Eu-Mn energy transfer in white-light-emitting T-phase (Ba,Ca)2SiO4:Eu, Mn phosphor

White-light-emitting T-phase Eu²⁺/Mn²⁺-codoped (Ba, Ca)₂SiO₄ phosphors are achieved in terms of the energy transfer between Eu²⁺ and Mn²⁺ ions. All spectra consist of the relatively broad green and the red emission bands, which thus result in a warm-white color with a color temperature of ∼4000 K. With increasing Eu²⁺ ions at fixed Mn²⁺ concentrations, a strong correlation between the luminescence and the electron paramagnetic resonance spectra is observed. This demonstrates that Eu²⁺ doping causes a perturbation of Mn²⁺ sites and the violation of their selection rules that enhances Mn²⁺-related emissions.     

近紫外宽带激发LED用红色荧光粉(Gd_(1-x)Eu_x)6(Te_(1-y)Mo_y)O_(12)的制备与性能

利用高温固相法制备了一种新型红色荧光粉(Gd_(1-x)Eu_x)_6(Te_(1-y)Mo_y)O_(12),研究了Eu~(3+)单掺和Eu~(3+),Mo~(6+)共掺Gd_6TeO_(12)荧光粉的结构、形貌和荧光性能.实验结果表明,所合成的粉体为纯相.在393 nm近紫外光激发下,(Gd_(1-x)Eu_x)_6(Te_(1-y)Mo_y)O_(12)荧光粉发出特征红光,位于632 nm处的发射主峰属于Eu~(3+)的~5D_0→~7F_2跃迁.当Eu~(3+)掺杂浓度超过20%(物质的量分数)时发光出现浓度淬灭,经证实这是由电偶极-电偶极相互作用造成的.随着工作温度升高,荧光粉发光强度减小,计算得到Eu~(3+)热淬灭过程中的激活能为0.1796 eV.当(Gd_(0.8)Eu_(0.2))_6TeO_(12)中共掺Mo~(6+_(取代Te~(6+)),该荧光粉发射光谱的峰位、强度变化不大,但是Mo~(6+)-O~(2-)电荷迁移态显著增大了近紫外波段的激发带宽度,可以有效提高激发效率.具有近紫外宽带激发特征的(Gd_(0.8)Eu_(0.2))_6(Te_(0.6)Mo_(0.4))O_(12)是一种潜在的白光LED用荧光粉材料.     

Luminescent properties of a novel red-emitting phosphor: Eu-activated Ca3Sr3(VO4)4

A new luminescent material, Eu³⁺ activated Ca₃Sr₃(VO₄)₄, was investigated. This compound shows a strong red emission centered at 618 nm under near-UV light with two distinct absorption bands; charge transfer state of VO₄³⁻ and f-f transitions of europium ions. As the europium concentration is increased, an additional red-emitting phosphor, EuVO₄, which is known to be a prominent luminescent material in the near-UV region can be traced. The UV excited luminescent properties of this material may find application in the production of red phosphors for white light-emitting diodes.     

(Lu,Y)2SiO5∶Ce3+与SrSO4∶Dy3+材料低温热释光及其测试仪器的研究

为了分析材料在低温下的陷阱能级,获得更多有关缺陷结构的信息,研制了一套由STM32微控制器为核心的低温热释光发光谱测量系统。设计了低温样品室,采用液氮冷却样品;STM32通过控制加热电流,实现样品以恒定速率升温,从而获得低温热释光发光曲线或三维热释光谱。温度测量范围为85~400 K,升温速率范围为0.1~10 K/s。设计了由STM32控制X射线及紫外光源的驱动电路,用于样品的激发。采用高灵敏度CCD实现对三维热释光谱的测量,采用单光子计数器获取二维热释光发光曲线。利用该系统测试了（Lu,Y）₂SiO₅:Ce³⁺（LYSO:Ce³⁺）单晶闪烁体与SrSO₄:Dy³⁺粉末样品的热释光谱及辐射发光光谱。观察到LYSO:Ce³⁺在108,200,380 K左右的热释光峰,发光波长位于390~450 nm之间,是明显的宽带峰。在低温下由于基质的自陷激子（STE）发射所形成的发射峰在166 K时发生猝灭。在309 K时,Ce³⁺发射峰展宽为单一发射峰;SrSO₄:Dy³⁺发光峰温度为178,385 K,发光波长由Dy³⁺离子的能级跃迁决定,在480,575,660,750 nm处呈现窄带发光峰。结果表明,系统人机交互界面友好,实验数据可靠,智能化程度高,操作简单。     

