Metallocene-catalyzed ethene/styrene co- and terpolymerization with olefinic termonomers

Ethene was co- and terpolymerized with 1-octene and styrene using the methylalumoxane (MAO) activated halfsandwich metallocene Me₂Si(Me₄Cp)(N-t.-butyl)TiCl₂(Cp = cyclopentadienyl, Me = methyl) as catalyst. At temperatures of 40 and 60°C styrene concentration was varied in order to investigate the influence of the comonomers. Despite decreasing the overall activity with respect to ethene/1-octene copolymerization, polymerization activity was found to exibit a relative maximum with increasing styrene concentration. An explanation is given taking two different comonomer effects into account. Low styrene concentration promoted higher 1-octene incorporation compared to ethene/1-octene copolymerization but significantly lowered the molecular weight of the terpolymers. With constant ethene and 1-octene concentration it was possible to produce ethene/1-octene/styrene terpolymers with styrene content varying from 0 to 25 mol % and 1-octene content varying from 8 to 21 mol %. All terpolymers were amorphous. With constant ethene content it was found possible to vary their glass transition temperature with 1-octene/styrene molar ratio incorporated in the terpolymer. ¹³C-NMR spectroscopic microstructure analysis showed that no styrene/1-octene sequences were found in the terpolymer backbone. Furthermore terpolymerizations were conducted successfully incorporating norbornene, 1,5-hexadiene and propene as monomers in terpolymertization with ethene and styrene. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2549–2560, 1997     

Syndiospecific polymerization of styrene with Cp*TiCl((OCH(R)CH2)2NAr)/MMAO

A series of titanium complexes Cp*TiCl((OCH(R)CH₂)₂NAr) (Cp* = C₅Me₅, R = H, Ar = Phenyl ( 2a) ; R = H, Ar = 2,6‐dimethylphenyl ( 2b ); R = Me, Ar = Phenyl ( 2c )) was prepared by the reaction of corresponding N,N‐diethoxylaniline derivatives, with Cp*TiCl₃ in the presence of excessive triethylamine. All the titanium complexes display higher catalytic activities towards the syndiospecific polymerization of styrene in the presence of modified methylaluminoxane (MMAO) as a cocatalyst, and produce higher molecular weight polystyrenes with higher syndiotacticity and melting temperature than their mother complex Cp*TiCl₃. The catalyst activities and polymer yields as well as polymer properties are considerably affected by the steric and electronic effect of the tridentate ligands. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1562–1568, 2005     

Half‐titanocene complexes bearing dianionic 6‐benzimidazolylpyridyl‐2‐carboximidate ligands: Synthesis,characterization, and their ethylene polymerization

6‐Benzimidazolylpyridyl‐2‐carboximidic half‐titanocene complexes, Cp′TiLCl (Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = 6‐benzimidazolylpyridine‐2‐carboxylimidic, C1–C13 ), were synthesized and characterized along with single‐crystal X‐ray diffraction. The half‐titanocene chlorides containing substituted cyclopentadienyl groups, especially pentamethylcyclopentadienyl groups were more stable, while those without substituents on the cyclopentadienyl groups were easily transformed into their dimeric oxo‐bridged complexes, (CpTiL)₂O ( C14 and C15 ). In the presence of excessive amounts of methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all half‐titanocene complexes showed high catalytic activities for ethylene polymerization. The substituents on the Cp groups affected the catalytic behaviors of the complexes significantly, with less substituents favoring increased activities and higher molecular weights of the resultant polyethylenes. Effects of reaction conditions on catalytic behaviors were systematically investigated with catalytic systems of mononuclear C1 and dimeric C14 . With C1 /MAO, large MAO amount significantly increases the catalytic activity, while the temperature only has a slight effect on the productivity. In the case of C14 /MAO catalytic system, temperature above 60 °C and Al/Ti value higher than 5000 were necessary to observe good catalytic activities. In both systems, higher reaction temperature and low cocatalyst amount gave the polyethylenes with higher molecular weights. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3396–3410, 2008     

Stereospecific styrene polymerization and ethylene–styrene copolymerization with titanocenes containing a pendant amine donor

