Emergency OSL dosimetry with commonplace materials

Several commonplace materials were studied as possible emergency optically stimulated luminescence (OSL) dosimeters. The materials included: paper currency (banknotes) and coins of different denomination and from different countries; plastic cards of different types (credit and debit cards, driver's license cards, membership cards, etc.), parts and details of clothing and shoes as well as samples of different fabrics.The samples displayed significant variability in their OSL properties. They differed in the intensity of the initial ‘native’ signal; the bleaching time of the OSL signal; the sensitivity to light of different wavelengths; the fading rate of OSL signals, etc. Procedures of OSL analysis were proposed to account for this variety.Values of the minimum measurable dose (MMD) were below 2 Gy for most tested samples if OSL measurements were conducted within one week of exposure and the samples were kept in dark since exposure (except samples of shoes that were kept under environmental light).The OSL signals in banknotes appear to originate from compounds containing aluminum, silicon, calcium and titanium – these elements were detected using X-ray microanalysis. For coins, the source of the OSL signals is speculated to be small particles of quartz, which were detected on the coins' surfaces. The X-ray microanalysis spectra from fabrics and shoes revealed sodium, aluminum, titanium, iron and nickel as elements that appeared to be responsible for the radiation sensitivity of those samples.It was concluded that, under certain constrained circumstances, paper and metallic money, personal plastic cards, clothing and shoes could be used as emergency OSL dosimeters in triage applications.     

Reproducibility of optically stimulated luminescence measurements from single grains of Al2O3:C and annealed quartz

We have measured some aspects concerning the performance of a new instrument for the measurement of optically stimulated luminescence (OSL) from single sand-sized grains. The instrument uses a solid-state laser to stimulate OSL from each grain individually. These grains are placed in a regular grid of nine-by-nine holes, which are drilled in the sample disc. We report on tests carried out to determine the precision with which the laser beam can be directed at individual grains in these holes. Single grains of aluminium oxide (Al₂O₃:C) (90–180 μm) and annealed quartz (90–120 μm) were used to test the reproducibility with which the OSL signal can be measured. These experiments suggest that the laser beam can be positioned to within 30 μm and that the reproducibility of OSL measurement is 3.5% on an average.     

Retrospective dosimetry using Japanese brick quartz: A way forward despite an unstable fast decaying OSL signal

Quartz extracted from heated bricks has been previously suggested for use in dose estimation in accident dosimetry, but this technique has never been applied before to Japanese quartz which often has unusual OSL characteristics. In this study the optically stimulated luminescence (OSL) characteristics of quartz extracted from a Japanese commercial red brick produced by Mishima – Renga – Seizoujyo Co. are studied. These companies are based in the Aichi Prefecture (capital Nagoya), which accounts for about half of the red brick production in Japan. A comparison of TL (thermoluminescence) and OSL signals has been carried out towards identification of common source traps. It is observed that OSL from Japanese brick quartz shows unusual luminescence characteristics; in particular, the initial fast decaying OSL signal contains a dominant (>90%) thermally unstable component related to the 85 °C TL peak, which necessitates a prior heat treatment. A single-aliquot regenerative-dose (SAR) protocol is developed and tested using thermal treatments intended to isolate a stable dosimetric signal. A minimum detection limit of ～65 mGy is then estimated using this protocol. Following irradiation using ⁶⁰Co and ¹³⁷Cs, dose–depth profiles were measured on two different commercial brick types (Mishima – Renga – Seizoujyo Co. and Hase – Renga Co.) with 5 Gy and 10 Gy surface doses. The profiles derived from the two sources were readily distinguishable. It is concluded that the OSL signals from the two types of Japanese brick quartz examined here can be used to derive precise estimates of accident dose, and, possibly to distinguish between sources of gamma radiation in a nuclear accident.To our knowledge, this is the first report on the existence of an unstable fast decaying OSL signal in quartz derived from bricks, and demonstrates a way forward with such samples in retrospective dosimetry.     

