Influence of the stoichiometry of epoxy-cyanate systems (non-catalyzed and catalyzed) on molten state reactivity

Based on an FT-IR and ¹³C-NMR spectroscopic study using model compounds, we previously proposed an epoxy-cyanate coreaction path in the molten state, by identifying all chemical species and their role in the reaction mixture. These data were then applied to difunctional systems involving diglycidyl ether of bisphenol A (DGEBA) and bisphenol A dicyanate (BADCy), with mixtures prepared in different epoxy/cyanate ratios. Using FT-IR and solid state ¹³C-NMR spectroscopic analyses, we show the effect of epoxy group concentration on the final structure of the system. We were able to show that epoxy functions react on the triazine rings formed in the first step of homopolymerization of cyanates, and that the structure of the final system depends on their initial concentration. In addition, a study of difunctional systems for identical cyanate-epoxy stoichiometry was undertaken in the presence of anionic (imidazole) and metallic (AcAcCu and AcAcCr) catalysts in order to determine their effect on the reactivity of the two monomers and on the structure of the final system. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3101–3115, 1997     

Synthesis and characterization of new phosphorus and other heteroatom containing aryl cyanate ester monomers and networks

Several aromatic dicyanate monomers have been synthesized bearing para-linked strong electron withdrawing groups, such as phenylphosphine oxide, sulfone, and carbonyl. These groups increased the reactivity of the cyanate functional groups and eliminated the need for curing catalysts. However, an undesirable decrease in the processing window between the monomer melting point and the onset of cure was also generally observed. An arylene ether phenyl phosphine oxide system was designed that displayed several attractive characteristics such as a low softening point, a wide processing window, cure with no catalyst, high T_g and high char yield in air, suggesting that these new thermosets might show good fire resistance. The dicyanate ester monomers were synthesized in high yield by reacting various bisphenols with cyanogen bromide in the presence of triethylamine. The high reactivity of the cyanate functional groups required that the cyanation reaction be conducted at temperature below 0°C in order to prevent imidocarbonate side reactions. Proton NMR and FT-IR were used to characterize these monomers. The cyclotrimerization curing process was monitored by the disappearance of the carbon-nitrogen triple bond stretch (2270 cm⁻¹). An optimal cure schedule was determined and the cured polycyanurate networks were characterized by DSC, DMTA, and TGA. Tg values were typically > 250°C and 5% weight loss values were observed by TGA in air above 400°C. Several of the dicyanate monomers with sufficiently large processing windows were cured into single lap shear adhesive bonds onto titanium 6/4 and the measurements are reported herein. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 977–987, 1997     

Polycyanurate networks from anethole dimers: Synthesis and characterization

Novel biorenewable bisphenols are obtained through simple and rapid chemical transformation of the natural product trans‐anethole. The corresponding dicyanate esters are thermally cured to give polycyanurate networks. The thermal properties from differential scanning calorimetry, thermogravimetric, and dynamic thermomechanical analyses of the new dicyanate esters compare favorably with similar commercial products. © 2012 Wiley Periodicals, Inc.^? J Polym Sci Part A: Polym Chem, 2012     

Synthesis,characterization, and properties of novel epoxy resins and cyanate esters

We synthesized a novel epoxy (dopotep) and cyanate ester (dopotcy) based on a phosphorus‐containing triphenol (dopotriol). The proposed structures were confirmed by IR, mass spectra, NMR spectra, and epoxy‐equivalent‐weight titration. The synthesized dopotep or dopotcy was copolymerized with diglycidyl ether of bisphenol A (DGEBA), 6′,6‐bis(3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazineyl)methane (F‐a), or dicyanate ester of bisphenol A (BADCY). Thus, copolymers based on DGEBA/dopotep/diphenylmethane (ddm), F‐a/dopotep, BADCY/dopotcy, and DGEBA/dopotcy were developed. The thermal properties, dielectric properties, and flame retardancy of these copolymers were investigated. The curing kinetics of dopotep/ddm and dopotep/diamino diphenylsulfone were studied with differential scanning calorimetry. The microstructure of DGEBA/dopotcy was studied with IR. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3487–3502, 2006     

