Comparative analysis of laboratory accreditation in Bulgaria, Lithuania, Slovakia and Serbia and Montenegro

The development of an internationally recognized laboratory accreditation process, accompanied by a mutual recognition agreement (MRA), is an issue of great interest in Central and Eastern European countries. This paper presents a comparative analysis of laboratory accreditation in Bulgaria, Lithuania, Slovakia and Serbia and Montenegro. The basic analysis technique was preliminary laboratory accreditation assessment (PLAA). The analysis data were obtained via a questionnaire issued from January to June 2004, with the participation of accreditation bodies. Results from the study are presented in four sections: accreditation body standards, accreditation body organization, assessors and proficiency testing, and inter-laboratory comparisons. Research results for the countries were accessed using PLAA techniques and conformity/non conformity statements. The analysis verified that PLAA can provide low cost, rapid assessment of the key influencing factors in laboratory accreditation bodies.     

Measurement uncertainty—policy and guidance documents issued by accreditation bodies

ISO/IEC 17025 contains general requirements for the competence of calibration and testing laboratories, including those for the evaluation and reporting of measurement uncertainty. Some accreditation bodies have issued additional guidance documents and regulations related to uncertainty, five of which are briefly commented on here.Presented at Roche Diagnostics' Workshop on in vitro diagnostics directive. A Nordic event about the implication of traceability and uncertainty in practice, Helsinki, February 13, 2003.     

Certified reference materials for the quality control of environmental analysis within the standards,measurements and testing programme (formerly BCR)

A great number of analyses is performed every year, the results of which are used for many purposes, e.g. the quality of goods and food, the status of quality of the environment or the health of patients. The accuracy of these results is a prerequisite for a good interpretation of the data obtained. One of the most powerful tool for achieving quality control of chemical analysis is to use reference materials (RMs) and certified reference materials (CRMs). These materials are necessary for one or more of the following items: method validation (CRMs), monitoring of the state of statistical control (RMs), samples in inter-comparisons (RMs), etc. The requirements and use of RMs and CRMs in chemical analysis are described, with special emphasis on environmental analysis, and some examples of environmental materials currently in production within the Standards, Measurements and Testing Programme (formerly BCR) of the European Commission are given.     

Passive sampling and/or extraction techniques in environmental analysis: a review

The current state-of-the-art of passive sampling and/or extraction methods for long-term monitoring of pollutants in different environmental compartments is discussed in this review. Passive dosimeters that have been successfully used to monitor organic and inorganic contaminants in air, water, sediments, and soil are presented. The application of new approaches to the determination of pollutants at the sampling stage is discussed. The main milestones in the development of passive techniques for sampling and/or extraction of analytes, and in biomonitors used in environmental analysis, are summarized in this review. Passive samplers and biomonitors are compared.     

A combination of accreditation and certification in an evolving process at EMPA: A management system to meet ISO 9001, ISO 14001 and EN 45001

 The Swiss Federal Laboratories for Materials Testing and Research (EMPA) have established a quality assurance system based on EN 45001 which meets the requirements for accreditation of all EMPA's testing activities. As testing is only a part of EMPA's range of activities, and is performed in decentralised departments, the system does not satisfy the management needs. The fundamental reorganisation of EMPA's St. Gallen site was used as an opportunity to implement an overall process-oriented management system which also included quality and the needs for accreditation. Later, an environmental management system was added and then certified for ISO 9001 and 14001. The system consists of a "Management Manual" for the St. Gallen site and a customised "Quality Manual" for each department. One of the key elements is a comprehensive review and planning procedure covering all business aspects.     

