Free-radical-induced oxidative and reductive degradation of sulfa drugs in water: absolute kinetics and efficiencies of hydroxyl radical and hydrated electron reactions

Absolute rate constants and degradation efficiencies for hydroxyl radical and hydrated electron reactions with four different sulfa drugs in water have been evaluated using a combination of electron pulse radiolysis/absorption spectroscopy and steady-state radiolysis/high-performance liquid chromatography measurements. For sulfamethazine, sulfamethizole, sulfamethoxazole, and sulfamerazine, absolute rate constants for hydroxyl radical oxidation were determined as (8.3 +/- 0.8) x 10(9), (7.9 +/- 0.4) x 10(9), (8.5 +/- 0.3) x 10(9), and (7.8 +/- 0.3) x 10(9) M(-1) s(-1), respectively, with corresponding degradation efficiencies of 36% +/- 6%, 46% +/- 8%, 53% +/- 8%, and 35% +/- 5%. The reduction of these four compounds by their reaction with the hydrated electron occurred with rate constants of (2.4 +/- 0.1) x 10(10), (2.0 +/- 0.1) x 10(10), (1.0 +/- 0.03) x 10(10), and (2.0 +/- 0.1) x 10(10) M(-1) s(-1), respectively, with efficiencies of 0.5% +/- 4%, 61% +/- 9%, 71% +/- 10%, and 19% +/- 5%. We propose that hydroxyl radical adds predominantly to the sulfanilic acid ring of the different sulfa drugs based on similar hydroxyl radical rate constants and transient absorption spectra. In contrast, the variation in the rate constants for hydrated electrons with the sulfa drugs suggests the reaction occurs at different reaction sites, likely the different heterocyclic rings. The results of this study provide fundamental mechanistic parameters, hydroxyl radical and hydrated electron rate constants, and degradation efficiencies that are critical for the evaluation and implementation of advanced oxidation processes (AOPs).     

Kinetics and mechanism of large rate enhancement in the alkaline hydrolysis of N'-morpholino-N-(2'-methoxyphenyl)phthalamide

The apparent second-order rate constant (k OH) for hydroxide-ion-catalyzed conversion of 1 to N-(2'-methoxyphenyl)phthalamate (4) is approximately 10(3)-fold larger than k OH for alkaline hydrolysis of N-morpholinobenzamide (2). These results are explained in terms of the reaction scheme 1 --> k(1obs) 3 --> k(2obs) 4 where 3 represents N-(2'-methoxyphenyl)phthalimide and the values of k(2obs)/k(1obs) vary from 6.0 x 10(2) to 17 x 10(2) within [NaOH] range of 5.0 x 10(-3) to 2.0 M. Pseudo-first-order rate constants (k(obs)) for alkaline hydrolysis of 1 decrease from 21.7 x 10(-3) to 15.6 x 10(-3) s(-1) with an increase in ionic strength (by NaCl) from 0.5 to 2.5 M at 0.5 M NaOH and 35 degrees C. The values of k obs, obtained for alkaline hydrolysis of 2 within [NaOH] range 1.0 x 10(-2) to 2.0 M at 35 degrees C, follow the relationship k(obs) = kOH[HO(-)] + kOH'[HO (-)] (2) with least-squares calculated values of kOH and kOH' as (6.38 +/- 0.15) x 10(-5) and (4.59 +/- 0.09) x 10(-5) M (-2) s(-1), respectively. A few kinetic runs for aqueous cleavage of 1, N'-morpholino-N-(2'-methoxyphenyl)-5-nitrophthalamide (5) and N'-morpholino-N-(2'-methoxyphenyl)-4-nitrophthalamide (6) at 35 degrees C and 0.05 M NaOH as well as 0.05 M NaOD reveal the solvent deuterium kinetic isotope effect (= k(obs) (H 2) (O)/ k(obs) (D 2 ) (O)) as 1.6 for 1, 1.9 for 5, and 1.8 for 6. Product characterization study on the cleavage of 5, 6, and N-(2'-methoxyphenyl)-4-nitrophthalimide (7) at 0.5 M NaOD in D2O solvent shows the imide-intermediate mechanism as the exclusive mechanism.     

Generation of a peroxynitrato metal complex from nitrogen dioxide and coordinated superoxide

The reaction between photogenerated NO(2) radicals and a superoxochromium(III) complex, Cr(aq)OO(2+), occurs with rate constants k(Cr)(20) = (2.8 +/- 0.2) x 10(8) M(-)(1) s(-)(1) (20 vol % acetonitrile in water) and k(Cr)(40) = (2.6 +/- 0.5) x 10(8) M(-)(1) s(-)(1) (40 vol % acetonitrile) in aerated acidic solutions and ambient temperature. The product was deduced to be a peroxynitrato complex, Cr(aq)OONO(2)(2+), which undergoes homolytic cleavage of an N-O bond to return to the starting materials, the rate constants in the two solvent mixtures being k(H)(20) = 172 +/- 4 s(-)(1) and k(H)(40) = 197 +/- 7 s(-)(1). NO(2) reacts rapidly with 10-methyl-9,10-dihydroacridine, k(A)(20) = 2.2 x 10(7) M(-)(1) s(-)(1), k(A)(40) = (9.4 +/- 0.2) x 10(6) M(-)(1) s(-)(1), and with N,N,N',N'-tetramethylphenylenediamine, k(T)(40) = (1.84 +/- 0.03) x 10(8) M(-)(1) s(-)(1).     

