Ca_4GdO(BO_3)_3:Eu~(3 ),Sm~(3 )的发光及离子间的能量转移

Ca4 RO( BO3 ) 3 ( R=La,Ln,Y)三硼酸盐具有优良的非线性特征 . Khamaganova等[1] 以Pb O作助熔剂在合成 Ca4 Sm2 ( BO3 ) 4的过程中发现了一种新相 ,经过结构分析判定是一种新的化合物 .Norrestam等通过高温固相反应合成出此类三硼酸盐 .Iiykhuin[2 ] 对 Ca4 RO( BO3 ) 3( R=Lu,Tb,Gd)的结构进行了研究 .Dirkse等 [3 ]报道了 Ca4 Gd O( BO3 ) 3 粉末的发光特性 .1 996年 ,Aka[4 ] 采用提拉法 ( Czochralski)首次生长出较大尺寸的 Ca4 Gd O( BO3 ) 3 单晶 .孟宪林等 [5]报道了 Ca4 YO( BO3 ) 3 :Nd晶体的激光发射和自倍…     

N,N-二(对氟苄基)-N'-(2',3'-二脱氧-3'-硫代胞苷)甲脒水解反应的理论研究

采用密度泛函理论方法B3LYP/6-31++G(d,p)//B3LYP/6-31G(d,p)和导体极化连续模型B3LYP/CPCM/6-31++G(d,p)方法对苯环对位上有F取代的N,N-二(对氟苄基)-N′-(2′,3′-二脱氧-3′-硫代胞苷)甲脒(FBFA-3TC)水解反应机理和溶剂效应进行了研究. 考虑两条可能反应途径: 水分子首先进攻C=N双键的途径(Path A)和先进攻C-N单键的途径(Path B). 计算结果表明, 气相和水中两条途径的第一步都是速率控制步骤, Path A 比Path B 更有利. 对优势途径Path A的第二步反应的进一步研究发现, 中间体的羟基H原子转移到双键N比单键N更容易, 从而形成2′,3′-二脱氧-3′-硫代胞苷(3TC)的最终水解产物.     

乳液聚合法制备P(St/BA)-KAl(OH)2CO3纳米复合物

利用乳液聚合法制备了一种含KAl(OH)2CO3纳米粒子的聚苯乙烯／丙烯酸丁酯复合物．Zeta电位、粒径分布、扫描电镜(SEM)和透射电镜(TEM)等分析表明KAl(OH)2CO3粒子能够稳定地分散于苯丙乳液的乳胶粒中,形成核一壳结构．热失重(TG)分析表明KAl(OH)2CO3粒子的加入能提高复合物的热稳定性,使其在阻燃涂料领域有着潜在的应用前景．     

(Y,Gd)Al3(BO3)4∶Ce,Tb的光谱特性及稀土离子间的能量传递

采用高温固相反应合成了(Y,Gd)Al3(BO3)4中掺杂Ce3 和Tb3 的样品,并研究了其结构特性、光谱特性和发光过程中稀土离子间的能量传递.(Y,Gd)Al3(BO3)4属于三角晶系,具有R32的空间群,掺入Ce3 ,Tb3 杂质后晶格结构没有变化.(Y,Gd)Al3(BO3)4∶Ce,Tb的激发光谱由3个宽谱带组成,这3个谱带分别对应于Ce3 的4f-5d跃迁吸收.在该体系中存在Ce3 →Tb3 ,Gd 3 →Tb3 和Gd3 →Ce3 的能量传递,其中Ce3 起敏化剂和中间体的双重作用.     

Isotype Strukturen einiger Hexaamminmetall(II)-halogenide von 3d-Metallen: [V(NH3)6]I2, [Cr(NH3)6]I2, [Mn(NH3)6]Cl2, [Fe(NH3)6]Cl2, [Fe(NH3)6]Br2, [Co(NH3)6]Br2 und [Ni(NH3)6]Cl2