A novel yellow emitting phosphor Dy3+, Bi3+ co-doped YVO4 potentially for white light emitting diodes

Novel Y1 x yVO4:xDy3+,yBi3+(0.01 ≤ x ≤ 0.05,0 ≤ y ≤ 0.20) phosphors for light emitting diode(LED) were successfully synthesised by solid-state reaction.The calculation results of electronic structure show that YVO4 has a direct band gap with 3 eV at G.The top of the valence band is dominated by O 2p state and the bottom of the conduction band is mainly composed of O 2p and V 3d states.An efficient yellow emission under near-ultraviolet(365 nm) excitation is observed.Compared with the pure YVO4:Dy3+ samples,the Dy3+,Bi3+ co-doped samples show a more intensive emission peak(at 574 nm) and a new broad emission band(450-770 nm),due to the 4F9/2 6H13/2 transition of Dy3+ and the emission of the VO3 4 Bi3+ complex respectively.The optimum chromaticity index of Y1 x yVO4:xDy3+,yBi3+(0.01 ≤ x ≤ 0.05,0 ≤ y ≤ 0.20) is(0.447,0.497),which indicates that YVO4:Dy3+,Bi3+ has higher colour saturation than the commercial phosphor YAG:Ce3+.The effects of concentration of Dy3+,Bi3+,electric states and the photoluminescence properties are discussed in details.     

红色荧光粉Na8.33 La1.67(SiO4)6 O2:Eu3+的制备及发光特性

采用高温固相法制备了Na_(8. 33)La_(1. 67)(SiO_4)_6O_2∶Eu~(3+)红色发光材料,利用X射线衍射仪测定其晶体结构,利用Hitachi F4600表征其发光光谱。在紫外光激发下,样品Na_(8. 33)La_(1. 67)(SiO_4)_6O_2∶Eu~(3+)呈多峰发射,分别对应于Eu~(3+)的~5D_0-~7F_j(j=0,1,2,3,4)能级跃迁,主峰是位于615 nm的~5D_0-~7F_2跃迁发射。研究了Eu~(3+)掺杂浓度对材料发光性质的影响,改变Eu~(3+)掺杂浓度,样品的发射强度随之改变,Na_(8. 33)La_(1. 67)(SiO_4)_6O_2∶Eu~(3+)材料的Eu~(3+)浓度为15%时,发光强度最大。讨论了浓度猝灭的机理,理论计算表明引起Eu~(3+)离子能量弥散的主要原因是离子间交换相互作用。     

Ba9Y2(SiO4)6: Ce3+,Mn2+荧光粉的发光特性及能量传递

利用高温固相法制备了Ba₉Y₂(SiO₄)₆:Ce³⁺,Mn²⁺(BYS:Ce³⁺,Mn²⁺)荧光粉,并通过X射线衍射(XRD)谱、激发和发射光谱及荧光寿命的测试对材料的结构、发光特性和能量传递进行了研究。在327 nm激发下,BYS:Ce³⁺,Mn²⁺发射光谱中包含2个发射峰,分别为位于407 nm的Ce³⁺的蓝紫光发射和位于597 nm的Mn²⁺的红光发射。在该体系中,发现了Ce³⁺向Mn²⁺的有效能量传递,使得Mn²⁺在597 nm处的红光发射显著提高,当x(Mn²⁺)=0.25时,BYS:Ce³⁺,xMn²⁺的能量传递效率可达39%。实验表明,该荧光粉可为紫外基白光LED提供良好的红光光源。     