Mechanisms of NO release by N1-nitrosomelatonin: nucleophilic attack versus reducing pathways

A new type of physiologically relevant nitrosamines have been recently recognized, the N(1)-nitrosoindoles. The possible pathways by which N(1)-nitrosomelatonin (NOMel) can react in physiological environments have been studied. Our results show that NOMel slowly decomposes spontaneously in aqueous solution, generating melatonin as the main organic product (k = (3.7 +/- 1.1) x 10(-5) s(-1), Tris-HCl (0.2 M) buffer, pH 7.4 at 37 degrees C, anaerobic). This rate is accelerated by acidification (k(pH 5.8) = (4.5 +/- 0.7) x 10(-4) s(-1), k(pH 8.8) = (3.9 +/- 0.6) x 10(-6) s(-1), Tris-HCl (0.2 M) buffer at 37 degrees C), by the presence of O(2) (k(o) = (9.8 +/- 0.1) x 10(-5) s(-1), pH 7.4, 37 degrees C, [NOMel] = 0.1 mM, P(O(2)) = 1 atm), and by the presence of the spin trap TEMPO (2,2,6,6-tetramethylpiperidine 1-oxyl; k(o) = (2.0 +/- 0.1) x 10(-4) s(-1), pH 7.4, 37 degrees C, [NOMel] = 0.1 mM, [TEMPO] = 9 mM). We also found that NOMel can transnitrosate to l-cysteinate, producing S-nitrosocysteine and melatonin (k = 0.127 +/- 0.002 M(-1) s(-1), Tris-HCl (0.2 M) buffer, pH 7.4 at 37 degrees C). The reaction of NOMel with ascorbic acid as a reducing agent has also been studied. This rapid reaction produces nitric oxide and melatonin. The saturation of the observed rate constant (k = (1.08 +/- 0.04) x 10(-3) s(-1), Tris-HCl (0.2 M) buffer, pH 7.4 at 37 degrees C) at high ascorbic acid concentration (100-fold with respect to NOMel) and the pH independence of this reaction in the pH range 7-9 indicate that the reactive species are ascorbate and melatonyl radical originated from the reversible homolysis of NOMel. Taking into account kinetic and DFT calculation data, a comprehensive mechanism for the denitrosation of NOMel is proposed. On the basis of our kinetics results, we conclude that under physiological conditions NOMel mainly reacts with endogenous reducing agents (such as ascorbic acid), producing nitric oxide and melatonin.     

Fast interstrand cross-linking of cisplatin-DNA monoadducts compared with intrastrand chelation: a kinetic study using hairpin-stabilized duplex oligonucleotides

The antitumor drug cisplatin forms two kinds of guanine-guanine cross-links with DNA: intrastrand, occurring mainly at GG sites, and interstrand, formed at GC sites. The former are generally more abundant than the latter, at least in experiments with linear duplex DNA. The formation of interstrand cross-links requires partial disruption of the Watson-Crick base pairing, and one could therefore expect the cross-linking reaction to be rather slow. In contrast with this expectation, kinetic measurements reported here indicate that interstrand cross-linking is as fast as intrastrand, or even faster. We have investigated the reactions between two hairpin-stabilized DNA duplexes, containing either a d(TGCA)(2) sequence (duplex TGCA) or a d(G(1)G(2)CA)-d(TG(3)CC) sequence (duplex GGCA), and the diaqua form of cisplatin, cis-[Pt(NH(3))(2)(H(2)O)(2)](2+), in an unbuffered solution kept at pH 4.5 +/- 0.1 and 20 degrees C. Using HPLC as the analytical method, we have determined the platination (first step) and chelation (second step) rate constants for these reaction systems. Duplex TGCA, in which the two guanines are quasi-equivalent, is found to be platinated very slowly (k=0.5 +/- 0.1M(-1)s(-1)) and to form the final interstrand cross-link very rapidly (k=13 +/- 3 x 10(-3) s(-11)). For GGCA, we find that G(1) is platinated rapidly (k=32 +/- 5M(-1)s(-1)) to form a long-lived monoadduct, which is only slowly chelated (k=0.039 +/- 0.001 x 10(-3) s(-1)) by G(2) (intrastrand), while G(2) is platinated one order of magnitude more slowly than G(1) (k=2.0 +/- 0.5M(-1)s(-1)) and chelated fairly rapidly both by G(1) (intrastrand: k=0.4 +/-0.1 x 10(-3) s(-1)) and G(3) (interstrand: k=0.2 +/- 0.1 x 10(-3) s(-1)); finally, G(3) is platinated at about the same rate as G(2) (k=2.4 +/- 0.5M(-1)s(-1)) and chelated very rapidly by G(2) (interstrand: k=10 +/- 4 x 10(-3) s(-1)). These results suggest that the low occurrence of interstrand cross-links in cisplatinated DNA is due to an extremely slow initial platination of guanines involved in d(GC)(2) sequences, rather than to a slow cross-linking reaction.     

