A chromatographic method for baicalin quantification in rat thalamus

A rapid reversed-phase high-performance liquid chromatographic (rp-HPLC) assay for the determination of baicalin in rat thalamus was developed. This was carried out on a Hypersil -C(18) column using 4-nitro-benzoic acid as the internal standard with a mobile phase of methanol-water-H(3)PO(4) (45:55:0.2, v/v/v). Detection was by UV at 277 nm. The calibration curve for baicalin was linear (r=0.9992) over the concentration range of 0.05--4.0 microg/mL and the limit of detection was 10 ng/mL. The coefficients of variation of intra- and inter-day assays were 2.64, 5.19 and 3.19% and 3.46, 6.21 and 5.58% at concentrations of 0.5, 1.0 and 3.0 microg/mL, respectively. The recoveries of baicalin from rat thalamus were 85.4+/- 5.62, 90.7+/- 2.43 and 89.1+/- 4.75% at concentrations of 0.5, 1.0 and 3.0 microg/mL, respectively. The method was applied to determine the time course of baicalin in rat thalamus, following a single dosage of intravenous administration of Scutellariae radix extract at 90 mg/kg of baicalin to male Wistar rats.     

A new high-throughput LC-MS method for the analysis of complex fructan mixtures

In this paper, a new liquid chromatography-mass spectrometry (LC-MS) method for the analysis of complex fructan mixtures is presented. In this method, columns with a trifunctional C18 alkyl stationary phase (T3) were used and their performance compared with that of a porous graphitized carbon (PGC) column. The separation of fructan isomers with the T3 phase improved clearly in comparison with the PGC phase, and retention times were lower and more stable. When the T3-based method was applied on a wheat grain extract, multiple fructan isomers could be discerned, even for fructans with a degree of polymerization of 10. This indicates that wheat grain fructans do not, or not only, have a simple linear structure. The presented method paves the way for elucidation of fructan structures in complex mixtures that contain many structural isomers.     

A novel thin-layer chromatography-based method for Brazilin quantification

JPC – Journal of Planar Chromatography – Modern TLC - Brazilin, a constituent of the Chinese medicine heartwood, exhibits pronounced anti-tumor effects. To date, brazilin quantification...     

A novel method for the filterless preconcentration of iron

A novel method of analysis of iron by filterless preconcentration is presented. This is the first example of efficient preconcentration of a refractory transition metal where coprecipitation and columns were omitted. The method applies a manifold of flow injection analysis (FIA) to iron species that are preconcentrated on the inner walls of a tubular reactor. It was found that the adsorption of iron species to the walls was particularly pronounced in reactors of nylon material and enrichment factors of 30-35 could be attained, as dependent on the length of the reactor and on the time of preconcentration. In the preconcentration step of the FIA accessory, the optimum efficacy was obtained when the acidity of the samples was adjusted by HCl to pH = 2.5 whereas the ammonia preconcentration buffer should be kept alkaline at pH = 9.8. After being preconcentrated on the tubular reactor, the iron species were eluted by hydrochloric acid and analysed by flame atomic absorption spectrometry (FAAS). An unprecedented low limit of detection (LOD, 3sigma) of 1.8 microg L(-1) was thus obtained for the analysis of iron by FAAS, and the calibration line was linear up to 100 microg L(-1). A high sampling frequency of 40 per hour was obtained and the protocol allowed analysis of small amounts of iron in drinking water, in digested samples and in saline water. The major influence of interferences originated from ligands that are known to complex strongly to iron species. The method thus developed was uncomplicated in operation and it exhibited an excellent long-term stability and a high selectivity. Further, it was environmentally safe owing to production of non-toxic waste disposals. Equally high enrichment factors (EF) were obtained for Fe(ii) and Fe(iii), which is explained by the very low solubility product of both species.     

Pollution-free method for the determination of iron in iron ore

A method for the determination of total iron in iron ores and concentrates is described which avoids the use of mercuric chloride. The sample is decomposed either by an acid attack or by fusion with sodium peroxide. The hot sample solution in about 6M hydrochloric acid is treated with hot 10% stannous chloride solution till pale yellow, followed by addition of a slight excess of 2% titanous chloride solution; the excess is then oxidized with perchloric acid (1 + 1). The solution is rapidly cooled in ice-water, and the iron (II) is titrated with potassium dichromate (sodium diphenylsulphonate as indicator). The results show the same degree of precision, accuracy, and degree of interference as those obtained by the standard stannous chloride-mercuric chloride method.     

