Interaction of iodine species with glycogen at high concentrations of iodine

Glycogen–iodine (GI) complex formation has been studied at different concentrations of iodine and glycogen. For each glycogen concentration (0.25, 0.125, 0.0625, 0.0313 g/L), the iodine concentration was varied from 0.0317 to 1.59 g/L and the absorbance readings were taken at 453 and 560 nm (GI wavelengths of maximum absorbance). The 453 nm absorbance curves for the GI solution (GI complex and unreacted iodine), and that of the pure iodine solution (without glycogen) level off at a high iodine concentration, and give a peak in the subtracted curve. The 560 nm curves consistently increase in absorbance, and no peak is noticed in the subtracted curve. The spectra of concentrated iodine solutions in water and alcohol suggest the formation of neutral iodine clusters. We suggest that these iodine clusters do not react with glycogen, and that the GI complex formation takes place by the addition of I₂ molecules. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 927–931, 1997     

Iodine binding by amylopectin and stability of the amylopectin–iodine complex

The iodine binding capacity (IBC) of amylopectin (AP, from potatoes) is determined to be around 0.38% (w/w) of the total AP in the solution. The mass of iodine bound comprises about 13.6% of the mass of AP involved with the complex, suggesting that with every four iodine atoms bound there are 23 anhydroglucose residues (AGU). Since our previous study indicates that four iodine atoms within the helix of 11 AGUs form a chromophore unit in the API complex, only 48% of the AGUs (11 out of 23) in the AP molecule are directly involved with the iodine. The heat of reaction for the API complex formation is determined to be around ?47 kJ/mol of I–I units bound and is significantly lower in magnitude than that of the amylose-iodine (AI) complex [Biopolymers, 31 , 57 (1991)]. A possible mechanism has been proposed for the formation of AI and API complexes with fixed compositions. © 1994 John Wiley & Sons, Inc.     

Chromophore and spectrum of the glycogen–iodine complex

The experimental UV-vis spectrum of the glycogen-iodine (GI) complex shows certain features remarkably similar to that of the amylopectin-iodine (API) complex [J. Polymer. Chem. 32, 2257 (1994)], suggesting a strong similarity between the API and the GI structures. As in the API complex, a nearly linear polyiodine unit, I₄, at an interiodine distance of around 3 Å is expected to exist within the helix of 11 anhydroglucose units (AGUs). There are several other spectral features that suggest the presence of another similar but more loosely bound iodine species with a longer interiodine distance of 3.1 Å. These findings suggest the involvement of two different types of glycogen chains in binding iodine molecules. © 1996 John Wiley & Sons, Inc.     

Formation of poly(vinyl alcohol)–iodine complexes in solution

The effect of the dissolved state of poly(vinyl alcohol) (PVA) molecules in water on the color development due to PVA–iodine complexes was investigated at each given PVA and iodine concentration using two kinds of syndiotactic-rich PVA (S-PVA) which are unstable in water because of the formation of intermolecular hydrogen bonds and form the complex easily. In the reaction mixtures prepared by mixing PVA solutions and an iodine solution, the color development was constant and independent of standing time of the PVA solution before the addition of iodine up to a certain time, after which it decreased with the standing time. The color development obtained with use of the PVA solution allowed to stand for a fixed time was higher for S-PVA with a lower s-(diad)%. In the case of the reaction mixture prepared by dissolving PVA in an iodine solution, the color development was higher for S-PVA with a higher s-(diad)%. The initial ratio of the I₅⁻/I₃⁻ and the rate of decrease in the ratio of I₅⁻/I₃⁻ were larger than those in the preceding case. The color development decreased for the PVA with an s-(diad) % of 58, whereas it increased for the PVA an s-(diad) % of 61.3 with increasing propanol content, an inhibitor of gelation. From these results, the aggregates of PVA molecules have been assumed to play an important role in forming the complexes. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1701–1709, 1997     

Determining the chromophore in the amylopectin–iodine complex by theoretical and experimental studies

A partial hydrolysis of amylose followed by the addition of iodine provides a spectrum almost identical to that of the amylopectin–iodine (API) complex suggesting the involvement of smaller “amylose-like” units in the API complex. Our theoretical studies on different polyiodine and polyiodide species suggest that a nearly linear I₄ unit stabilized within the cavity of a small “amylose-like” helix is responsible for the characteristic API spectrum. Since there are 2.75 anhydroglucose residues (AGU) for every iodine atom in the amylose–iodine (AI) complex and a structural similarity exists between the API and the AI (amylose–iodine) complexes, we identify (C₆H₁₀O₅)₁₁I₄ to be the chromophore in the API complex. © 1994 John Wiley & Sons, Inc.     