Reactions of Cl*/Cl2*- radicals with the nanoparticle silica surface and with humic acids: model reactions for the aqueous phase chemistry of the atmosphere

Reactions of chlorine radicals might play a role in aqueous aerosols where a core of inorganic components containing insulators such as SiO2 and dissolved HUmic-LIke Substances (HULIS) are present. Herein, we report conventional flash photolysis experiments performed to investigate the aqueous phase reactions of silica nanoparticles (NP) and humic acid (HA) with chlorine atoms, Cl*, and dichloride radical anions, Cl2*-. Silica NP and HA may be taken as rough models for the inorganic core and HULIS contained in atmospheric particles, respectively. Both Cl* and Cl2*- were observed to react with the deprotonated silanols on the NP surface with reaction rate constants, k +/- sigma, of (9 +/- 6) x 10(7) M(-1) s(-1) and (7 +/- 4) x 10(5) M(-1) s(-1), respectively. The reaction of Cl* with the surface deprotonated silanols leads to the formation of SiO* defects. HA are also observed to react with Cl* and Cl2*- radicals, with reaction rate constants at pH 4 of (3 +/- 2) x 10(10) M(-1) s(-1) and (1.2 +/- 0.3) x 10(9) M(-1) s(-1), respectively. The high values observed for these constants were discussed in terms of the multifunctional heterogeneous mixture of organic molecules conforming HA.     

Seven-coordinate iron and manganese complexes with acyclic and rigid pentadentate chelates and their superoxide dismutase activity

The reactions of seven-coordinate [Fe(III)(dapsox)(H(2)O)(2)]ClO(4).H(2)O (1), [Fe(II)(H(2)dapsox)(H(2)O)(2)](NO(3))(2).H(2)O (2), and [Mn(II)(H(2)dapsox)(CH(3)OH)(H(2)O)](ClO4)2(H2O) (3) complexes of the acyclic and rigid pentadentate H(2)dapsox ligand [H2dapsox = 2,6-diacetylpyridinebis(semioxamazide)] with superoxide have been studied spectrophotometrically, electrochemically, and by a submillisecond mixing UV/vis stopped-flow in dimethyl sulfoxide (DMSO). The same studies were performed on the seven-coordinate [Mn(II)(Me(2)[15]pyridinaneN(5))(H(2)O)(2)]Cl(2).H(2)O (4) complex with the flexible macrocyclic Me(2)[15]pyridinaneN(5) ligand (Me(2)[15]pyridinaneN(5) = trans-2,13-dimethyl-3,6,9,12,18-pentaazabicyclo[12.3.1]octadeca-1(18),14,16-triene), which belongs to the class of proven superoxide dismutase (SOD) mimetics. The X-ray crystal structures of 2-4 were determined. All complexes possess pentagonal-bipyramidal geometry with the pentadentate ligand in the equatorial plane and solvent molecules in the axial positions. The stopped-flow experiments in DMSO (0.06% of water) reveal that all four metal complexes catalyze the fast disproportionation of superoxide under the applied experimental conditions, and the catalytic rate constants are found to be (3.7 +/- 0.5) x 10(6), (3.9 +/- 0.5) x 10(6), (1.2 +/- 0.3) x 10(7), and (5.3 +/- 0.8) x 10(6) M(-1) s(-1) for 1-4, respectively. The cytochrome c McCord-Fridovich (McCF) assay in an aqueous solution at pH = 7.8 resulted in the IC(50) values (and corresponding kMcCF constants) for 3 and 4, 0.013 +/- 0.001 microM (1.9 +/- 0.2 x 10(8) M(-1) s(-1)) and 0.024 +/- 0.001 microM (1.1 +/- 0.3 x 10(8) M(-1) s(-1)), respectively. IC(50) values from a nitroblue tetrazolium assay are found to be 6.45 +/- 0.02 and 1.36 +/- 0.03 microM for 1 and 4, respectively. The data have been compared with those obtained by direct stopped-flow measurements and discussed in terms of the side reactions that occur under the conditions of indirect assays.     