Further study of the viscoelastic phase separation of cyanate ester modified with poly(ether imide)

In this study, the viscoelastic phase separation process was studied further by time‐resolved light scattering, differential scanning calorimetry, and scanning electron microscopy in the system of poly(ether imide)‐modified bisphenol‐A dicyanate. It was observed that the evolution time of phase structure and relaxation time of diffusion flow of the bisphenol‐A dicyanate were similar with the phase diagram of curing conversion versus content of PEI. The results suggested that the viscoelastic phase separation was affected by the curing conversion of the system at the onset point of phase separation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 517–523, 2006     

Flame retardant polycyanurate thermosets from the cyanate esters of triphenylphosphine oxide

Three cyanate esters containing phosphorus are synthesized in good overall yields starting from bromoanisoles. Di‐ and tricyanates with meta configuration are most stable while para is less so. The para dicyanate ester isomer is particularly affected by water from the atmosphere. The meta dicyanate ester 2 has good thermal properties with glass transition at 268 °C and char yield of 65% in air at 600 °C. All three phosphorus‐containing cyanate esters are low flammability in an open flame. They make highly combustible cyanate esters resins less flammable simply by blending. Mixing 10 wt% dicyanate ester 2 into bisphenol A or E dicyanate esters makes them rate V‐0. Published 2018.^† J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1100–1110     

NCOCH2(CF2)6CH2OCN cyanate ester resin. A detailed study

The NCOCH₂(CF₂)₆CH₂OCN fluoromethylene cyanate ester monomer and resin are synthesized and characterized. The monomer is prepared by a large‐scale bench‐top synthesis, characterized by differential scanning calorimetry, infrared, ¹H‐, ¹³C‐, ¹⁵N‐, and ¹⁹F‐NMR spectroscopies and analyzed for catalytically active impurities. Conversion of the monomer to prepolymer and cured resin is characterized by IR and NMR spectroscopies and kinetically analyzed. Resin properties characterization includes thermal, tensile, dynamic mechanical, dielectric, refractive index, thermodielectric and thermogravimetric stabilities, and water absorption. Relevant property comparisons with the commercial AroCy F cyanate ester resin (6F bisphenol A dycyanate) and a Jeffamine‐bisphenol diglycidyl ether epoxy are made. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 135–150, 1999     

New hydrocarbon side chain liquid crystalline polysiloxane polymers: Synthesis,characterization, and thermotropic behavior

A series of new and high-purity hydrocarbon liquid crystal monomers were synthesized through the acylation reaction, deoxygenation reaction, and Grignard reaction. ¹H-NMR spectra and elemental analyses were used to examine their purity. The liquid crystalline polysiloxane polymers were obtained by grafting the monomers onto poly(methylhydrosiloxane). The thermal transition temperature, mesomorphic properties, and mesophase textures of the monomers and the polymers were determined by differential scanning calorimetry (dsc), polarized optical microscopy, and X-ray diffraction analysis. Moreover, we observed the even–odd effect of the smectic/isotropic transition temperature with the length variation of the substituents. In this study, we found by X-ray diffraction that the liquid crystalline polysiloxane polymers undergo a transition from smectic B to smectic E mesophase. However, dsc has difficulty detecting the phase transition process. By considering the spin–lattice relaxation time (T₁), we can systematically explain the relation between the flexibility of the substituent with the smectic/isotropic transition temperature. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2849–2863, 1998     