Photopolymerization of methyl methacrylate with the use of morpholine-chlorine charge transfer complex as the photoinitiator

Polymerization of methyl methacrylate (MMA) was kinetically studied under photo condition using near UV visible light at 40°C and employing morpholine (MOR)–chlorine (Cl₂) charge transfer (C-T) complex as the photoinitiator. The rate of polymerization (R_p) was dependent on morpholine/chlorine mole ratio; the 1 : 2 (MOR–Cl₂) C-T complex acted as the latent initiator complex, C, which underwent further complexation with the monomer molecules to give the actual initiator complex, I. Using 1 : 2 (MOR-Cl₂) C-T complex as the latent initiator, the initiator exponent evaluated for bulk photopolymerization of MMA was 0.071 and monomer exponent determined from studies of photopolymerization in benzene diluted system was 1.10. Benzoquinone behaved as a strong inhibitor and the polymers tested positive for the incorporation of chlorine atom end groups. Polymerization followed a radical mechanism. Kinetic nonideality as revealed by low (≪0.5) initiator exponent and a monomer exponent of greater than unity were explained in terms of primary radical termination effect. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1681–1687, 1997     

Amylose-iodine complex formation without KI: Evidence for absence of iodide ions within the complex

Amylose-iodine (AI) complex has been synthesized in aqueous solution without added KI. Complex formation (with solid iodine in amylose solution) is maximized at approximately 35°C and decreases beyond that temperature. Ion-selective electrode (ISE) measurements of an aqueous solution of iodine and AI complex indicate that there is no change in the I⁻ ion concentration when the complex forms. This suggests that I⁻ ions (including I, I, and others) cannot be involved in forming the AI complex. The present work also reports a new and simple method for providing both the iodine-binding capacity (IBC) of amylose and the dissociation mechanism for the AI complex. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2711–2717, 1999     

Solution cation‐binding properties of segmented polyethylene oxide–A 13C NMR spectroscopic study

Two segmented polyethylene oxides, SPEO‐3 and SPEO‐4, were prepared using a novel transetherification methodology. Their structures were confirmed by ¹H and ¹³C NMR spectroscopy. The complexation of these SPEO's with alkali–metal ions in solution was investigated by ¹³C NMR spectroscopy. The mole‐fraction method was used to determine the complexation ratio of SPEO with LiClO₄ at 25 °C, which showed that these formed 1:1 (polymer repeat unit/salt) complexes. The association constant, K, for the complex formation was calculated from the variation of the chemical shift values with salt concentration, using a standard nonlinear least‐square fitting procedure. The maximum change in chemical shift (Δδ) and the K values suggest that both SPEO‐3 and SPEO‐4 formed stronger complexes with lithium salts than with sodium salts. Unexpectedly, the K values were found to be different, when the variation of δ of different carbons was used in the fitting procedure. This suggests that several possible complexed species may be in equilibrium with the uncomplexed one. Structurally similar model compounds were also prepared and their complexation studies indicated that all of them also formed 1:1 complexes with Li salts. Interestingly, it was observed that the polymers gave higher K values suggesting the formation of more stable complexes in polymers when compared to the model analogues. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2635–2644, 2000     

Synthesis and characterization of carbamoylphosphonate monomer and its copolymer with styrene. II

A monomer, diethyl α,α-dimethyl-m-isopropenylbenzyl carbamoylphosphonate, has been prepared by the base-catalyzed reaction of the isocyanate m-TMI (α,α-dimethyl-m-isopropenylbenzylisocyanate) with diethyl phosphite. The structure of the carbamoylphosphonate monomer and its styrene copolymer was confirmed spectroscopically, and the nature of the hydrogen bondings in the  NHC(O)P(O)(OR)₂ unit in the monomer and copolymer is discussed in detail. A bulk polymerization of the carbamoylphosphonate is very slow and tends to yield a crosslinked product, but a solution polymerization produced the soluble copolymers. The T_g(midpoint) of the homo-polymer is low, 67°C, and its capacity to complex UO₂(NO₃)₂ is very high, 28 wt % (19 mol %). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 889–899, 1997     