A high-throughput optical screening method for the optimization of colloidal water oxidation catalysts

A high-throughput method has been developed for screening and optimization of colloidal water oxidation catalysts. The catalysts are irradiated in parallel by visible light from an overhead projector in solutions containing tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)(3)(2+)) and persulfate. The array of reaction solutions is held in a 96-well plate, and absorbance readings are taken intermittently using a bioassay plate reader. The absorbance at 430 nm is indicative of the amount of Ru(bpy)(3)(2+) remaining in solution. The best catalysts give the most persistent absorbance, because the oxygen evolution reaction is kinetically competitive with decomposition of Ru(bpy)(3)(3+). Reagent concentrations were varied using a factorial design-of-experiment approach in order to optimize reaction conditions for a IrO(2).xH(2)O colloidal catalyst. A higher colloid concentration, a lower Ru(bpy)(3)(2+) concentration, and a higher pH buffer doubled the number of turnovers relative to the original conditions. Metal oxide colloids consisting of IrO(2).xH(2)O doped with varying amounts of Pt, Ru, and Os were made using a parallel microwave synthesis technique and were tested both by the parallel screening method and by direct measurement of oxygen evolution. The correlation between the two methods was good, with Ir-Pt-Os oxide compositions showing the highest activity. The effect of adding small amounts of Pt and Os to IrO(2).xH(2)O appears to be predominantly to reduce the particle size of the colloids.     

A spectrophotometric method for quantitative determination of lactulose in pharmaceutical preparations

A simple spectrophotometric assay for the quantification of lactulose in pharmaceutical preparations was developed. The method is based on hydrolysis of lactulose under acidic conditions. The hydrolyzed product reacts with resorcinol, giving absorption peaks at 398 and 480 nm. Both absorption wavelengths can be used for the determination of lactulose. The limit of detection of lactulose at 398 nm and 480 nm was 0.075 μg mL⁻¹ and 0.65 μg mL⁻¹, respectively. The calibration was linear in the range of 5–25 μg mL⁻¹. Analytical conditions were optimized, and the method was validated for analysis of pharmaceutical preparations. The determined amount of lactulose was found to be in good agreement with labeled claims in commercial products. The proposed method is economical, convenient, and suitable for the quantification of lactulose in pharmaceutical preparations. The text was submitted by the authors in English.     

A new kinetic method for quantification phenoxyl free radicals

In this work, a new kinetic method was proposed for quantification phenoxyl radicals generated in enzyme reaction. Instead of direct detecting the spectral signals of phenoxyl radicals, a molecular probe, the reduced form of nicotinamide adenine dinucleotide (NADH), was employed to indicate the formation of phenoxyl free radicals. It was found that the reactions of NADH and phenoxyl radicals are very fast, but can be followed by using stopped-flow fast scanning spectrophotometric technique. The initial rate of accelerated-oxidation of NADH represents the reactivity of phenoxyl free radical, which is proportional in a certain range to the initial concentration of the parent chlorophenols of the radicals. With this method, the phenoxyl radicals generated in oxidation reaction of chlorophenols (2-CP; 4-CP; 2,4-DCP; 2,4,6-TCP and 2,3,4,6-Tetra-CP) with hydrogen peroxide, catalyzed by horseradish peroxidase, were investigated. The method is highly sensitive. Phenoxyl radicals generated from as low as 1 × 10⁻⁸ M 2,4-DCP, for example, can be readily detected with the proposed method. The results show that the reactivity of various phenoxyl radicals are in the following order: 2,4-DCP > 4-CP > 2-CP > 2,4,6-TCP > 2,3,4,6-Tetra-CP. A mechanism is proposed to explain the possible pathway of the probe reaction. The feasibility of this method was assessed by the determination of enzymatic generation of phenoxyl radicals in lake water samples.     

A high-throughput method for GMO multi-detection using a microfluidic dynamic array

The ever-increasing production of genetically modified crops generates a demand for high-throughput DNA-based methods for the enforcement of genetically modified organisms (GMO) labelling requirements. The application of standard real-time PCR will become increasingly costly with the growth of the number of GMOs that is potentially present in an individual sample. The present work presents the results of an innovative approach in genetically modified crops analysis by DNA based methods, which is the use of a microfluidic dynamic array as a high throughput multi-detection system. In order to evaluate the system, six test samples with an increasing degree of complexity were prepared, preamplified and subsequently analysed in the Fluidigm system. Twenty-eight assays targeting different DNA elements, GM events and species-specific reference genes were used in the experiment. The large majority of the assays tested presented expected results. The power of low level detection was assessed and elements present at concentrations as low as 0.06 % were successfully detected. The approach proposed in this work presents the Fluidigm system as a suitable and promising platform for GMO multi-detection.     

Patterning of lactoferrin using functional SAMs of iron complexes

A new method has been developed that allows spatially resolved adsorption of lactoferrin on a surface, by means of specific non-covalent interaction between the native protein and a patterned self-assembled monolayer of an iron-containing terpyridine complex.     

A direct titrimetric method for the microdetermination of some phenothiazine derivatives in pharmaceutical preparations

A micro method has been developed for the determination of some phenothiazine derivatives in pure form and in pharmaceutical preparations, 1-5 mg of sample being titrated directly with 0.02M N-bromosuccinimide, with Methyl Red as indicator. The error does not exceed +/-1%.     

