Emulsion polymerization of styrene by horseradish peroxidase-mediated initiation

A new horseradish peroxidase (HRP)-catalyzed redox initiating system was successfully applied in the emulsion polymerization of styrene, producing stable polymer colloids and nanospheres. The particle size was about 30–50 nm with a diameter distribution (CV) 14–20% obtained by SEM. The molecular weight, was around 10⁵, and was around 10⁶. All the results were well consistent with the control, potassium persulfate (KPS)-initiating polymerization. The obtained experimental results supported a micelle mechanism similar to that of conventional emulsion polymerization of styrene.     

Oxidative polymerization of phenylenediamines catalyzed by horseradish peroxidase

Ortho-, meta-, and para-phenylenediamines were polymerized using hydrogen peroxide as an oxidant and horseradish peroxidase as a catalyst in mixed solvents of 1,4-dioxane and water. The yield of the polymers was strongly dependent on solvent composition, and maximum yields were obtained at 15–30% 1,4-dioxane. The analysis of circular dichroic spectra of the enzyme suggested that enzyme structure was significantly modified at high 1,4-dioxane contents, which may be responsible for the decrease of catalytic activity of the enzyme. On the basis of IR and electronic spectra of the polymers, it was considered that o- and p-phenylenediamine polymers retain disubstituted benzene nuclei, which suggests that the polymerization proceeded mainly via N—N coupling. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2593–2600, 1998     

Enzymatic oxidative polymerization of para‐imine functionalized phenol catalyzed by horseradish peroxidase

Enzymatic oxidative polymerization of a new para‐imine functionalized phenol derivative, 4‐(4‐hydroxybenzylideneamino)benzoic acid (HBBA), using horseradish peroxidase enzyme and hydrogen peroxide oxidizer has been investigated in an equivolume mixture of an organic solvent (acetone, methanol, ethanol, dimethylformamide, 1,4‐dioxane, and tetrahydrofuran) and phosphate buffer (pH = 5.0, 6.0, 6.8, 7.0, 7.2, 8.0, and 9.0) at different temperatures under air for 24 h. The resulting oligomer, oligo(4‐(4‐hydroxybenzylideneamino)benzoic acid) [oligo(HBBA)], was characterized using ultraviolet–visible, Fourier transform infrared (FT‐IR), ¹H nuclear magnetic resonance (NMR), cyclic voltammetry, size exclusion chromatography, differential scanning calorimetry, and thermogravimetric analyses. Polymerization involved carbon dioxide and hydrogen elimination from the monomer, and terminal units of the oligomer structure consisted of phenolic hydroxyl (–OH) groups at the ends. The polymer is mainly composed of a mixture of phenylene and oxyphenylene units according to ¹H NMR and FT‐IR analyses. Effects of solvent system, temperature and buffer pH on the polymerization have been investigated in respect to the yield and molecular weight (M_n) of the product. The best condition in terms of the highest molecular weight (M_n = 3000 g/mol, DP ~ 15) was achieved in an equivolume mixture of 1,4‐dioxane/pH 5.0 phosphate buffer condition at 35°C. Electrochemical characterization of oligo(HBBA) was investigated at different scan rates. The resulting oligomer has also shown relatively high thermal stability according to thermogravimetric analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Oxidative polymerization of p-alkylphenols catalyzed by horseradish peroxidase

Enzymatic oxidative polymerization of p-alkylphenols using horseradish peroxidase as catalyst has been carried out in two polymerization solvent systems: a mixture of phosphate buffer (pH 7) and 1,4-dioxane, and a reverse micellar solution, yielding powdery polymeric materials. The polymer yield was much dependent upon the type of alkyl group in the monomer as well as the solvent type. In case of the polymerization of umbranched alkylphenols in the aqueous 1,4-dioxane, the polymer yield increased with increasing chain length of the alkyl group from 1 to 5, and the yield of the polymer from hexyl or heptylphenol was almost the same as that of the pentyl derivative. The relationship between the type of substituent and the polymer yield in the reverse micellar system was different from that in the aqueous 1,4-dioxane; the highest yield was achieved from ethylphenol. The resulting polymers had molecular weight of several thousands. The polymer was estimated to be composed from a mixture of phenylene and oxyphenylene units from IR analyses. TG measurement exhibited that the polymer had relatively high thermal stability. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1453–1459, 1997     