PEG‐Induced Synthesis of Coordination‐Polymer Isomers with Tunable Architectures and Iodine Capture

Controllable synthesis of coordination polymer (CP) isomers and revealing their structure–property relationships remain enormous challenges. Three new supramolecular isomers have been synthesized by tuning the poly(ethylene glycol) (PEG) content in the feed. These supramolecular isomers have the same framework formula of [Cu₂I₂(tppe)] and different architectures from the classical 2D stacking framework to a 3D entangled system with the coexistence of interpenetration and polycatenation, and a 3D topological framework. Interestingly, these CPs could be utilized for capturing iodine molecules. According to multiple complementary experiments and crystallographic analyses, iodine capture is mainly based on halogen‐bond interactions in the inorganic {Cu₂I₂} building blocks of the framework. The present study describes a structure–property relationship in supramolecular isomerism with distinct topological structures.     

Influence of an iodine treatment on the structure and physical properties of Bombyx mori silk fibroin fiber

Silk fibroin (SF) fiber from the Bombyx mori silkworm was treated with a 1.23 N iodine/potassium iodide (I₂–KI) aqueous solution, and the structure and physical properties were investigated to elucidate the effects of the iodine treatment. The SF fiber absorbed polyiodide ions such as I and I by immersion in the I₂–KI solution, and the weight gain of the SF fiber increased with the treatment time; it became saturated at about 20 wt % after 40 h. The results of the weight gain, Fourier transform infrared spectroscopy, and X‐ray diffraction measurements suggested that polyiodide ions mainly entered the amorphous region. Moreover, a new sharp reflection in the meridional direction, corresponding to a period of 7.0 Å, was observed and indicated the possibility of the formation of a mesophase structure of β‐conformation chains. Dynamic viscoelastic measurements showed that the molecular motion of the crystalline regions at about 220 °C was enhanced and shifted to lower temperature by the introduction of polyiodide ions. This indicated that the iodine component weakened the hydrogen bonding between the SF molecules forming the β‐sheet structure and caused molecular motion of the crystal to occur more easily with heating. With heating above 270 °C, the iodine component introduced intermolecular crosslinking to SF, and the melt flow of the sample was inhibited. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3418–3426, 2006     

Dielectric relaxation analysis of cellulose oligomers and polymers in dependency on their chain length

For all cellulose‐like oligo‐ and polyglucans, beginning with the dimer cellobiose, a broad relaxation process at low temperatures is observed using the dielectric relaxation spectroscopy method. This relaxation has its molecular origin in orientational motions of the sugar rings via the glucosidic linkages. We investigated the dynamics of this main chain motion for β(1‐4) oligoglucans with 2, 3, 4, or 5 anhydroglucose units (AGUs), as well as for β(1‐4) polyglucans having a degree of polymerization molecular weight averages (DP_w) of 23, 37, 50, and 140 up to 3000. As a result we found that the activation energy (E_a) of the segmental chain motion has the lowest value (32 ± 1 kJ/mol) for cellobiose, followed by passing through a maximum for a DP between 7 and 15 with E_a = 51 ± 1 kJ/mol. Subsequently, the activation energy is decreased at a value around 44.8 ± 1.2 kJ/mol for chains containing more than 100 AGUs. Obviously, from a distinctly molecular dimension (DP_w ～ 100) the mean number of AGUs that take part in the local chain motions and cross‐correlation between the motions of neighboring AGUs are nearly the same and the chain length has no influence on the segmental motion. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2491–2500, 2001     

Face‐Capped M4L4 Tetrahedral Metal–Organic Cage: Iodine Capture and Release,Ion Exchange,and Electrical Conductivity

An M⁴L₄ type metal–organic cage (MOC‐19) has been synthesized from the one‐pot reaction of tri(pyridinylmethylene)phenylbenzeneamine (TPBA) with hydrated Zn(ClO₄)₂ under mild conditions and characterized by single‐crystal X‐Ray diffraction. Iodine capture studies show that the porous crystals of MOC‐19 exhibit a versatile behavior to accumulate iodine species not only in vapor (for I₂) but also in solution (for I₂ and I₃^?), and anion‐exchange experiments indicate the capacity to extract IO₃^? anions from aqueous solution. Enrichment of iodine species from KI/I₂ aqueous solution proceeds facilely, revealing a pseudo‐second‐order kinetics of I₃^? adsorption. Furthermore, the electrical conductivity of MOC‐19 single crystals could be significantly altered by I₂ inclusion.     