Structural characterization and formation kinetics of sitting-atop (SAT) complexes of some porphyrins with copper(II) ion in aqueous acetonitrile relevant to porphyrin metalation mechanism. Structures of aquacopper(II) and cu(II)-SAT complexes as determined by XAFS spectroscopy

The formation of the sitting-atop (SAT) complexes of 5,10,15,20-tetraphenylporphyrin (H(2)tpp), 5,10,15,20-tetrakis(4-chlorophenyl)porphyrin (H(2)t(4-Clp)p), 5,10,15,20-tetramesitylporphyrin (H(2)tmp), and 2,3,7,8,12,13,17,18-octaethylporphyrin (H(2)oep) with the Cu(II) ion was spectrophotometrically confirmed in aqueous acetonitrile (AN), and the formation rates were determined as a function of the water concentration (C(W)). The decrease in the conditional first-order rate constants with the increasing C(W) was reproduced by taking into consideration the contribution of [Cu(H(2)O)(an)(5)](2+) in addition to [Cu(an)(6)](2+) to form the Cu(II)-SAT complexes. The second-order rate constants for the reaction of [Cu(an)(6)](2+) and [Cu(H(2)O)(an)(5)](2+) at 298 K were respectively determined as follows: (4.1 +/- 0.2) x 10(5) and (3.6 +/- 0.2) x 10(4) M(-1) s(-1) for H(2)tpp, (1.15 +/- 0.06) x 10(5) M(-1) s(-1) and negligible for H(2)t(4-Clp)p, and (4.8 +/- 0.3) x 10(3) and (1.3 +/- 0.3) x 10(2) M(-1) s(-1) for H(2)tmp. Since the reaction of H(2)oep was too fast to observe the reaction trace due to the dead time of 2 ms for the present stopped-flow technique, the rate constant was estimated to be greater than 1.5 x 10(6) M(-1) s(-1). According to the structure of the Cu(II)-SAT complexes determined by the fluorescent XAFS measurements, two pyrrolenine nitrogens of the meso-substituted porphyrins (H(2)tpp and H(2)tmp) bind to the Cu(II) ion with a Cu-N(pyr) distance of ca. 2.04 A, while those of the beta-pyrrole-substituted porphyrin (H(2)oep) coordinate with the corresponding bond distance of 1.97 A. The shorter distance of H(2)oep is ascribed to the flexibility of the porphyrin ring, and the much greater rate for the formation of the Cu(II)-SAT complex of H(2)oep than those for the meso-substituted porphyrins is interpreted as due to a small energetic loss at the porphyrin deformation step during the formation of the Cu(II)-SAT complex. The overall formation constants, beta(n), of [Cu(H(2)O)(n)()(an)(6)(-)(n)](2+) for the water addition in aqueous AN were spectrophotometrically determined at 298 K as follows: log(beta(1)/M(-1)) = 1.19 +/- 0.18, log(beta(2)/M(-2)) = 1.86 +/- 0.35, and log(beta(3)/M(-3)) = 2.12 +/- 0.57. The structure parameters around the Cu(II) ion in [Cu(H(2)O)(n)(an)(6-n)](2+) were determined using XAFS spectroscopy.     

Reversibility of electron transfer in tryptophan-tyrosine peptide in acidic aqueous solution studied by time-resolved CIDNP

Time-resolved chemically induced dynamic nuclear polarization (CIDNP) has been used to study electron transfer reactions in tryptophan-tyrosine peptide under strongly acidic conditions. It is demonstrated that a decrease in pH from 2.4 to 1.6 reduces the overall efficiency of intramolecular electron transfer from the tyrosine residue to the oxidized tryptophan residue. A detailed analysis of the CIDNP kinetics revealed that the rate constant of this reaction k(f) stays unchanged upon pH variation, whereas the rate constant of electron transfer in the opposite direction k(r) increases with decreasing pH. The values of the rate constants extracted from model simulations are as follows: k(f) = (5.5 +/- 0.5) x 10(5) s(-1); k(r) = (5.5 +/- 1.0) x 10(4) s(-1) at pH 2.4, (1.2 +/- 0.2) x 10(5) s(-1) at pH 2.0, and (3.2 +/- 0.4) x 10(5) s(-1) at pH 1.6. The pH dependence of log K = log(k(f)/k(r)) is linear and allows for the determination of the difference between the one-electron reduction potentials of the tryptophanyl and tyrosyl radicals in the peptide. The efficiency of IET in acidic aqueous solution containing 10 M urea-d(4) was estimated.     

Kinetics and Mechanism of the Formation and Acid Dissociation of Cobalt(II), Nickel(II), and Copper(II) Complexes with the Highly Enolized beta-Diketone 3-(N-Acetylamido)pentane-2,4-dione (=Hamac) in Aqueous Solution