The Structures of some Hexaammine Metal(II) Halides of 3 d Metals: [V(NH₃)₆]I₂, [Cr(NH₃)₆]I₂, [Mn(NH₃)₆]Cl₂, [Fe(NH₃)₆]Cl₂, [Fe(NH₃)₆]Br₂, [Co(NH₃)₆]Br₂ and [Ni(NH₃)₆]Cl₂ Crystals of yellow [V(NH₃)₆]I₂ and green [Cr(NH₃)₆]I₂ were obtained by the reaction of VI₂ and CrI₂ with liquid ammonia at room temperature. Colourless crystals of [Mn(NH₃)₆]Cl₂ were obtained from Mn and NH₄Cl in supercritical ammonia. Colourless transparent crystals of [Fe(NH₃)₆]Cl₂ and [Fe(NH₃)₆]Br₂ were obtained by the reaction of FeCl₂ and FeBr₂ with supercritical ammonia at 400°C. Under the same conditions orange crystals of [Co(NH₃)₆]Br₂ were obtained from [Co₂(NH₂)₃(NH₃)₆]Br₃. Purple crystals of [Ni(NH₃)₆]Cl₂ were obtained by the reaction of NiCl₂ · 6H₂O and NH₄Cl with aqueous NH₃ solution. The structures of the isotypic compounds (Fm3 m, Z = 4) were determined from single crystal diffractometer data (see “Inhaltsübersicht”). All compounds crystallize in the K₂[PtCl₆] structure type. In these compounds the metal ions have high-spin configuration. The orientation of the dynamically disordered hydrogen atoms of the ammonia ligands is discussed.     

Dimethyl(methansulfinyl)sulfoniumhexafluorometallate (CH3)2SS(O)CH3+MF6− (M = As,Sb) und Kristallstruktur von Methansulfinylchlorid [1]

Dimethyl(methanesulfinyl)sulfonium Hexafluorometallates (CH₃)₂SS(O)CH₃⁺MF₆^? (M = As, Sb) and the Crystal Structure of Methanesulfinylchloride CH₃S(O)Cl [1] The preparation of dimethyl(methanesulfinyl)sulfoniumhexafluorometallates (CH₃)₂SS(O)CH₃⁺MF₆^? (M = As, Sb) and the spectroscopic characterization of the new thiosulfonium salts are described. Alternatively they can be obtained from methylmethanethiosulfinate by methylation. In addition the crystal structure of methanesulfinylchloride CH₃S(O)Cl at 113 K is reported. The compound crystallizes in the monoclinic space group P2₁/n with a = 528.2(1), b = 829.2(2), c = 880.9(2) pm, β = 90.48(2)° and Z = 4.     

A1掺杂量对正极材料LiNi_(1/3)Co_(2/3-x)A1_xO_2结构和电化学性能的影响

以共沉淀法合成的前驱体Ni_(1/3)Co_(2/3-x)Al_x(OH)_2与低共熔锂盐0.38LiOH·H_2O-0.62LiNO_3制备了锂离子电池正极材料LiNi_(1/3)Co_(2/3-x)Al_xO_2(x=1/12,1/3,1/2,7/12).采用X射线衍射(XRD)、扫描电镜(SEM)和电化学性能测试对其结构、形貌和电化学性质进行表征.结果表明,LiNi_(1/3)Co_(2/3-x)Al_xO_2在1/12≤x≤1/3范围内可以保持单一的六方层状a-NaFeO_2结构,当A1掺杂量(x)高于1/3时,会出现杂相.其中,LiNi_(1/3)Co_(1/3)Al_(1/3)O_2结晶程度最高,阳离子混排效应最小,并且颗粒小而均匀,振实密度可以达到2.88 g·cm~(-3),首次放电容量为151.5 mAh·g~(-1),循环50次后放电容量保持在91.4%,在1C和2C倍率下放电容量仍可达到133.7和120.9 mAh·g~(-1)     

Etude du Systeme LiPO3-Pr(PO3)3 Donnees sur LiPr(PO3)4

The LiPO₃-Pr(PO₃)₃ system was studied by micro-differential thermal analysis. The only new compound observed in the system was LiPr(PO₃)₄, melting incongruently at 1246 K. An eutectic appears at 926 K. Crystallographic data and powder diagram of the new compound are given. LiPr(PO₃)₄ crystallizes in the C2/c monoclinic system with unit cell: a=16.428(6), b=7.054(3), c=9.747(4) Å, β=126°31′(3), V=910.2 ų, Z=4. The IR and Raman spectra of this compound are given. This revised version was published online in July 2006 with corrections to the Cover Date.     