A series of monocyclopentadienyl titanium complexes containing a pendant amine donor on a Cp group ( A = CpTiCl₃, B = Cp^NTiCl₃, C = Cp^NTiCl₂TEMPO, for Cp = C₅H₅, Cp^N = C₅H₄CH₂CH₂N(CH₃)₂, and TEMPO = 2,2,6,6‐tetramethylpiperidine‐N‐oxyl) are investigated for styrene homopolymerization and ethylene–styrene (ES) copolymerization. When activated by methylaluminoxane at 70 °C, complexes with the amine group ( B and C ) are active for styrene homopolymerization and afford syndiotactic polystyrene (sPS). The copolymerizations of ethylene and styrene with B and C yield high‐molecular weight ES copolymer, whereas complex A yields mixtures of sPS and polyethylene, revealing the critical role that the pendant amine has on the polymerization behavior of the complexes. Fractionation, NMR, and DSC analyses of the ES copolymers generated from B and C suggest that they contain sPS. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1579–1585, 2010     

Introduction of reactive functionality by the incorporation of divinylbiphenyl in ethylene copolymerization with styrene or 1‐hexene using aryloxo‐modified half‐titanocenes and MAO catalysts

An efficient introduction of vinyl group into poly (ethylene‐co‐styrene) or poly(ethylene‐co?1‐hexene) has been achieved by the incorporation of 3,3′‐divinylbiphenyl (DVBP) in terpolymerization of ethylene, styrene, or 1‐hexene with DVBP using aryloxo‐modified half‐titanocenes, Cp′TiCl₂(O?2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp*, ^tBuC₅H₄, 1,2,4‐Me₃C₅H₂], in the presence of MAO cocatalyst, affording high‐molecular‐weight polymers with unimodal distributions. Efficient comonomer incorporations have been achieved by these catalysts, and the content of each comonomer could be varied by its initial concentration charged. The postpolymerization of styrene was initiated from the vinyl group remained in the side chain by treatment with n‐BuLi. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2581–2587     

Olefin polymerization with Me4Cp–Amido complexes with electron‐withdrawing groups

A series of Me₄Cp–amido complexes {[η⁵:η¹‐(Me₄C₅)SiMe₂NR]TiCl₂; R = t‐Bu, 1 ; C₆H₅, 2 ; C₆F₅, 3 ; SO₂Ph, 4 ; or SO₂Me, 5 } were prepared and investigated for olefin polymerization in the presence of methylaluminoxane (MAO). X‐ray crystallography of complexes 3 and 4 revealed very long Ti N bonds relative to the bonds of 1 . These complexes were employed for ethylene–styrene copolymerizations, styrene homopolymerizations, and propylene homopolymerizations in the presence of MAO. The productivities of the catalysts derived from 3 – 5 were much lower than the productivity of the catalyst derived from 1 for the propylene polymerizations and ethylene–styrene copolymerizations, whereas the styrene polymerization activities were much higher for the catalysts derived from 3 – 5 than for the catalyst derived from 1 . The polymerization behavior of the catalysts derived from the metallocenes 3 – 5 were more reminiscent of monocyclopentadienyl titanocene Cp′TiX₃/MAO catalysts than of CpATiX₂/MAO catalysts such as 1 containing alkylamido ligands. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4649–4660, 2000     

Efficient ethylene/norbornene copolymerization by half‐titanocenes containing imidazolin‐2‐iminato ligands and MAO catalyst systems

Ethylene copolymerizations with norbornene (NBE) using half‐titanocenes containing imidazolin‐2‐iminato ligands, Cp′TiCl₂[1,3‐R₂(CHN)₂C?N] [Cp′ = Cp ( 1 ), ^tBuC₅H₄ ( 2 ); R = ^tBu ( a ), 2,6‐ⁱPr₂C₆H₃ ( b )], have been explored in the presence of methylaluminoxane (MAO) cocatalyst. Complex 1a exhibited remarkable catalytic activity with better NBE incorporation, affording high‐molecular‐weight copolymers with uniform molecular weight distributions, whereas the tert‐BuC₅H₄ analog ( 2a ) showed low activity, and the resultant polymer prepared by the Cp‐2,6‐diisopropylphenyl analog ( 1b ) possessed broad molecular weight distribution. The microstructure analysis of the poly(ethylene‐co‐NBE)s prepared by 1a suggests the formation of random copolymers including two and three NBE repeating units. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2575–2580     

