Effect of lateral substituents on the mesomorphic properties of side-chain liquid crystalline polysiloxanes containing 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate side groups

The synthesis of side-chain liquid crystalline polysiloxanes containing either 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate or laterally fluoro-, chloro-, bromo-, and methoxy-substituted 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate mesogenic side groups is presented. The mesomorphic properties of the synthesized polymers have been characterized by optical polarizing microscopy, differential scanning calorimetry, and X-ray diffraction measurements. The effects of spacer length and lateral substituent on the mesomorphic properties of the obtained polymers are examined. The five polymers which contain three methylene units in the spacers show no mesophase, while the five polymers which contain eleven methylene units in the spacer display smectic mesomorphism. Among the other fifteen polymers which contain respectively four, five, or six methylene units in the spacers, those with small fluoro and chloro substituents reveal respectively an S_A phase, while those with bulky bromo and methoxy substituents show no liquid crystalline behavior. The experimental results demonstrate that introducing a bulky lateral substituent into the mesogenic core of a polymer depresses the tendency to form a mesophase. Furthermore, the technique of thermally stimulated current has been used to study the dipolar relaxation mechanisms in a side-chain liquid crystalline polysiloxane. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2793–2800, 1997     

Synthesis and characterization of new segmented polyurethanes with side‐chain,liquid‐crystalline chain extenders

Liquid‐crystalline, segmented polyurethanes with methoxy–biphenyl mesogens pendant on the chain extender were synthesized by the conventional prepolymer technique and esterification reaction. Two, side‐chain, liquid‐crystalline (SCLC) polyurethanes with mesogens having spacers of six and eight methylene units were prepared. The structures of the mesogenic units and SCLC polyurethanes were confirmed by Fourier transform infrared spectroscopy and ¹H NMR. Polymer properties were also examined by solubility tests, water uptakes, and inherent viscosity measurements. Differential scanning calorimetry studies indicated that the transition temperature of the isotropic to the liquid‐crystalline phase decreased with increasing spacer length. Wide‐angle X‐ray diffraction (WAXD) studies revealed the existence of liquid‐crystalline phases for both SCLC polyurethanes. Polarized optical microscopic investigations further confirmed the thermotropic liquid‐crystalline behaviors and nematic mesophases of both samples. Thermogravimetric analysis displayed better thermal stabilities for both SCLC polymers and indicated that the presence of mesogenic side chains may increase the thermal stability of segmented polyurethanes. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 290–302, 2004     

Side chain liquid crystal polyurethanes with azobenzene mesogenic moieties: Influence of spacer length on hydrogen bonding at different temperatures

A series of side chain liquid crystal polyurethanes (CnCNPs), in which the spacer length was varied from 2 to 12 methylene units, were synthesized by the addition polymerization of α-[bis(2-hydroxyethyl)amino]-ω-(4-cyanoazobenzene-4′-oxy)alkanes (CnCN-diols) with hexamethylene diisocyanate. The liquid crystalline properties of CnCNPs were characterized by means of differential scanning calorimetry, polarizing optical microscopy, and X-ray diffraction. Polyurethanes with spacer length 4 or higher exhibited mesomophic properties. C4CNP and C5CNP exhibited an enantiotropic nematic mesophase, while C6-C12CNPs exhibited enantiotropic bilayer smectic mesophases. CnCNPs have a high tendency to crystallize; crystallization is kinetically controlled. Polyurethane's backbone crystallization is closely related to hydrogen bonding. To establish the role of hydrogen bonding in mesophase formation as well as crystallization, Fourier transform infrared spectroscopy studies of CnCNPs were carried out at different temperatures focusing on H-bonds between the N H and CO groups of the urethane backbone. With increasing temperature, CO and N H stretching bands were evenly shifted to higher wavenumbers, with two exceptions (C4CNP and C5CNP) discussed in detail in the text. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2135–2146, 1998     

Synthesis and properties of segmented main‐chain liquid‐crystalline polyurethanes with a high aspect ratio mesogenic diol as a chain extender

