共查询到20条相似文献,搜索用时 93 毫秒
1.
近来,科学家设计和合成了系列分子水平的陀螺。类似于儿童的玩具陀螺仪,这种分子陀螺由一个转子、一个定子框架和连接定子和转子的轴组成。定子框架通过自身的刚性结构为中心转子的转动提供足够的内在自由度,得以对内部的转子实施保护。并使得分子陀螺成为一个理想的分子转子。当转子上有偶极距时,则可能在外来电、磁、光的刺激下进行定向转动,成为分子马达。化学家们通过X射线晶体衍射技术、动态核磁技术、理论计算化学、热力学分析等方法表征了分子陀螺的各种特征,并积极探索其潜在的应用价值。本文着重介绍分子陀螺,以及超分子陀螺仪的发展历史以及研究进展。 相似文献
2.
分子构造(constitution)是指分子中原子相互联结的方式和次序,过去长期以来称为分子结构((structure),根据国际纯粹和应用化学联合会的建议,改为“构造”。“结构”一词应用在广泛的范围,例如物质结构、原子的电子结构等等。 相似文献
3.
范特霍夫和列贝尔分别各自提出碳原子的四个价键指向一个正四面体的四个顶点概念确立后,1885年德国化学家拜尔(Baeyer,Adolphvon 1835-1917)发表价键的张力学说。他根据碳原子四个价键的正四面体模型,任何两个价键之间的正常角度应当是109o28',如图I所示。 相似文献
4.
5.
分子调控的概念及其意义 总被引:1,自引:0,他引:1
在分子识别的基础之上提出了分子调控的新概念,指出分子调控是外界因素对分子某些性质的指令性干预,是超分子体系所持有的功能,通过这种调控作用,可以有意识、有目的地控制分子的行为,并列举若干实例加以说明。 相似文献
6.
药物头孢氨苄分子模板聚合物水中结合性质的研究 总被引:15,自引:0,他引:15
采用分子模板技术合成了以头孢氨苄为模板分子以三氟甲基丙烯酸和4-乙烯基吡啶同时为功能单体的分子模板聚合物。将得到的棒状聚合物研磨过筛后,运用平衡结合实验研究了头孢氨苄分子模板聚合物的结合性质,Scatchard分析表明,在所研究的浓度范围内,在聚合物中形成了两类不同的结合位点。头孢氨苄分子模板聚合物与其化学组成相同的非模板聚合物相比,有很高的结合容量。底物选择性实验表明,与其它结构相似的药物相比, 相似文献
7.
8.
分子识别在分析化学中的应用 总被引:2,自引:0,他引:2
本文概述了分子模板理论的产生和发展,总结了分子模板技术在分析化学领域中的应用和发展趋势,同时对分子印渍技术的理论进行概述,并指出分子印渍技术在分析化学领域中的应用和发展情况,阐述了分子模板和分子印渍技在分子识别分析方面的应用前景,其将为各种物质的超微量分析提供更加讯捷,准确,方便的分析方法。 相似文献
9.
我们从(上)文看到,化学家们最初认为物质的性质只决定于物质的分子组成,后来逐渐认识到物质的性质除决定于物质的分子组成外,还决定于分子构造. 相似文献
10.
11.
Scanningtunnelingmicroscope(STM)hasrecentlybeenappliedtothestudyoftheadsorptionoforganicandbiologicalmoleculesinvariousenvironments,includingliquidcrystal(LC),onsurface.Inparticular,4_n_alkyl4′cyanobiphenyls(mCB,wheremisthenumberofcarbonsinthealkylgroup)on… 相似文献
12.
Ryuto Yasui Dr. Daiki Shimizu Prof. Kenji Matsuda 《Chemistry (Weinheim an der Bergstrasse, Germany)》2022,28(27):e202104242
The single-molecular conductance between two π-conjugated wires with and without a radical substituent has been compared. Specifically, methyl- and iminonitroxide-substituted 4-(biphenyl-4-yl)pyridine wires bound onto a porphyrin template were subjected to scanning tunneling microscopy (STM) apparent-height measurement at the interface between highly oriented pyrolytic graphite (HOPG) and octan-1-oic acid. Statistical analysis of the STM images revealed that the radical-substituted wire has 3.2±1.7-fold higher conductance than the methyl-substituted reference. Although density functional theory (DFT) calculation suggests that only 17 % of the SOMO is distributed on the wire moiety, the effect was significant. This study presents the potential of radical substituents to achieve high conductivity in molecular wires. 相似文献
13.
