熔池表面形状对电弧电流密度分布的影响

电弧电流密度分布决定着电弧热流密度、电弧压力的分布,是了解焊接电弧物理本质,建立 焊接过程数学模型的基础.根据电弧物理的基本原理,建立了电弧电流密度在变形熔池表面 上的分布模型,定量分析了熔池表面形状对电流密度分布的影响规律.计算表明,电流密度 在电弧中心线附近呈双峰分布,在离开电弧中心线一定距离处变为单峰分布,熔池表面形状 对电流密度分布有明显的影响.基于该模型计算的焊缝几何形状与实测结果符合得较好. 关键词： 熔池表面变形 电流密度 分布模型     

基于低频部分元等效电路法的共地干扰

基于低频部分元等效电路（PEEC）模型计算接地回路电流和电势分布,研究分析了共地传导干扰机理。基于混合位积分方程建立了低频PEEC模型,并与边界元方法的结果对比验证其准确性。基于PEEC模型实现对导体中三维电流分布的计算,获得了典型大导体接地回路的电流分布,分析了频率对电流分布的影响特性。结果表明,地导体中电流分布主要集中在接地极附近,两接地极间会由于电感感抗的影响而呈现出电势差,揭示了接地回路中的共地传导干扰机理,建立的PEEC模型能够有效应用于共地干扰分析与抑制。     

THE CURRENT DISTRIBUTION IN THE BACK-BENDING REGION

The current distribution in the back-bending region is calculated based on the particlerotor model with particle number conservation. The results show that the sudden increase of aligned angular momentum in the backbending region corresponds to a drastic change of the current distribution.     

VHF current distribution on a cylindrical VLF antenna in a magnetoplasma

We obtain, solution for the current distribution on a linear antenna excited by a given e.m.f. The antenna is an infinitely, long, perfectly conducting cylinder immersed in a plasma and aligned with an external magnetic field. The obtained current distribution in the VLF band is contributed by the eigenmode guided by the cylinder and waves of the continuous spatial spectrum. We show that the current distribution of a sufficiently thin antenna is determined mainly by the eigenmode. The antenna current is calculated both analytically and numerically under ionospheric conditions. The validity criteria for using the transmission-line theory to obtain the current distribution on a linear antenna in a magnetoplasma are discussed. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 42, No. 8, pp. 750–764, August 1999.     

Distribution of transport current in a type-II superconductor studied by small-angle neutron scattering

We report small-angle neutron scattering measurements on the vortex lattice in a PbIn polycrystal in the presence of an applied current. Using the rocking curves as a probe of the distribution of current in the sample, we observe that vortex pinning is due to the surface roughness. This leads to a surface current that persists in the flux-flow region. We show the influence of surface treatments on the distribution of this current.     

Effect of current-induced magnetic field on magnetization dynamics in spin-torque nano-oscillator with point-contact geometry

We show micromagnetic simulation results for spin-torque nano-oscillator (STNO) with point-contact geometry. Numerical results obtained from three different models are compared in order to investigate the effect of current-induced Oersted field and non-uniform current distribution on the characteristics of STNO. It is found that the Oersted field and non-uniform current distribution affect the frequency and precession mode both qualitatively and quantitatively. An anisotropic emission of spin-waves is observed only when considering the Oersted field properly. Our results suggest that a realistic consideration of the current distribution and consequent Oersted field distribution is of critical important to design STNOs and to understand the characteristics of STNOs.     

蒙特卡罗模拟LED并联电路电流降额特性

利用蒙特卡罗方法对LED并联电路的电流降额特性进行了模拟,假设分档后的大功率白光LED的正向电压(VF)分布符合正态分布,研究了1×n(2≤n≤15)系列LED并联电路电流降额量(IP)的概率(P)分布。模拟结果表明,IP的概率分布函数偏离了正态分布,密度函数曲线最高值点的两侧不对称,左侧较右侧陡峭;随着LED并联数(n)的增加,概率密度函数沿IP增大的方向移动,并且越来越趋近于正态分布。当n一定时,IP随电路中出现LED承载电流超过其额定电流的概率增大而降低,降低的速度由快转慢;当P为0.01%～1%时,IP大约为20%～30%。当P一定时,IP随n的增加而增大;当n6时,IP的增大速度变缓。模拟结果可以推广到m×n阵列化互连大功率LED模组。     

