Silicon-modified carbohydrate surfactants. IV. The impact of substructures on the wetting behaviour of siloxanyl-modified carbohydrate surfactants on low-energy surfaces

The siloxanyl-modified carbohydrate surfactants investigated consist of the four structural elements: (1) siloxanyl moiety; (2) spacer; (3) carbohydrate unit; and (4) modifying element. By static surface tension (γ_sν — γ_sβ α) measurements the contact angles of the aqueous surfactant solutions above the critical micelle formation concentration (cmc) on nonpolar perfluorinated surfaces (FEP^® plate) were determined. Although the siloxanyl units were found to have a high capacity to level out the interfacial properties, both surface tension and wetting tension react independently to defined changes in the chemical structure of the surfactant molecules. The results of spreading experiments on polyproylene show good correlation with the dependences found by wetting meaurements. © 1997 John Wiley & Sons, Ltd.     

Early Physical Organic Chemistry: Nikolai Aleksandrovich Menshutkin (1842–1907) and Reaction Velocities

The name of Menshutkin is most frequently associated with his eponymous reaction (the quaternization of tertiary amines with alkyl halides). However, he made encyclopedic contributions to the field of reaction kinetics, where he carried out extensive studies of the effects of reactant structure on the rates of esterification of monohydric, dihydric and trihydric alcohols with monocarboxylic acids, and monobasic and dibasic carboxylic acids and anhydrides with monohydric alcohols. In these studies, he deduced an order of reactivity of alcohols in esterification on the basis of their reactions with acetic acid, and the effects of acid structure on the rates of esterification based on the reaction of the carboxylic acid with isobutyl alcohol. When his attention later turned to the substitution chemistry of amines, he defined the parameters that affected their reactions: anilines were less reactive than alkylamines, secondary more reactive than primary amines, and the reaction was accelerated by replacing benzene as a solvent with alcohols. The wide-ranging work of Menshutkin, the physical organic chemist, is discussed.     

Esterification of Tertiary Amides: Remarkable Additive Effects of Potassium Alkoxides for Generating Hetero Manganese–Potassium Dinuclear Active Species

A catalyst system of mononuclear manganese precursor 3 combined with potassium alkoxide served as a superior catalyst compared with our previously reported manganese homodinuclear catalyst 2 a for esterification of not only tertiary aryl amides, but also tertiary aliphatic amides. On the basis of stoichiometric reactions of 3 and potassium alkoxide salt, kinetic studies, and density functional theory (DFT) calculations, we clarified a plausible reaction mechanism in which in situ generated manganese–potassium heterodinuclear species cooperatively activates the carbonyl moiety of the amide and the OH moiety of the alcohols. We also revealed details of the reaction mechanism of our previous manganese homodinuclear system 2 a , and we found that the activation free energy (ΔG^≠) for the manganese–potassium heterodinuclear complex catalyzed esterification of amides is lower than that for the manganese homodinuclear system, which was consistent with the experimental results. We further applied our catalyst system to deprotect the acetyl moiety of primary and secondary amines.     

Zur Synthese und Reaktivität Triflatsubstituierter Siloxanderivate

Synthesis and Reactivity of Triflate Substituted Siloxane Derivatives The reaction of amino substituted siloxane derivatives with trifluoromethanesulfonic acid leads under elimination of ammonium trifluoromethanesulfonate to the formation of siloxanyl triflates. The compounds are characterised by NMR-spectroscopy (²⁹Si, ¹³C, ¹H). The synthetic potential of these siloxanes is shown on selected examples. One interesting point of view is the synthesis of silicon containing oligo- and polymeres, in which siloxane and silylenealkine units are combined.     

Alkyl Formates as Transfer Hydroalkylation Reagents and Their Use in the Catalytic Conversion of Imines to Alkylamines**

Easily accessible via a simple esterification of alcohols with formic acid, alkyl formates are used as a novel class of transfer hydroalkylation reagents, CO₂ acting as a traceless linker. As a proof-of-concept, their reactivity in the transfer hydroalkylation of imines is investigated, using a ruthenium-based catalyst and LiI as promoter to cleave the C−O σ-bond of the formate scaffold. Providing tertiary amines, the reaction displays a divergent regioselectivity compared to previously reported transfer hydroalkylation strategies.     

