Addition of the phenoxathiin cation radical to alkenes and nonconjugated dienes. Formation of (E)- and (Z)-(10-phenoxathiiniumyl)alkenes and (E)- and (Z)-(10-phenoxathiiniumyl)dienes on basic alumina

Addition of phenoxathiin cation radical (PO*+) to acyclic alkenes in acetonitrile (MeCN) solution occurred stereospecifically to form bis(10-phenoxathiiniumyl)alkane adducts. Stereospecific trans addition is ascribed to the intermediacy of an episulfonium cation radical. The alkenes used were cis- and trans-2-butene, cis- and trans-2-pentene, cis- and trans-4-methyl-2-pentene, cis- and trans-4-octene, trans-3-hexene, trans-3-octene, trans-5-decene, cis-2-hexene, and cis-2-heptene. The erythro bisadducts (compounds 6) were obtained with trans-alkenes, while threo bisadducts (compounds 7) were obtained with cis-alkenes. The assigned structures of 6 and 7 were consistent with their NMR spectra and, in one case, 6c (the adduct of trans-4-methyl-2-pentene) was confirmed with X-ray crystallography. Additions of PO*+ to 1,4-hexa-, 1,5-hexa-, 1,6-hepta-, and 1,7-octadiene gave bis(10-phenoxathiiniumyl)alkenes (compounds 8), the assigned structures of which were consistent with their NMR spectra. Each of these adducts lost a proton and phenoxathiin (PO) when treated with basic alumina in MeCN solution. Compounds 6 (from trans-alkenes) gave mixtures of (Z)- (9) and (E)-(10-phenoxathiiniumyl)alkenes (10) in which the (Z)-isomers (9) were dominant. On the other hand, compounds 7 (from cis-alkenes) gave mixtures of 9 and 10 in which, with one exception (the adduct 7c of cis-4-methyl-2-pentene), compounds 10 were dominant. The path to elimination is discussed. The alkenes 9 and 10 were characterized with NMR spectroscopy and, in one case (9a), with X-ray crystallography. Reactions of 8b-d with basic alumina gave mixtures of (E)- (13) and (Z)-(10-phenoxathiiniumyl)dienes (14), in which compounds 13 were dominant. The configuration of the product from 8a (the adduct of 1,4-hexadiene) could not be settled. Noteworthy features in the coupling patterns and chemical shifts in the NMR spectra of some of the adducts and their products are discussed and related to adduct conformations.     

Isomerization of alkenes in the presence of Pd(acac)2-BF3OEt2 catalytic system

Positional isomerization of alkenes was studied in the presence of Pd(acac)₂ + 20BF₃OEt₂ catalytic system. The reactivity of alkenes decreases in the following order: 1-hexene > 1-heptene > 2-methyl-1-pentene > 4-methyl-2-pentene (cis + trans).     

Rate constants for the gas-phase reaction of C5?C10 alkenes with ozone

The gas-phase reaction of ozone with C₅? C₁₀ alkenes(eight 1-alkenes, four 1,1-disubstituted alkenes, and cyclohexene) has been investigated at atmospheric pressure and ambient temperature (285–293 K). Cyclohexane was added to scavenge the hydroxyl radical, which forms as a product of the ozone-alkene reaction. The reaction rate constants, in units of 10^?18 cm³ molecule^?1 s^?1, are 9.6±1.6 for 1-pentene, 9.7±1.4 for 1-hexene, 9.4±0.4 for 1-heptene, 12.5±0.4 for 1-octene, 8.0±1.4 for 1-decene, 3.8±0.6 for 3-methyl-1-pentene, 7.3±0.7 for 4-methyl-1-pentene, 3.9±0.9 for 3,3-dimethyl-1-butene, 13.3±1.4 for 2-methyl-1-butene, 12.5±1.1 for 2-methyl-1-pentene, 10.0±0.3 for 2,3-dimethyl-1-butene, 13.7±0.9 for 2-ethyl-1-butene, and 84.6±1.0 for cyclohexene. Substituent effects on alkene reactivity are examined. Steric effect appear to be important for all 1,1-disubstituted alkenes as well as for those 1-alkenes that bear s-butyl and t-butyl groups. The results are briefly discussed with respect to the atomospheric persistence of the alkenes studied. © 1995 John Wiley & Sons, Inc.     

