Preparations and properties of uniform size macroporous polymer beads prepared by two-step swelling and polymerization method utilizing divinyl succinate or divinyl adipate as a crosslinking agent

Uniform size macroporous polymer beads were prepared through a typical two-step swelling and polymerization method utilizing divinyl succinate or divinyl adipate as well as ethylene dimethacrylate as crosslinking agents. Stable macroporous polymer beads with good size monodispersity and a slightly nonspherical shape were obtained by homopolymerization of divinyl succinate in cyclohexanol as porogen. BET measurements indicated that the beads prepared by homopolymerization of divinyl succinate and copolymerization of divinyl succinate with vinyl p-tert-butylbenzoate, as well as homopolymerization of ethylene dimethacrylate had relatively large specific surface area. In contrast, copolymerization of divinyl succinate with methyl methacrylate afforded beads having a very small specific surface area. Similarly, all the beads prepared using divinyl adipate had very small specific surface area, while size exclusion chromatography in tetrahydrofuran suggested that these beads acquired a porous structure as a result of swelling. When used as packing materials for high-performance liquid chromatography, the beads prepared with divinyl adipate showed unexpected molecular recognition toward flat solutes in reversed phase liquid chromatography in contrast to those prepared with ethylene dimethacrylate. Copolymerizations with methyl methacrylate led to a decrease in molecular recognition, while those with vinyl p-tert-butylbenzoate enhanced the selectivity. © 1996 John Wiley & Sons, Inc.     

Preparation and functionalization of reactive monodisperse macroporous poly(chloromethylstyrene-co-styrene-co-divinylbenzene) beads by a staged templated suspension polymerization

Reactive monodisperse porous poly(chloromethylstyrene-co-styrene-co-divinylbenzene) beads have been prepared by a staged templated suspension polymerization method with different concentrations of linear polystyrene porogen and chloromethylstyrene in the polymerization mixture. The presence of a small amount of linear polystyrene in the polymerization mixture leads to a dramatic increase in both the pore size and the pore volume of the resulting beads. In contrast, addition of chloromethylstyrene leads to lower surface areas and smoother surfaces due to the reduced compatibility between the polystyrene porogen and the newly formed crosslinked chains. The modification of chloromethylstyrene beads by Gabriel synthesis to obtain aminated beads has also been studied. The final number of primary amino groups is related to the starting concentration of functional benzyl chloride moieties rather than to the porous properties. Both π-basic and π-acidic type chiral selectors, (R)-1-(1-naphthyl)-ethylamine and (R)-N-(3,5-dinitrobenzoyl)phenylglycine, respectively, have been attached to the amino functionalized beads, and the resulting chiral beads have been used in the model HPLC separations of enantiomers. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2631–2643 1997     

Preparation of highly selective stationary phases for high-performance liquid chromatographic separation of enantiomers by direct copolymerization of monomers with single or twin chiral ligands

Uniformly sized macroporous polymer beads, which can be used as chiral stationary phase (CSP), have been prepared by the staged templated suspension polymerization process using chiral monomer as one of the copolymerization components. This approach enables the preparation of CSPs for which properties such as pore size, pore volume, surface area, chemistry, and chiral ligands can be tuned over a broad range. Several types of well-defined chiral monomers were prepared and allowed to assess synergistic effect of multiple selectors attached to a branched linker as well as the effect of the length and chemistry of the linker. Microscale batch screening was used for simple and rapid evaluation of selectivity. The most promising candidate CSPs were prepared on a larger scale and packed into HPLC columns. Their performance was demonstrated on the separation of racemic N-(3,5-dinitrobenzoyl)-alpha-amino acid alkylamides. The highest separation factors alpha of up to 27 were observed for CSPs prepared from monomers containing the branched spacer. These highly selective CSPs also enabled the separation of larger amounts of the target racemates upon column overload conditions.     