Correlated ESR, PL and TL studies on Sr5(PO4)3Cl:Eu thermoluminescence dosimetry phosphor

Electron spin resonance (ESR), thermoluminescence and photoluminescence studies in Eu²⁺ activated Sr₅(PO₄)₃Cl phosphor are reported in this paper. The Sr₅(PO₄)₃Cl:Eu²⁺ phosphor is twice as sensitive as the conventional CaSO₄:Dy phosphor used in thermoluminescence dosimetry of ionizing radiations. It has a linear response, simple glow curve, emission peaking at 456 nm. The defect centers formed in the Sr₅(PO₄)₃Cl:Eu²⁺phosphor are studied by using the technique of ESR. A dominant TL glow peak at 430 K with a smaller shoulder at 410 K is observed in the phosphor. ESR studies indicate the presence at three centers at room temperature. Step annealing measurements show a connection between one of the centers and the dominant glow peak at 430 K. The 430 K TL peak is well correlated with center I, which is tentatively identified as (PO₄)²⁻ radical.     

Synthesis and luminescence properties of red-emitting phosphors NaY0.87Eu0.13(WO4)1.2(MoO4)0.8

A series of NaY_1−yEu_y(WO₄)_2−x(MoO₄)_x (x=0−2 and y=0.06−0.15) phosphors have been prepared by a combustion route. X-ray powder diffraction, photoluminescence excitation and emission spectra were used to characterize the resulting samples. The excitation spectra of these phosphors show the strongest absorption at about 396 nm, which matches well with the commercially available n-UV-emitting GaN-based LED chip. Their emission spectra show an intense red emission at 616 nm due to the ⁵D₀→⁷F₂ electric dipole transition of Eu³⁺. As the Mo content increases, the intensity of the ⁵D₀→⁷F₂ emission of Eu³⁺ activated at wavelength of 396 nm increases and reaches a maximum when the relative ratio of Mo/W is 2:3. The intense red-emission of the tungstomolybdate phosphors at near-UV excitation suggests that the material is a potential candidate for white light emitting diode (WLEDs).     

Dy3+、Tm3+共掺杂Ca2MgSi2O7的发光特性

采用高温固相法合成了系列Ca₂MgSi₂O₇：Dy³⁺,Tm³⁺发光材料。对样品进行了XRD结构表征,测量了激发光谱、发射光谱、色温和荧光寿命。研究结果表明,Ca₂MgSi₂O₇：Tm³⁺在355 nm激发下显示出蓝色发光,在CIE1931中的色坐标为x=0.165 9,y=0.082 2,色纯度为89%。通过Dy³⁺和Tm³⁺的叠加激发谱带激发,即在349,353,365 nm激发下,Ca₂MgSi₂O₇：Dy³⁺,Tm³⁺显示出青白、冷白和暖白光,相关色温值分别为5 193,9 672,4 685 K。300~500 nm区域间可以有效地激发Ca₂MgSi₂O₇：Dy³⁺,Tm³⁺,并在400~600 nm之间产生蓝光和黄光复合产生的白光,表明该体系可用作白光LED的发光材料。     

Lattice site dependent cathodoluminescence behavior and surface chemical changes in a Sr5(PO4)3F host

Eu activated Sr₅(PO₄)₃F phosphor powders have been subjected to the electron bombardment at 2 keV (10 μA) at an oxygen pressure of 1×10⁻⁶ Torr. The synthesized Sr₅(PO₄)₃F phosphor was identical to the hexagonal apatite structure, with the Sr present at two different sites C_s (S1) and C₃ (S2) in the Sr₅(PO₄)₃F host, as inferred from the crystallographic study. Cathodoluminescence (CL) and Auger electron spectroscopy of the phosphor excited by the same electron beam were used to monitor changes in the surface state during prolonged electron bombardment. A direct correlation between the surface reactions and the degradation of the CL brightness was observed. Both C and F were depleted from the surface during electron bombardment. The postulated mechanism for the electron stimulated chemical reactions on the phosphor surface is electron beam dissociation of molecular species to atomic species, which subsequently react with C to form volatile compounds CO₂, CH₄, etc. and with Sr₅(PO₄)₃F to form a non luminescence layer of metal oxides of Sr and P.     