Investigating quartz optically stimulated luminescence dose–response curves at high doses

Despite the general expectation that optically stimulated luminescence (OSL) growth should be described by a simple saturating exponential function, an additional high dose component is often reported in the dose response of quartz. Although often reported as linear, it appears that this response is the early expression of a second saturating exponential. While some studies using equivalent doses that fall in this high dose region have produced ages that correlate well with independent dating, others report that it results in unreliable age determinations. Two fine grain sedimentary quartz samples that display such a response were used to investigate the origin of this additional high dose component: three experiments were conducted to examine their dose–response up to >1000 Gy. The high dose rates provided by laboratory irradiation were found not to induce a sensitivity change in the response to a subsequent test dose, with the latter not being significantly different from those generated following naturally acquired doses. The relative percentage contributions of the fast and medium OSL components remained fixed throughout the dose–response curve, suggesting that the electron traps that give rise to the initial OSL do not change with dose. An attempt was made to investigate a change in luminescence centre recombination probability by monitoring the depletion of the ‘325 °C’ thermoluminescence (TL) during the optical stimulation that would result in depletion of the OSL signal. The emissions measured through both the conventional ultraviolet (UV), and a longer wavelength violet/blue (VB) window, displayed similar relative growth with dose, although it was not possible to resolve the origin of the VB emissions. No evidence was found to indicate whether the additional component at high doses occurs naturally or is a product of laboratory treatment. However, it appears that these samples display an increased sensitivity of quartz OSL to high doses that is not recorded by the sensitivity to a subsequent test dose, and which results in a change in the sensitivity-corrected dose–response curve.     

Using optically stimulated electrons from quartz for the estimation of natural doses

A flow-through Geiger-Müller pancake electron detector attachment has been fitted to a standard Risø TL/OSL reader enabling optically stimulated electrons (OSE) to be measured simultaneously with optically stimulated luminescence (OSL). Using this detector, OSE and OSL measurements from natural quartz samples are studied to examine the possible use of OSE as a chronometer. First the relative variability in OSE and OSL growth curve shapes and the effect of preheat on these are presented, and from these curves, conclusions are drawn concerning the charge movement in natural quartz. Secondly, a dose recovery test shows that OSE can successfully recover a laboratory dose of 300 Gy given before any laboratory thermal treatment, for preheating temperatures between 160 and 260 °C. Furthermore, for the first time natural OSE decay curves are detected and these signals are used to estimate a burial dose using the single-aliquot regenerative-dose (SAR) procedure. Finally, a comparative study of the equivalent doses estimated using both OSE and OSL from 10 quartz samples are presented, and it is shown that OSE has a significant potential in retrospective dosimetry.     

Relative response of TL and component-resolved OSL to alpha and beta radiations in annealed sedimentary quartz

Knowledge of the relative luminescence response to alpha and beta radiation is very important in TL and OSL dating. In the present study the relative alpha to beta response is studied in a sedimentary quartz sample, previously fired at 900 °C for 1 h, in the dose region between 1 and 128 Gy, for both thermoluminescence (TL) and linearly modulated optically stimulated luminescence (LM – OSL). The LM – OSL measurements were performed at room temperature and at 125 °C. All OSL signals were deconvolved into their individual components. Comparison of OSL curves after alpha and beta irradiation strongly supports that quartz OSL components follow first order kinetics in both cases. In the case of TL, the relative alpha to beta response is found to be very different for each TL glow-peak, but it does not depend strongly on irradiation dose. In the case of LM – OSL measurements, it is found that the relative behaviour of the alpha to beta response is different for three distinct regions, namely the fast OSL component, the region of medium OSL component originating from the TL glow-peak at 110 °C when stimulation takes place at room temperature and finally the region of slow OSL component. Following stimulation at ambient temperature, the relative alpha to beta response of all components was not observed to depend significantly on dose, with the value of ratio being 0.03 and a tendency to decrease with increasing dose. However, in the case of measurements performed at 125 °C, the relative response of the fast components is much enhanced, and for the remaining components it increases with increasing dose. Special care must be taken to examine the relative alpha to beta response of the fast component at 125 °C which contrasts the relative response of the TL peak at ca. 325 °C. The implications for the dating of annealed quartz are also briefly discussed.     