Oxaaza macrocycles constructed on poly(ethylenimine) through Ni(II)-template cyclization and their metal binding

Polymeric oxaaza macrocycles (PEI-OAM) are constructed on poly(ethylenimine) (PEI) by Ni(II)-template alkylation of PEI with diethyleneglycol ditosylate. The K_f values for Ni(II), Cu(II), and Zn(II) complexes of PEI–OAM are measured at pH 3.5–10 at 25°C. At pH 7, log K_f values for these complexes are 9–15, indicating that the polymeric oxaaza macrocycles can readily reduce concentrations of these metal ions below ppb level. Metal binding ability of nonpolymeric oxaaza macrocyclic compounds reported in the literature decreases rapidly as pH is lowered below 7, whereas that of PEI–OAM decreases to lesser extents. This is attributed to the electrostatic effects exerted by the ammonium ions of PEI backbone. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 527–532, 1997.     

Kinetics of Ag+ contained polymeric complex membranes for facilitated olefin transport

The reactions of silver ion complexes with polyethylene-graft-poly(acrylic acid) (PE-g-AA) and the olefin reversible coordinates with the PE-g-AA–Ag⁺ complex membranes were studied. Infrared and nuclear magnetic resonance spectra confirmed the complex formation between the carboxylic acid of the PE-g-AA and the Ag⁺ ion. Also, the Ag⁺ ion in PE-g-AA-Ag⁺ membrane was assumed to be a fixed carrier that adsorbs and transports olefin, thereby causing a selective olefin/paraffin separation. A theoretical model of the PE-g-AA-Ag⁺ (olefin) complex was proposed. The coordination number of Ag⁺ ion binding to the carboxylic acid of PE-g-AA is about 1.6 in glycerol solution. The coordination number of olefin binding to the Ag⁺ in the PE-g-AA–Ag⁺ complex membrane is 1. Moreover, the kinetics of olefin binding to the PE-g-AA–Ag⁺ complex membranes were studied. The equilibrium, association, and dissociation constants were also presented. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 909–917, 1997     

Photopolymerization of methyl methacrylate using a morpholine–sulfur dioxide charge-transfer complex as the photoinitiator

Photopolymerization of the vinyl monomer (M) of methyl methacrylate (MMA) was kinetically studied by using near-UV/visible light at 40°C and employing a morpholine (MOR)–sulfur dioxide (SO₂) charge-transfer (C-T) complex as the photoinitiator. The rate of polymerization (R_P) was found to be dependent on the morpholine: sulfur dioxide mole ratio; the 1 : 2 (MOR–SO₂) complex acted as the latent initiator complex C which underwent further complexation with the monomer molecules to give the actual initiating complex I. Using the 1 : 2 (MOR–SO₂) C-T complex as the latent initiator, the observed kinetics may be expressed as R_P [MOR–SO₂]^0.27[M]^1.10. Benzoquinone behaved as a strong inhibitor. Polymers obtained tested positive for the incorporation of a sulphonate-type end group. Polymerization followed a radical mechanism. Kinetic nonideality as revealed by a low initiator exponent and monomer exponent of greater than unity was explained on the basis of a prominent primary radical termination effect. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1973–1979, 1998     

Poly(ethylene glycol)–poly(L‐lactide) star block copolymer hydrogels crosslinked by metal–ligand coordination

The aqueous solution behavior and thermoreversible gelation properties of pyridine‐end‐functionalized poly(ethylene glycol)–poly(L ‐lactide) (PEG–(PLLA)₈–py) star block copolymers in the presence of coordinating transition metal ions were studied. In aqueous solutions, the macromonomers self‐assembled into micelles and micellar aggregates at low concentrations and formed physically crosslinked, thermoreversible hydrogels above a critical gel concentration (CGC) of 8% w/v. In the presence of transition metal ions like Cu(II), Co(II), or Mn(II), the aggregate dimensions increased. Above the CGC, the gel–sol transition shifted to higher temperatures due to the formation of additional crosslinks from intermolecular coordination complexes between metal ions and pyridine ligands. Furthermore, as an example, PEG–(PLLA)₈–py hydrogels stabilized by Mn(II)–pyridine coordination complexes were more resistant against degradation/dissolution when placed in phosphate buffered saline at 37 °C when compared with hydrogels prepared in water. Importantly, the stabilizing effect of metal–ligand coordination was noticeable at very low Cu(II) concentrations, which have been reported to be noncytotoxic for fibroblasts in vitro. These novel PEG–(PLLA)₈–py metallo‐hydrogels, which are the first systems to combine metal–ligand coordination with the advantageous properties of PEG–PLLA copolymer hydrogels, are appealing materials that may find use in biomedical as well as environmental applications like the removal of heavy metal ions from waste streams. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Der erste Polyiodokomplex – Triethylsulfoniumtriiodomercurat(II)-tris(diiod), (Et3S)[Hg2I6]1/2 · 3 I2