Photoluminescence study in Ce activated M6B5AlO15 (M = Sr,Ca, Ba) and mixed host aluminoborate phosphors

In this paper we report the modified solid state synthesis of Ce³⁺ activated Sr₆B₅AlO₁₅, Ca₆B₅AlO₁₅ Ba₆B₅AlO₁₅ and mixed host aluminoborate phosphors. The prepared phosphors were characterized by photoluminescence technique. The PL excitation spectra showed the excitation peaks ranging from 300 to 400 nm and emission spectra are observed in UV-blue region of spectrum and it varied for different hosts. This kind of emission is due to 4f⁶5d → 4f⁷ transition of Ce³⁺ ion. Further PLE and PL emission spectra for various compositions Ca₅Sr₁B₅AlO₁₅, Ca₄Sr₂B₅AlO₁₅, Ca₃Sr₃B₅AlO₁₅, Ca₂Sr₄B₅AlO₁₅, CaSr₅B₅AlO₁₅ are also taken which shows Ce³⁺ emission at 428 nm, 425 nm, 432 nm, 427 nm, 438 nm respectively. The calculated ²F_J (J = 7/2, 5/2) energy gap of Ce³⁺ in all hosts have been calculated and obtained values for Sr₆B₅AlO₁₅, Ba₆B₅AlO₁₅ phosphors are 1888 cm⁻¹ and 1330 cm⁻¹ respectively. PL emission spectra of mixed host aluminoborates have shown slight variations in positions of emission peaks.     

Preparation and luminescent properties of phosphor MGd2(MoO4)4: Eu (M=Ca, Sr and Ba)

Intense red emitting phosphors MGd₂(MoO₄)₄: Eu³⁺ (M=Ca, Sr and Ba) have been synthesized by the simple sol-gel technique. The formation processes and the phase impurity of phosphors are characterized by thermogravimetry-differential thermal analysis (TG-DTA) and power X-ray diffraction (XRD). The narrower size distribution and the regular shape of the phosphor particles are also measured by Field emission scanning electronic microscopy (FE-SEM). Photo-luminescent properties of the phosphors are performed at room temperature. Their excitation spectra present strong absorption at 395 nm near-UV light and 465 nm blue light, which match well with commercial LED chips. The phosphors exhibit satisfactory and excellent red light dominated by 616 nm and their photoluminescence intensity is about 3-4 times stronger than that of phosphor YAG under the 465 nm excitation. In addition, the optimal concentrations of Eu³⁺ for phosphors MGd₂(MoO₄)₄ (M=Ca, Sr and Ba) have also been determined.     

Laser-diode-pumped Passively Q-switched Nd:Sr5(PO4)3F Green Laser

By using a laser-diode as pump source, a Cr4+ :YAG crystal as saturable absorber for passive Q-switch and a KTP as intracavity frequency doubling crystal, we have realized the green Q-switched laser output at 0.5295 μm from a Nd: S-FAP crystal. Output green laser characteristics, such as average power, single pulse energy, pulse width, repetition rate for different small-signal transmission of Cr4+ :YAG and different pump power, were measured. Meanwhile, the coupling rate equations of intracavity frequency doubling with Cr4+ :YAG as passive Q-switch were given and the numerical solution of equations agreed with the experimental results.     