Main‐chain liquid‐crystalline polyurethanes were synthesized based on a high aspect ratio mesogenic diol (4‐{[4‐(6‐hydroxyhexyloxy)‐phenylimino]‐methyl}‐benzoic acid 4‐{[4‐(6‐hydroxyhexyloxy)‐phenylimino]‐methyl}‐phenyl ester) as a chain extender; polycaprolactone (PCL) diol soft segments of different number‐average molecular weights (530, 1250, or 2000); and different diisocyanates, including 1,4‐hexamethylene diisocyanate (HMDI), 4,4′‐methylene bis(cyclohexyl isocyanate) (H₁₂MDI), and 4,4′‐methylene bis(phenyl isocyanate) (MDI). The structure of the polymers was confirmed with Fourier transform infrared spectroscopy, and differential scanning calorimetry and polarizing microscopy measurements were carried out to examine the liquid‐crystalline and thermal properties of the polyurethanes, respectively. The mesogenic diol was partially replaced with 20–50 mol % PCL. A 20 mol % mesogen content was sufficient to impart a liquid crystalline property to all the polymers. The partial replacement of the mesogenic diol with PCL of various molecular weights, as well as the various diisocyanates, influenced the phase transitions and the occurrence of mesophase textures. Characteristic liquid‐crystalline textures were observed when a sufficient content of the mesogenic diol was present. Depending on the flexible spacer length and the mesogenic content, grained and threadlike textures were obtained for the HMDI and H₁₂MDI series polymers, whereas the polyurethanes prepared from MDI showed only grained textures for all the compositions. The polymers formed brittle films and could not be subjected to tensile tests. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1527–1538, 2002     

Synthesis and mesomorphic behavior of a new series of side-chain liquid crystalline polymethacrylates bearing 2,6-naphthylene-based mesogen

A new homologous series of liquid crystalline (LC) polymethacrylates, the poly[ω-(2-phenoxycarbonyl-naphthalene-6-yloxy)alkyl methacrylate]s, in which the length of the alkyl spacer is varied between 3 and 12 methylene units, have been synthesized by free-radical polymerization. The prepared polymers were studied by IR and ¹H-NMR spectroscopy, viscosity measurements, differential scanning calorimetry (DSC), and polarized microscopy. Polymers with 3 or 4 methylene units spacer were glassy in nature, whereas those with 5–12 methylene units spacer exhibited smectic behavior. The glass transition temperatures decrease on increasing spacer length. The isotropization temperatures and the corresponding transition entropies showed an odd–even effect, with the odd members exhibiting the higher values. This effect attenuates on increasing spacer length. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2391–2399, 1999     

Effect of the poly(oxytetramethylene)diol spacer length on some properties of liquid crystalline polyurethanes

Previous studies on liquid crystalline polyurethanes prepared from 4,4′-bis(2-hydroxyethoxy)biphenyl (BHBP) and 2,4-tolylene diisocyanate (TDI) were continued. In this article, a series of polyurethanes, which differ in the flexible spacer length and BHBP content is described. Poly(oxytetramethylene)diols of different molecular weights (PTMO, M _n = 250, 650, 1000, 2000) were used as flexible spacers. The polyurethanes were investigated by DSC, polarizing microscopy, x-ray diffractometry, and IR spectroscopy. The molecular weight distribution was determined by GPC. The morphology of the polyurethanes was investigated by the SALS method. Partial replacement of BHBP by 25–75 mol % PTMO and the flexible spacer length influence the liquid crystalline properties, the phase transition temperatures, and the range of mesophase occurrence. © 1993 John Wiley & Sons, Inc.     

Highly fluorinated monomers precursors of side-chain liquid crystalline polysiloxanes

Two series of monomers, 4-[4-(allyloxy)benzoyloxy]phenyl-3-(perfluoro-n-alkyl)ethyl propanoates and 2-(perfluoro-n-alkyl)ethyl-4-[4-(undec-10-en-1-oyloxy)-benzoyloxy] benzoates have been synthesised. These compounds contain a fluorinated chain obtained from 2-(perfluoro-n-alkyl)ethanol or from 2-(perfluoro-n-alkyl)ethyliodide, and an aliphatic chain containing a double bond attached to a mesogenic moiety. Their hydrosilylation with polymethylhydrogenosiloxane gives the corresponding polysiloxanes with a spacer with three or ten methylene units. These new fluorinated compounds are characterized by a combination of techniques consisting of differential scanning calorimetry (DSC) and thermal optical polarized microscopy. All the monomers exhibited smectogenic properties of type A but for the monomers with a long spacer between the unsaturated function and the mesogenic core (compounds B), the mesophase range decreases dramatically. All of the corresponding polysiloxanes exhibited a liquid crystalline behaviour over a wide temperature range. The influence of the fluorinated chain lengthening leads for the monomers and the polymers to an increasing of the transition temperatures. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4487–4496, 1999     