Luminescence sensitivity changes in quartz as a result of annealing

Retrospective dosimetry using optically stimulated luminescence (OSL) on quartz extracted from (for example) bricks needs to account for strong OSL sensitivity changes that are known to occur depending on the previous thermal treatment of the sample. Non-heated quartz exhibits OSL orders of magnitude less per unit radiation than that for heated material. The reason these temperature-induced sensitivity changes occur in quartz is presently not well understood. This phenomenon is also seen in the related area of luminescence dating in which sedimentary quartz and quartz from heated archaeological samples show very different OSL sensitivities. In this paper we report on studies of the effects of high temperature annealing on the OSL and phototransferred TL (PTTL) signals from sedimentary and synthetic quartz. A dramatic enhancement of both OSL and PTTL sensitivity was found especially in the temperature range 500–800°C. Computer simulations of the possible effects are shown to produce data that agree in all essential details with the experimental observations. It is further demonstrated that the enhanced OSL sensitivity as a function of annealing temperature is not a pre-dose effect.     

Observations of thermal transfer OSL signals in glacigenic quartz

The conclusions of Rhodes and Pownall (Rhodes, E.J., Pownall, L., 1994. Zeroing of the OSL signal in quartz from young glaciofluvial sediments. Radiation Measurements 23, 329–333) were somewhat discouraging for the prospects of using quartz OSL for dating glacigenic sediments, while the more detailed study of Rhodes and Bailey (Rhodes, E.J., Bailey, R.M., 1997. The effect of thermal transfer on the zeroing of the luminescence of quartz from recent glaciofluvial sediments. Quaternary Science Reviews (Quaternary Geochronology) 16, 291–298) provided more encouragement. Specifically, the latter authors were able to account for the relatively high D_e values observed for recent glacigenic (dominantly glaciofluvial) sediments in terms of an anomalously high thermal transfer effect, rather than simply insufficient bleaching prior to deposition. In other locations, the OSL of quartz from glacigenic material appears to provide reliable age estimates, and does not suffer from these effects (Owen, L.A., Richards, B., Rhodes, E.J., Cunningham, W.D., Windley, B.F., Badamgarav, J., Dorjnamjaa, D., 1998. Relic permofrost structures in the Gobi of Mongolia: age and significance. Journal of Quaternary Science 13 (16), 539–548; Richards, B.W., Owen, L.A., Rhodes, E.J., 2000. Timing of Late Quaternary glaciations in the Himalayas of northern Pakistan. Journal of Quaternary Science 15, 283–297). In this paper, laboratory bleached samples from both the above studies are remeasured, using an experimental design to correct for OSL sensitivity changes, which has some similarities to the single aliquot regenerative dose (SAR) protocol of Murray and Wintle (Murray A.S., Wintle A.G., 2000. Luminescence dating of quartz using an improved single-aliquot regenerative-dose protocol. Radiation Measurements 32, 57–73). Clear evidence of thermal transfer OSL signals, generated during the preheating procedure, is presented. Further measurements, using the full SAR protocol, demonstrate that the source of this charge is related to natural dosing. For one sample, the apparent effect is subtracted effectively by the SAR protocol. Another sample studied in detail shows a striking relationship between the thermally transferred OSL signal and the total TL observed during the ramping of the preceding preheat treatment.     

The problem of dating quartz 2: Synchrotron generated X-ray excited optical luminescence (XEOL) from quartz

The luminescence emission of quartz is used in optically stimulated luminescence dating (OSL), however the precise origins of the emission are unclear. A suite of quartz samples were analysed using X-ray excited optical luminescence (XEOL). Radiation dose effects were observed whereby the UV emissions (3.8 and 3.4 eV) were depleted to the benefit of the red emission (1.9–2.0 eV). Samples were excited at ∼7 keV. Understanding why some quartz emit light more brightly than others will increase the efficiency and precision of OSL analyses.     

