spanning the range from good- to poor-solvent conditions and from repulsive to strongly attractive surfaces. In this work, we describe the simulation method and present results for the overall phase behavior and for some of the transitions. For adsorption in good solvent, we compare with Metropolis Monte Carlo data for the same model and find good agreement between the results. For the collapse transition, which occurs when the solvent quality changes from good to poor, we consider two situations corresponding to three-dimensional (hard surface) and two-dimensional (very attractive surface) chain conformations, respectively. For the hard surface, we compare tethered chains with free chains and find very similar behavior for both types of chains. For the very attractive surface, we find the two-dimensional chain collapse to be a two-step transition with the same sequence of transitions that is observed for three-dimensional chains: a coil-globule transition that changes the overall chain size is followed by a local rearrangement of chain segments.     

Chitosan nanostructures deposited from solutions in carbonic acid on a model substrate as resolved by AFM

Chitosan macromolecules can be dissolved in water saturated with CO₂ under high pressure, i.e. in carbonic acid. This unique biocompatible solvent with acidity regulated by the variation of applied CO₂ pressure is rather promising for biomedical applications. In this work the main features of deposition of chitosan structures on the model substrate from solutions in this media were examined. After deposition on the mica surface, the obtained structures have been successfully visualised by atomic force microscopy (AFM). It has been found out that they adsorb as rather peculiar elongated objects with an average length of about 70?nm. Such conformations are believed to appear due to amphiphilic nature of chitosan semiflexible chains in agreement with recent theoretical findings. The well-defined geometry of the elongated monodispersed structures allows them to demonstrate some elements of liquid crystalline-like ordering.