Synthesis of side chain liquid crystalline copolymers and characterization of their polar structure

A series of side chain liquid crystalline copolymers having different spacer lengths, copolymer compositions, and chromophore types were synthesized and characterized both in the bulk and at the gas‐water interface. Liquid crystalline properties were identified by differential scanning calorimetry (DSC), optical microscopy, and X‐ray diffraction (XRD). Copolymer with spacer lengths 4, 5, 10, and 11 showed smectic A (S_A) phases with a bâtonnet texture. The liquid crystalline (LC) phase stabilized as the spacer increased. Copolymers with different compositions were investigated both as monolayers and transferred films. The isotherms suggest nanodomain formation at the gas‐water interface in copolymers with high nitrobiphenyl (NBP) content. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1057–1070, 1999     

Main chain thermotropic liquid crystalline polyurethanes containing biphenyl mesogens based on novel AB‐type self‐polycondensation route: FT‐IR and XRD studies

The detailed mesophasic characterization of main chain liquid crystalline polyurethanes containing biphenyl mesogen, which were synthesized by the novel AB‐type self‐polycondensation approach, was carried out by using Differential Scanning Calorimetry (DSC), Polarized Optical Microscopy (POM), variable temperature X‐ray Diffraction (XRD), and Fourier Transform Infrared (FT‐IR) spectroscopic studies. The type of mesophase present in these polymers was identified to be the smectic A phase by POM and XRD studies. The smectic layer thickness was found to increase as the length of the spacer increased. The effect of temperature on the hydrogen bonding was analyzed by FT‐IR studies. The curve‐fitting analysis of the NH stretching and C?O stretching modes of vibrations indicated a gradual decrease in hydrogen bonding during the transition from the crystalline state to the mesophase. The mesophase to isotropic liquid transition was then accompanied by the complete disappearance of the hydrogen bonding. The biphenyl bands also showed changes during phase transitions due to the coupling of biphenyl vibration modes with the urethane linkage attached to it. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1903–1912, 2005     

Liquid crystalline properties of unsegmented and segmented polyurethanes synthesised from high aspect ratio mesogenic diols

A series of novel tetrad high aspect ratio mesogenic diol monomers 4-{[4-(n-hydroxyalkoxy)-phenylimino]-methyl}-benzoic acid 4-{[4-(n-hydroxyalkoxy)-phenylimino]-methyl}-phenyl ester were prepared with varying alkoxy spacer length (n=2,4,6,8,10) by reacting 4-formylbenzoic acid 4-formylphenyl ester and 4-(n-hydroxyalkoxy) anilines. Two series of thermotropic main chain liquid crystalline unsegmented polyurethanes (PUs) were obtained by the polyaddition of the mesogenic diols with hexamethylene diisocyanate (HMDI) and methylene bis(cyclohexylisocyanate) (H₁₂MDI) in dimethylformamide respectively. The effect of the incorporation of a third component namely polyol on the liquid crystalline properties of the polyurethanes was also studied. Linear segmented PUs were synthesised by a two-step block copolymerisation method. The PUs synthesised were based on six spacer mesogenic diol chain extender, soft segments poly(tetramethylene oxide)glycol (PTMG) (M_n= 650,1000,2000) and polycaprolactone diol (PCL) (M_n=530,1250,2000) of varying molecular weights and different diisocyanates including HMDI, H₁₂MDI and methylene bis(phenylene isocyanate) (MDI). Structural elucidation was carried out by elemental analysis, fourier transform infra red (FT-IR), nuclear magnetic resonance (¹H NMR and ¹³C NMR) spectroscopy. Inherent viscosity of the unsegmented polymers measured in methanesulphonic acid at 26°C was in the range of 0.13 - 0.65 dL/g while the molecular weights and molecular weight distribution of the segmented polyruethanes was determined using gel permeation chromatography (GPC). Mesomorphic properties were studied by differential scanning calorimetry (DSC) and hot stage polarising optical microscopy and the thermal stability was determined by thermogravimetric(TG)analysis. The monomeric diols and the polyurethanes exhibited nematic texture and good mesophase stability. It was observed that the partial replacement of the mesogenic diol by the polyol of varying molecular weights influenced the phase transitions and the occurrence of mesophase textures. The phase transition temperatures of the investigated polyurethanes showed dependence on the chain length of the soft segment and on the content of the mesogen moiety. A higher content of mesogenic moiety was needed to obtain liquid crystalline property when the soft segment length was increased as observed in the case of PTMG. Grained and threaded textures were observed depending on the molecular weight of the soft segment, the mesogen content and the diisocyanate. The stress-strain analyses showed that the polymers bused on high molecular weight PTMG soft segment have elastomeric property while the PCL based PUs displayed no elastomeric property.     