Detailed process of adsorption of alkanes and alkenes on zeolites

The adsorption of alkanes and alkenes on zeolites is investigated by comparing the adsorption characteristics for three types of zeolite: ferrierite, ZSM-5, and mordenite. The activation energy for the diffusion of propane and n-butane on ferrierite and the heat of adsorption of C(2)-C(4) alkanes and alkenes on zeolites and silica are estimated based on Fourier transform infrared spectroscopy, and the diffusion processes in the micropores are elucidated by comparing the results with previously reported activation energies for n-butene diffusion. The adsorption of 1-butene on mordenite is also examined. The structure and process of experimentally observable adsorption is found to differ depending on the type of zeolite and adsorbing molecule, reflecting differences in the sizes of molecules and pores. This differing behavior is utilized to interpret the elementary adsorption processes of alkanes and alkenes on zeolites.     

Adducts of phenoxathiin and thianthrene cation radicals with alkenes and cycloalkenes

Phenoxathiin cation radical perchlorate (PO.+ClO4(-)) added stereospecifically to cyclopentene, cyclohexene, cycloheptene, and 1,5-cyclooctadiene to give 1,2-bis(5-phenoxathiiniumyl)cycloalkane diperchlorates (4-7) in good yield. The diaxial configuration of the PO+ groups was confirmed with X-ray crystallography. Unlike additions of thianthrene cation radical perchlorate (Th.+ClO4(-)) to these cycloalkenes, no evidence for formation of monoadducts was found in the reactions of PO.+ClO4(-). This difference is discussed. Addition of Th.+ClO4(-) to five trans alkenes (2-butene, 2-pentene, 4-methyl-2-pentene, 3-octene, 5-decene) and four cis alkenes (2-pentene, 2-hexene, 2-heptene, 5-decene) gave in each case a mixture of mono- and bisadducts in which the configuration of the alkene was retained. Thus, cis alkenes gave erythro monoadducts and threo bisadducts, whereas trans alkenes gave threo monoadducts and erythro bisadducts. In these additions to alkenes, cis alkenes gave predominantly bisadducts, while trans alkenes (except for trans-2-butene) gave predominantly monoadducts. This difference is explained. 1,2-Bis(5-phenoxathiiniumyl)cycloalkanes (4-7) and 1,2-bis(5-thianthreniumyl)cycloalkanes underwent fast elimination reactions on activated alumina forming, respectively, 1-(5-phenoxathiiniumyl)cycloalkenes (8-11) and 1-(5-thianthreniumyl)cycloalkenes (12-16). Among adducts of Th.+ClO4(-) and alkenes, monoadducts underwent fast ring opening on alumina to give (5-thianthreniumyl)alkenes, while bisadducts underwent fast eliminations of H+ and thianthrene (Th) to give (5-thianthreniumyl)alkenes also. Ring opening of monoadducts was a stereospecific reaction in which the configuration of the original alkene was retained. Thus, erythro monoadducts (from cis alkenes) gave (E)-(5-thianthreniumyl)alkenes and threo monoadducts (from trans alkenes) gave (Z)-(5-thianthreniumyl)alkenes. Among bisadducts, elimination of a proton and Th occurred and was more complex, giving both (E)- and (Z)-(5-thianthreniumyl)alkenes. These results are explained. Configurations of adducts and (5-thianthreniumyl)alkenes were deduced with the aid of X-ray crystallography and (1)H and (13)C NMR spectroscopy. In the NMR spectra of (E)- and (Z)-(5-thianthreniumyl)alkenes, the alkenyl proton of Z isomers always appeared at a lower field (0.8-1.0 ppm) than that of E isomers.     