Thermal conductivity and properties of cyanate Ester/nanodiamond composites

The aim of this study was to improve thermal conductivity, thermal stability, and mechanical properties of bisphenol A dicyanate ester with the addition of nanodiamond. Cyanate ester/nanodiamond composites containing various ratios of nanodiamond were prepared. Thermal stability and thermal conductivity of the samples were evaluated by thermogravimetric analysis, differential scanning calorimetry, and laser flash method, respectively. The samples were characterized with the analysis such as gel content, water absorption capacity, and stress–strain test. Hydrophobicity of the samples was determined by contact angle measurements. Moreover, the surface morphology of the samples was investigated by a scanning electron microscopy. The obtained results prove that the cyanate ester/nanodiamond composites have good thermal and mechanical properties and can be used in many applications such as the electronic devices, materials engineering, and other emergent. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and characterization of copolyperoxides of indene with styrene, α‐methylstyrene,and α‐phenylstyrene

The oxidative copolymerization of indene with styrene, α‐methylstyrene, and α‐phenylstyrene is investigated. Copolyperoxides of different compositions have been synthesized by the free‐radical‐initiated oxidative copolymerization of indene with vinyl monomers. The compositions of the copolyperoxides obtained from the ¹H and ¹³C NMR spectra have been used to determine the reactivity ratios of the monomers. The reactivity ratios indicate that indene forms an ideal copolyperoxide with styrene and α‐methylstyrene and alternating copolyperoxides with α‐phenylstyrene. Thermal degradation studies via differential scanning calorimetry and electron‐impact mass spectroscopy support the alternating peroxide units in the copolyperoxide chain. The activation energy for thermal degradation suggests that the degradation is dependent on the dissociation of the peroxide (? O? O? ) bonds in the backbone of the copolyperoxide chain. Their flexibility has been examined in terms of the glass‐transition temperature. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2004–2017, 2002     

Synthesis and characterization of novel low‐dielectric cyanate esters

For the purpose of increasing the mobility of residual bisphenol A dicyanate ester (BADCY) during the final stage of curing and achieving a complete reaction of cyanate groups, a small quantity of monofunctional phenol was added to BADCY to form an imidocarbonate, or a small quantity of monofunctional cyanate esters was added to form cyanate ester copolymers. The proposed structures were confirmed with Fourier transform infrared, elemental analysis, mass spectrometry, and NMR spectroscopy. The thermal properties of the cured cyanate esters were measured with dynamic mechanical analysis, thermogravimetric analysis, and dielectric analysis. These data were compared with those for the cured BADCY resin. The cured modified cyanate esters exhibited a lower dielectric constant, a lower dissipation factor, and lower moisture absorption than the cured BADCY system. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2589–2600, 2004     

Low dielectric thermoset. IV. Synthesis and properties of a dipentene‐containing cyanate ester and its copolymerization with bisphenol A dicyanate ester

A 2,6‐dimethylphenol‐dipentene dicyanate ester ( DPCY ) was synthesized from the reaction of 2,6‐dimethylphenol‐dipentene adduct and cyanogen bromide. The proposed structure was confirmed by Fourier transform infrared (FTIR), elemental analysis, mass, and nuclear magnetic resonance (NMR) spectra. DPCY was then cured by itself or cured with bisphenol A dicyanate ester ( BADCY ). Thermal properties of cured epoxy resins were studied using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), dielectric analysis (DEA), and thermogravimetric analysis (TGA). These data are compared with those of BADCY . The cured DPCY exhibits a lower dielectric constant (2.61 at 1 MHz), dissipation factor (29.3 mU at 1 MHz), thermal stability (5% degradation temperature and char yield are 429 °C and 17.64%, respectively), glass transition temperature (246 °C by TMA and 258 °C by DMA), coefficient of thermal expansion (33.6 ppm before Tg and 134.1 ppm after Tg), and moisture absorption (0.95% at 48 h) than those of BADCY , but higher moduli (5.12 GPa at 150 °C and 4.60 GPa at 150 °C) than those of the bisphenol A system. The properties of cured cocyanate esters lie between cured BADCY and DPCY , except for moduli. Moduli of some cocyanate esters are even higher than those of cured BADCY and DPCY . A positive deviation from the Fox equation was observed for cocyanate esters. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3986–3995, 2004     