Wang LJ Zhou KG Tan L Wang H Shi ZF Wu GP Xu ZG Cao XP He HX Zhang HL 《Chemistry (Weinheim an der Bergstrasse, Germany)》2011,17(30):8414-8423
Understanding the effects of intermolecular interactions on the charge-transport properties of metal/molecule/metal junctions is an important step towards using individual molecules as building blocks for electronic devices. This work reports a systematic electron-transport investigation on a series of "core-shell"-structured oligo(phenylene ethynylene) (Gn-OPE) molecular wires. By using dendrimers of different generations as insulating "shells", the intermolecular π-π interactions between the OPE "cores" can be precisely controlled in single-component monolayers. Three techniques are used to evaluate the electron-transport properties of the Au/Gn-OPE/Au molecular junctions, including crossed-wire junction, scanning tunneling spectroscopy (STS), and scanning tunneling microscope (STM) break-junction techniques. The STM break-junction measurement reveals that the electron-transport pathways are strongly affected by the size of the side groups. When the side groups are small, electron transport could occur through three pathways, including through single-molecule junctions, double-molecule junctions, and molecular bridges between adjacent molecules formed by aromatic π-π coupling. The dendrimer shells effectively prohibit the π-π coupling effect, but at the same time, very large dendrimer side groups may hinder the formation of Au-S bonds. A first-generation dendrimer acts as an optimal shell that only allows electron transport through the single-molecule junction pathway, and forbids the other undesired pathways. It is demonstrated that the dendrimer-based core-shell strategy allows the single-molecule conductance to be probed in a homogenous monolayer without the influence of intermolecular π-π interactions. 相似文献
14.
Pera G Martín S Ballesteros LM Hope AJ Low PJ Nichols RJ Cea P 《Chemistry (Weinheim an der Bergstrasse, Germany)》2010,16(45):13398-13405
Herein trimethylsilane (TMS) is demonstrated to be an efficient binding group suitable for construction of metal-molecule-metal (M-mol-M') junctions, in which one of the metal contacts is an atomically flat gold surface and the other a scanning tunnelling microscopy (STM) tip. The molecular component of the M-mol-M' devices is an oligomeric phenylene ethynylene (OPE) derivative Me(3)Si C≡C{C(6)H(4)C≡C}(2)C(6)H(4)NH(2), featuring both Me(3)SiC≡C and NH(2) metal contacting groups. This compound can be assembled into Langmuir-Blodgett (LB) films on Au--substrates by surface binding through the amine groups. Alternatively, low coverage (sub-monolayer) films are formed by adsorption from solution. In the case of condensed monolayers top electrical contacts are formed to STM tips through the TMS end group. In low coverage films, single molecular bridges can be formed between the gold surface and a gold STM tip. The similarity in the I-V response of a one-layer LB film and the single molecule conductance experiments reveals several points of critical importance to the design of molecular components for use in the construction of M-mol-M' junctions. Firstly, the presence of neighbouring π systems does not have a significant effect on the conductance of the M-mol-M' junction. Secondly, in the STM configuration, intermolecular electron hopping does not significantly enhance the junction transport characteristics. Thirdly, the symmetric behaviour of the I-V curves obtained, despite the different metal-molecule contacts, indicates that the molecule is simply an amphiphilic electron-donating wire and not a molecular diode with strong rectifying characteristics. Finally, the conductance values obtained from the amine/TMS-contacted OPE described here are of the same order of magnitude as thiol anchored OPEs, making them attractive alternatives to the more conventionally used thiol-contacting chemistry for OPE molecular wires. 相似文献
15.
Sepideh Afsari Dr. Zhihai Li Prof. Dr. Eric Borguet 《Angewandte Chemie (International ed. in English)》2014,53(37):9771-9774
The conductivity of a single aromatic ring, perpendicular to its plane, is determined using a new strategy under ambient conditions and at room temperature by a combination of molecular assembly, scanning tunneling microscopy (STM) imaging, and STM break junction (STM‐BJ) techniques. The construction of such molecular junctions exploits the formation of highly ordered structures of flat‐oriented mesitylene molecules on Au(111) to enable direct tip/π contacts, a result that is not possible by conventional methods. The measured conductance of Au/π/Au junction is about 0.1 Go , two orders of magnitude higher than the conductance of phenyl rings connected to the electrodes by standard anchoring groups. Our experiments suggest that long‐range ordered structures, which hold the aromatic ring in place and parallel to the surface, are essential to increase probability of the formation of orientation‐controlled molecular junctions. 相似文献
16.
