Synthesis of <Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone copolymers with 2-aminoethyl methacrylate as drug carriers

Radical copolymerization of N-vinylpyrrolidone and 2-aminoethyl methacrylate hydrochloride has been studied. Molecular and hydrodynamic characteristics of the resulting copolymers have been determined, and their structure has been confirmed. Conditions favoring conversion of these copolymers into copolymers of N-vinylpyrrolidone with 2-aminoethyl methacrylate of different composition have been elucidated. The suitability of the prepared copolymers as polymeric carriers of monofluoroquinolone ofloxacin has been demonstrated.     

Synthesis and sorption activity of copolymers of vinyltriazole with diethylene glycol divinyl ether

New cross-linked insoluble polyfunctional copolymers with triazole fragments and vinyloxy groups in the side chain were synthesized by radical copolymerization of 1-vinyl-1,2,4-triazole with diethylene glycol divinyl ether. The dependence of the sorption activity with respect to the gold ions in acidic solutions on their nature and concentration was studied. The copolymers obtained were found to possess high sorption activity; they efficiently extracted gold ions from solutions of complex composition.     

H-bonding-directed self-assembly of synthetic copolymers containing nucleobases: organization and colloidal fusion in a noncompetitive solvent

The self-organization of random copolymers composed of a nucleobase monomer (either 1-(4-vinylbenzyl)thymine or 9-(4-vinylbenzyl)adenine) and dodecyl methacrylate (DMA) was studied in dilute chloroform solutions. The balance between the molar fractions of the nucleobase monomer (leading to intermolecular H-bonding) and DMA (soluble moiety in chloroform) in the polymer chains was found to be the parameter that principally influences the self-organization. DMA-rich copolymers are molecularly soluble in chloroform, whereas nucleobase-rich copolymers are insoluble in this solvent. Copolymers possessing an equimolar comonomer composition self-assemble into micrometer-sized particles physically cross-linked by intermolecular H-bonds (either thymine-thymine or adenine-adenine interactions, depending on the studied copolymer). Nevertheless, when mixed together, thymine- and adenine-based colloids fuse into thermodynamically stable microspheres cross linked by adenine-thymine interactions.     

Water-Resistant Films and Coatings Based on Cross-Linking Styrene-Acrylate Latex Copolymers

Water-resistant films and coatings were prepared from latexes of copolymers of styrene, n-butyl acrylate, 2-hydroxyethyl methacrylate, glycidyl methacrylate, and methacrylic acid. The degree of cross-linking of the copolymers in the course of film formation and the water resistance of the films and coatings, associated with this parameter and evaluated by the water absorption and mechanical properties of wet films, were studied in relation to the gross composition of the latex copolymer, conditions of its synthesis, distribution of functional groups responsible for cross-linking in a latex particle, and temperature of film formation.     

Synthesis and characterization of random copolymers of (2,2-dimethyl-1,3-dioxolan-4-yl)methyl methacrylate and 2,3-dihydroxypropyl methacrylate

Poly[(2,2-dimethyl-1,3-dioxolan-4-yl)methyl methacrylate)] [poly(solketal methacrylate) (PSMA)] was synthesized by free radical polymerization. By partial hydrolysis of the acetal group, random copolymers of SMA with 2,3-dihydroxypropyl methacrylate (DHPMA) were synthesized whereas complete cleavage lead to poly(2,3-dihydroxypropyl methacrylate) (PDHPMA). The copolymer composition was determined by ¹H NMR spectroscopy. FTIR spectroscopy indicates the synthesis of random copolymers with different degrees of hydrogen bonding as measured by a shift of the OH vibration bands. The glass transition temperature of the random copolymers increases linearly with increasing DHPMA content, resulting in a positive deviation from the Fox equation. The thermal degradation of both homopolymers and their random copolymers has been studied. Finally, the solution behaviour of the copolymers and PDHPMA in water studied by dynamic light scattering showed a strong tendency of the polymer chains to form clusters in the size range of 15-62 nm. The size and the kind of associating interactions within the clusters strongly depend on the copolymer composition.     