中性配合物Cr(acac)_3、mer-和fac-[Cr(bza)_3]的光学拆分

本文用新方法合成了Cr(bza)_3,改进了其mer-、fac-异构体的分离方法;增大了Cr(acac)_3的化学拆分量(1.5g)。试制了DBT(二苯甲酰-d-酒石酸)吸附型手性固定相(CSP),并成功地用于色谱拆分标题配合物的对映体,mer-[Cr(bza)_3]的部分拆分是首次发现的,其他配合物的拆分结果均优于文献方法。根据mer-[Cr(bza)_3)拆分流出液前、后组分的CD光谱,指定了其对映体绝对构型。还讨论了DBT吸附型CSP的拆分效能和色谱特性。     

La(NO3)3和Pr(NO3)3对高岭石脱羟基动力学的影响

采用热重和微商热重(TG/DTA)综合热分析技术在不同升温速率下研究了掺入La(NO₃)₃和Pr(NO₃)₃的高岭石的热分解过程, 利用Coats-Redfern积分法和Achar微分法对热分析实验数据进行动力学计算, 得到了高岭石脱羟基反应过程中的控制机理函数、 活化能和指前因子等动力学参数; 分析了2种稀土掺入对高岭石脱羟基过程动力学参数的影响, 并用Ozawa法对活化能进行了验证. 结果表明, 未掺稀土和掺入Pr(NO₃)₃的高岭石的脱羟基反应过程均受化学反应模型F₃控制, 反应的活化能分别为307.94和282.86 kJ/mol, 指前因子lnA的值分别为47.8980和44.1718; 掺入La(NO₃)₃的高岭石脱羟基反应过程控制机理函数发生改变, 受化学反应模型F₂控制, 反应活化能为196.02 kJ/mol, 指前因子lnA的值为29.5551. 与未掺稀土的高岭石对比, 掺入Pr(NO₃)₃后活化能和指前因子略有降低; 而掺入La(NO₃)₃后则显著降低, 分别降低了36.34%和38.30%. 采用Ozawa法验证得到的活化能与Coats-Redfern积分法和Achar微分法结果一致.     

A facile synthesis of novel unsymmetrical N-(4-oxo-2-phenyl-3(4H)-quinazolinoyl)-N-(aryl)acetamidines

<正>A series of novel unsymmetrical N-(4-oxo-2-phenyl-3(4H)-quinazolinoyl)-N-(aryl) acetamidines was synthesized by reacting ethyl(1H)-N-(4-oxo-2-phenylquinazolin-3(4H)-y1)ethanimidoate(2) and suitable reactive aromatic amines.Structures' determination of the synthesized compounds was carried out using spectroscopic techniques including IR,~1H NMR,and mass spectrometry. Structural effects on reactivity were also studied.     

Synthesis and Crystal Structure of (Z)-Ethyl 5-(phenylamino)-3-(phenylimino)-3H-1,2-dithiole-4-carboxylate

The compound (Z)-ethyl 5-(phenylamino)-3-(phenylimino)-3H-1,2-dithiole-4-carboxylate 3 has been synthesized by the reaction of ethylacetoacetate 1 and phenylisothiocyanate 2. Its structure has been established by ¹H NMR, ¹³C NMR, infrared, mass spectra, and x-ray crystallography.      

Die Hydrolyse des 1, 1, 3, 3-Tetrakis(dimethylamino)-1λ5, 3λ5-diphosphets

Hydrolysis of 1,1,3,3-Tetrakis(dimethylamino)-1λ⁵, 3λ⁵ -diphosphete Hydrolysis of 1,1,3,3-Tetrakis(dimethylamino)-1λ⁵, 3λ⁵ -diphosphet ( 2 ) yields in the first step Bis(dimethylamino)phosphorylmethyliden-methyl-bis(dimethylamino)phosphorane ( 5 ). In the second step Bis(dimethylamino)phosphoryl-methyl(dimethylamino)phosphosphonylmethylen ( 6 ) is the main product of hydrolysis. In addition small amounts of methylphosphonic-bis(dimethylamide) ( 7 ) are formed. Properties, nmr and mass spectra of 5 and 6 are described, their mechanism of formation is discussed.     