The beta-diketone Hamac = 3-(N-acetylamido)pentane-2,4-dione was characterized by potentiometric, spectrophotometric, and kinetic methods. In water, Hamac is very soluble (2.45 M) and strongly enolized, with [enol]/[ketone] = 2.4 +/- 0.1. The pK(a) of Hamac is 7.01 +/- 0.07, and the rate constants for enolization, k(e), and ketonization, k(k), at 298 K are 0.0172 +/- 0.0004 s(-1) and 0.0074 +/- 0.0015 s(-1), respectively. An X-ray structure analysis of the copper(II) complex Cu(amac)(2).toluene (=C(21)H(28)CuN(2)O(6); monoclinic, C2/c; a = 20.434(6), b = 11.674(4), c = 19.278(6) ?; beta = 100.75(1) degrees; Z = 8; R(w) = 0.0596) was carried out. The bidentate anions amac(-) coordinate the copper via the two diketo oxygen atoms to form a slightly distorted planar CuO(4) coordination core. Rapid-scan stopped-flow spectrophotometry was used to study the kinetics of the reaction of divalent metal ions M(2+) (M = Ni,Co,Cu) with Hamac in buffered aqueous solution at variable pH and I = 0.5 M (NaClO(4)) under pseudo-first-order conditions ([M(2+)](0) > [Hamac](0)) to form the mono complex M(amac)(+). For all three metals the reaction is biphasic. The absorbance/time data can be fitted to the sum of two exponentials, which leads to first-order rate constants k(f) (fast initial step) and k(s) (slower second step). The temperature dependence of k(f) and k(s) was measured. It follows from the kinetic data that (i) the keto tautomer of Hamac, HK, does not react with the metal ions M(2+), (ii) the rate constant k(f) increases linearly with [M(2+)](0) according to k(f) = k(0) + k(2)[M(2+)](0), and (iii) the rate constant k(s) does not depend on [M(2+)](0) and describes the enolization of the unreactive keto tautomer HK. The pH dependence of the second-order rate constant k(2) reveals that both the enol tautomer of Hamac, HE, and the enolate, E(-), react with M(2+) in a second-order reaction to form the species M(amac)(+). At 298 K rate constants k(HE) are 18 +/- 6 (Ni), 180 +/- 350 (Co), and (9 +/- 5) x 10(4) (Cu) M(-1) s(-1) and rate constants k(E) are 924 +/- 6 (Ni), (7.4 +/- 0.6) x 10(4) (Co), and (8.4 +/- 0.2) x 10(8) (Cu) M(-1) s(-1). The acid dissociation of the species M(amac)(+) is triphasic. Very rapid protonation (first step) leads to M(Hamac)(2+), which is followed by dissociation of M(Hamac)(2+) and M(amac)(+), respectively (second step). The liberated enol Hamac ketonizes (third step). The mechanistic implications of the metal dependence of rate constants k(HE), k(E), k(-HE), and k(-E) are discussed.     

Homolysis of the peroxynitrite anion detected with permanganate

The reaction of peroxynitrite with violet-colored MnO4- leads to the formation of green MnO42-. The rate constant for the reaction at pH 11.7, 5.5 mM ionic strength, and 25 degrees C, 0.020 +/- 0.001 s(-1), is independent of the MnO4- concentration; homolysis of ONOO- to NO* and O2*- is the rate-determining step. Both NO* and O2*- react with MnO4- with rate constants of (3.5 +/- 0.7) x 10(6) M(-1)s(-1) and (5.7 +/- 0.9) x 10(5) M(-1)s(-1), respectively. The activation volume and activation energy for breaking the N-O bond are 12.6 +/- 0.8 cm(3)mol(-1) and 102 +/- 2 kJ mol(-1), respectively. In combination with the known standard Gibbs energies of formation of NO* and O2*-, the rate of the reaction of NO* and O2*-, and the pKa of ONOOH, we find a standard Gibbs energy of formation of ONOO- of +68 +/- 1 kJ mol(-1), and of ONOOH of +31 +/- 1 kJ mol(-1).     

Mechanism of CO exchange on cis-[M(CO)2X2]- complexes (M=Rh,Ir;X=Cl, Br, or I)

The CO exchange on cis-[M(CO)2X2]- with M = Ir (X = Cl, la; X = Br, 1b; X = I, 1c) and M = Rh (X = Cl, 2a; X = Br, 2b; X = I, 2c) was studied in dichloromethane. The exchange reaction [cis-[M(CO)2X2]- + 2*CO is in equilibrium cis-[M(*CO)2X2]- + 2CO (exchange rate constant: kobs)] was followed as a function of temperature and carbon monoxide concentration (up to 6 MPa) using homemade high gas pressure NMR sapphire tubes. The reaction is first order for both CO and cis-[M(CO)2X2]- concentrations. The second-order rate constant, k2(298) (=kobs)[CO]), the enthalpy, deltaH*, and the entropy of activation, deltaS*, obtained for the six complexes are respectively as follows: la, (1.08 +/- 0.01) x 10(3) L mol(-1) s(-1), 15.37 +/- 0.3 kJ mol(-1), -135.3 +/- 1 J mol(-1) K(-1); 1b, (12.7 +/- 0.2) x 10(3) L mol(-1) s(-1), 13.26 +/- 0.5 kJ mol(-1), -121.9 +/- 2 J mol(-1) K(-1); 1c, (98.9 +/- 1.4) x 10(3) L mol(-1) s(-1), 12.50 +/- 0.6 kJ mol(-1), -107.4 +/- 2 J mol(-1) K(-1); 2a, (1.62 +/- 0.02) x 10(3) L mol(-1) s(-1), 17.47 +/- 0.4 kJ mol(-1), -124.9 +/- 1 J mol(-1) K(-1); 2b, (24.8 +/- 0.2) x 10(3) L mol(-1) s(-1), 11.35 +/- 0.4 kJ mol(-1), -122.7 +/- 1 J mol(-1) K(-1); 2c, (850 +/- 120) x 10(3) L mol(-1), s(-1), 9.87 +/- 0.8 kJ mol(-1), -98.3 +/- 4 J mol(-1) K(-1). For complexes la and 2a, the volumes of activation were measured and are -20.9 +/- 1.2 cm3 mol(-1) (332.0 K) and -17.2 +/- 1.0 cm3 mol(-1) (330.8 K), respectively. The second-order kinetics and the large negative values of the entropies and volumes of activation point to a limiting associative, A, exchange mechanism. The reactivity of CO exchange follows the increasing trans effect of the halogens (Cl < Br < I), and this is observed on both metal centers. For the same halogen, the rhodium complex is more reactive than the iridium complex. This reactivity difference between rhodium and iridium is less marked for chloride (1.5: 1) than for iodide (8.6:1) at 298 K.     