Integrating accreditation, good laboratory practice and good manufacturing practice in an industrial analytical laboratory

 The Analytical Laboratory of BASF is a central service unit for chemical analysis which can be used by all departments within the company. It carries out routine as well as non-routine work and has a high amount of R&D orders. A quality system conforming with GMP rules was installed in the 1970s, followed by a GLP system about 6 years later. In 1995 an EN 45001 certificate was granted, which also stated the conformity with ISO 9002. A "types of test" orientated system was chosen for accreditation. This was better suited to the needs of a testing laboratory with a high amount of non-routine work than a purely test-procedure orientated accreditation. An integrated quality system has now been developed from these activities. It has partly common elements and partly differing elements taking into account specific regulations. For example, instrument calibration, staff training, validation of test procedures and the use of computerized systems are covered by uniform rules. Other elements such as handling of samples and report generation are arranged according to the individual requirements of the various standards. Rules and regulations are laid down in a system of documents which comprise the quality manual, general standard operating procedures (SOPs), laboratory-specific SOPs and test procedures. The quality system has been accepted by other accreditiation bodies on application of special accreditations (workplace safety, biodegradable polymers). But it has had no advantageous influence on getting GLP certification. An integrated system is very complex and requires appreciable resources. Management of processes and documentation can only be handled by extensive use of computers. Frequent training of staff and internal audits are necessary to keep the system at an acceptable level. In order to reduce the complexity of quality management regulations a harmonization of the different quality systems would be desirable. Received: 1 October 1998 · Accepted: 10 January 1999     

Chemical metrology, chemistry and the uncertainty of chemical measurements

Chemical results normally involve traceability to two reference points, the specific chemical entity and the quantity of this entity. Results must also be traceable back to the original sample. As a consequence, any useful estimation of uncertainty in results must include components arising from any lack of specificity of the method, the variation between repeats of the measurement and the relationship of the result to the original sample. Chemical metrology does not yet incorporate uncertainty arising from any lack of specificity from the method selected or the traceability of the result to the original sample. These sources of uncertainty may however have much more impact on the reliability of the result than will any uncertainty associated with the repeatability of the measurement. Uncertainty associated with sampling may amount to 50–1000% of the reported result. Chemical metrology must be expanded to include estimations of uncertainty associated with lack of specificity and sampling. Received: 29 May 2001 Accepted: 17 December 2001     

Exhaust gas analysers and optimised sampling, uncertainties and costs

Decision-making in the conformity assessment of exhaust gas analysers with due account of measurement uncertainty and limited sampling is considered. Risks of incorrect decisions where test results lie in the vicinity of a specification limit are assessed in terms of percentage probability and the costs of measurement and environmental consequences, with examples based on the metrological requirements on these analysers stipulated in the new EU Measurement Instrument Directive. An optimised uncertainty methodology is proposed for the first time in legal metrology based on quantitative testing of new instruments for type approval and initial verification, and gives valuable insight into traditional rules limiting uncertainty in conformity assessment in general. Further, an analysis of subsequent verification of exhaust gas analysers in use in society, leads to a new optimised uncertainty methodology based on attribute sampling.

Practical experience of simultaneous accreditation and certification acquired in RIVM's official medicines control laboratories

 This article presents an overview of the practical experience acquired in two governmental medicines control laboratories in the Netherlands which combine the application of EN 45001 and ISO 9002 standards in the regulatory field of quality and risk assessment, and quality control of medicines and medical devices. This practical experience also includes simultaneous accreditation and certification. The EN 45001 standard was applied to laboratory testing activities and the ISO 9002 standard to non-laboratory file assessment activities as these activities are not covered by the scope of EN 45001. It appears that a combined application of these standards is practicable because they complement each other well. EN 45001 strongly emphasises technical competence. ISO 9002, on the contrary, emphasises more strongly the efficiency of the management processes and customer requirements. Received: 1 October 1998 · Accepted: 21 December 1998     

Flexibilization of the scope of accreditation: an important asset for food and water microbiology laboratories

Beltest, the Belgian accreditation body, has investigated flexibilization of the scope of accreditation for chemistry laboratories and food and water microbiology laboratories. This flexibilization, synonymous with test-type accreditation, allows a laboratory to add new test methods or retry previous test methods without having to undergo a new audit by Beltest. It has been used for nearly ten years by German and Swiss accreditation bodies. Flexibilization permits the validation of methods and results, given that the competence of the particular laboratory is already well established. This new concept in microbiology allows client’s needs to be adequately met, and facilitates the quick establishment of a method in several laboratories at once in case of a public health crisis. The first laboratory to participate at this investigation on the flexibilization concept, as a test of the concept, was the Belgian reference laboratory for food microbiology.     