Synthesis and photoluminescence properties of MZr2(PO4)3:Eu3+; Bi3+ (M=Na; K) phosphors

A series of new red phosphors, MZr₂(PO₄)₃:Eu³⁺; Bi³⁺ (M=Na; K), were synthesized using the solidstate reaction method, and their photoluminescence spectra were measured. The MZr₂(PO₄)₃:Eu³⁺; Bi³⁺ (M=Na; K) phosphors were efficiently excited by an ultraviolet (UV; 395 nm) source, and showed intense orange-red emission at 595 nm. Further investigation of the concentration-dependent emission spectra indicated that the MZr₂(PO₄)₃:Eu³⁺; Bi³⁺ (M=Na; K) phosphors exhibit the strongest luminescence intensity when y = 0.01 in NaZr_2(0:95−y)(PO₄)₃:Eu_0.10³⁺, Bi_2y ³⁺ and y = 0.09 in NaZr_2(0.95−y)(PO₄)₃:Eu_0.10³⁺, Bi_2y ³⁺, whereas the relative PL intensity decreases with increasing Bi³⁺ concentration due to concentration quenching. The addition of Bi³⁺ widens the excitation band of NaZr_2(0.95−y)(PO₄)₃:Eu_0.10³⁺, Bi_2y ³⁺ around 320 nm, which provides the useful idea of broadening the excitation band around 300–350 nm to fit the ultraviolet chip.     

Eu3+/Dy3+共掺Sr3Y2(BO3)4荧光粉的发光性质研究

稀土掺杂发光材料一直是科研领域研究的热点,被广泛应用于白光LED、温度传感、显示显像、新能源和激光等领域。基质的结构对于稀土离子光致发光特性有非常重要的影响,在众多发光基质材料中,硼酸盐具有透光范围宽、光学损伤阈值高、较好的热稳定性和化学稳定性等优点。碱土-稀土金属硼酸盐Sr₃Y₂(BO₃)₄具有出色的光学性能,对其发光性能的研究具有重要意义。稀土离子Eu³⁺具4f⁶电子层,是一种典型的下转换发光中心离子,常被选作红色发光材料的激活剂。Dy³⁺具4f⁹电子层,也是一种典型的下转换发光中心离子,在紫外光激发下,在蓝色光区和橙色光区有较强的荧光发射。采用高温固相法合成了Sr₃Y₂(BO₃)₄∶Eu³⁺/Dy³⁺荧光粉,通过XRD和SEM对样品的结构和形貌进行了表征,XRD结果表明,1 0...     

CaMoO4：Eu3+,Bi3+,Li+红色荧光粉的共沉淀制备与表征

采用共沉淀法合成了红色荧光粉Ca_0.75MoO₄：Eu_0.25³⁺、Ca_0.75MoO₄：Eu_0.25-x³⁺,Bi_x³⁺及Ca_0.5MoO₄：Eu_0.25-2x³⁺, Bi_x³⁺,Li_0.25+x⁺,并采用X射线衍射(XRD)、拉曼光谱,扫描电镜(SEM)和荧光光谱(PL)测定分析了其结构形貌特征及发光性能。结果表明：制备的CaMoO₄：Eu³⁺,Bi³⁺,Li⁺红色荧光粉为白钨矿结构,颗粒尺寸约为0.5~1 μm。掺杂Bi³⁺的Ca_0.75MoO₄：Eu_0.25-x³⁺,Bi_x³⁺的相对发光强度明显高于未掺Bi³⁺的Ca_0.75MoO₄：Eu_0.25³⁺荧光粉。Bi³⁺离子的掺杂将吸收来的能量传递给激活离子Eu³⁺,起到了能量传递的作用。当Bi³⁺掺杂量为x=0.005时,在395 nm激发下,主发射峰在616 nm处的相对发光强度最大,但掺杂浓度过高时会出现浓度猝灭现象。另外,电荷补偿剂的掺入能够解决材料中因同晶取代引起的电荷不平衡的问题,以Li⁺作电荷补偿剂、Eu³⁺和 Bi³⁺共掺合成的Ca_0.5MoO₄：Eu³⁺_0.23,Bi_0.01³⁺,Li⁺_0.26红色荧光粉的发光性能强于Ca_0.75MoO₄：Eu_0.25³⁺、Ca_0.5MoO₄：Eu_0.25³⁺, Li_0.25⁺及Ca_0.75MoO₄：Eu_0.24³⁺,Bi_0.01³⁺。     