Brian D. Baker Cortés Dr. Mihaela Enache Dr. Kathrin Küster Florian Studener Dr. Tien-Lin Lee Nicolas Marets Prof. Dr. Véronique Bulach Prof. Dr. Mir Wais Hosseini Prof. Dr. Meike Stöhr 《Chemistry (Weinheim an der Bergstrasse, Germany)》2021,27(48):12430-12436
The self-assembly of a nickel-porphyrin derivative (Ni-DPPyP) containing two pyridyl coordinating sites and two pentyl chains at trans meso positions was studied with scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and low energy electron diffraction (LEED) on Au(111). Deposition of Ni-DPPyP onto Au(111) gave rise to a close-packed network for coverages smaller or equal to one monolayer as revealed by STM and LEED. The molecular arrangement of this two-dimensional network is stabilized via hydrogen bonds formed between the pyridyl's nitrogen and hydrogen atoms from the pyrrole groups of neighboring molecules. Subsequent deposition of cobalt atoms onto the close-packed network and post-deposition annealing at 423 K led to the formation of a Co-coordinated hexagonal porous network. As confirmed by XPS measurements, the porous network is stabilized by metal-ligand interactions between one cobalt atom and three pyridyl ligands, each pyridyl ligand coming from a different Ni-DPPyP molecule. 相似文献
17.
Ana Martín‐Lasanta Dr. Delia Miguel Trinidad García Prof. Dr. Juan A. López‐Villanueva Prof. Dr. Salvador Rodríguez‐Bolívar Dr. Francisco M. Gómez‐Campos Prof. Dr. Elena Buñuel Prof. Dr. Diego J. Cárdenas Dr. Luis Álvarez de Cienfuegos Prof. Dr. Juan M. Cuerva 《Chemphyschem》2012,13(3):860-868
One of the central issues of molecular electronics (ME) is the study of the molecule–metal electrode contacts, and their implications for the conductivity, charge‐transport mechanism, and mechanical stability. In fact, stochastic on/off switching (blinking) reported in STM experiments is a major problem of single‐molecule devices, and challenges the stability and reliability of these systems. Surprisingly, the ambiguous STM results all originate from devices that bind to the metallic electrode through a one‐atom connection. In the present work, DFT is employed to study and compare the properties of a set of simple acenes that bind to metallic electrodes with an increasing number of connections, in order to determine whether the increasing numbers of anchoring groups have a direct repercussion on the stability of these systems. The conductivities of the three polycyclic aromatic hydrocarbons are calculated, as well as their transmission spectra and current profiles. The thermal and mechanical stability of these systems is studied by pulling and pushing the metal–molecule connection. The results show that molecules with more than one connection per electrode exhibit greater electrical efficiency and current stability. 相似文献
18.
Seung‐Kyun Noh Jeong Heum Jeon Won Jun Jang Dr. Howon Kim Soon‐Hyeong Lee Min Wook Lee Prof. Jhinhwan Lee Prof. Seungwu Han Prof. Se‐Jong Kahng 《Chemphyschem》2013,14(6):1177-1181
The role of halogen bonds in self‐assembled networks for systems with Br and I ligands has recently been studied with scanning tunneling microscopy (STM), which provides physical insight at the atomic scale. Here, we study the supramolecular interactions of 1,5‐dichloroanthraquinone molecules on Au(111), including Cl ligands, by using STM. Two different molecular structures of chevron and square networks are observed, and their molecular models are proposed. Both molecular structures are stabilized by intermolecular Cl???H and O???H hydrogen bonds with marginal contributions from Cl‐related halogen bonds, as revealed by density functional theory calculations. Our study shows that, in contrast to Br‐ and I‐related halogen bonds, Cl‐related halogen bonds weakly contribute to the molecular structure due to a modest positive potential (σ hole) of the Cl ligands. 相似文献
19.
Dr. Oliver Guillermet Dr. Ather Mahmood Dr. Jianshu Yang Dr. Jorge Echeverria Judicael Jeannoutot Dr. Sebastien Gauthier Dr. Christian Joachim Dr. Frederic Chérioux Prof. Dr. Frank Palmino 《Chemphyschem》2014,15(2):271-275
Thermally activated rotation of single molecules adsorbed on a silicon‐based surface between 77 and 150 K has been successfully achieved. This remarkable phenomenon relies on a nanoporous supramolecular network, which acts as a template to seed periodic molecule rotors on the surface. Thermal activation of rotation has been demonstrated by STM experiments and confirmed by theoretical calculations. 相似文献