The First Polyiodo Complex – Triethylsulfoniumtriiodomercurate(II)-tris(diiodine), (Et₃S)[Hg₂I₆]_1/2 · 3 I₂ After Raman spectroscopic investigation of the system HgI₂/Et₃SI_x, x = 3, 5, 7, triethylsulfoniumtriiodomercuratetris(diiodine), (Et₃S)[Hg₂I₆]_1/2 · 3 I₂ was synthesized by reacting of HgI₂ and liquid Et₃SI₇. The compound crystallizes at room temperature triclinically in the space group P1 with a = 879.4(7), b = 1 209.1(5), c = 1 291.5(5) pm, α = 96.16(3)°, β = 103.82(6)°, γ = 99.05(5)° and Z = 2. The crystal structure is composed of disordered Et₃S⁺ cations, the centrosymmetric complex anion [HgI_2/2I₂]₂^2? and three connecting iodine molecules I₂.     

Viscosity behavior of polyelectrolyte copolymers containing sulfonate groups in mixed organic solvents

Copolymerization of 2-acrylamido-2-methylpropane sulfonic acid (AMPS, monomer 1) with 2-hydropropyl methacrylate (HPM, monomer 2) was conducted in ethylene glycol/water (1 : 1 in weight) at 70°C. The reactivity ratios estimated from the copolymer composition at low conversion are r₁ = 2.31 ± 0.25 and r₂ = 11.70 ± 1.05. The azeotropic composition was found at the monomer mole ratio AMPS/HPM equal to 8/2. Viscosity of these copolymers was measured in dimethyl sulfoxide (DMSO) and DMSO/tetrahydrofuran (THF) mixed solvent at 25 ± 0.05°C. Polyelectrolyte behavior was observed for all the copolymers, even in the mixed solvent containing 65 wt % of THF. The reduced viscosity at constant polymer concentration decreased with increasing THF content in the mixed solvent. The copolymers having AMPS repeat units more than 42 mol % precipitated in the mixed solvent when the THF was beyond 68 wt %. The viscosity reduction and precipitation in the copolymer solutions with increasing THF can be attributed to the dipole–dipole attraction between ion-pairs formed in less-polar medium. This is helpful in understanding the volume phase transition in highly charged hydrogels caused by mixing solvents. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1433–1438, 1997     

A Compact Tetrathiafulvalene–Benzothiadiazole Dyad and Its Highly Symmetrical Charge‐Transfer Salt: Ordered Donor π‐Stacks Closely Bound to Their Acceptors

A compact and planar donor–acceptor molecule 1 comprising tetrathiafulvalene (TTF) and benzothiadiazole (BTD) units has been synthesised and experimentally characterised by structural, optical, and electrochemical methods. Solution‐processed and thermally evaporated thin films of 1 have also been explored as active materials in organic field‐effect transistors (OFETs). For these devices, hole field‐effect mobilities of μ_FE=(1.3±0.5)×10^?3 and (2.7±0.4)×10^?3 cm² V s^?1 were determined for the solution‐processed and thermally evaporated thin films, respectively. An intense intramolecular charge‐transfer (ICT) transition at around 495 nm dominates the optical absorption spectrum of the neutral dyad, which also shows a weak emission from its ICT state. The iodine‐induced oxidation of 1 leads to a partially oxidised crystalline charge‐transfer (CT) salt {( 1 )₂I₃}, and eventually also to a fully oxidised compound { 1 I₃} ? 1/2I₂. Single crystals of the former CT compound, exhibiting a highly symmetrical crystal structure, reveal a fairly good room temperature electrical conductivity of the order of 2 S cm^?1. The one‐dimensional spin system bears compactly bonded BTD acceptors (spatial localisation of the LUMO) along its ridge.