有机硫化物用于自由基活性/可控聚合

综述了有机硫化物用于自由基活性聚合的研究进展，对其机理和活性特征进行了简要的讨论。有机硫化物用于自由基活性聚合的研究工作可以追溯到上个世纪80年代，N，N－二乙基二硫代氨基甲酸酯用作光引发一转移－终止剂（Iniferter)，其聚合具有一定的活性特征，但分子量分布较宽，以二硫代羰酸酯和三硫代碳酸酯为链转移剂的可逆加成裂解链转移（RAFT）自由基聚合的发现，在活性自由基聚合领域是一个重要突破，用二硫代羰酸和三硫代碳酸酯作转移剂，在60Co γ-射线辐照下实现了St,AA,MA和MMA等单体的活性自由基聚合，是硫化物用于自由基活性聚合的又一新的进展。     

Enzymatic polymerization of aniline and phenol derivatives catalyzed by horseradish peroxidase in dioxane

Phenylenediamines, 4‐aminophenol and 1,4‐hydroquinone were polymerized via the catalysis of horseradish peroxidase in dioxane at ambient conditions by using hydrogen peroxide as the oxidant. Polymers formed in good yields are black powders soluble in dimethylformamide and dimethylsulfoxide. Several factors influencing the polymer yield were examined using 2‐phenylenediamine as substrate. It was found that pH value gave almost no influence in the range between 6.0 and 7.0, while the polymer yield increased as the concentration of the substrate in dioxane increased. The influence of the oxidant amount was still more obvious; larger excess of the oxidant being necessary in getting higher polymer yield. Using the optimized polymerization conditions, the yield of poly(2‐phenylenediamine) was achieved up to 77.8%. Weight average molecular weight of the polymers are higher than 1 × 10⁴ as determined by gel permeation chromatography. The structure of the polymers was characterized by using nuclear magnetic resonance and infrared techniques. Copyright © 2000 John Wiley & Sons, Ltd.     

Flowerlike hybrid horseradish peroxidase nanobiocatalyst for the polymerization of guaiacol

In this study, the catalytic activity and stability of flowerlike hybrid horseradish peroxidase (HRP) nanobiocatalyst (HRP-Cu ²⁺ ) obtained from Cu ²⁺ ions and HRP enzyme in the polymerization reaction of guaiacol were analyzed. We demonstrated that HRP-Cu ²⁺ and hydrogen peroxide (H ₂ O ₂ ) initiator showed significantly increased catalytic activity and stability on the polymerization of guaiacol compared to that of free HRP enzyme. Poly(guaiacol) was observed with quite high yields (88%) and molecular weights (38,000 g/mol) under pH 7.4 phosphate-buffered saline (PBS) conditions at 60 °C with 5 weight% of HRP-Cu ²⁺ loading. HRP-Cu ²⁺ also shows very high thermal stability and works even at 70 °C reaction temperature; free HRP enzyme denatures at that temperature. Furthermore, HRP-Cu ²⁺ provided considerable repeated use and showed some degree of catalytic activity, even after the fourth recycle, in the polymerization of guaiacol.     

Horseradish peroxidase‐based hybrid nanoflowers with enhanced catalytical activities for polymerization reactions of phenol derivatives

Catalytic activity and stability of HRP‐Cu²⁺ hybrid nanoflowers (hCu‐NFs) in the polymerization reactions of phenol derivatives was investigated. It was observed that the catalytic activity and stability of hybrid nanoflowers on the polymerization of the phenol derivatives was considerably higher compared to free Horseradish peroxidase (HRP) enzyme. The hCu‐NFs effectively polymerized phenolic compounds as a novel nanobiocatalyst and led to polymers having quite high yields, molecular weights, and thermal stabilities compared to free HRP enzyme. The hCu‐NFs provide substantial repeated use and showed some degree of catalytic activity even after fourth cycle experiment in the polymerization reactions.     

Comparative study of horseradish mutant forms by radioenzymology

Radioenzymology was used to study the recombinant and mutant forms of horseradish peroxidase, namely, F221W, Q176E, Q176A, S35K, E64P, E64S, S35A, and S35KQ176E. Both removal of the Trp residue and introduction of an additional one result in a simpler dose response; the insertion of polar residues stabilizes the enzyme molecule through realization of a more closed conformation. The greatest oscillation changes were found for the replacement by Ala. It was assumed that the binding site of guaiacol as a substrate is located near the residue 64, which is structurally related to the residue 176 and the heme. A scheme of formation of the intermediate through rotation of the Trp aromatic ring was proposed.     