Olefin polymerization by cyclopentadienyltris(dimethylamido)titanium(IV) complexes

Several titanium(IV) complexes of the type Cp′Ti(NMe₂)₃ [Cp′ = cyclopentadienyl ( 1 ), (dimethylaminoethyl)cyclopentadienyl ( 2 ), indenyl ( 3 ), and pentamethylcyclopentadienyl ( 4 )] were prepared, and their catalytic properties in the polymerization of α‐olefins were examined. Complexes 1 and 2 catalyzed the polymerization of ethylene in the presence of methylaluminoxane with a much higher activity than 3 or 4 . Complexes 3 and 4 polymerized ethylene with an activity similar to that of CpTiCl₃ ( 6 ). The preactivation of 2 , 3 , or 4 with trimethylaluminum (TMA) resulted in an increase in ethylene polymerization activities. Also, 1 and 2 were successfully used as ethylene/1‐hexene copolymerization catalysts, producing polymers with various amounts of 1‐hexene incorporation, depending on the amount of 1‐hexene in the feed mixture. Complex 1 likewise effectively polymerized styrene with a higher activity and higher syndiospecificity than the other three catalysts. Complexes 3 and 4 polymerized styrene with low syndiospecificity, whereas 2 produced only atactic polystyrene. The preactivation of 3 or 4 with TMA resulted in an increase in styrene polymerization activities and increased the syndiotacticity percentage of the polymers produced. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 313–319, 2001     

Imino‐indolate half‐titanocene chlorides: Synthesis and their ethylene (co‐)polymerization

A series of imino‐indolate half‐titanocene chlorides, Cp′Ti(L)Cl₂ ( C1 – C7 : Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = imino‐indolate ligand), were synthesized by the reaction of Cp′TiCl₃ with sodium imino‐indolates. All complexes were characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. Moreover, the molecular structures of two representative complexes C4 and C6 were confirmed by single crystal X‐ray diffraction analysis. On activation with methylaluminoxane (MAO), these complexes showed good catalytic activities for ethylene polymerization (up to 7.68 × 10⁶ g/mol(Ti)·h) and ethylene/1‐hexene copolymerization (up to 8.32 × 10⁶ g/mol(Ti)·h), producing polyolefins with high molecular weights (for polyethylene up to 1808 kg/mol, and for poly(ethylen‐co‐1‐hexene) up to 3290 kg/mol). Half‐titanocenes containing ligands with alkyl substituents showed higher catalytic activities, whereas the half‐titanocenes bearing methyl substituents on the cyclopentadienyl groups showed lower productivities, but produced polymers with higher molecular weights. Moreover, the copolymerization of ethylene and methyl 10‐undecenoate was demonstrated using the C1 /MAO catalytic system. The functionalized polyolefins obtained contained about 1 mol % of methyl 10‐undecenoate units and were fully characterized by several techniques such as FT‐IR, ¹H NMR, ¹³C NMR, DSC, TGA and GPC analyses. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 357–372, 2009     

Factors affecting product distributions in ethylene/styrene copolymerization by (aryloxo)(cyclopentadienyl)titanium complexes‐MAO catalyst systems

Ethylene/styrene copolymerizations using Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp* (C₅Me₅, 1 ), 1,2,4‐Me₃C₅H₂ ( 2 ), tert‐BuC₅H₄ ( 3 )]‐MAO catalyst systems were explored under various conditions. Complexes 2 and 3 exhibited both high catalytic activities (activity: 504–6810 kg‐polymer/mol‐Ti h) and efficient styrene incorporations at 25, 40°C (ethylene 6 atm), affording relatively high molecular weight poly (ethylene‐co‐styrene)s with unimodal molecular weight distributions as well as with uniform styrene distributions (M_w = 6.12–13.6 × 10⁴, M_w/M_n = 1.50–1.71, styrene 31.7–51.9 mol %). By‐productions of syndiotactic polystyrene (SPS) were observed, when the copolymerizations by 1 – 3 ‐MAO catalyst systems were performed at 55, 70 °C (ethylene 6 atm, SPS 9.0–68.9 wt %); the ratios of the copolymer/SPS were affected by the polymerization temperature, the [styrene]/[ethylene] feed molar ratios in the reaction mixture, and by both the cyclopentadienyl fragment (Cp′) and anionic ancillary donor ligand (L) in Cp′TiCl₂(L) (L = Cl, O‐2,6‐ⁱPr₂C₆H₃ or N=C^tBu₂) employed. Co‐presence of the catalytically‐active species for both the copolymerization and the homopolymerization was thus suggested even in the presence of ethylene; the ratios were influenced by various factors (catalyst precursors, temperature, styrene/ethylene feed molar ratio, etc.). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4162–4174, 2008     