OSL and IRSL characteristics of quartz and feldspar from southern California,USA

Southern California comprises of a wide range of diverse landscapes and environments, from high mountains with glacial and periglacial sediments to deserts with large sand dunes, extensive alluvial fans and ephemeral playas. Highly active tectonic processes has exposed ancient (c. 2 Ga) plutonic and metamorphic basement from deep within the crust, while similar Palaeozoic, Mesozoic and Cenozoic rocks are also common. A rich array of volcanic lithologies extending into the late Quaternary complement many thick sedimentary sequences that formed in equally diverse ancient environments typical of an accreting active continental margin. In some locations, notably in the Coachella Valley close to Palm Springs and the Salton Sea, low OSL sensitivity and poor characteristics restrict the application of the quartz SAR protocol to date late Pleistocene and Holocene fluvial sediments. In other locations such as the Malibu coastline, high sensitivity of the quartz OSL signal is observed, despite local source rocks being dominated by volcanic lithologies. Problems of poor quartz characteristics, along with uncertainty in predicting quartz OSL behavior for future dating campaigns poses a significant problem for projects, in particular for neotectonic contexts. While K-feldspar has been used extensively to date eolian and fluvial sediments in southern California, little information regarding signal stability is available. We explore the characteristics of both quartz and feldspar sub-samples from eolian, fluvial, lacustrine environments, in order to help develop mineral selection criteria for optical dating applications and clarify these issues. The importance of radiation quenching in quartz grains recently eroded from bedrock and the role of fires in enhancing OSL sensitivity are considered. The relative bleachability of quartz and feldspar fractions, along with thermal stability considerations is discussed. A simple test for quartz OSL signal contamination based on thermal quenching and assistance, and the susceptibility of the OSL signal to IR bleaching is introduced.     

Experimental demonstration of the variable energy of stimulation optically stimulated luminescence (VES-OSL) method

A new method of OSL stimulation using the continuous increase of stimulation energy (VES-OSL) has been previously suggested. Earlier computer simulations showed that this type of stimulation results in a peak-shaped OSL curve that closely resembles the TL peak. VES-OSL measurements were performed using a stimulation source that was specially constructed for this purpose, and the equipment is described in detail. The first results of these measurements are presented for quartz samples and the behaviour of the VES-OSL curves obtained is consistent with earlier theoretical expectations.     

Investigating the thermally transferred optically stimulated luminescence source trap in fired geological quartz

The pre-dosed thermoluminescence (TL) emission of quartz has been found to be useful in retrospective dosimetry and archaeometry. Though the pre-dosed optically stimulated luminescence (OSL) and TL emissions have been reported to be similar, the former has been found to be un-reliable for the equivalent dose estimation. As this measurement protocol involves thermal heating at around 400 °C, the work reported in this paper investigated the influence of this heating on the OSL using fired specimens from various regions. The results suggested that the discrepancy in the behaviour of two emissions is caused by the presence of the thermally transferred optically stimulated luminescence (TT-OSL) induced by thermal-activation involved in the pre-dose treatment. This transferred signal was observed to be very significant in the case of samples containing a prominent higher-temperature TL peak at ∼375 °C. The characterization of this signal based on (i) the nature of the glow curves, (ii) thermal-annealing of the OSL trap, (iii) observation of the TT-OSL, (iv) bleaching of the source trap and (v) the correlation between TL and OSL seems to suggest that the trap corresponding to this TL peak is the source trap in the TT-OSL emission mechanism.     