Direct polyamidation with thionyl chloride in N-methyl-pyrrolidone

Mechanistic features of the reaction promoted by thionyl chloride and amides such as N-methylpyrrolidone (NMP) were studied. The reaction was effective in the amidation of carboxylic acids, but not effective in the esterification. The amidation was affected by the kind and the amount of amides used, most favorably by two equivalents of NMP with respect to the acid. These amides were assumed to be involved in the intermediate formation, and the reaction was proposed to proceed via Vilsmeier adducts derived from thionyl chloride and the amides, and through activation of a carboxylic acid different from an acyl chloride. The reaction was successfully applied to the direct polycondensation of aromatic dicarboxylic acids and diamines in NMP at 70°C to produce polyamides with high molecular weights. Initial reaction of dicarboxylic acids with the adducts, additive effect of tertiary amines, and polycondensation temperatures were studied in terms of the inherent viscosity of the polymers produced.     

Silicon-Modified Carbohydrate Surfactants I: Synthesis of Siloxanyl Moieties Containing Straight-chained Glycosides and Amides

New siloxanyl-modified carbohydrate surfactants of the amide and glycoside type have been synthesized by coupling between defined as well as higher-molecular-weight siloxanes and carbohydrate structures via spacers of different lengths and hydrophilic power. Linear and branched monohydrogen di-, tri-, tetra- and penta-siloxanes and polyhydrogen siloxanes as well as mono- and di-saccharide lactone structures have been found to be good starting materials for the synthesis of amides, often in quantitative yield, whereas glycosides had to be prepared in low-yield multistep sequences including protection/deprotection steps. Selected strategies were applied to polysiloxanes yielding quantitatively a broad variety of carbohydrate-modified comb-like structures. The new substances were characterized by means of ¹³C NMR spectroscopy, GC, capillary GC, GC–MS coupling and elemental analysis.     

Bifunctional Heterogeneous Catalysis of Silica–Alumina‐Supported Tertiary Amines with Controlled Acid–Base Interactions for Efficient 1,4‐Addition Reactions

We report the first tunable bifunctional surface of silica–alumina‐supported tertiary amines (SA–NEt₂) active for catalytic 1,4‐addition reactions of nitroalkanes and thiols to electron‐deficient alkenes. The 1,4‐addition reaction of nitroalkanes to electron‐deficient alkenes is one of the most useful carbon–carbon bond‐forming reactions and applicable toward a wide range of organic syntheses. The reaction between nitroethane and methyl vinyl ketone scarcely proceeded with either SA or homogeneous amines, and a mixture of SA and amines showed very low catalytic activity. In addition, undesirable side reactions occurred in the case of a strong base like sodium ethoxide employed as a catalytic reagent. Only the present SA‐supported amine (SA–NEt₂) catalyst enabled selective formation of a double‐alkylated product without promotions of side reactions such as an intramolecular cyclization reaction. The heterogeneous SA–NEt₂ catalyst was easily recovered from the reaction mixture by simple filtration and reusable with retention of its catalytic activity and selectivity. Furthermore, the SA–NEt₂ catalyst system was applicable to the addition reaction of other nitroalkanes and thiols to various electron‐deficient alkenes. The solid‐state magic‐angle spinning (MAS) NMR spectroscopic analyses, including variable‐contact‐time ¹³C cross‐polarization (CP)/MAS NMR spectroscopy, revealed that acid–base interactions between surface acid sites and immobilized amines can be controlled by pretreatment of SA at different temperatures. The catalytic activities for these addition reactions were strongly affected by the surface acid–base interactions.     

Photostabilizing activity of tertiary hindered amines

The influence of the N-alkyl group of tertiary hindered amines on the photostabilization of polymers was studied. The photostabilizing effects of the tertiary amine derivatives of 4-benzoyloxy-2,2,6,6-tetramethylpiperidine ( 1a ) in polypropylene were compared. All tertiary amine derivatives having α-H to hindered N showed higher effectiveness than 1a . Model liquid phase photoxidations were carried out by irradiating (UV-lamp) the solutions of tertiary hindered amines containing tert-butyl hydroperoxide as a photoinitiator. The tertiary hindered amines were oxidized more easily than corresponding parent hindered amine and converted to the parent amine, which was identified as its salt, resulting from the carboxylic acid produced from the N-alkyl group by oxidation. The thermal reaction of the tertiary hindered amines with tert-butyl hydroperoxide was also studied in the liquid phase. The tertiary hindered amines decomposed tert-butyl hydroperoxide more rapidly than the parent secondary hindered amine, and generated the parent amine. It was also found that the photostabilizing effects of tertiary hindered amines for polyolefins were higher than that of the parent secondary hindered amine.     