Cyclic voltammetry of the electron transfer reaction between bis(cyclopentadienyl)iron in 1,2-dichloroethane and hexacyanoferrate in water.

The electron transfer (ET) reaction between bis(cyclopentadienyl)iron(II) ([Fe(II)(C(5)H(5))2]) in 1,2-dichloroethane (1,2-DCE) and hexacyanoferrate redox couple ([Fe(II/III)(CN)6](4-/3-)) in water (W) at the interface has been studied by using cyclic voltammetry. The voltammetric results can be explained well by a theoretical equation for the so-called IT-mechanism, in which a homogeneous ET reaction between [Fe(C(5)H(5))2] (partially distributed from 1,2-DCE) and [Fe(CN)6](3-) takes place in the W phase and the resultant [Fe(C(5)H(5))2]+ ion is responsible for current passage across the interface. The forward rate constant of the homogeneous ET reaction, [Fe(C(5)H(5))2] + [Fe(CN)6](3-) = [Fe(C(5)H(5))2]+ + [Fe(CN)6](4-) in W phase, k(f)(IT), was determined to be (2.9 +/- 2.2)x 10(10) M(-1) s(-1), which was in good agreement with k(f)(IT) = (3.2 +/- 2.0)x 10(10) M(-1) s(-1), which had been determined by using normal-pulse voltammetry.     

Combination of a dinuclear Zn2+ complex and a medium effect exerts a 10(12)-fold rate enhancement of cleavage of an RNA and DNA model system

The catalytic ability of a dinuclear Zn2+ complex of 1,3-bis-N1-(1,5,9-triazacyclododecyl)propane (3) in promoting the cleavage of an RNA model, 2-hydroxypropyl-p-nitrophenyl phosphate (HPNPP, 1), and a DNA model, methyl p-nitrophenyl phosphate (MNPP, 4), was studied in methanol solution in the presence of added CH3O- at 25 degrees C. The di-Zn2+ complex (Zn2 :3), in the presence of 1 equiv of added methoxide, exhibits a second-order rate constant of (2.75 +/- 0.10) x 10(5) M(-1) s(-1) for the reaction with 1 at s(s)pH 9.5, this being 10(8)-fold larger than the k2 value for the CH3O- promoted reaction (kOCH3 = (2.56 +/- 0.16) x 10(-3) M(-1) s(-1)). The complex is also active toward the DNA model 4, exhibiting Michaelis-Menten kinetics with a KM and kmax of 0.37 +/- 0.07 mM and (4.1 +/- 0.3) x 10(-2) s(-1), respectively. Relative to the background reactions at s(s)pH 9.5, Zn2 :3 accelerates cleavage of each phosphate diester by a remarkable factor of 1012-fold. A kinetic scheme common to both substrates is discussed. The study shows that a simple model system comprising a dinuclear Zn2+ complex and a medium effect of the alcohol solvent achieves a catalytic reactivity that approaches enzymatic rates and is well beyond anything seen to date in water for the cleavage of these phosphate diesters.     

Kinetics and mechanism of methane, methanol, and dimethyl ether C-H activation with electrophilic platinum complexes