Phase-Transfer catalyzed free-radical polymerization of acrylonitrile

The kinetics of phase-transfer catalyzed free-radical polymerization of acrylonitrile (AN) was carried out with water-soluble initiator peroxomonosulphate (PMS) with phase-transfer catalysts (tetrabutylammonium chloride and benzyltributylammonium chloride (TBAC and BTBAC) in tolune/water two-phase systems in the temperature range of 45–55°C at fixed pH (4) and ionic strength. The rates of polymerization (R_p) were evaluated at various values of [PMS], [PTC], and [AN]. It has been observed that the rates of polymerization increase with an increase of [AN], [PMS], and [PTC]. A kinetic scheme has been proposed to account for the experimental observations. © 1994 John Wiley & Sons, Inc.     

Thermal transport and chemical effects of fillers on free-radical frontal polymerization

Frontal polymerization (FP) is a process in which a front propagates in a localized reaction zone, converting monomer into polymer through the coupling of thermal diffusion with the Arrhenius kinetics of an exothermic reaction. Fillers are added to control the rheological properties of the formulation and to enhance the mechanical properties of the product. However, the thermal and chemical effects of these fillers on the front propagation have not been thoroughly explored. Herein we report the thermal and chemical effects of fillers on free-radical frontal polymerization. It was found that fillers with high thermal diffusivities, such as milled carbon fiber and boron nitride increased the front velocity. Despite their high thermal diffusivities, fillers such as aluminum and alumina decreased the front velocity. This is likely due to the radical-scavenging ability of aluminum oxide, which was explored with clay minerals. It was found that the presence of water within clay fillers can also decrease the front velocity. To probe the chemical effects, acid-activated clay minerals were utilized. The results demonstrate that some fillers can increase front velocity through their high thermal diffusivities while others decrease it by acting as radical scavengers.     

全氘代苯乙烯自由基本体聚合反应研究

以偶氮二异丁腈（ＡＩＢＮ）为引发剂,首次研究了高转化率下,温度,引发剂用量等对全氘代苯乙烯自由基本体聚合反应的影响。实验发现,较低的反应温度下,氘代单体聚合产物分子量随温度的升高而降低的速率大于非氘代单体;而温度高于９０℃时,升高温度对两者分子量的影响均不十分明显。     

Comparative study of the inactivation of horseradish peroxidase under the effect of H2O2 and ionizing radiation

The inactivation of native and recombinant horseradish peroxidase in the presence of hydrogen peroxide and under ionizing radiation was studied. The types of peroxidase activity differ in sensitivity towards the inactivating effect of H₂O₂: the activity in relation to the iodide ion is more stable than the activity in relation to ammonium 2,2-azinobis(3ethylbenzothiazoline-6-sulfonate) (ABTS) ando-phenylenediamine. Similar inactivation was observed in the course of the radiolysis of peroxidase. It was assumed that the initial period of peroxidase inactivation in the presence of hydrogen peroxide has a radical nature and is related to the generation of Superoxide radicals, which modify the protein moiety, resulting in the destruction of heme. The R-670 compound was not formed under the conditions studied. However, the E EI transition occurred, depending on the radiation dose and the enzyme concentration.Translated fromIzyestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 176–179, January, 1995.     

Mechanism of peroxidase-catalyzed oxidation. Substrate-substrate activation in horseradish peroxidase-catalyzed reactions

The structure and functions of peroxidases are characterized. Attention is focused on the mechanisms of action of horseradish peroxidase in reactions with different substrates and on correlations between structure and functions of various heme-containing proteins. The phenomenon of substrate-substrate activation typical of peroxidase-catalyzed reactions is discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1. pp. 25–32, January, 1996.     

Polymeric Forms of Plant Flavonoids Obtained by Enzymatic Reactions

Naringenin is one of the flavonoids originating from citrus fruit. This polyphenol is mainly found in grapefruit, orange and lemon. The antioxidant and antimicrobial properties of flavonoids depend on their structure, including the polymeric form. The aim of this research was to achieve enzymatic polymerization of naringenin and to study the properties of poly(naringenin). The polymerization was performed by methods using two different enzymes, i.e., laccase and horseradish peroxidase (HRP). According to the literature data, naringenin had not been polymerized previously using the enzymatic polymerization method. Therefore, obtaining polymeric naringenin by reaction with enzymes is a scientific novelty. The research methodology included analysis of the structure of poly(naringenin) by NMR, GPC, FTIR and UV-Vis and its morphology by SEM, as well as analysis of its properties, i.e., thermal stability (DSC and TGA), antioxidant activity (ABTS, DPPH, FRAP and CUPRAC) and antimicrobial properties. Naringenin oligomers were obtained as a result of polymerization with two types of enzymes. The polymeric forms of naringenin were more resistant to thermo-oxidation; the final oxidation temperature T_o of naringenin catalyzed by laccase (poly(naringenin)-laccase) was 28.2 °C higher, and poly(naringenin)-HRP 23.6 °C higher than that of the basic flavonoid. Additionally, due to the higher molar mass and associated increase in OH groups in the structure, naringenin catalyzed by laccase (poly(naringenin)-laccase) showed better activity for scavenging ABTS^+• radicals than naringenin catalyzed by HRP (poly(naringenin)-HRP) and naringenin. In addition, poly(naringenin)-laccase at a concentration of 5 mg/mL exhibited better microbial activity against E. coli than monomeric naringenin.     