环形等离子体平衡时维持场电流的计算

本文介绍一个计算轴对称任意截面环形等离子体平衡问题的方法。先选定等离子体边界和环电流分布,用有限元方法解平衡方程的边值问题。借助于虚壳原理,得到用平衡方程解表示的能够产生平衡时所需要的维持场的虚壳电流。计算虚壳电流在等离子体区的维持场,以它为根据,采用积分方程开拓,求等离子体区外某位形上的维持场电流分布。解决这个问题的主要困难是当磁场向外开拓时遇到了不适定问题。我们用奇异值分解方法解不适定的Fredholm第一类积分方程。这个方法能容易地找到稳定解,对解决这个平衡问题是简单有效的。我们以七种等离子体截面形状,三种电流分布为具体模型,在三种维持场电流分布位形上给出了维持场电流分布。还给出了维持场形态,维持场总电流与等离子体总电流的比较,并简单讨论了维持场对等离子体整体稳定性的影响。 关键词：     

Surface effect in a thin conductive strip

The distribution of current on a thin conductive strip situated in a variable electric field is investigated in the case in which the electric-field vector is parallel to the edges of the strip. It is shown that the current distribution across the strip depends essentially on its surface resistance. The distribution approaches uniformity at high surface resistances. At low resistances we observe displacement of the current toward the edges, an effect analogous to the surface effect in conductors of nonzero thickness. A current with a 90° phase lag behind the electric field is excited in the strip in addition to the current component in phase with the alternating electric field. The complex linear resistance of the strip is calculated as a function of surface resistance. Institute of High-Current Electronics, Siberian Division, Russian Academy of Sciences. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 1, pp. 92–95, January, 1997.     

Cardiac magnetic source imaging based on current multipole model

It is widely accepted that the heart current source can be reduced into a current multipole. By adopting three linear inverse methods, the cardiac magnetic imaging is achieved in this article based on the current multipole model expanded to the first order terms. This magnetic imaging is realized in a reconstruction plane in the centre of human heart, where the current dipole array is employed to represent realistic cardiac current distribution. The current multipole as testing source generates magnetic fields in the measuring plane, serving as inputs of cardiac magnetic inverse problem. In the heart-torso model constructed by boundary element method, the current multipole magnetic field distribution is compared with that in the homogeneous infinite space, and also with the single current dipole magnetic field distribution. Then the minimum-norm least-squares (MNLS) method, the optimal weighted pseudoinverse method (OWPIM), and the optimal constrained linear inverse method (OCLIM) are selected as the algorithms for inverse computation based on current multipole model innovatively, and the imaging effects of these three inverse methods are compared. Besides, two reconstructing parameters, residual and mean residual, are also discussed, and their trends under MNLS, OWPIM and OCLIM each as a function of SNR are obtained and compared.     

Experimental study of the effect of propellant asymmetrical distribution on anode current in a Hall effect thruster

This paper experimentally evaluated the effect of the disruption of the symmetrical distribution of the propellant on the characteristics of the anode current. The change in the asymmetry degree of the propellant distribution is achieved by supplying gas with a dual-cavity gas distributor. The results show that as the asymmetry degree increases, the magnitude of the anode current changes monotonically from a slow growth to a rapid growth, while the peak-to-peak value of the anode current exhibits a non-monotonic behavior. A preliminary analysis shows that the asymmetrical distribution of the propellant causes a nonuniform plasma generation along the azimuthal direction and consequently the appearance of an azimuthal electric field. The effect of the azimuthal electric field on the electron azimuthal drift as well as the induction of the electron axial drift are key factors that account for the change of the anode current and its oscillation.     

光子晶体垂直腔面发射激光器的电流分布研究

对氧化限制型外腔式光子晶体垂直腔面发射激光器注入到有源区的电流密度分布进行了分析研究.提出三维电流分布计算模型,研究了光子晶体结构对电流密度分布和器件串联电阻的影响.研究发现,光子晶体孔刻蚀深度越深,电流分布圆对称性越差,引起的串联电阻越大.不同光子晶体图案对电流分布的均匀性和圆对称性也有很大的影响.该模型对于研究、设计氧化限制型外腔式光子晶体垂直腔面发射激光器提供了一个有用的分析方法.     

电磁轨道炮铁磁材料对铜带内电流分布的影响

作为一种强磁场环境下的新概念动能武器,电磁轨道炮利用脉冲电磁力可加速宏观物体到超高速。然而,其导体内脉冲电流分布是不均匀的,严重时会影响轨道炮发射威力或发射可靠性。针对一种薄带状铜导体结构的复杂电磁轨道炮,根据导体内电流分布的邻近效应原理,提出了在铜导带两侧附加了铁护层的均匀电流方法,并建立了物理模型,利用商业软件对该模型进行了数值仿真,仿真分析结果表明:铁护层的加入,大幅提高了铜导体内电流均匀分布程度,提高了铜导体承载电流的能力。     