Optically stimulated luminescence production in the single-aliquot regenerative dose protocol

When using a single-aliquot regenerative dose (SAR) protocol for luminescence dating of sedimentary quartz grains, the fundamental assumption is that the sensitivity of the optically stimulated luminescence (OSL) produced by the regenerative doses can be monitored by their following test dose OSL response. Using well-bleached coarse quartz grains, OSL production in a SAR protocol was studied in detail when dose response curves were constructed using both single and multiple aliquot regenerative dose procedures. During application of the SAR protocol, two preheats are applied, each ahead of an OSL measurement that is produced by the regenerative dose and test dose, respectively. It is shown that sensitivity changes caused by heating were well corrected for using the OSL response to the test dose. However, these preheats are shown to result in thermally stimulated OSL signals that contribute both to the OSL response from the regenerative doses used to construct the dose response curve and to the OSL response from the test dose used to monitor OSL sensitivity changes as the quartz grains are repeatedly measured. A simple test is proposed to identify the contribution of the latter signal.     

Study of the 110°C TL peak sensitivity in optical dating of quartz

As the 110°C TL emission in quartz uses the same luminescence centers as the OSL emission, the 110°C TL signal from a test dose may be used to monitor the OSL sensitivity change. It is thus important to study the relationship between the 110°C TL peak and the OSL sensitivity in studies related to optical dating from quartz. We have conducted a series of experiments using sedimentary quartz, where the annealing temperatures were varied between 260 and 1000°C before the measurement of OSL and 110°C TL sensitivities. Another series of experiments on two sedimentary quartz samples investigated the 110°C TL peak and OSL dose-dependent sensitivity change after different annealing temperatures. In these experiments, the 110°C TL and OSL signals from the test dose are shown to have similar sensitization characteristics: the 110°C TL sensitivity change is proportional to the OSL sensitivity change if the annealing temperature is lower than 500°C. It is concluded that the 110°C TL signal can be used to correct the OSL sensitivity change in the single-aliquot additive-dose protocol.     

Kinetics of red, blue and UV thermoluminescence and optically-stimulated luminescence from quartz

The duration over which charge is retained at trapping sites is of fundamental importance for trapped electron dating. Here, we report measurements of the kinetic parameters of the prominent thermoluminescence (TL) glow peaks of quartz, and of the optically-stimulated luminescence (OSL) signal from quartz utilised for optical dating. The similarity in trapping lifetimes of the 325°C TL peak and the dominant component of the OSL signal are taken as further support for the hypothesis of their common origin in the same trapped electron population.     

Estimating the parameters of traps in quartz by the variable energy of stimulation optically stimulated luminescence (VES-OSL) method

Optical-cross section that is a trap parameter estimated from the measurements of optically stimulated luminescence (OSL) is not a uniquely determined physical quantity. It depends not only on temperature and the energy of stimulation light but also, in the simplest case, on the optical depth of trap, the frequency of vibration mode and on the Huang-Rhys factor, i.e. the average number of phonons involved in the process of optical excitation of electrons from trap to conduction band. Conventional OSL measurement techniques do not enable to determine directly these parameters but they could be estimated by applying the variable energy of stimulation optically stimulated luminescence (VES-OSL) method. Recently it was put in to practice and the first VES-OSL curves were presented. In this study the outcomes of VES-OSL experiments are presented together with the first attempt of direct estimating the optical depth of traps active in OSL process in quartz.     

Improving the TT-OSL SAR protocol through source trap characterisation

Thermally-transferred optically stimulated luminescence (TT-OSL) extends the age range of OSL dating using quartz. A set of experiments have been undertaken to determine the kinetic parameters of the TT-OSL source traps, and this information has been used to propose an improved TT-OSL single aliquot regenerative (SAR) dose protocol. By combining together OSL and thermoluminescence (TL) measurements on fine-grained quartz, a correspondence between TL peaks and the TT-OSL signal is found. The thermal stability of the main TT-OSL trap was estimated by applying Hoogenstraaten’s method and allowing for thermal quenching; this predicts a lifetime of 4.5 Ma at 10 °C. A set of experiments were undertaken to refine the treatment needed at the end of each SAR cycle to erase the previously acquired TT-OSL signal. An improved TT-OSL SAR protocol using this treatment is proposed, and it is tested on quartz from a young Holocene sample. These tests yielded excellent recycling ratios and excellent dose recovery.     