One-pot esterification and amidation of phenolic acids

We developed a new one-pot reaction of phenolic acids to afford the corresponding esters and amides through acyl-protected and activated phenolic acid intermediates. The simultaneous protection/activation of phenolic acids with alkylchloroformates proceeded readily in the presence of DMAP at room temperature; subsequent addition of alcohols or amines afforded the corresponding esters or amides. The use of iso-butyloxycarbonyl as the protecting and activating group in the one-pot reactions afforded phenolic esters or amides in 91% average yield. As a practical example of this convenient synthesis, caffeic acid phenethyl ester (CAPE) was readily synthesized from commercially available caffeic acid and phenethyl alcohol in 95% yield, and an isotopomer of CAPE, [3,10-¹³C₂]CAPE, was synthesized in 91% yield from [3-¹³C]caffeic acid and 2-[1-¹³C]phenethyl alcohol. This method may be useful for the convenient esterification and amidation of diverse phenolic acids.     

An unusual Mannich type reaction of tertiary aromatic amines in aqueous micelles

An efficient, unusual Mannich type reaction of tertiary aromatic amines, formaldehyde and 1,3-dicarbonyl compounds is described in aqueous micelles catalyzed by boric acid to afford dialkylaminoarylated 1,3-dicarbonyls. In this unusual Mannich type reaction, tertiary aromatic amines react with formaldehyde to generate an N-alkyl-N-(4-methylenecyclohexa-2,5-dienylidene)alkylaminium intermediate (aza quinone methide), which undergoes nucleophilic addition with 1,3-dicarbonyl compounds. The reaction is highly regioselective, and exclusively para functionalized products are formed in high yields.     

Kinetics and mechanism of osmium (VIII) and ruthenium(III) catalyzed oxidation of aliphatic amines by chloramine-T in alkaline and perchloric acid media

The kinetics of oxidation of aliphatic amines viz., ethylamine, n-butylamine, isopropylamine (primary amines), diethylamine (secondary amine), and triethylamine (tertiary amine) by chloramine-T have been studied in NaOH medium catalyzed by osmium (VIII) and in perchloric acid medium with ruthenium(III) as catalyst. The order of reaction in [Chloramine-T] is always found to be unity. A zero order dependence of rate with respect to each [OH^?] and [Amine] has been observed during the osmium(VIII) catalyzed oxidation of diethylamine and triethylamine while a retarding effect of [OH^?] or [Amine] on the rate of oxidation is observed in case of osmium(VIII) catalyzed oxidation of primary aliphatic amines. The ruthenium(III) catalyzed oxidation of amines follow almost similar kinetics. The order of reactions in [Amine] or [Acid] decreases from unity at higher amine or acid concentrations. The rate of oxidation is proportional to {k′ and k″ [Ruthenium(III)] or [Osmium(VIII)]} where k′ and k″ (having different values in case of ruthenium(III) and osmium(VIII)) are the rate constants for uncatalyzed and catalyzed path respectively. The suitable mechanism consisting with the kinetic data is proposed in each case and discussed.     

Catalytic Thermometric Titrations of Various Mixtures of Nitrogen Bases

The reactions of acetylation of hydroquinone and quinhydrone with acetic anhydride, catalysed by perchloric acid, were used to determine the end point of catalytic thermometric titrations of a number of different amines and amides dissolved either in acetic anhydride or in acetic acid-acetic anhydride (10+1) mixture. In the majority of cases primary and secondary amines could be successfully determined if pKb_b≤9.3, tertiary amines if pK_b≤14, and amides if pK_b≤l5. Thanks to the difference in behaviour of organic bases in acety lation reaction, it was possible in some instances to determine selectively the individual bases in their mixtures. Catalytic titrations appeared to be especially suitable for the determination of extremely weak bases, even in the case of using mixtures of organic solvents, when Potentiometrie titrations could not be employed. Amounts of 2.5·10^?6-8·10^?5 mole of bases were determined with a maximal relative standard deviation less then 2%.     