Copolymerisation of maleic anhydride with electron-acceptor monomers

Copolymerisation of maleic anhydride with tert.-butyl methacrylate and trimethylsilyl methacrylate was studied. Both monomers form random copolymers with maleic anhydride and in both cases the acceptor monomer is incorporated preferentially into the copolymer. Maleic anhydride which does not homopolymerise has reactivity ratios of approximately zero. The esters have reactivity ratios of 12.8 for trimethylsilyl methacrylate and 2.95 for tert.-butyl methacrylate. Thermal behavior and molar masses were investigated as a function of composition. Conditions for hydrolysis of the trimethylsilyl ester groups to give free acid groups have been established.     

Characterization and degradation of the poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymer

Poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymers (PSXE-g-PMMA) were prepared by condensation reaction of poly(methylphenylsiloxane)-containing epoxy resin (PSXE) with carboxyl-terminated poly(methyl methacrylate) (PMMA), and they were characterized by gel permeation chromatography (GPC), infrared (IR), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The microstructure of the PSXE-g-PMMA graft copolymer was investigated by proton spin–spin relaxation T₂ measurements. The thermal stability and apparent activation energy for thermal degradation of these copolymers were studied by thermogravimetry and compared with unmodified PMMA. The incorporation of poly(methylphenylsiloxane) segments in graft copolymers improved thermal stability of PMMA and enhanced the activation energy for thermal degradation of PMMA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2521–2530, 1998     

Water sorption by poly(tetrahydrofurfuryl methacrylate‐co‐2‐hydroxyethyl methacrylate). I. A mass‐uptake study

Cylindrical samples (≈5 mm × 20 mm) of poly(2‐hydroxyethyl methacrylate) and copolymers of 2‐hydroxyethyl methacrylate and furfuryl methacrylate were prepared, and the sorption of water into these cylinders was studied by the mass‐uptake method and by the measurement of the volume change at equilibrium. The equilibrium water content and volume change for the cylinders both varied systematically with the copolymer composition. The diffusion of water into the cylinders followed Fickian behavior, with the diffusion coefficients, dependent on the copolymer composition, varying from 2.00 × 10⁻¹¹ m²s⁻¹ for poly(2‐hydroxyethyl methacrylate) to 5.00 × 10⁻¹² m²s⁻¹ for poly(2‐hydroxyethyl methacrylate‐co‐tetrahydrofurfuryl methacrylate) with a 1 : 4 composition. The polymers that were rich in 2‐hydroxyethyl methacrylate were characterized by a water‐sorption overshoot, which was attributed to a slow reorientation of the polymer chains in the swollen rubbery regions formed after water sorption. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1939–1946, 2000     

Thermoresponsive terpolymers based on methacrylate monomers: Effect of architecture and composition

A series of amphiphilic thermoresponsive copolymers was synthesized by group transfer polymerization. Seven copolymers were prepared based on the nonionic hydrophobic n‐butyl methacrylate (BuMA), the ionizable hydrophilic and thermoresponsive 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and the nonionic hydrophilic poly(ethylene glycol)methyl methacrylate (PEGMA). In particular, one diblock copolymer and six tricomponent copolymers of different architectures and compositions, one random and five triblock copolymers, were synthesized. The polymers and their precursors were characterized in terms of their molecular weight and composition using gel permeation chromatography and proton nuclear magnetic resonance spectroscopy, respectively. Aqueous solutions of the polymers were studied by turbidimetry, hydrogen ion titration, and light scattering to determine their cloud points, pK_as, and hydrodynamic diameters and investigate the effect of the polymers' composition and architecture. The thermoresponsive behavior of the copolymers was also studied. By increasing the temperature, all polymer solutions became more viscous, but only one polymer, the one with the highest content of the hydrophobic BuMA, formed a stable physical gel. Interestingly, the thermoresponsive behavior of these triblock copolymers was affected not only by the terpolymers' composition but also by the terpolymers' architecture. These findings can facilitate the design and engineering of injectable copolymers for tissue engineering that could enable the in situ formation of physical gels at body temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 775–783, 2010     