Empirical insights into multi-grain averaging effects from ‘pseudo’ single-grain OSL measurements

In this study we assess the signatures of multi-grain averaging effects for a series of sedimentary samples taken from the archaeological site of Hotel California, Atapuerca, Spain. We focus on the special case of equivalent dose (D_e) measurements made on single-grain discs that contain more than one quartz grain in each of the individual grain-hole positions with the aims of (i) providing insight into the nature and extent of averaging effects in very small multi-grain aliquots of sedimentary quartz, and (ii) assessing the suitability of ‘pseudo’ single-grain D_e measurements for this particular dating application. Pseudo single-grain OSL measurements made on standard discs loaded with 90–100 μm grains (equivalent to ～30 grains per hole) yield significantly different D_e distribution characteristics and finite mixture model (FMM) burial dose estimates compared with single-grain OSL measurements. Grains with aberrant luminescence behaviours, which are routinely rejected during single-grain analysis, exert strong averaging effects on the pseudo single-grain and multi-grain aliquot D_e distributions. Grain-hole averaging effects arising from pseudo single-grain measurements also give rise to ‘phantom’ dose components and are apt to provide bias assessments of quartz signal characteristics and grain type classifications. Though this is a site-specific study, it serves as a cautionary note for interpretations of other pseudo single-grain OSL and D_e datasets – particularly those obtained from measurements of discs containing several tens of grains per hole and those derived from complex depositional environments. The use of custom single-grain discs drilled with smaller sized grain holes is recommended as a means of limiting grain-hole averaging effects when dealing with very fine (<180 μm) sediments.     

Thermal assistance in TA – OSL signals of feldspar and polymineral samples; comparison with the case of pure quartz

Thermally assisted optically stimulated luminescence (TA – OSL) is studied for the cases of polymineral, rich in K-feldspar sample as well as one pure sample of K-feldspar. For both cases, the shape of the TA – OSL signal indicates an initial, fast decaying part which is followed by a flat, very slowly decaying part with intensity much larger than the ordinary background noise signal. Thermal assistance characteristics indicate that for the case of pure K-feldspar, the signal originates from a unique very deep trap. The experimental features of the TA – OSL signal in the case of polymineral sample resemble much the corresponding TA – OSL features of pure quartz, in terms of both glow curve shape, especially at high stimulation temperatures, as well as signal intensity and its dependence on the stimulation temperature. Nevertheless, TA – OSL stimulation at low, ambient temperatures provide strong hints towards the contribution of K – feldspars to this signal. Proper selection of the stimulation temperature could possibly discriminate the TA – OSL signal originating from quartz and feldspars.     

Quartz fast component opticallystimulated luminescence: Towards routine extraction for dating applications

Using an uncontaminated fast component is a key for improving the reliability of quartz OSL dating for many deposits. So far no approach to extract the fast component of quartz OSL has routinely been adopted for dating practice. Key challenges for extracting fast components are (1) the difficulty of finding a unique solution in curve-fitting deconvolution of OSL decay curves and (2) the relatively poor dating precision when using experimental fast component extraction. Here, a simple mathematic solution for fast component extraction is presented that is not relying on curve-fitting deconvolution and can easily be adopted into routine dating practices. By using specifically selected data points from smoothed OSL decay curves, the precision of equivalent doses calculated using the extracted fast component can be improved over equivalent doses calculated using bulk OSL. The fast component extraction is tested on a group of age-constrained samples containing both insufficiently bleached and sufficiently bleached deposits. Fast component OSL ages are as accurate as bulk OSL ages for the sufficiently bleached deposits, but more accurate for samples where bulk OSL is affected by insufficient bleaching. We also demonstrate how using a curve smoothing procedure can improve dating precision in case of both sufficiently and insufficiently bleached deposits.