X-pinch负载分流关系研究

研究了X-pinch和回流柱之间的分流关系,以及两个X-pinch之间的分流关系。在X-pinch和回流柱的分流实验中,X-pinch上的电流与回流柱上的电流大体相等,这表明电流分布不只与X-pinch或回流柱的特性有关,而且也与它们所在回路的其他部分有关。在两个X-pinch之间的分流实验中,X-pinch上的电流与X-pinch本身的材料和直径几乎无关,这确认了电流分布与回路中X-pinch之外的部分有关。离绝缘柱远的X-pinch上的电流总是比离绝缘柱近的X-pinch上的电流略大一些,这是并联回路之间的互感造成的。     

增益导波垂直腔激光器注入电流空间分布及其对激光近场模式影响的理论分析和表征

依据导电介质的稳态电场理论建立了一种对增益导波型垂直腔半导体激光器注入电流矢量分析的三维解析模型. 计算研究了电流密度空间分布及其与顶面电注入环参量之间的相互关联性. 结果显示在两极之间存在一个载流子径向分布中心极大的区域. 由于激光功率与注入电流之间存在线性关系,因此,要使器件能够获得基模或中心均匀的光强输出以及尽可能低的阈值,应使激光有源层与载流子均匀分布的临界层重合. 计算结果对顶发射与底发射结构以及不同环参数下的载流子分布情况及对近场模式形成的影响进行了分析和讨论. 关键词： 垂直谐振腔激光器 注入电流 激光模式     

Measurement of the Current Distribution at the Anode in a Low-Current Vacuum Arc

The distribution of the current collected by a multiring anode is measured in a diffuse vacuum arc for several values of the arc current and the electrode separation. It is found that the distribution widens as the electrode separation increases. Comparison with previous measurements suggests an influence of the electrode geometry on the results.     

Ge组分分布对基区杂质非均匀分布的SiGe HBT温度特性的影响

众所周知, 双极型晶体管的设计主要是基区的设计. 一般而言, 基区的杂质分布是非均匀的. 本文首先研究了非均匀的杂质高斯分布对器件温度分布、增益和截止频率的温度特性的影响, 发现增益和截止频率具有正温度系数, 体内温度较高. 随后研究了基区Ge组分分布对这些器件参数的影响. 均匀Ge组分分布和梯形Ge组分分布的SiGe 异质结双极型晶体管增益和截止频率具有负温度系数, 具有较好的体内温度分布. 进一步的研究表明, 具有梯形Ge组分分布的SiGe 异质结双极型晶体管, 由于Ge组分缓变引入了少子加速电场, 不但使它的增益和截止频率具有较高的值, 而且保持了较弱的温度敏感性, 在增益、特征频率大小及其温度敏感性、体内温度分布达到了很好的折中.     

磁暴主相期间环电流分布特性模拟研究

磁暴主相期间对流电场驱动等离子体片中的能量粒子经历E×B漂移，被地磁场俘获形成环电流，在此理论基础上充分考虑电荷交换造成的环电流损失与离子沉降的影响，改善并验证了磁暴主相期间环电流离子分布模式.模拟了不同强度磁暴主相期间磁层环电流离子的分布特征，研究了部分环电流离子对对流电场的响应.结果表明：不对称的环电流是磁暴主相期间环电流的重要组成部分，其分布特性表现为晨昏不对称和日夜不对称以及离子投掷角分布的各向异性等.对流电场与能量离子通量强度和分布范围之间正相关.模拟结果与观测有很好的一致性，证明了模型的可行性 关键词： 部分(不对称)环电流 磁暴主相 离子通量分布 对流电场     

非欧姆注入单层有机发光器件低场下电流传导温度特性的数值研究

温度是影响有机发光器件特性的一个重要因素,考虑了电流的注入限制和体限制之后,运用数值方法,研究了在低电场下温度对单层有机发光器件的J-V特性以及电场和载流子在有机层中的分布的影响。结果表明,在一定电压下,温度升高时,器件电流增大,有机层中载流子及其梯度分布增大,电场强度分布梯度也增大。并且当温度逐渐升高时,器件的电流传导将趋向于体限制,而当温度逐渐降低时,器件电流传导将趋向于注入限制,此时有机层内各处电场强度趋于均匀。并且结果表明,数值结果与实验结果符合得比较好。     

高温超导电缆层电流分布对电缆稳态运行特性的影响分析

为了分析冷绝缘高温超导电缆层电流分布对其稳态运行特性的影响,提出超导电缆的等效电路模型,给出求解各层电流的矩阵方程,应用超导电缆的温度分布计算模型和边界条件,获得不同均流效果下的超导电缆最大载流能力和稳态径向温升,并与有限元计算结果进行对比。结果比较表明,各层电流均衡分布不仅能提高电缆的载流能力,而且可以降低超导电缆的稳态运行温升,提高了超导电缆在稳态运行时的稳定性。