α‐olefin homopolymerization and ethylene/1‐hexene copolymerization catalysed by novel ansa‐group IV complexes/MAO system

The catalytic properties of a set of ansa‐complexes (R‐Ph)₂C(Cp)(Ind)MCl₂ [R = ^tBu, M = Ti ( 3 ), Zr ( 4 ) or Hf ( 5 ); R = MeO, M = Zr ( 6 ), Hf ( 7 )] in α‐olefin homopolymerization and ethylene/1‐hexene copolymerization were explored in the presence of MAO (methylaluminoxane). Complex 4 with steric bulk ^tBu group on phenyl exhibited remarkable catalytic activity for ethylene polymerization. It was 1.6‐fold more active than complex 11 [Ph₂C(Cp)(Ind)ZrCl₂] at 11 atm ethylene pressure and was 4.8‐fold more active at 1 atm pressure. The introduction of bulk substituent ^tBu into phenyl groups not only increased the catalytic activity greatly but also enhanced the content of 1‐hexene in ethylene/1‐hexene copolymerization. The highest 1‐hexene incorporation was 25.4%. In addition, 4 was also active for propylene and 1‐hexene homopolymerization, respectively, and low isotactic polypropylene (mmmm = 11.3%) and isotactic polyhexene (mmmm = 31.6%) were obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

Catalytic systems Me2SiCp*NtBuMX2/(CPh3)(B(C6F5)4) (MTi,XCH3, MZr,XiBu) in copolymerization of ethylene with styrene

Catalytic activity of Me₂SiCp*N^tBuMX₂/(CPh₃)(B(C₆F₅)₄) [MTi, XCH₃ (1); MZr, X=ⁱBu (2)] systems in the ethylene/styrene (E/S) feed was examined. Experimental data revealed high activity for the catalytic system (1) for copolymerization ethylene with styrene, whereas the system with enhanced catalytic activity for ethylene homopolymerization (2) was temporarily blocked in the styrene presence yielding, even at high styrene content, homopolyethylene as the final product. Properties of thus obtained polymers were analyzed. Catalytic system (1) occurred very sensitive to S/E ratio in the comonomers feed. The 10‐fold acceleration for ethylene consumption was shown in two experimental sets conducted at S/E = 1.3 ratio, 1 bar, and 7.5 bar ethylene pressure, respectively. The consequent enhancement in S/E ratio resulted in slowing down both ethylene consumption and catalyst deactivation rates. Atactic polystyrene was formed at high styrene content with the catalyst (1). Catalytic system (1) allowed design of products with the highest styrene content (20 mol %) at low ethylene pressure, moderate temperature, and high S/E ratio. The apparent activation energy estimated from the initial rates of ethylene consumption was 54.6 kJ/mol. Analysis of apparent reactivity factors (r_E = 9 and r_S = 0.04; r_E × r_S = 0.4) and ¹³C‐NMR copolymer spectra revealed an alternating tendency of the comonomers for active center incorporation. DSC measurements showed considerable decrease of melting points and crystallinity even for copolymers with low styrene content. The catalyst produced relatively high–molecular weight copolymers (140–150 kg/mol) even at 80°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1083–1093, 1999     

Borohydrido rare earth based coordinative chain transfer copolymerization: A convenient tool for tuning the microstructure of isoprene/styrene copolymers