Synthesis,characterization, and photocuring of siloxane‐oxirane monomers

The aim of this study was to synthesize, characterize, and evaluate alternative monomers for use in dentistry. Three siloxane‐oxirane low‐shrinkage monomers were synthesized, and the products’ conversion was followed by Fourier transform ‐ infrared spectroscopy. The products obtained were characterized by ¹H and ¹³C NMR and evaluated for viscosity and a refractive index. The polymerization was evaluated by formulating two experimental photoinitiation systems, which varied for the presence of 1,2 ethanediol. A ternary system with camphorquinone (CQ), ethyl 4‐dimethylaminobenzoate (EDAB), and diphenyliodonium hexafluorphosphate (DPI) was used as control. The degree of conversion was assessed by differential scanning calorimetry (DSC). The NMR confirmed the synthesis success with 75, 87, and 55% yields for the monomers synthesized. The viscosity and the refractive index of the monomers showed favorable rheological and physical behaviors for application in dentistry. Moreover, the presence of 1,2 ‐ ethanediol increased the degree of conversion of the siloxane‐oxirane monomers. This study showed a simple and effective way to synthesize siloxane‐oxirane monomers with a high potential for application in dental materials. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1728–1733     

On the anionic homo‐ and copolymerization of ethyl‐ and butyl‐2‐cyanoacrylates

Ethyl‐(ECA) and butyl‐2‐cyanoacrylate (BCA) monomers of high purity and acidic stabilization were synthesized and anionically polymerized to homo‐ and copolymers in two different ways: by piperidine‐catalyzed bulk polymerization leading to transparent, brittle films (method A) and by polymerization in aqueous medium in the presence of sodium bicarbonate to obtain white powders (Method B). The molecular structure of the synthesized monomers, homopolymers and copolymers were corroborated by spectral methods. The polymers were studied further by thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), size exclusion chromatography (SEC) and proton nuclear magnetic resonance (¹H NMR). Controlling the composition of the monomer feed and the way the polymerization was performed, it was possible to obtain phase separated or homogeneous cyanoacrylate copolymers with glass transitions varying between the T_g of polyECA and that of polyBCA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5142–5156, 2008     

Reactivity ratios for the terpolymerization of methyl methacrylate,vinyl acetate,and molecular oxygen

The copolymerization of methyl methacrylate (MMA) and vinyl acetate (VAc) under high oxygen pressure was investigated. Copolyperoxides of various compositions were synthesized by the free‐radical‐initiated oxidative copolymerization of MMA and VAc monomers. The copolyperoxide compositions obtained from ¹H and ¹³C NMR spectra were used for determining the reactivity ratios of the monomers. The reactivity ratios indicated a larger proportion of MMA units statistically placed in the copolyperoxides. A theoretical analysis based on semiempirical AM1 calculations was performed to support the reactivity ratios. NMR studies showed irregularities in the copolyperoxide chain due to the cleavage reactions of the propagating peroxide radical. Thermal analyses of the copolyperoxides by differential scanning calorimetry gave evidence for the presence of alternating peroxide units in the copolyperoxide chain. The activation energies of thermal degradation suggested that degradation was controlled by the dissociation of the peroxide (? O? O? ) bond in the backbone of the copolyperoxide chain. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 564–572, 2002; DOI 10.1002/pola.10115     

Cure kinetics of a cobalt catalysed dicyanate ester monomer in air and argon atmospheres from DSC data

A kinetic analysis of the cyclotrimerisation reaction of a dicyanate ester monomer catalysed by cobalt(II) acetylacetonate and nonylphenol in air and argon atmospheres has been carried out by differential scanning calorimetry (DSC). Dynamic and isothermal DSC scans as well as the glass transition temperature are the experimental data obtained. From isothermal scans a higher cyanate conversion in air than in argon was obtained. The cyanate conversions are satisfactorily described with a second-order kinetic equation in the kinetically controlled region, and by m-order (m<1) equation after vitrification is reached. Activation energies determined by different procedures agree among them, showing slightly higher values in argon than in air.     