Determination of the adsorption model of alkenes and alcohols on sulfonic copolymer by inverse gas chromatography

The determination of a number of adsorption sites on sulfonated styrene-divinylbenzene copolymer for alkenes (propene, 1-butene, 1-pentene, 1-hexene, 1-heptene, isobutene, 2-methyl-1-butene, 2-methyl-2-butene, 2-methyl-1-pentene, 2-methyl-2-pentene and 2-methyl-2-hexene) and alcohols (methanol, ethanol and n-propanol, n-butanol, 2-butanol and tert-butanol) was performed by the saturation copolymer with vapors of adsorbate, by removing the excess of adsorbate from copolymer by blowing the inert gas through copolymer bed and by the desorption of adsorbed alcohol in the programmed increase of temperature. The adsorption measurements were performed on sulfonated ion-exchange resin (Amberlyst 15) with different concentrations of the acid group, which means with a varying number of adsorption sites. The following adsorption models for alkenes were suggested: the first in which one molecule of alkene is adsorbed by two sulfonic groups, for linear alcohols, the second in which one sulfonic group can adsorb one molecule of alcohol and for non-linear alcohols the third where one molecule of alcohol is adsorbed by two or more sulfonic groups.     

Homogeneous decatungstate-catalyzed photooxygenation of tetrasubstituted alkenes: a deuterium kinetic isotope effect study

The decatungstate W10O32(4-) homogeneous photocatalyzed oxygenation of tetrasubstituted alkenes has been mechanistically studied. In all cases, allylic hydroperoxides are the major products. The primary inter- and intramolecular as well as the remote delta-secondary deuterium kinetic isotope effects for the photooxidation of the 2,3-dimethyl-2-butene and 1,1,1-trideuterio-7-methyl-2-(trideuteriomethyl)octa-2,6-diene along with product analysis suggest a hydrogen abstraction in the rate-determining step. For comparison, singlet oxygen photosensitized oxidations of the above substrates were also studied.     

Carbanion addition to a metalated acetaldehyde. A new regiospecific alkene synthesis

The reaction of 2-[(dicarbonyl)(η⁵-cyclopentadienyl)iron]acetaldehyde with organolithium and Grignard reagents results in efficient addition to the aldehyde carbonyl. The intermediate alkoxides have been treated with tetrafluoroboric acid to give high yields of isolated η²-alkene complexes of the dicarbonyl(η⁵-cyclopentadienyl)iron cation. Using this procedure the following alkenes were produced as complexed ligands to iron in 50–90% yield: propene, 1-hexene, 3-methyl-1-pentene, 3,3-dimethyl-1-butene, 1,3-butadiene, and styrene.     

Monomer-isomerization polymerization. XVI. Monomer-isomerization polymerization of methylpentenes with Ziegler-Natta catalyst

The polymerizations of 4-methyl-1-pentene(4M1P), 4-methyl-2-pentene (4M2P), 2-methyl-2-pentene (2M2P), and 2-methyl-1-pentene (2M1P) with Ziegler-Natta catalyst have been investigated. Both 4M1P and 4M2P were found to polymerize with TiCl₃–(C₂H₅)Al catalyst to give high molecular weight poly(4M1P), while 2M2P and 2M1P did not give polymers with 4M1P units. However, when the polymerizations of 2M1P and 2M2P were carried out with ternary catalyst systems, TiCl₃–(C₂H₅)AlCl–(PPh₃)₂PdCl₂ and TiCl₃–(C₂H₅)AlCl–Ni(SCN)₂ polymers with 4M1P units were obtained in low yield. It was concluded that these four methylpentenes could polymerize with the monomer-isomerization polymerization mechanism to poly(4M1P). The results of the observed isomer distribution of methylpentenes recovered, and the rate of polymerization of four methylpentenes suggest that the isomerization from 2M1P to 4M1P with the above ternary catalyst systems might proceed via a direct one-step isomerization mechanism.     

Hafnocene catalysts for selective propylene oligomerization: efficient synthesis of 4-methyl-1-pentene by beta-methyl transfer