A series of lanthanum and neodymium borohydrido complexes comprising the trisborohydrides Nd(BH₄)₃(THF)₃ ( 1a ) and La(BH₄)₃(THF)₃ ( 1b ) and the half‐lanthanidocenes Cp*Nd(BH₄)₂(THF)₂ ( 2a ) (Cp* = C₅Me₅) and Cp*La(BH₄)₂(THF)₂ ( 2b ) has been assessed for the chain transfer copolymerization of isoprene and styrene. A transmetalation process is occurring efficiently with the borohydride complexes in the presence of magnesium dialkyl. The transmetalation is accompanied by (i) a gradual decrease of the 1,4‐trans stereoselectivity of the reaction at the benefit of 3,4‐selectivity and (ii) an increase in the quantity of styrene inserted in the copolymer. This can be at least partially attributed to a magnesium induced co‐oligomerization of isoprene and styrene. By combining dialkylmagnesium and trialkylaluminum, a 1,4‐trans stereospecific reversible coordinative chain transfer copolymerization of isoprene and styrene is observed when the half‐lanthanocene 2b is used as precatalyst. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Styrene polymerization with nickel complexes/methylaluminoxane catalytic system

Polymerization of styrene using β‐diketiminate nickel (II) bromide complexes CH{C(R)NAr}₂NiBr (R = CH₃, Ar = 2,6‐ⁱPr₂C₆H₃, 1 ; R = CH₃, Ar = 2,6‐Me₂C₆H₃, 2 ; R = CF₃, Ar = 2,6‐ⁱPr₂C₆H₃, 3 ; R = CF₃, Ar = 2,6‐Me₂C₆H₃, 4 ) in the presence of methylaluminoxane was studied. Compound 3 is the most active styrene polymerization catalyst of all the nickel complexes tested. The activity of these catalysts increases with increases in steric bulk of the substituents on the aryl rings. The electronic nature of the ligand backbone also affects the activity. Weight‐average molecular weight of the prepared polystyrene ranges from 21 000 to 72 000, with polydispersity indexes of 1.95–2.78. The microstructure of the obtained products is atactic polystyrenes from NMR analyses. Copyright © 2008 John Wiley & Sons, Ltd.     

Novel catalyst compositions for the syndiospecific polymerization of styrene prepared by the combination of cyclopentadenyl complexes of group IIA or group IIIA elements with titanium alkoxides

A highly reactive catalyst system, which induces the syndiospecific polymerization of styrene with high activity, has been found by the combination of cyclopentadienyl (Cp) complexes of group IIA or group IIIA elements with titanium alkoxides. The ¹H NMR monitoring of these reactions reveals the occurrence of a novel Cp‐transfer reaction that leads to the generation of Cp‐containing titanium complexes as catalysts for promoting the syndiospecific polymerization of styrene. Detailed in situ ¹H NMR studies reveal that the rate of the Cp‐transfer reaction is highly dependent on the steric bulkiness of the titanium alkoxide complexes, the structures of the Cp complexes of group IIA or group IIIA elements, and the polymerization temperature. Styrene polymerization studies also reveal that a more effective Cp‐transfer reaction can typically lead to the generation of a more highly reactive catalyst for sPS polymerization. This study provides a convenient method for the in situ generation of variable structures of Cp/titanium alkoxide complexes, which are difficult to synthesize by other methods. Most importantly, the mixture of a catalyst precursor can be directly used as an sPS polymerization catalyst without isolation and purification of Cp/titanium complexes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2304–2315, 2005     

Copolymerization of ethylene with styrene catalyzed by a linked bis(phenolato) titanium catalyst

Copolymerization of ethylene with styrene, catalyzed by 1,4‐dithiabutanediyl‐linked bis(phenolato) titanium complex and methylaluminoxane, produced exclusively ethylene–styrene copolymers with high activity. Copolymerization parameters were calculated to be r_E = 1.2 for ethylene and r_S = 0.031 for styrene, with r_E r_S = 0.037 indicating preference for alternating copolymerization. The copolymer microstructure can be varied by changing the ratio between the monomers in the copolymerization feed, affording copolymers with styrene content up to 68%. The copolymer microstructure was fully elucidated by ¹³C NMR spectroscopy revealing, in the copolymers with styrene content higher than 50%, the presence of long styrene–styrene homosequences, occasionally interrupted by isolated ethylene units. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1908–1913, 2006     

Efficient terpolymerization of ethylene and styrene with α‐olefins by aryloxo‐modified half‐titanocene‐based catalysts and cocatalyst systems