Functionalized polymer particles for chiral separation

The synthetic chiral polymer poly(N-acryloyl-S-phenylalanine ethyl ester) was immobilized by grafting to macroporous polymer particles of various composition and structure in a process involving copolymerization of the chiral monomer with residual double bonds present in the macroporous support particles. The support particles were prepared by suspension or micro- suspension polymerization of trimethylolpropane trimethacrylate (TRIM), divinylbenzene or by copolymerization of styrene and TRIM. The maximum amount of immobilized chiral polymer and the mechanical properties of the resulting materials varied with the swelling capacity of the parent support particles. Up to 60% (w/w) of chiral polymer could be immobilized to the pore system of highly cross-linked TRIM particles. The enantioselectivity of the chiral stationary phases increased with increase in the amount of immobilized chiral polymer. The results of studies of porosity and particle size variation during grafting form the basis for a discussion of the structure of the final materials.     

Preparation and evaluation of uniform-size (-)-ephedrine-imprinted polymeric microspheres by multi-step swelling and suspension polymerization.

Ephedrine-imprinted polymeric microspheres have been prepared in an aqueous system by multi-step swelling and suspension polymerization, using methacrylic acid (MAA) as a functional monomer, and ethylene glycol dimethacrylate (EGDMA) as a cross-linker. Scanning electron microscopy (SEM) was used as a means to identify the structure features of the obtained polymers. Further, we examined the recognition mechanism of the polymers and the influences of some chromatographic conditions, such as the mobile-phase composition, flow-rate, column temperature and sample amount on the retentivity and selectivity for (-)-ephedrine and (+)-ephedrine. The results reveal that stable macroporous polymer beads with good size monodispersity were obtained, the average size of which was 3-5 microm. Baseline chiral separation of the template isomers was achieved on a short column (50 mmx4.6 mm i.d.) when the prepared polymer beads were used as a stationary phase, while the non-imprinted polymers (NIPs) did not show such ability. The optimized chromatographic condition was as follows: acetonitrile-acetic acid (99.8/0.2, v/v) as the mobile phase; sample amount, 40-80 microg; flow rate, 1.0 ml min-1; and column temperature, room temperature, respectively. It is assumed that two classes of binding sites exist in the porous polymers, one being hydrophilic binding sites, the other being hydrophobic binding sites.     

键合纤维素(4-甲基苯甲酸酯)手性固定相的制备及其手性拆分

采用包夹聚合法,将硅小球同硅烷化试剂反应制得乙烯基硅胶,然后将该乙烯基硅胶同经十一烯酰氯、4-甲基苯甲酰氯衍生的纤维素共聚,制备出含不同官能团的聚合物包夹硅基的键合型纤维素(4-甲基苯甲酸酯)类手性固定相。分别以正己烷异丙醇、正己烷四氢呋喃为流动相,对此键合型手性固定相的手性识别能力进行了评价。为了与同类型的涂敷型纤维素(4-甲基苯甲酸酯)手性固定相作比较,合成了涂敷型纤维素(4-甲基苯甲酸酯)手性固定相。结果表明,键合型纤维素(4-甲基苯甲酸酯)手性固定相具有一定的手性识别能力,可以拆分所研究的6种手性化合物中的4种。     

A novel lipase-based stationary phase in liquid chromatography

In this paper, a new chiral stationary phase (CSP) based on Candida antarctica lipase B (CALB) bounding to the surface of macroporous silica gel was developed and its stereoselectivity in enantioseparation and asymmetrical hydrolysis was evaluated. Three CALB-based HPLC columns with different amounts of enzyme immobilized were prepared by employing the immobilization method, namely “in batch”. In this technique two chromatographic supports epoxy silica and aminopropyl silica were considered. This novel CSP was proven capable of hydrolyzing chiral esters asymmetrically as bioreactor and separating several aromatic alcohols and diniconazole enantiomers.     