Properties of well‐defined alternating and random copolymers of methacrylates and styrene prepared by controlled/living radical polymerization

The physical properties of well‐defined alternating copolymers poly(methyl methacrylate‐alt‐styrene) and poly(n‐butyl methacrylate‐alt‐styrene), prepared by reversible addition–fragmentation chain transfer polymerization in the presence of Lewis acids, were investigated with differential scanning calorimetry, wide‐angle X‐ray scattering, and dynamic mechanical measurements. The properties were compared with those of random copolymers of the same overall composition and the corresponding homopolymers. Wide‐angle X‐ray scattering data showed that the alternating copolymers possessed a more regular comonomer sequence than the random copolymers. The thermomechanical properties of alternating copolymers and random copolymers were quite similar and typical for amorphous polymers, but in one of the cases studied the glass‐transition temperature for alternating copolymer was remarkably higher than for the random copolymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3440–3446, 2005     

Synthesis and characterization of poly(vinyl alcohol)‐graft‐[poly(D,L‐lactide)/poly(D,L‐lactide‐co‐glycolide)] hydrogels

Poly(D ,L ‐lactide) and poly(D ,L ‐lactide‐co‐glycolide) with various composition and with one methacrylate and one carboxylate end group were synthesized and grafted onto poly(vinyl alcohol) (PVA) via the carboxylate group. The graft copolymers were crosslinked via the methacrylate groups using a free radical initiator. The polymer networks were characterized by means of NMR and studied qualitatively by means of IR spectroscopy. The influence of the glycolide content in the polyester grafts and of the number of ester units in the grafts on thermal properties and swellability were studied as well. The high swellability in water is characteristic of all hydrogels. Differential scanning calorimetry (DSC) showed a single glass transition temperature that occurs in the range between 51 and 69 °C. Thermogravimetric analysis (TGA) of the networks showed the main loss in weight in the temperature range between 290 and 370 °C. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4536–4544, 2007     

Synthesis and Study of Polymeric Ultraviolet Absorbers. I

Polymeric ultraviolet absorbers have been synthesized by free-radical solution copolymerization in cyclohexanone at 70°C of methyl methacrylate and 2-hydroxy-4-acryloyloxybenzophenone at low (below 10%) conversion of monomers. The composition of the copolymers was determined by UV, IR, and NMR. The reactivity ratios were determined and the effect of copolymer composition on viscosity was studied. The copolymers were also studied by TGA and DSC. The latter showed the effect of copolymer composition on the glass-transition temperature.     

Synthesis and Properties of Soluble Copolymers of <Emphasis Type="Italic">N</Emphasis>-Vinyl-2-pyrrolidone with 2-Hydroxyethyl Methacrylate

Features of radical copolymerization of N-vinyl-2-pyrrolidone with 2-hydroxyethyl methacrylate in the presence of azobis(isobutyronitrile) were studied. The copolymerization constants of these monomers were calculated. The structure of the resulting copolymer was confirmed. The composition, microstructure, and molecular-weight parameters of the copolymers were determined.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 4, 2005, pp. 642–646.Original Russian Text Copyright © 2005 by Solovskii, Tarabukina, Shpyrkov, Denisov, Vlasova, Korchagin.     