辣根过氧化物酶酶促体系引发丙烯酰胺聚合的研究

对辣根过氧化物酶(HRP)、H2O2和乙酰丙酮(ACAC)组成的三元醇促体系引发的丙烯酰胺(AAM)聚合进行了研究。在膨胀计中考察了反应温度和HRP、ACAC、H2O2及AAM初始浓度对酶促体系引发AAM聚合动力学行为的影响,确定了适宜的反应条件。用FTIR和GPC对聚合产物进行表征,得到的聚丙烯酰胺的数均分子量为10^5-10^6,分子量分布指教DI为2-3。     

胶囊固定化辣根过氧化物酶酶促体系引发丙烯酰胺聚合研究

研究了以海藻酸钠／壳聚糖／海藻酸钠为囊壁材料的胶囊固定化辣根过氧化物酶的制备及其影响因素,并将肢囊固定化辣根过氧化物酶／乙酰丙酮／H2O2酶促体系用于引发丙稀酰胺的聚合。结果表明,作为囊壁材料之一的壳聚糖的平均分子量以1万左右为宜,以柠檬三酸钠溶液为溶芯荆的溶芯时间控制在2～4min时,固定化率可达60％,相对于游离酶,其相对活力约为60％。胶囊固定化辣根过氧化物酶／乙酰丙酮／H2O2酶促体系可引发丙稀酰胺的聚合。     

Quantitative theory of iniferter polymerization. I. Kinetics

On the basis of a rather general scheme of elementary reactions of radical polymerization conducted in the presence of iniferters, kinetic equations have been derived describing this process over the whole range of monomer conversion. Proceeding from thorough analysis of these equations, different regimes of polymerization have been found that differ in values of order with respect to the iniferter and monomer of the initial rate of polymerization. Conditions for kinetic parameters have been formulated whose fulfillment predetermines that radical polymerization occurs according to the iniferter mechanism. © 1994 John Wiley & Sons. Inc.     

Comparative studies of stability of native and recombinant horseradish peroxidase inactivated by radiation and other factors

Comparative studies of the inactivation of native and recombinant horseradish peroxidase in the course of an enzymatic reaction, at elevated temperatures and in a wide range of radiation doses, have been performed. The protective effect of the carbohydrate component of the native peroxidase providing for stabilization of the enzyme against various inactivating factors was demonstrated. It was proposed that radioactive inactivation is related to dysfunction in heme interaction with the protein component and to an increase in the conformational mobility around the active site of the enzyme.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2230–2233, December, 1994.     

Kinetic behavior in free-radical polymerization of isomer methacrylic monomers with active functional groups as side substituents

The kinetic behavior of the free-radical polymerization of 2-hydroxy-4-N-methacrylamidobenzoic acid (4-HMA) and 2-hydroxy-5-N-methacrylamidobenzoic acid (5-HMA) in a solution of N,N-dimethylformamide is described. The methacrylic monomers 4-HMA and 5-HMA were isomers in which the phenolic and carboxylic functional groups were in different positions on the side aromatic ring with respect to the methacrylamide group. Semiempirical (AM1 and PM3 treatments) and ab initio (6-31G**) quantum mechanical calculations indicated the existence of intramolecular H-bonding between the phenolic and carboxylic groups. These calculations also indicated a slightly higher reactivity of 4-HMA with respect to 5-HMA under the same experimental conditions as obtained from the frontier orbital interactions between the highest molecular orbital of the monomers and the singly occupied molecular orbital of the radical obtained by the reaction of a methyl radical with the corresponding monomer. Gravimetric study of the free-radical polymerization of 4-HMA and 5-HMA at several temperatures ranging from 50 to 150 °C demonstrated this behavior. The kinetic results obtained and the average molecular weights of the polymers prepared at different temperatures indicated that the monomer 4-HMA had a slightly higher reactivity at low temperatures (50–90 °C), whereas at higher temperatures (120–150 °C), the reactivity of both monomers became similar as a consequence of the “dead-end” radical polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4528–4535, 1999