Separation study of organic bases on new polymeric stationary phases under basic conditions

Crosslinked monodisperse polymer microparticles have been synthesized and evaluated as stationary phases for the separation of basic drug molecules in reversed-phase high performance liquid chromatography. The polymer beads were prepared by free-radical copolymerization of divinylbenzene and styrene or vinylbenzyl chloride in acetonitrile with toluene as porogen agent using the precipitation method. Their efficiency as stationary phase was investigated at both acid (5.6) and basic (12) pH, and the results compared with those of a commercial polymeric reversed-phase column. Separation of the organic bases was achieved with the chlorobenzyl particles at pH 12.     

Synthesis of a novel methacrylic monomer iniferter and its application in surface photografting on crosslinked polymer substrates

(Methacryloyl ethylenedioxycarbonyl) benzyl N,N‐diethyldithiocarbamate (HEMA‐E‐In) was synthesized and used as a monomer iniferter to develop a novel, photopatternable grafting technology. This molecule functions as both a methacrylic monomer and a photoiniferter (photoinitiator–transfer agent–terminator). The structure of HEMA‐E‐In was characterized by ¹H NMR, Fourier transform infrared, and ultraviolet–visible spectroscopies. In the presence of the monomer iniferter, methyl methacrylate was polymerized by exposure to 365‐nm ultraviolet radiation, confirming the initiation capability of HEMA‐E‐In. After the copolymerization of HEMA‐E‐In into a methacrylate‐based polymer, attenuated total reflectance Fourier transform infrared spectra revealed that the photoiniferter functionality was present at the surface of this polymeric substrate. Photografting of poly(ethylene glycol) monomethacrylate monomer from the surface caused a significant change in the hydrophobicity of the surface as demonstrated by contact angle measurements. The novel monomer photoiniferter HEMA‐E‐In initiates the polymerization of bulk monomer and provides a reactive functionality that facilitates further initiation and polymer modification by the polymerization of different monomers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1885–1891, 2002     

Preparation of macroporous functionalized polymer beads by a multistep polymerization and their application in zirconocene catalysts for ethylene polymerization

Macroporous functionalized polymer beads of poly(4‐vinylpyridine‐co‐1,4‐divinylbenzene) [P(VPy‐co‐DVB)] were prepared by a multistep polymerization, including a polystyrene (PS) shape template by emulsifier‐free emulsion polymerization, linear PS seeds by staged template suspension polymerization, and macroporous functionalized polymer beads of P(VPy‐co‐DVB) by multistep seeded polymerization. The polymer beads, having a cellular texture, were made of many small, spherical particles. The bead size was 10–50 μm, and the pore size was 0.1–1.5 μm. The polymer beads were used as supports for zirconocene catalysts in ethylene polymerization. They were very different from traditional polymer supports. The polymer beads could be exfoliated to yield many spherical particles dispersed in the resulting polyethylene particles during ethylene polymerization. The influence of the polymer beads on the catalytic behavior of the supported catalyst and morphology of the resulting polyethylene was investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 873–880, 2003     

Preparation of silica microspheres with a broad pore size distribution and their use as the support for a coated cellulose derivative chiral stationary phase

A templating strategy using crosslinked and functionalized polymeric beads to synthesize silica microspheres with a broad pore size distribution has been developed. The polymer/silica hybrid microspheres were prepared by utilizing the combination of a templating weak cation exchange resin, a structure‐directing agent N‐trimethoxysilylpropyl‐N,N,N‐trimethylammonium chloride, and a silica precursor tetraethyl orthosilicate. The silica microspheres were then obtained after calcinating the hybrid microspheres. The as‐prepared materials were characterized by scanning electron microscopy, mercury intrusion porosimeter, and thermal gravimetric analysis. The results showed that the starting templating beads were about 5 μm in diameter and the formed silica microspheres were less than 3 μm with a pore size range of 10–150 nm, some pores were even extended to beyond 250 nm. It was demonstrated that cellulose tris(3,5‐dimethylphenylcarbamate) was readily coated onto the surface of the as‐synthesized silica microspheres without any additional surface pretreatment. The coated silica microspheres were uniformly dispersed even with high loading of the chiral stationary phase, which exhibited high resolution chiral separations in high‐performance liquid chromatography.     