A practitioner's approach to the assessment of the quality of sampling, sample preparation, and subsampling

 The methodology of evaluating the performance of sampling, sample preparation, and subsampling is reviewed. The requirements to be set for a successful experiment are revisited. The central role of the reference method is explained, and so is the choice of the parameters and the measurement methods. Based on the principles of the "Guide to the expression of uncertainty in measurement" (GUM), a statistical model is developed that demonstrates the influence of the experimental design on the outcome of the assessment experiment. This relationship is often overlooked in practice, as it is hardly mentioned in written standards dealing with this kind of quality assessments. The statistical framework thus developed covers the statistical procedures commonly appearing in written standards. Finally, the issue of testing the significance of the bias obtained from the experiment is discussed. Received: 14 June 1997 · Accepted: 2 September 1997     

Modern automated microextraction procedures for bioanalytical,environmental, and food analyses

Sample preparation frequently is considered the most critical stage of the analytical workflow. It affects the analytical throughput and costs; moreover, it is the primary source of error and possible sample contamination. To increase efficiency, productivity, and reliability, while minimizing costs and environmental impacts, miniaturization and automation of sample preparation are necessary. Nowadays, several types of liquid-phase and solid-phase microextractions are available, as well as different automatization strategies. Thus, this review summarizes recent developments in automated microextractions coupled with liquid chromatography, from 2016 to 2022. Therefore, outstanding technologies and their main outcomes, as well as miniaturization and automation of sample preparation, are critically analyzed. Focus is given to main microextraction automation strategies, such as flow techniques, robotic systems, and column-switching approaches, reviewing their applications to the determination of small organic molecules in biological, environmental, and food/beverage samples.     

化学品安全知识与应急科普宣传研究

Based on the theme of chemical awareness and safety accident response capability, this paper conducts a questionnaire survey for college students. In response to the survey results, scientific, popular, and novel offline activities/online publicity will be used to popularize chemical basics, relevant laws and regulations, and chemical safety accident emergency response methods for university students. The aim is to improve the level of understanding of various types of chemicals among college students. In the event of sudden chemical safety incidents, corrective measures can be taken, and useful information can be accurately identified after a chemical accident.     

化工,石油产品及硅酸盐分析

本文是《分析试验室》定期评述中“化工，石油产品及硅酸盐分析”课题的第五次评述。它评述了１９９３年７月至１９９５年６月国内关于化工产品，石油产品，硅酸盐的分析进展情况及我国化工，石油及硅酸盐产品标准，共引用文献５３９篇。     

Chemical fingerprint analysis for quality assessment and control of Bansha herbal tea using paper spray mass spectrometry

Chemical fingerprinting methodology is an approach for quality assessment and control of herbal medicines and related products based on the holistic chemical profile obtained by various analytical techniques. This study demonstrates the first application of paper spray mass spectrometry (PS-MS) as a chemical fingerprinting methodology for tracing the origins, establishing the authenticity, and assessing the overall quality of a famous herbal product, Bansha herbal tea (BHT). A negative ion PS-MS spectrum yielded the best chemical profiling information and was most appropriate for fingerprint analysis of BHT. In addition to the identification of active ingredients, various compounds present in BHT were simultaneously detected without any sample pretreatment and chromatographic separation, providing valuable information for the quality assessment and control of this herbal product. According to the principal component analysis of the PS-MS fingerprints, two sources of commercially available BHT products made by different manufacturers were easily differentiated. Qualified and expired products from the two manufacturers were also successfully distinguished, and the consistency of the quality between the manufacturers was assessed. Our experimental data demonstrated that the PS-MS chemical fingerprinting is a simple, rapid, and robust methodology for pharmaceutical analysis, with promising prospects for quality assessment and control of herbal medicines and related products with high-throughput.     