Aryloxo‐modified half‐titanocenes, Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp* ( 1 ), ^tBuC₅H₄ ( 2 )], catalyze terpolymerization of ethylene and styrene with α‐olefin (1‐hexene and 1‐decene) efficiently in the presence of cocatalyst, affording high‐molecular‐weight polymers with unimodal distributions (compositions). Efficient comonomer incorporations have been achieved by these catalysts. The content of each comonomer (α‐olefin, styrene, etc.) could be controlled by varying the comonomer concentration charged, and resonances ascribed to styrene and α‐olefin repeated insertion were negligible. The terpolymerization with p‐methylstyrene (p‐MS) in place of styrene also proceeded in the presence of [PhN(H)Me₂][B(C₆F₅)₄] and AlⁱBu₃ cocatalyst, and p‐MS was incorporated in an efficient matter, affording high‐molecular‐weight polymers with uniform molecular weight distributions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2565–2574     

N‐(2‐benzimidazolylquinolin‐8‐yl)benzamidate half‐titanocene chlorides: Synthesis,characterization and their catalytic behavior toward ethylene polymerization

A series of N‐(2‐benzimidazolyquinolin‐8‐yl)benzamidate half‐titanocene chlorides, Cp′TiLCl ( C1 – C8 : Cp′ = C₅H₅, MeC₅H₄, or C₅Me₅; L = N‐(benzimidazolyquinolin‐8‐yl)benzamides)), was synthesized by the KCl elimination reaction of half‐titanocene trichlorides with the correspondent potassium N‐(2‐benzimidazolyquinolin‐8‐yl)benzamide. These half‐titanocene complexes were fully characterized by elemental and NMR analyses, and the molecular structures of complexes C2 and C8 were determined by the single‐crystal X‐ray diffraction. The high stability of the pentamethylcyclopentadienyl complex ( C8 ) was evident by no decomposing nature of its solution in air for one week. The oxo‐bridged dimeric complex ( C9 ) was isolated from the solution of the corresponding cyclopentadienyl complex ( C3 ) solution in air. Complexes C1 – C8 exhibited good to high catalytic activities toward ethylene polymerization and ethylene/α‐olefin copolymerization in the presence of methylaluminoxane (MAO) cocatalyst. In the typical catalytic system of C1/ MAO, the polymerization productivities were enhanced with either elevating reaction temperature or increasing the ratio of MAO to titanium precursor. In general, it was observed that higher the catalytic activity of the catalytic system lower the molecular weight of polyethylene. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3154–3169, 2009     

Ligand Effect on the Stability of Water-Soluble Iridium Catalysts for High-Pressure Hydrogen Gas Production by Dehydrogenation of Formic Acid

Aiming to develop a highly effective and durable catalyst for high-pressure H₂ production from dehydrogenation of formic acid (DFA), the ligand effect on the catalytic activity and stability of Cp*Ir (Cp*:pentamethylcyclopentadienyl anion) complexes were investigated using 5 different kinds of N,N’-bidentate ligands (bipyridine, biimidazoline, pyridyl-imidazoline, pyridyl-pyrazole and picolinamide). The Ir complex with biimidazoline ligand exhibited the highest catalytic activity, but deactivation occurred readily at high pressure. The pyridine moiety in the ligand can enhance the stability of Ir complex catalysts for the high-pressure reaction. The Ir complex catalyst containing pyridyl-imidazoline ligand showed the high activity and best stability under the high-pressure conditions.     

Efficient introduction of aromatic vinyl group by incorporation of divinylbiphenyl,p‐divinylbenzene in syndiospecific styrene polymerization using aryloxo‐modified half‐titanocene catalysts

An efficient introduction of aromatic vinyl group into syndiotactic polystyrene has been achieved by incorporation of 3,3′‐divinylbiphenyl, p‐divinylbenzene (DVB) in syndiospecific styrene polymerization using aryloxo‐modified half‐titanocenes, Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) (Cp′ = ^tBuC₅H₄, 1,2,4‐Me₃C₅H₂), in the presence of MAO. The resultant polymers possessed high molecular weights with uniform molecular weight distributions, and the DVB contents could be varied by the initial feed molar ratios (6–23 mol %) without decrease in the M_n values. The syndiotactic stereo‐regularity and presence of the vinyl groups were confirmed by NMR spectra. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1902–1907