Photochromic copolymers containing 3-indolylfulgides/indolylfulgimides: Synthesis and photochemical properties in toluene and as films

Photochromic indolylfulgimides covalently attached to polymers have beneficial properties for optical switching. A 3-indolylfulgide and two 3-indolylfulgimides with one or two polymerizable styrene groups attached on the nitrogen atom(s) were synthesized. Copolymerization with methyl methacrylate (MMA) provided linear copolymers (one styrene group) or a cross-linked copolymer (two styrene groups). The properties of the monomers and copolymers in toluene or as thin films were characterized. The new copolymers were photochromic (reversible Z-to-C isomerization), absorbed visible light, and revealed good thermal and photochemical stability. At room temperature, all copolymer films showed no loss of absorbance after 5 weeks. At 80 °C in either toluene or as films, the Z-forms copolymers were less stable than the C-form copolymers, which showed little or no degradation after 400 h. The degradation rate due to repeated ring-closing – ring opening cycles was less than 3% per 100 cycles. The cross-linked copolymer showed photochemical stability comparable to monomeric fulgides in toluene, <1% per 100 cycles. In general, the properties of the linear and cross-linked copolymers were similar to the corresponding monomers in toluene. In films, the conformations of the Z-form were restricted due to the matrix indicating that the preparation of films from the C-form is advantageous.     

Microstructural Characterization of Diblock Copolymers Formed by Styrene and Different Methacrylic Units

FT-IR, DSC, and NMR techniques allowed the structural characterization of four copolymers formed by styrene and methacrylic units (methacrylic acid (MAA), dimethylamine ethyl methacrylate (DMAEMA), sodium methacrylate (MANa), and 1-hydroxyethyl methacrylate (HEMA). The copolymer composition was studied by Fourier transform-infrared spectroscopy (FT-IR) and nuclear magnetic resonance (NMR) spectroscopy. The thermal behavior of the block copolymers was analyzed by differential scanning calorimetry (DSC). Three of the four copolymers showed two transitions caused by changes in the polymer heat capacity (ΔCp) of each block. Diffusion-ordered spectroscopy (DOSY) experiments were used to distinguish copolymer from homopolymer mixtures. Finally, the triad-level stereosequences of styrene-methacrylic copolymers were obtained using ¹³C NMR. The results indicate that by increasing the alkyl-substituent length in the methacrylic block, the probability of syndiotactic polymerization increases.     

Copolymerization of 1-Vinyl-1,2,4-triazole with 2-Hydroxyethyl Methacrylate

Radical copolymerization of 1-vinyl-1,2,4-triazole with 2-hydroxyethyl methacrylate in dimethylformamide and ethanol, initiated with azobis(isobutyronitrile), was studied. The copolymerization constants of this pair of monomers at low conversions and the microstructure parameters were determined. New highly hydrophilic thinly cross-linked copolymers were prepared from these monomers in the presence of crosslinking agents.     

Cationic methacrylate copolymers containing primary and tertiary amino side groups: Controlled synthesis via RAFT polymerization,DNA condensation,and in vitro gene transfection

A versatile family of cationic methacrylate copolymers containing varying amounts of primary and tertiary amino side groups were synthesized and investigated for in vitro gene transfection. Two different types of methacrylate copolymers, poly(2‐(dimethylamino)ethyl methacrylate)/aminoethyl methacrylate [P(DMAEMA/AEMA)] and poly(2‐(dimethylamino)ethyl methacrylate)/aminohexyl methacrylate [P(DMAEMA/AHMA)], were obtained by reversible addition‐fragmentation chain transfer (RAFT) copolymerization of dimethylaminoethyl methacrylate (DMAEMA) with N‐(tert‐butoxycarbonyl)aminoethyl methacrylate (Boc‐AEMA) or N‐(tert‐butoxycarbonyl)aminohexyl methacrylate (Boc‐AHMA) followed by acid deprotection. Gel permeation chromatography (GPC) measurements revealed that Boc‐protected methacrylate copolymers had M_n in the range of 16.1–23.0 kDa and low polydispersities of 1.12–1.26. The copolymer compositions were well controlled by monomer feed ratios. Dynamic light scattering and agarose gel electrophoresis measurements demonstrated that these PDMAEMA copolymers had better DNA condensation than PDMAEMA homopolymer. The polyplexes of these copolymers revealed low cytotoxicity at an N/P ratio of 3/1. The in vitro transfection in COS‐7 cells in serum free medium demonstrated significantly enhanced (up to 24‐fold) transfection efficiencies of PDMAEMA copolymer polyplexes as compared with PDMAEMA control. In the presence of 10% serum, P(DMAEMA/AEMA) and P(DMAEMA/AHMA) displayed a high transfection activity comparable with or better than 25 kDa PEI. These results suggest that cationic methacrylate copolymers are highly promising for development of safe and efficient nonviral gene transfer agents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2869–2877, 2010     