Flow Injection Analysis Using Potassium Permanganate: An Approach for Measuring Chemical Oxygen Demand in Organic Wastes and Waters

Abstract

A rapid and continuous analytical method based on flow injection analysis was developed for the determination of chemical oxygen demand due to organic substances in water pollution. Potassium permanganate and sulfuric acid solutions were individually pumped up as an oxidizing agent and glucose was used as a standard substance. The results for filtered organic waste and water samples were as reasonable as compared to those measured by the manual acidic permanganate method.     

Determination of soluble ions and elements in ambient air suspended particulate matter: Inter-technique comparison of XRF, IC and ICP for sample-by-sample quality control

In this paper, we describe a validation procedure for chemical fractionation analysis of elements (Al, As, Ba, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, S, Sb, Si, Sr, Ti and V) and soluble ions (Cl⁻, NO₃⁻, SO₄²⁻, Na⁺, NH₄⁺, Mg²⁺, Ca²⁺) in suspended particulate matter (PM). The procedure applies three distinct measurement techniques (XRF, IC and ICP-OES) to the analysis of individual samples. The techniques used generate different outputs at different stages in the procedure. This makes it possible to identify the contributions of specific parameters to measurement uncertainty. On this basis, we propose a scheme for controlling the analytical quality of data from individual samples in which inter-technique comparisons is used in the same way many analytical methods use surrogates. We apply this scheme to about 310 samples of PM₁₀ and PM_2.5 identifying and assessing the main factors contributing to measurement uncertainty. This procedure successfully resolved a number of difficulties frequently encountered during the analysis of PM, including lack of appropriate reference materials and the low reliability of alternative techniques of quality control. The results demonstrate the critical importance of sample treatment prior to destructive analysis by IC and ICP.     

Accuracy of electrospun fiber diameters: The importance of sampling and person-to-person variation

Potential sampling errors (regional variation) on an electrospun mat were explored and person-to-person (analyst affect) variation in image analysis of the fiber diameter were investigated via detailed statistical analyses. Scanning electron microscope (SEM) samples were prepared from the vertical midline of a single non-woven mat of electrospun polyethylene oxide. Thirteen analysts with identical training and instructions measured the diameters of the nanofibers from the six SEM images and statistical analyses were performed on the resulting data. The fiber diameters were significantly different in the lower region than the upper and center regions. Furthermore, the fiber diameters in the lower region—from micrographs taken only millimeters apart—were statistically different demonstrating a statistically significant regional variation in the sample. Furthermore, statistically significant variation between the analysts also was observed, with the average fiber diameter ranging from 166 nm to 276 nm.     

Compliance with legal requirements: definition of limits, sampling and measurement uncertainty

In many cases compositional requirements for foodstuffs (e.g. limits for the fat, protein, dry matter, or water content) are established by legislation. Adequate compliance testing is possible only if limits are clearly defined, taking measurement and sampling uncertainty into consideration. Furthermore, decisions on compliance must be based on samples which reflect the composition of the quantity to be evaluated. The resulting sample sizes are normally regarded by food inspection authorities as being much larger than acceptable. Consequently, an alternative strategy should be developed. Autocontrol data (i.e. inspection results obtained by the factory) in principle provide an adequate data basis for decisions on compliance. However, they must be reliable and the food inspection authority must have access to these data on request. Using these data and on condition that they show an approximate normal distribution, an inspection strategy based on arithmetic mean and standard deviation can be developed. Reliable and transparent decisions on compliance can thus be made. In many cases an adequate verification of food authenticity requires a comparison of raw material and product composition. Maximum acceptable differences, taking the relevant sources of variation into consideration, have to be defined and should be used instead of limits. Received: 17 April 2002 Accepted: 23 June 2002