A series of hafnocene complexes (eta5-C5Me4R1)(eta5-C5Me4R2)HfCl2 with [R1, R2] = [H, H] (1), [Me, H] (2), [Me, Me] (3), [Et, Me] (4), [(i)Pr, Me] (5), [SiMe(3), Me] (6), [(t)Bu, Me] (7), [(n)Bu, Me] (8), [(i)Bu, Me] (9), [Et, Et] (10), [(n)Bu, (n)Bu] (11), [(i)Bu, (i)Bu] (12) was tested as catalyst precursors for propylene oligomerization. Upon activation with methylaluminoxane or [Ph(3)C][B(C(6)F(5))(4)]/Al(i)Bu(3), complexes 2-4 and 8-12 catalyzed the dimerization of propylene to produce 4-methyl-1-pentene with selectivities ranging from 23.9 to 61.6 wt % in the product mixture. The selectivity was dependent on the nature of the substituents R(1) and R(2), with the highest value found for (eta5-C5Me4(i)Bu)2HfCl2 (12). Rapid deactivation was observed for 5-7, whereas (eta5-C5Me4H)2HfCl2 (1) polymerized propylene. 4-Methyl-1-pentene is proposed to form by repeated 1,2-insertion of propylene into the hafnocene methyl cation, followed by selective beta-methyl elimination. Detailed analysis of the byproduct distribution (isobutene, 1-pentene, 2-methyl-1-pentene, 2,4-dimethyl-1-pentene, 4-methyl-1-heptene, 4,6-dimethyl-1-heptene), determined by gas chromatography, was performed with the aid of a stochastic simulation involving rate constants for the propagation by insertion, beta-hydride elimination, and beta-methyl elimination. The rate of termination is dependent on the structure of the growing chain of the active species as well as on the bulkiness of the cyclopentadienyl ligands. The selectivity highly depends on the reaction conditions (pressure, temperature, concentration of methylaluminoxane). The rates of beta-methyl elimination leading to 4-methyl-1-pentene were proportional to propylene pressure for 2-4 and 8-10 but practically independent from propylene pressure for the sterically bulkier derivatives 11-12.     

UV-vis and IR spectral characterization of persistent carbenium ions, generated upon incorporation of cinnamyl alcohols in the acid zeolites HZSM-5 and HMor

Cinnamyl alcohol (1) and two derivatives 2 and 3 have been incorporated in dehydrated HMor and HZSM-5 zeolites with the aim to characterize spectroscopically the corresponding carbocations generated within the solids. Product studies of the supernatant liquid phase combined with diffuse reflectance UV-vis and IR spectroscopy provide unequivocal evidence for the carbocations. Thus, cinnamyl alcohol (1) affords the 1,5-diphenylpentadienyl cation in HMor and HZSM-5 as a persistent species. In the case of HMor with larger pore dimensions the bulkier 1-(2'-cinnamyl)-3-phenylpropenyl cation was also spectroscopically detected. No persistent carbocation was observed when the alpha-methylcinnamyl alcohol (2) was incorporated in the acid zeolites, wherein a complete cyclization to 2-methylindene takes place. Finally, incorporation of 2-methyl-4-tolyl-3-buten-2-ol (3) in HZSM-5 allowed detection of the gem-dimethyl-subsituted p-methylcinnamyl cation, with a lifetime of hours. This cation is not persistent enough in HMor to be characterized. The present study illustrates how structurally related allylic substrates may give distinct carbenium ions whose persistence depends on the host-guest fit in the interior of the acid zeolites.     

Rate constants for the gas-phase reaction of ozone with 1, 1-disubstituted alkenes

The gas-phase reaction of ozone with eight alkenes including six 1,1-disubstituted alkenes has been investigated at ambient T (285–298 K) and p = 1 atm. of air. The reaction rate constants are, in units of 10⁻¹⁸ cm³ molecule⁻¹ s⁻¹, 9.50 ± 1.23 for 3-methyl-1-butane, 13.1. ± 1.8 for 2-methyl-1-pentene, 11.3 ± 3.2 for 2-methyl-1,3-butadiene (isoprene), 7.75 ± 1.08 for 2,3,3-trimethyl-1-butene, 3.02 ± 0.52 for 3-methyl-2-isopropyl-1-butene, 3.98 ± 0.43 for 3,4-diethyl-2-hexene, 1.39 ± 17 for 2,4,4-trimethyl-2-pentene, and >370 for (cis + trans)-3,4-dimethyl-3-hexene. For isoprene, results from this study and earlier literature data are consistent with: k (cm³ molecule⁻¹ s⁻¹) = 5.59 (+ 3.51, &minus 2.16) × 10⁻¹⁵ e^{(−3606±279/RT)}, n = 28, and R = 0.930. The reactivity of the other alkenes, six of which have not been studied before, is discussed in terms of alkyl substituent inductive and steric effects. For alkenes (except 1,1-disubstituted alkenes) that bear H, CH₃, and C₂H₅ substituents, reactivity towards ozone is related to the alkene ionization potential: In k<(10⁻¹⁸ cm³ molecule⁻¹ s⁻¹) = (32.89 ± 1.84) − (3.09 ± 0.20) IP (eV), n = 12, and R = 0.979. This relationship overpredicts the reactivity of C_≥3 1-alkenes, of 1,1-disubstituted alkenes, and of alkenes with bulky substituents, for which reactivity towards ozone is lower due to substituent steric effects. The atmospheric persistence of the alkenes studied is briefly discussed. © 1996 John Wiley & Sons, Inc.     