The relative rates of C-H activation of methane, methanol, and dimethyl ether by [(N-N)PtMe(TFE-d(3))](+) ((N-N) = ArN=C(Me)-C(Me)=NAr; Ar = 3,5-di-tert-butylphenyl, TFE-d(3) = CF(3)CD(2)OD) (2(TFE)) were determined. Methane activation kinetics were conducted by reacting 2(TFE)-(13)C with 300-1000 psi of methane in single-crystal sapphire NMR tubes; clean second-order behavior was obtained (k = 1.6 +/- 0.4 x 10(-3) M(-1) s(-1) at 330 K; k = 2.7 +/- 0.2 x 10(-4) M(-1) s(-1) at 313 K). Addition of methanol to solutions of 2(TFE) rapidly establishes equilibrium between methanol (2(MeOD)) and trifluoroethanol (2(TFE)) adducts, with methanol binding preferentially (K(eq) = 0.0042 +/- 0.0006). C-H activation gives [(N-N)Pt(CH(2)OD)(MeOD)](+) (4), which is unstable and reacts with [(RO)B(C(6)F(5))(3)](-) to generate a pentafluorophenyl platinum complex. Analysis of kinetics data for reaction of 2 with methanol yields k = 2.0 +/- 0.2 x 10(-3) M(-1) s(-1) at 330 K, with a small kinetic isotope effect (k(H)/k(D) = 1.4 +/- 0.1). Reaction of dimethyl ether with 2(TFE) proceeds similarly (K(eq) = 0.023 +/- 0.002, 313 K; k = 5.5 +/- 0.5 x 10(-4) M(-1) s(-1), k(H)/k(D) = 1.5 +/- 0.1); the product obtained is a novel bis(alkylidene)-bridged platinum dimer, [(diimine)Pt(mu-CH(2))(mu-(CH(OCH(3)))Pt(diimine)](2+) (5). Displacement of TFE by a C-H bond appears to be the rate-determining step for all three substrates; comparison of the second-order rate constants (k((methane))/k((methanol)) = 1/1.3, 330 K; k((methane))/k((dimethy)(l e)(ther)) = 1/2.0, 313 K) shows that this step is relatively unselective for the C-H bonds of methane, methanol, or dimethyl ether. This low selectivity agrees with previous estimates for oxidations with aqueous tetrachloroplatinate(II)/hexachloroplatinate(IV), suggesting a similar rate-determining step for those reactions.     

The stabilization of managese(III) by azide ions in aqueous solution

The evidences of spontaneous oxidation of Mn(II) by the dissolved oxygen in azide buffer medium, which is dependent on the N (-)(3)HN (3) concentration, suggested a formation of stable Mn(III) complexes due to marked colour changes. Spectrophotometric studies combined with coulometric generation of Mn(III), in presence of large excess of Mn(II), showed a maximum absorbance peak at 432 nm. The molar absorptivity increases with azide concentration (0.44-3.9 mol 1(-1)) from 3100 to 6300 mol(-1) 1 cm(-1), showing a stepwise complex formation. Potential measurements of the Mn(III) Mn(II) system in several azide aqueous buffers solutions: 1.0 x 10(-2) mol 1(-1) HN(3), (0.50-2.0 mol 1(-1)) N(-)(3) and 5.0 x 10(-2) mol 1(-1) Mn(II) and constant ionic strength 2.0 mol 1(-1), kept with sodium perchlorate, leads to the conditional potential, E(0')x, in several azide concentrations at 25.0 +/- 0.1 degrees C. Considering the overall formation constants of Mn(II) N (-)(3), from former studies, and the potential, E(0')s = 1.063 V versus SCE, for Mn(III) Mn(II) system in non-complexing media, it was possible to calculate the Fronaeus function, F(0)(L), and the following overall formation constants: beta(1) = 1.2 x 10(5) M(-1), beta(2) = 6.0 x 10(8) M(-2), beta(3) = (2.4 +/- 0.7) x 10(11) M(-3), beta(4) = (1.5 +/- 0.5) x 10(11) M(-4) and beta(5) = (9.6 +/- 0.8) x 10(11) M(-5) for the Mn(III) N (-)(3) complexes. These data give important support to understand the importance of Mn(II) and Mn(III) synergistic effect on the analytical method of S(IV) determination based on the Co(II) autoxidation.     

Thermodynamic and kinetic studies on the reaction between the vitamin B12 derivative beta-(N-methylimidazolyl)cobalamin and N-methylimidazole: ligand displacement at the alpha axial site of cobalamins

The equilibria and kinetics of substitution of the 5,6-dimethylbenzimidazole at the alpha site of beta-(N-methylimidazolyl)cobalamin by N-methylimidazole have been investigated, and the product, bis(N-methylimidazolyl)cobalamin, has been characterized by visible and 1H NMR spectroscopies. The equilibrium constant for (N-MeIm)Cbl+ + N-MeIm right harpoon over left harpoon (N-MeIm)2Cbl+ was determined by 1H NMR spectroscopy (9.6 +/- 0.1 M(-1), 25.0 degrees C, I = 1.5 M (NaClO4)). The observed rate constant for this reaction exhibits an unusual inverse dependence on N-methylimidazole concentration, and it is proposed that substitution occurs via a base-off solvent-bound intermediate. Activation parameters typical for a dissociative ligand substitution mechanism are reported at two different N-MeImT concentrations, 5.00 x 10(-3) M (DeltaH++ = 99 +/- 2 kJ x mol(-1), DeltaS++ = 39 +/- 5 J x mol(-1) x K(-1), DeltaV++ = 15.0 +/- 0.7 cm3 x mol(-1), and 1.00 M (DeltaH++ = 109.4 +/- 0.8 kJ x mol(-1), DeltaS++ = 70 +/- 3 J x mol(-1) x K(-1), DeltaV++ = 16.8 +/- 1.1 cm3 x mol(-1)). According to the proposed mechanism, these parameters correspond to the equation of (N-MeIm)2Cbl+ and the ring-opening reaction of the alpha-DMBI of (N-MeIm)Cbl+ to give the solvent-bound intermediate in both cases, respectively.     