Synthesis and characterization of polymaleimides containing 4-cyanobiphenyl–based side groups for nonlinear optical applications

A new homologous series of SCLCPs containing the 4-cyanobiphenyl mesogenic group attached to the polymaleimide backbone through paraffinic spacers of two to eight methylene units have been prepared. All the polymers exhibit liquid crystalline behavior; specifically S_Ad- (or S_C-) like and nematic phases are observed. The glass transition temperature decreases from 150 to 43°C on increasing spacer length. The isotropization temperatures exhibit an odd–even effect on varying the length and parity of the spacer, in which the odd members exhibit the higher values. This is attributed to the change in the average shape of the side chain as the parity of spacer is varied. The isotropization temperatures (>300–120°C) and the mesophase thermal stabilities (190–60°C) are high. Comparison is made with polymers containing the same mesogenic group attached to backbones of decreasing rigidity. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2531–2546, 1998     

Influence of the poly(propylene imine) generation in the LC properties of ionic codendrimers bearing fluorinated and perhydrogenated chains

A series of codendrimers constituted by the first five generations of poly(propylene imine) (PPI) ionically substituted with 2H,2H,3H,3H‐perfluoroundecanoic acid (af) and undecanoic acid (ac) in a fixed ratio (1:3) (af:ac) have been synthesized and their supramolecular organization has been investigated both in the liquid crystalline state and on a surface. Incompatibility generated by combining fluorinated and perhydrogenated chains in the same molecule causes a peculiar mesomorphic behavior depending on the generation of the codendrimers. Thus smectic A, frustrated smectic A or rectangular columnar mesophases have been detected. Despite their different liquid crystalline organization, they are capable to self‐assemble in homogeneous molecular length layers on a surface, namely mica as revealed by atomic force microscopy (AFM) experiments. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 49: 278–285, 2011     

Annealing effects on the thermal properties of liquid crystalline polyurethanes

This work is a continuation of our earlier investigations of liquid crystalline polyurethanes prepared from 4,4′-bis(2-hydroxyethoxy) biphenyl (BHBP), 2,4-tolylene diisocyanate (TDI), and poly (oxytetramethylene) diols (PTMO). The annealing effects on the thermal properties of the investigation polyurethanes are presented for three samples with the same BHBP content, different flexible spacer length, and different molecular weight of the polyurethanes. The annealed polyurethanes were investigated by means of DSC, and polarizing microscopy. The results of the thermal analysis show that the temperatures of phase transitions depend on the annealing temperature and time. These dependences are different for different molecular weights. © 1994 John Wiley & Sons, Inc.     

Effect of molecular structure on mesomorphism XXI. Monodisperse tetrameric model compounds for liquid crystalline polymers

Abstract

Twinned dimeric mesogens having a rigid-flexible-rigid molecular structure have been shown to be appropriate models for some properties of regularly alternating (rigid-flexible)_n main chain liquid crystalline polymers (lcps). A family of tetrameric monodisperse liquid crystalline model compounds chemically related to known main chain liquid crystalline polymers of the 4-alkoxyphenyl 4′-alkoxy-benzoate type has been synthesized. The tetramers are nematogenic. Alternations in thermodynamic parameters (ΔH, ΔS) for the N-I transition as a function of spacer chain length indicate conformational behaviour of the internal spacers dominates mesophase properties.     