Cyclopropane intermediates in the rearrangement and fragmentation of olefinic molecular ions

Methyl loss from deuterium-labelled molecular ions of 4-methyl-2-pentene, 2-methyl-2-pentene and 1,1,2-trimethylcyclopropane has been investigated for metastable molecular ions and for molecular ions formed by charge exchange with COS⁺˙, XE⁺˙ and CO⁺˙. For metastable ion fragmentation reactions all three compounds exhibit very similar behavior and show specific and essentially equal loss of each of the original methyl groups as well as specific loss of a methyl where the hydrogens derive exclusively from the non-methyl hydrogens of the original molecules. The former results are interpreted in terms of interconversion of the three molecular ions through a ring-opened form of the trimethylcyclopropane molecular ion. The loss of the non-methyl hydrogens as CH₃ is interpreted in terms of isomerization to the 2,3-dimethyl-2-butene structure. With increasing internal energy direct allylic cleavage of the unrearranged methylpentene molecular ions increases in importance while the trimethylcyclopropane molecular ion shows an increased preference for loss of the C(2) methyl group. With increasing internal energy loss of the original non-methyl hydrogens as CH₃ decreases markedly in importance.     

The leading role of association in framework modification of highly siliceous zeolites with adsorbed methylamine.

Affinity index (AT value), adsorption heat, X-ray diffraction (XRD), and 13C and 29Si magic-angle spinning (MAS) NMR, FTIR, and Raman spectroscopies were used to study the interaction of highly siliceous MFI-, FAU-, and FER-type zeolites with adsorbed methylamine (MA). Compared with the data for methanol, the much higher AT values and adsorption heats, and significant changes in XRD patterns, 29Si MAS NMR spectra, and FTIR spectra for the zeolites after adsorption of MA, revealed a strong hydrogen-bonding interaction between the perfect framework of the zeolites and the adsorbed MAs. This interaction results from the fact that the H atom of the amine group attacks the [Si-O] framework to form a Si-OHN bond, which leads to the appearance of Si-N bonds in the zeolites at 323 K. Therefore, the zeolite framework can be modified with MA under mild conditions. The highly siliceous MFI zeolite and the H-ZSM-5 zeolite with SiO2/Al2O3=31:1 were modified with MA and investigated by temperature-programmed desorption of CO2. The modified zeolites exhibited greatly enhanced basic properties in comparison with those of the raw materials. The influence of defects in the zeolite on the adsorption and the interaction with MA is discussed.     

A comparison of intrazeolite and solution singlet oxygen Ene reactions of allylic alcohols

The singlet oxygen ene reactions of four allylic alcohols and for comparison an allylic ether have been examined both in solution and in zeolite Y. Brønsted acid sites in the zeolite were shown to induce decomposition of several of the allylic alcohols. Treatment of the zeolites with pyridine removed these acid sites and allowed intrazeolite reactions of the allylic alcohols without interference from decomposition. Control reactions with an allylic alcohol that is inert to decomposition provided evidence that the presence of pyridine in the zeolite labyrinth does not influence the product composition.     