Lignin‐based polymers via graft copolymerization

Lignin is an important source of synthetic materials because of its abundance in nature, low cost, stable supply, and no competition to the human food supply. Lignin, a cross‐linked phenolic polymer, contains a large number of aromatic groups that can be used as a substitute for petroleum‐based aromatic fine chemicals. However, modification of lignin is necessary for its application in advanced materials due to its chemically inert nature and structural complexity. Polymeric modification of lignin via graft copolymerization represents an important avenue for modification because this method forms stable covalent bond linkages between lignin and synthetic functional polymers. In this review, we discuss recent synthetic strategies toward polymeric modification of lignin using graft copolymerization and the special properties and applications of the produced lignin copolymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3515–3528     

Preparation and polymerization of thyroxine methacrylate monomers

Thyroxine methyl ester amides of mono-, di-, and tri-glycyl methacrylates have been prepared. Water-soluble polymers formed from thyroxine methacrylate monomers by free-radical copolymerization with acrylamide had molecular weights of (2–4) × 10⁴ (by viscometry). A fluorescent polymer was prepared by copolymerization with a fluorescein methacrylate monomer. Similarly, a polymeric thyroxine material was prepared with amine functionality by copolymerization with N-3-aminopropylmethacrylamide. These polymers may have interesting biological and immunochemical properties.     

表层二氧化锆/硅基－CDMPC手性固定相的制备及联苯双酯类保肝药的直接拆分

用分子自组装的方法制备了表层纳米氧化锆包覆多孔微米硅球，得到的氧化锆 /硅胶微球用作高效液相色谱担体，本方法制备的担体具有氧化锆的表面特性并保 持了硅胶的颗粒均匀、表面积大、渗透性好的优点，可以制备大涂敷量的手性固定 相，以增加固定相的手性识别能力，以涂敷量为20%的纤维素－三（3，5-二甲基苯 基氨基甲酸酯）－氧化锆/硅胶手性固定相（CDMPC-coated ZrO_2/SiO_2）上，对 联苯双酯类保肝药物进行直接拆分，考察了流动相极性、第二种极性改性剂对样品 保留和拆分的影响；并对手性拆分机理进行了阐述，结果表明：CDMPC- ZrO_2/SiO_2手性固定相比CDMPC-ZrO_2具有更好的手性拆分能力。     

Polymeric stationary phase,based on (R,R)‐tartramide and bisphenol S,with potential chiral properties

A new polymeric stationary phase with potential chiral properties, obtained by the chemical modification of the parent copolymer of dimethacrylate esters of bisphenol S and divinylbenzene, is presented. Hydroxyl functional groups present in the copolymer chemical structure are blocked by optically active selectors of (R,R)‐tartramide derivatives. The influence of the chemical modification of the parent copolymer on its porous structure has been studied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2566–2574, 2004     

Polymeric catalysts for chemo- and enantioselective epoxidation of olefins: New crosslinked chiral transition metal complexing polymers

Polymeric analogs of well-known chiral Mn(III)-salen complexes were synthesized and were used as recyclable catalysts for asymmetric epoxidation of olefins. For this purpose two different monomers, 2 and 3 , bearing chiral Mn(III)-salen moieties were synthesized. The monomer 3 carries a bulky substituent closer to the Schiff base moiety, while monomer 2 lacks such a substituent. These metal complexed chiral monomers were subsequently copolymerized with ethylene glycol dimethacrylate producing insoluble crosslinked functional matrices that possess macroporous morphology. Chemo- and enantioselective catalytic activities of these two polymers were evaluated for epoxidation of olefins. Both polymers catalyzed the epoxidation of a variety of olefins at room temperature in the presence of iodosylbenzene (PhIO) as the terminal oxidant with yields comparable to the homogenous system. In terms of their enantioselective catalytic activity, polymer P-2 (obtained from 3 ) performed better than polymer P-1 (obtained from 2 ). Unfortunately, while the homogeneous systems are reported to offer over 80% enantioselectivity, with the present polymeric catalysts, enantioselectivity to a maximum of 30% were observed. Unlike the homogeneous system, use of an external nitrogenous donor played a very insignificant role in influencing enantioselectivity. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1809–1818, 1997     