Ca2SiO4:Dy3+材料的制备及其发光特性

采用高温固相法制备了Ca₂SiO₄:Dy³⁺发光材料.在365nm紫外光激发下,测得Ca₂SiO₄:Dy³⁺材料的发射光谱为一多峰宽谱,主峰分别位于486nm,575nm和665nm处;监测575nm发射峰,测得材料的激发光谱为一多峰宽谱,主峰分别位于331nm,361nm,371nm,397nm,435nm,461nm和478nm处.研究了Dy³⁺掺杂浓度对Ca₂SiO₄:Dy³⁺材料发射光谱及发光强度的影响,结果显示,随Dy³⁺浓度的增大,黄、蓝发射峰强度比(Y/B)逐渐增大,利用Judd-Ofelt理论解释了其原因;随Dy³⁺浓度的增大,Ca₂SiO₄:Dy³⁺材料发光强度先增大,在Dy³⁺浓度为4 mol%时到达峰值,而后减小,根据Dexter理论其浓度猝灭机理为电偶极-电偶极相互作用.研究了电荷补偿剂Li⁺,Na⁺和K⁺对Ca₂SiO₄:Dy³⁺材料发射光谱的影响,结果显示,不同电荷补偿剂下,随电荷补偿剂掺杂浓度的增大,Ca₂SiO₄:Dy³⁺材料发射光谱强度的演化趋势相同,即Ca₂SiO₄:Dy³⁺材料发射峰强度先增大后减小,但不同电荷补偿剂下,材料发射峰强度最大处对应的补偿剂浓度不同,对应Li⁺,Na⁺和K⁺时,浓度分别为4mol%,4mol%和3mol%. 关键词： 白光LED 2SiO₄:Dy³⁺')" href="#">Ca₂SiO₄:Dy³⁺ 发光特性 电荷补偿     

Eu2+激活的Ca3SiO5绿色荧光粉的制备和发光特性研究

研究了Eu²⁺激活的绿色发光材料Ca₃SiO₅的制备条件和发光性质. Eu²⁺中心形成主峰值为501 nm和次峰值为570 nm的特征宽带，两峰值叠加形成发射峰值为502nm的绿色发射光谱带. 利用这些光谱结果和Van Uitert 经验公式，确认Ca₃SiO₅:Eu²⁺中存在两种性质有差异的Eu²⁺发光中心，它们分别占据基质中八配位的Ca²⁺(Ⅰ)格位和四配位的Ca²⁺(Ⅱ)格位. 其激发光谱分布在250—450 nm的波长范围，峰值位于375 nm处，可以被InGaN管芯产生的350—410 nm辐射有效激发. 关键词： 发光 荧光粉 绿色荧光粉 3SiO₅')" href="#">Ca₃SiO₅ 2+')" href="#">Eu²⁺     

正磷酸盐晶体Ba3(PO4)2和Sr3(PO4)2高温拉曼光谱研究

测量了碱土金属正磷酸盐Ba₃(PO₄)₂和Sr₃(PO₄)₂常温及高温拉曼光谱, 对拉曼振动模式进行指认, 并分析了晶体拉曼振动光谱及晶体结构在高温下的变化. 在温度升高的过程中, 拉曼振动频率向低频移动且振动峰宽度展宽, 晶体中的P-O平均键长随温度升高而变长, 但O-P-O的键角并未发生变化. 晶体在900 ℃以下无结构相变发生. 关键词： 3(PO₄)₂和Sr₃(PO₄)₂')" href="#">Ba₃(PO₄)₂和Sr₃(PO₄)₂ 高温拉曼光谱 振动模式 高温结构