Synthesis,crystal structure,and catalytic properties of a copper(I) complex with 3H-(1,2,3)triazolo(4,5-b)pyridin-3-ol

[Cu(tpol)]_n based on the Htpol ligand [Htpol = 3H-(1,2,3)triazolo(4,5-b)pyridin-3-ol] had been synthesized and characterized using X-ray single crystal analysis, elemental analysis, powder X-ray diffraction and IR spectroscopy. Catalytic activity of [Cu(tpol)]_n was measured by the coupling reaction of trifluoroacetimidoyl chlorides with terminal alkyne. The crystal shows two different coordination types of [tpol]^? having a parallelogram of [Cu₂O₂] assembled in a trans geometry. With the change of functional groups of two types of reactants, [Cu(tpol)]_n can replace the noble catalysts and selectively catalyze the coupling of derivatives of 2,2,2-trifluoro-N-phenylacetimidoyl chloride and terminal alkynes, and 6-methoxy-2-(trifluoromethyl)quinoline.     

Fe(ClO_4)_3氧化合成聚乙撑二氧-三噻吩

分别以Fe(Cl O4)3、FeCl3、Fe2(SO4)3作为氧化剂,对3′,4′-乙撑二氧-2,2′∶5′,2″-三噻吩(TET)进行了化学氧化聚合,并研究了聚合条件对聚合物结构和电化学性能的影响。利用红外光谱、紫外光谱、X射线衍射对聚合物进行了表征,采用循环伏安、恒电流充放电等电化学方法研究了聚合物的电化学性能。结果表明:当TET与Fe(Cl O4)3的摩尔比为1∶4,反应温度为18℃,反应时间为12 h时,聚3′,4′-乙撑二氧-2,2′∶5′,2″-三噻吩(PTET)具有更好的共轭结构和电化学性能,导电率可达1.47 S/m,比电容可达133 F/g。     

Syntheses and Crystal Structures of Ca3Fe2(SeO3)6 and Sr3Fe2(SeO3)6

The new compounds M₃Fe₂(SeO₃)₆ (M = Ca, Sr) were obtained as crystalline precipitates from aqueous solutions of the respective ions, kept in Teflon-coated vessels at a temperature of 227(2)°C for several days. The crystal data are: space group R3 c, a = 8.531(2), 8.802(2) Å; c = 38.89(1), 39.00(1) Å; V = 2451.1, 2616.7 ų, Z = 6. The crystal structures have been refined by single-crystal X-ray diffraction methods to R1 = 0.021, 0.023; wR2 = 0.038, 0.039. The framework structure is built up by two types of FeO₆ octahedra as well as by MO₈ groups and SeO₃ trigonal pyramids by corner- and edge-linkage of the polyhedra.     

One-pot synthesis of 3-(2-cyanophenyl)quinazolin-4(3H)-one

Anthranilonitrile reacting with formic acid at room temperature for three days gave 64% of 3-(2-cyanophenyl)quinazolin-4(3H)-one. Under similar conditions anthranilic acid. 4-nitroaniline, and 2,5-dichloroaniline were N-formylated in good yields.Institute of Organic Chemistry and Technology, Silesian Technical University, Krzywoustego, 4, 44–100 Gliwice, Poland; e-mail: wojtex@zeus.polsl.gliwice.pl. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 922–924, July, 2000.     

喷雾热解法合成球形(Y,Gd)BO3:Eu荧光粉的研究

采用喷雾热解法合成了无团聚的球形(Y,Gd)BO3∶Eu荧光粉。研究了各因素对(Y,Gd)BO3∶Eu荧光粉体的结晶性能、外观形貌及发光强度的影响。结果表明,按120%硼酸的化学计量比于900℃喷雾热解,再经过1200℃后处理2 h,可以合成结晶良好的(Y,Gd)BO3∶Eu荧光粉体;喷雾热解溶液的浓度和载气流量对荧光粉的外观形貌影响较大;铕含量为10%时可以获得最佳的发光强度。在优化喷雾热解实验条件下成功合成出良好发光强度的PDP用(Y0.6Gd0.3)BO3∶Eu0.1荧光粉。     

(4R,5S)-5-羟基-4-甲基-3-己酮的合成

农业害虫药材甲Stegobium panicem Linnae在我国各省区都有分布,主要危害谷类、食品、药材、图书、档案等.我国一般每年可以发2～3代,温度较高的地区可发生4代[1] .     

3-(2-Quinolyl)- and 3-(5-carbethoxyfuryl-2)coumarins

3-(2-Quinolyl)- and 3-(5-carbethoxyfuryl-2)coumarins were prepared by reaction of substituted salicylaldehydes and hetarylacetonitriles. Alkylation and acylation of 3-hetaryl-7-hydroxycoumarins were studied. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 432–434, September–October, 2005.