Hydride generation atomic absorption spectrometry for the quantification of germanium in iron meteorites

A simple and inexpensive hydride generation atomic absorption spectrometric procedure was developed for the quantification of germanium in iron meteorites. The final procedure involved dissolving the meteorite in nitric acid, dilution with water, addition of citrate to buffer the solution and complex the iron and liberation of germanium hydride with sodium tetrahydroborate. The hydride was collected in a liquid air trap and fed into a nitrogen-hydrogen-air-entrained flame. The limit of detection (2σ) was 0.03 μg g^?1 in the original meteorite and the r.s.d, was 3.9% for ten replicate analyses of the Toluca meteorite. The germanium content of this meteorite was 246 αg^?1, the same as that obtained by neutron activation analyses (NAA). Analyses of nine iron meteorites afforded values in agreement with those previously obtained by NAA.     

Gravimetric method for the determination of diclofenac in pharmaceutical preparations

A gravimetric method for the determination of diclofenac in pharmaceutical preparations was developed. Diclofenac is precipitated from aqueous solution with copper(II) acetate in pH 5.3 (acetic acid/acetate buffer). Sample aliquots had approximately the same quantity of the drug content in tablets (50 mg) or in ampules (75 mg). The observed standard deviation was about +/- 2 mg; therefore, the relative standard deviation (RSD) was approximately 4% for tablet and 3% for ampule preparations. The results were compared with those obtained with the liquid chromatography method recommended in the United States Pharmacopoeia using the statistical Student's t-test. Complete agreement was observed. It is possible to obtain more precise results using higher aliquots, for example 200 mg, in which case the RSD falls to 1%. This gravimetric method, contrary to what is expected for this kind of procedure, is relatively fast and simple to perform. The main advantage is the absolute character of the gravimetric analysis.     

Determination of clonazepam in pharmaceutical preparations using simple high-throughput flow injection system

This study was aimed at examining two flow injection-spectrophotometric systems (normal and reverse) for the determination of clonazepam (CLO) at the microgram level in pure and pharmaceutical dosage forms. The estimation of CLO has been developed by conjugating a normal (or reverse) flow injection analysis (nFIA or rFIA) and spectrophotometric detection with phloroglucinol as a coupling reagent. Beer’s law was obeyed over a range of 50–400 and 30–400 μg/mL. The limits of detection were 11 and 8 μg/mL and the sampling rates were 51 and 28 samples per hour for nFIA and rFIA respectively. Both systems were successfully applied for the determination of CLO in its commercially available dosage forms. A comparison between the proposed flow systems was also done. These simple and high throughput methods could be utilized for pharmaceutical analysis of CLO.     

A sensitive method for the detection and quantification of ginkgo flavonols from plasma

Extracts from Ginkgo biloba leaves (family Ginkgoaceae) have antioxidant and free radical scavenging effects, largely attributed to the flavonols, which are a major class of functional components in ginkgo extracts. In order to facilitate analysis of systemic exposure to ginkgo-derived products in animals and/or humans, we developed a liquid chromatography/tandem mass spectrometry (LC/MS/MS)-based method that is capable of routinely monitoring plasma levels of ginkgo flavonols. We used an initial acidic hydrolysis step to convert the plasma ginkgo flavonol conjugates into their aglycone forms [quercetin (QCT), kaempferol (KMF) and isorhamnetin (ISR)] prior to EtOAc-based extraction and subsequent LC/MS/MS-based analysis. Comparative studies showed that the use of a mobile phase containing an extremely low concentration of HCOOH (0.01 per thousand) dramatically improved the electrospray ionization efficiency of the analytes in the negative ion mode; the efficiencies were approximately 4-, approximately 8- and approximately 20-fold higher for QCT, KMF and ISR, respectively, versus the results obtained using an electrolyte-free mobile phase, or approximately 2-, approximately 3- and approximately 4-fold higher, respectively, versus the results obtained using a mobile phase containing the more commonly utilized concentration of HCOOH (1 per thousand). In addition, use of the low concentration of HCOOH also decreased undesired matrix effects. These favorable effects have been referred to as 'LC-electrolyte effects'. Due to structural differences in the B-ring substituent, different types of precursor-to-product ion pairs (m/z 301 --> 151 for QCT, 285 --> 187 for KMF, and 315 --> 300 for ISR) were used for the selected reaction monitoring of the analytes. In addition, the chromatographic conditions were optimized on the basis of an initial scouting of matrix effects on analyte ionization. Despite the absence of an internal standard, the validation results consistently demonstrated that our bioassay is valid, reproducible, and reliable. The newly developed assay provided lower limits of quantification of 1.3, 1.3 and 0.4 pg on-column for QCT, KMF and ISR, respectively, which is more sensitive than any previously reported method for determining ginkgo flavonols. Finally, the assay suitability was demonstrated in a pilot pharmacokinetic measurement of a pharmaceutical ginkgo product in a beagle dog. This newly developed method should prove useful for wide-scale monitoring of ginkgo flavonol plasma concentrations for both pharmaceutical investigations and clinical applications.