四氢呋喃与全硅FER，MTN，MOR和MFI沸石骨架相互作用的计算机模拟

结合分子动力学（MD）方法和能量最小化（EM）方法模拟了四氢呋喃（THF） 分子作为模板剂与全硅FER，MTN，MOR和MFI沸石骨架的相互作用，判断其在这些沸 石中的最佳结合位置。在FER沸石中，THF优先占扰[8~26~26~45~8]笼。在MIN沸石 中，只能分布在[5~(126~4)]笼中。在MOR沸石中，位于十二元环孔道内时与骨架作 用较强，而在MFI沸石中，处于十元环弯曲孔道中作用较强。相对而言，该分子与 FER，MTN相互作用较强，与MOR，MFI的相互作用较强。根据模拟结果，计算THF分 子中氢、氧原子与骨架氧原子的质心距离，研究了该分子与骨架空腔和孔道的匹配 情况，讨论了THF诱导这些沸石形成的模板作用。     

小孔沸石微结构的CO_2吸附表征

以3种已知结构的小孔沸石3A、4A和5A为研究对象,以N2和CO2为吸附质,通过吸附数据测定,研究了小孔沸石微孔结构的吸附表征方法.结果表明,N2吸附无法检测4A沸石的孔,而CO2吸附可以检测.对于4A和5A沸石,在35s内CO2吸附就可以达到平衡.HK(Horvath-Kawazoe)柱状模型不能表征4A和5A沸石的孔结构,但是HK球形模型可以,基于最大吸附量、D-A(Dubinin-Astakhov)方程和Langmuir-Freundlich模型计算了4A和5A沸石的微孔孔容,其中根据最大吸附容量和D-A方程计算的微孔孔容与文献值最接近.     

用不同方法合成的钛硅分子筛TS-1的拉曼光谱研究

采用不同方法合成了钛硅分子筛ＴＳ－１,Ｒａｍａｎ光谱表征表明,不同方法合成的ＴＳ－１分子筛中钛的分散状态不同,当钛的含量低于１．５％,不同方法合成的ＴＳ－１中的钛主要以高分散状态存在,当钛含量达到２．０％以上时,不同方法合成的钛硅分子筛中钛的分散状态显著不同,其中以ＴｉＣｌ３合成的分子筛中骨架钛的含最高,而杂晶相锐钛矿含量最低,同时催化氯丙烯环氧化活性也最高,而以正钛酸四丁酯为钛源,在静止态下晶化的钛硅分子筛中锐钛矿含量最高,催化活性最低。     

化学液相沉积法调变沸石孔径及异构体择形分离

本文用化学液相沉积方法精细调变NaY沸石孔径, 在适当的溶剂中硅酯与沸石吸附水或表面羟基作用而沉积于沸石外表面, 沸石孔口有效地被缩小。制备了一系列氧化硅沉积量不同的SiNaY沸石, 红外光谱、比表面和孔体积测量结果表明随着沉积量增加沸石孔径逐渐缩小, 但沸石骨架结构、孔容和内表面性质基本不变。测定了SiNaY样品对于对二甲苯/1, 3, 5-三甲苯, β-甲基萘/α-甲基萘, 1, 2, 4-三甲苯/1, 3, 5-三甲苯, 对二甲苯/间二甲苯和对甲酚/间甲酚五类分子尺寸不同的液体混合体系的择形吸附行为, 发现SiNaY沸石对分子尺寸与沸石孔径相近的混合体系具有良好的择形选择吸附分离性能。     

Theoretical investigation of linalool oxidation

This study concerns the autoxidation of one of the most used fragrances in daily life, linalool (3,7-dimethyl-1,6-octadien-3-ol). It reacts with O2 to form hydroperoxides, which are known to be important contact allergens. Pathways for hydroperoxide formation are investigated by means of quantum mechanical electronic structure calculations. Optimized molecular geometries and harmonic vibrational frequencies are determined using density functional theory (DFT). Insight into how the addition of O2 to linalool occurs is obtained by establishing a theoretical framework and systematically investigating three smaller systems: propene, 2-methyl-2-butene, and 2-methyl-2-pentene. 2-Methyl-2-pentene was chosen as a model system and used to compare with linalool. This theoretical study characterizes the linalool-O2 biradical intermediate state, which constitutes a branching point for the further oxidation reactions pathways. Thus, the observed linalool oxidation product spectrum is discussed in terms of a direct reaction path, the ene-type mechanism, and the radical mechanism. The major hydroperoxide found in experiments is 7-hydroperoxy-3,7-dimethyl-octa-1,5-diene-3-ol, and the calculated results support this finding.