OJ手性柱分离芳基烷酸类非甾体解热镇痛药的色谱保留特性和拆分机理

使用纤维素类手性柱OJ柱, 分离布洛芬、依托度酸、非诺洛芬钙、酮洛芬、洛索洛芬等5个芳基烷酸类非甾体解热镇痛药对映体, 并通过溶质计量置换保留模型和热力学研究对OJ手性柱手性分离机理进行探讨. 结果表明, OJ手性柱可在正相条件下分离系列芳基烷酸类非甾体解热镇痛药, 对映体的色谱保留和分离度可以通过改变流动相中醇类置换剂和浓度、有机酸性改性剂和浓度、柱温等因素调节.     

Synthesis of polypropylene graft copolymers by the combination of a polypropylene copolymer containing pendant vinylbenzene groups and atom transfer radical polymerization

This article discusses a facile and inexpensive reaction process for preparing polypropylene‐based graft copolymers containing an isotactic polypropylene (i‐PP) main chain and several functional polymer side chains. The chemistry involves an i‐PP polymer precursor containing several pendant vinylbenzene groups, which is prepared through the Ziegler–Natta copolymerization of propylene and 1,4‐divinylbenzene mediated by an isospecific MgCl₂‐supported TiCl₄ catalyst. The selective monoenchainment of 1,4‐divinylbenzene comonomers results in pendant vinylbenzene groups quantitatively transformed into benzyl halides by hydrochlorination. In the presence of CuCl/pentamethyldiethylenetriamine, the in situ formed, multifunctional, polymeric atom transfer radical polymerization initiators carry out graft‐from polymerization through controlled radical polymerization. Some i‐PP‐based graft copolymers, including poly(propylene‐g‐methyl methacrylate) and poly(propylene‐g‐styrene), have been prepared with controlled compositions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 429–437, 2005     

Chiral separation of amino acids by ligand-exchange capillary electrochromatography using continuous beds

A chiral ligand-exchange phase for capillary electrochromatography based on continuous bed technology was developed. The chiral stationary phase is prepared by a one-step in situ copolymerization procedure using methacrylamide, piperazine diacrylamide, vinylsulfonic acid and N-(2-hydroxy-3-allyloxypropyl)-L-4-hydroxyproline. These chiral continuous beds are inexpensive and easy to prepare. They also have several advantages over silica-based packed capillaries. Since the bed is covalently attached to the capillary wall, no frit is required. The applicability of this new approach to the chiral separation of underivatized amino acids is demonstrated.     

Synthesis of macroporous polymer rods based on an acrylamide derivative monomer

New macroporous polymer rods were prepared by free‐radical crosslinking copolymerization from N‐acryloyl‐tris(hydroxymethyl)aminomethane and N,N′‐methylenebisacrylamide as a crosslinking agent with different porogenic mixtures and with azobisisobutyronitrile as an initiator. The porous properties of these materials were controlled through changes in the proportions of the porogenic mixture, the polymerization temperature, or the concentration of the crosslinking agent. Pore size distribution profiles that shifted toward a larger pore size were obtained in the following cases: when the percentage of the coporogen was increased, when the copolymerization reactions were carried out at a low temperature (55 °C), and when the crosslinking concentration was reduced. Alternatively, a porogenic mixture formed from dimethyl sulfoxide and a 1:1 combination of tetradecanol and poly(ethylene glycol) 6000 as coporogens yielded a polymer rod with a high porosity and pore size. These hydrophilic materials are promising as base supports for different chromatographic processes and as throughput bioreactors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6616–6623, 2006