Synthesis and characterization of polycholesteryl methacrylate–polyhydroxyethyl methyacrylate block copolymers

We report the synthesis and characterization of a series of novel diblock copolymers, poly(cholesteryl methacrylate‐b‐2‐hydroxyethyl methacrylate) (PCMA‐b‐PHEMA). Monomers, cholesteryl methacrylate (CMA) and 2‐(trimethylsiloxy)ethyl methacrylate (HEMA‐TMS), were prepared from methyacryloyl chloride and 2‐hydroxyethyl methacrylate, respectively. Homopolymers of CMA, PCMA, with well‐defined molecular weights and polydispersity indices (PDI), were prepared by reversible addition fragmentation and chain transfer (RAFT) method. Precursor diblock copolymers, PCMA‐b‐P(HEMA‐TMS), were synthesized using PCMA as macromolecular chain transfer agent and monomer, HEMA‐TMS. Product diblock copolymers, PCMA‐b‐PHEMA, were prepared by deprotecting trimethylsilyl units in the precursor diblock copolymers using acid catalysts. Detailed molecular characterization of the precursor diblock copolymers, PCMA‐b‐P(HEMA‐TMS), and the product diblock copolymers, PCMA‐b‐PHEMA, confirmed the composition and structure of these polymers. This versatile synthetic strategy can be used to prepare new amphiphilic block copolymers with cholesterol in one block and hydrogen‐bonding moieties in the second block. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6801–6809, 2008     

Separation of copolymers using high-performance liquid chromatography with polymeric stationary phase and liquefied carbon dioxide as adsorption promoting solvent

Chromatographic separation of copolymers depending on the chemical composition was studied by a solvent gradient method using liquefied carbon dioxide (CO2) as an adsorption promoting solvent. As the high polar stationary phase, non-bonded silica gel, crosslinked acrylamide (AA) gel and crosslinked acrylonitrile (AN) gel were utilized. All columns showed the typical normal phase type of adsorption. Polymeric stationary phases showed the higher sample recovery for styrene-methyl methacrylate (St-MMAs) copolymers, indicating suitability for quantitative analyses. The separations of butyl methacrylate (BMA)-methyl methacrylate, and 2,2,3,3,4,4,4-heptafluorobutyl methacrylate (FBMA)-methy methacrylate copolymers were also carried out, and the latter copolymers were separated based on the CO2-philicity with acrylonitrile column.     

Block copolymers derived from azobiscyanopentanoic acid. X. Synthesis of silicone–vinyl block copolymers via polysiloxane(azobiscyanopentanamide)s

The synthesis of silicone–vinyl block copolymers has been studied by the use of poly(azo-containing siloxaneamide)s (abbreviated as PASAs), i.e., polysiloxane (azobiscyanopentanamide)s as macroazoinitiators. PASAs with number-average molecular weight of 12000–31000 and with siloxane chain lengths of 250–9800 were prepared by the condensation of azobiscyanopentanoyl chloride and α,ω-bis(3-aminopropyldimethyl)polysiloxanes in equimolar feeds. Several kinds of silicone–vinyl block copolymers were synthesized by radical polymerization of vinyl monomers such as methyl methacrylate, styrene, and vinyl acetate, in the presence of PASA in homogeneous media. The block copolymers with siloxane contents up to 30 mol % were then characterized on the basis of infrared absorption, proton NMR spectra, and gel permeation chromatography.