Copolycarbonates of isosorbide and various diols

Isosorbide and equimolar amounts of various diols were polycondensed with diphosgene and pyridine. Bisphenol A, 3,3′‐dimethyl bisphenol A, bisphenol C, 1,3‐bis(4‐hydroxybenzoyloxy)propane, and 1,4‐cyclohexane diol were used as comonomers. The compositions were determined by ¹H NMR spectroscopy; the random sequences were characterized by ¹³C NMR spectroscopy. For the high‐molar‐mass copolycarbonates of bisphenol A, 3,3′‐dimethyl bisphenol A, and bisphenol C, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry proved that the chain growth was mainly limited by cyclization. Copolycarbonates with alternating sequences were obtained by the polycondensation of bisphenol A with isosorbide bischloroformiate or from isosorbide and bisphenol A bischloroformiate. In these cases, large amounts of cyclic oligo‐ and polycarbonates were also formed. The glass‐transition temperatures were determined by differential scanning calorimetry measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3616–3628, 2006     

Oxidative copolymerization of indene with p‐tert‐butylstyrene: Synthesis,characterization, thermal analysis,and reactivity ratios

Copolyperoxides of indene and p‐tert‐butylstyrene of different compositions were synthesized by free‐radical‐initiated oxidative copolymerization. The compositions of the copolyperoxides, obtained from ¹H and ¹³C NMR spectra, were used to calculate the reactivity ratios of the monomers. The reactivity ratios indicated a larger proportion of indene units in random placement in the copolyperoxides. Thermal‐degradation studies by differential scanning calorimetry and electron‐impact mass spectrometry supported alternating peroxide units in the copolymer backbone. The activation energy for thermal degradation suggested that the degradation was dependent on the dissociation of the peroxide (? O? O? ) bonds in the backbone of the copolyperoxide chain. The flexibility of the copolyperoxides was examined in terms of the glass‐transition temperature. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 9–18, 2002     

Synthesis,photopolymerization, and adhesive properties of new bisphosphonic acid monomers for dental application

Four new monomers, 3‐(N‐methylacrylamido)propylidenebisphosphonic acid, 3‐(N‐propyl‐acrylamido)propylidenebisphosphonic acid, 3‐(N‐hexylacrylamido)propylidenebisphosphonic acid, and 3‐(N‐octylacrylamido)propylidenebisphosphonic acid, have been synthesized in good yields and fully characterized by ¹H, ¹³C, ³¹P NMR, and HRMS. The copolymerization of these monomers with N,N′‐diethyl‐1,3‐bis(acrylamido)propane (DEBAAP) has been investigated with differential scanning calorimetry. These mixtures show a higher reactivity than DEBAAP. New self‐etch dental primers, based on these acrylamide monomers, have been formulated. Dentin shear bond strength measurements have shown that primers based on these bisphosphonic acids assure a strong bond between the tooth substance and a dental composite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5258–5271, 2009     

Kinetic Study of Curing Bisphenol A Dicyanate Ester with Ionic Liquid Additive

A kinetic study of the trimerization reaction of bisphenol A dicyanate ester with an aromatic imidazolium‐based ionic liquid (IL) as additive is performed using dynamic and isothermal differential scanning calorimetry. The reaction follows second‐order autocatalytic kinetics, and a slight acceleration effect is observed in the presence of the aromatic IL relative to the neat resin. The activation energy also increases with the IL additive, whereas the glass transition temperature (T_g) is depressed, consistent with the Fox equation and a homogeneous one‐phase material. A model incorporating diffusion effects is able to describe the dynamic and isothermal curing data for both the neat resin system and that containing aromatic IL. A comparison with aliphatic‐based IL additive indicates that the reaction is more accelerated with aliphatic IL than with the aromatic IL in spite of the fact that the aliphatic additive phase separates during cure. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1315–1324