Determination of molar ratio of primary secondary and tertiary amines in polymers by applying derivatization and NMR spectroscopy

A trifluoroacetic acid derivatization combined with ¹H NMR spectroscopy method for determining the molar ratio of primary, secondary, and tertiary amines in small molecules and polymers was discussed. Amines reacted with trifluoroacetic acid to form their salts RNH₃⁺, R₂NH₂⁺, and R₃NH⁺. The ¹H NMR signals of these protonated amines (NH₃⁺, NH₂⁺, and NH⁺) were separated well in the spectra. Based on the integration of these protonated amine signals, the molar ratio of primary, secondary, and tertiary amines can be calculated.     

Amphiphilic poly(N,N-dimethylamino-2-ethyl methacrylate)-g-poly(ε-caprolactone) graft copolymers: synthesis and characterisation

Amphiphilic poly(N,N-dimethylamino-2-ethyl methacrylate)-g-poly(ε-caprolactone) graft copolymers (PDMAEMA-g-PCL) with various compositions and molecular weights were synthesised via a fully controlled three-step strategy. First, poly(ε-caprolactone) macromonomers (PCLMA) were prepared by ring-opening polymerization (ROP) of ε-caprolactone (CL) initiated by aluminum triisopropoxide (Al(OⁱPr)₃), followed in a second step by quantitative esterification of PCL hydroxy end-groups with a methacrylic acid derivative. Finally, the controlled copolymerization of PCLMA and N,N-dimethylamino-2-ethyl methacrylate (DMAEMA) was carried out by atom transfer radical polymerisation (ATRP) in THF at 60 °C using CuBr ligated with 1,1,4,7,10,10, hexamethyl triethylenetetramine and ethyl 2-bromoisobutyrate as catalyst and initiator, respectively. Furthermore, PDMAEMA-g-PCL graft copolymers were reacted with methyl iodide to convert the pendant tertiary amines into quaternary ammonium iodides increasing accordingly their water solubility. Some preliminary experiments was further carried out by tensiometry and dynamic light scattering in order to shed so light on the tensioactive behaviour of these amphiphilic graft copolymers (with protonated amines or quaternary ammonium cations).     

Regio-and Stereo-selective Synthesis of Peracetylated Carbohydrate Esters of Aromatic Fatty Acid Using p-Toluenesulfonic Acid as Catalyst

This paper describes an efficient synthesis of carbohydrate fatty acid esters based on a highly stereo‐ and regio‐selective esterification. The suitably protected glycosyl was esterified with stearic acid to give mainly the β‐anomer in good yield using p‐toluenesulfonic acid as catalyst. The structures of these compounds were fully confirmed by ¹H, ¹³C NMR, mass spectra and HRMS.     

Polymers of tertiary amines

Polymers of tertiary amines and their hydrochlorides of molecular weights in the range 300–2000 have been prepared, starting from trans-1,4-dichlorobutene-2, and primary amines. The polymers present interesting solubility properties. Variation of the reaction conditions leads to crosslinked insoluble polymers. Reaction of the soluble tertiary amine polymers with organic acid dichlorides leads to polymers of tertiary amine–amides, a new type of polymer.     

Synthesis of n-butyl ester and n-butylamide of methyl-phenylphosphinic acid: Two case studies

n-Butyl methyl-phenylphosphinate and methyl-phenylphosphinic n-butylamide were synthesized by different methods: the reaction of methyl-phenylphosphinic chloride with ⁿBuOH or ⁿBuNH₂, respectively, the T3P®-promoted derivatization of methyl-phenylphosphinic acid with ⁿBuOH or ⁿBuNH₂, the microwave-assisted direct esterification of the model phosphinic acid, and finally the alkylating esterification with n-butyl bromide under phase-transfer-catalytic and microwave-assisted conditions. The different methods, mostly elaborated by us, were compared from practical and environmentally friendly points of view.     

Photo-induced coupling of tertiary amines with Ugi-derived dehydroalanines as a practical device in the synthesis to 2,4-diaminobutyric acid derivatives

An Ir-mediated photocatalytic coupling of tertiary amines with Ugi-dehydroalanines was developed as an entry to medicinally important 2,4-diaminobutyric acid derivatives. In the process the 2,4-diaminobutyric acid framework is assembled directly embedded into a peptoide structure, via the construction of the C₃(sp³)–C₄(sp³) bond, through a CH functionalization. The photocatalyzed oxidation of the tertiary amine produce a free radical intermediate which reacts with the double bond present in the dehydroalanines. The complete protocol comprises an Ugi 4-CR followed by an elimination reaction and the photo-induced coupling. Using this strategy, 15 new diversely substituted unnatural α,γ-diamino acids peptide derivatives were prepared in low to good yields.