Sensitized photoxygenation of piroxicam in neat solvents and solvent mixtures.

Detection of O(2)(1Delta(g)) phosphorescence emission, lambda(max)=1270 nm, following laser excitation and steady state methods were employed to determine the total rate constant, k(T), for the reaction between the non-steroidal anti-inflammatory drug piroxicam (PRX) and singlet oxygen in several solvents. Values of k(T) ranged from 0.048+/-0.003 x 10(6) M(-1) s(-1) in chloroform to 71.2+/-2.2 x 10(6) M(-1) s(-1) in N,N-dimethylformamide. The chemical reaction rate constant, k(R), was determined by using thermal decomposition of 1,4-dimethylnaphthalene endoperoxide as the singlet oxygen source. In acetonitrile, the k(R) value is equal to 5.0+/-0.4 x 10(6) M(-1) s(-1), very close to the k(T) value. This result indicates that, in this solvent, the chemical reaction corresponds to the main reaction path. Dependence of total rate constant on the solvent parameters pi* and beta can be explained in terms of a reaction mechanism that involves the formation of a perepoxide intermediate. Rearrangement of the perepoxide to dioxetane followed by ring cleavage and transacylation accounts for the formation of N-methylsaccharine and N-(2-pyridyl)oxamic acid, the main reaction products. Data obtained in dioxane-water (pH 4) mixtures with neutral enolic and zwitterionic tautomers of piroxicam in equilibrium show that the zwitterionic tautomer reacts with singlet oxygen faster than the enolic tautomer.     

Kinetics and mechanism of the cleavage of phthalic anhydride in glacial acetic acid solvent containing aniline

Apparent second-order rate constants (k(n)(app)) for the nucleophilic reaction of aniline (Ani) with phthalic anhydride (PAn) vary from 6.30 to 7.56 M(-1) s(-1) with the increase of temperature from 30 to 50 degrees C in pure glacial acetic acid (AcOH). However, the values of pseudo-first-order rate constants (k(s)) for the acetolysis of PAn in pure AcOH increase from 16.5 x 10(-4) to 10.7 x 10(-3) s(-1) with the increase of temperature from 30 to 50 degrees C. The values of k(n)(app) and k(s) vary from 5.84 to 7.56 M(-1) s(-1) and from 35.1 x 10(-4) to 12.4 x 10(-4) s(-1), respectively, with the increase of CH(3)CN content from 1% to 80% v/v in mixed AcOH solvents at 35 degrees C. The plot of k(s) versus CH(3)CN content shows a minimum (with 10(4) k(s) = 4.40 s(-1)) at 50% v/v CH(3)CN. Similarly, the variations of k(n)(app) and k(s) with the increasing content of tetrahydrofuran (THF) in mixed AcOH solvent reveal respective a maximum (with k(n)(app) = 17.5-15.6 M(-1) s(-1)) at 40-60% v/v THF and a minimum (with k(s) = approximately 0-1.2 x 10(-4) s (-1)) at 60-70% v/v THF. The respective values of DeltaH* and DeltaS* are 15.3 +/- 1.2 kcal mol(-1) and -20.1 +/- 3.8 cal K(-1) mol(-1) for k(s) and 1.1 +/- 0.5 kcal mol(-1) and -51.2 +/- 1.7 cal K(-1) mol(-1) for k(n)(app), while the values of k(n) (= k(n)(app)/f(b) with f(b) representing the fraction of free aniline base) are almost independent of temperature within the range 30-50 degrees C. A spectrophotometric approach has been described to determine f(b) in AcOH as well as mixed AcOH-CH(3)CN and AcOH-THF solvents. Thus, the observed data, obtained under different reaction conditions, have been explained quantitatively. An optimum reaction condition, within the domain of present reaction conditions, has been suggested for the maximum yield of the desired product, N-phenylphthalamic acid.     

Reaction of O2 with the hydrogen atom in water up to 350 degrees C

The reaction of the H* atom with O2, giving the hydroperoxyl HO2* radical, has been investigated in pressurized water up to 350 degrees C using pulse radiolysis and deep-UV transient absorption spectroscopy. The reaction rate behavior is highly non-Arrhenius, with near diffusion-limited behavior at room temperature, increasing to a near constant limiting value of approximately 5 x 10(10) M(-1) s(-1) above 250 degrees C. The high-temperature rate constant is in near-perfect agreement with experimental extrapolations and ab initio calculations of the gas-phase high-pressure limiting rate. As part of the study, reaction of the OH* radical with H2 has been reevaluated at 350 degrees C, giving a rate constant of (6.0 +/- 0.5) x 10(8) M(-1) s(-1). The mechanism of the H* atom reaction with the HO2* radical is also investigated and discussed.