Benzyl ether polymers: Crystallinity and pendant adamantyl effects

A series of benzyl ether polymers with and without pendant adamantyl groups has been synthesized. A–B homopolymers with dibenzylether and thioether connecting units were made by phase transfer reaction of 2-(4-bromomethylphenyl)-6-bromomethylbenzoxazole with KOH or Na₂S. The ether-linked material was soluble only in conc. H₂SO₄ while the thioether polymer was only soluble in a mixture of trifluoroethanol and chloroform. The parent AA–BB polyether from resorcinol and α,α′-dichloro-p-xylene (or the dibromo analog) was obtained as a very high molecular weight product which showed multiple crystalline forms depending on sample history. Solid-state ¹³C-NMR spectroscopy and x-ray diffraction patterns were obtained on two samples [each with a single (different) type of crystalline domain], a high molecular weight sample displaying both types, and on amorphous material. Incorporation of pendent adamantyl groups was also examined because of their ability to enormously modify polymer properties. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1743–1751, 1997     

Structure–property relationship of photoactive liquid crystalline polyethers containing benzylidene moiety

A series of main chain photoactive liquid crystalline polyethers, containing rigid bisbenzylidene photoactive mesogen and flexible methylene spacers, were synthesized by polycondensation of bisbenzylidene diols and dibromoalkanes. The polyethers were characterized with ¹H NMR, gel permeation chromatography (GPC), differential scanning calorimeter (DSC), thermo gravimetric analyzer (TGA), and polarized light optical microscopy. The individual and combined effects of spacer length and number of methoxy substituents on mesogenic and photoactive properties were investigated. Both first order and second order transition temperatures decreased with increased spacer length and the number of substituents. The combined effect of spacers and substituents drastically reduced the transition temperatures. All monomers and polymers showed mainly the smectic mesophase. In a few cases, nematic droplets along with the smectic phase were observed. The width of the liquid crystalline phase reduced with an increasing number of methoxy substituents on mesogenic unit. Variation of spacer length has a negligible effect on photocycloaddition. However, steric hinderance caused by the substituents decreased the photoactivity as the number of substituents increased. Total energies of crosslinked dimers calculated from modeling studies supported the above findings. Intermolecular photocycloaddition was also confirmed by photoviscosity measurement. The refractive index change was found to be in the range of 0.017–0.031. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2143–2155, 2009     

Side‐chain liquid crystalline polyacrylates containing 3,4‐disubstituted pyrrole moiety

Polymerization of liquid crystalline bifunctional monomer N‐{{ω‐{4‐[4‐(11‐acryloyloxy)undecanoxybenzoyl]biphenyleneoxy} alkyl}}‐3,4‐dimethylpyrrole gave a side‐chain liquid crystalline polyacrylate containing 3,4‐dimethylpyrrole group. Liquid crystallinity was determined by DSC and optical polarizing microscope measurements. The monomers having pentylene, hexylene, and decylene as the alkylene spacer group between the mesogenic unit and the 3,4‐dimethylpyrrole group exhibited smectic and nematic phases on the heating and cooling stages. The radically polymerized polyacrylate derivatives containing the 3,4‐dimethylpyrrole group showed nematic phases on the heating and cooling stages. These polymers are the first example of side‐chain liquid crystalline polymers containing 3,4‐dimethylpyrrole as functional group for further reaction. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1214–1221, 2000     

Synthesis,thermal, and photocrosslinking studies of thermotropic liquid crystalline poly(benzylidene‐ether)esters containing α,β‐unsaturated ketone moiety in the main chain

A series of poly(benzylidene‐ether)esters containing a photoreactive benzylidene chromophore in the main chain were synthesized from 2,6‐bis(4‐hydroxy‐3‐methoxybenzylidene)cyclohexanone (BHMBCH) with various aliphatic and aromatic diacid chlorides by an interfacial polycondensation technique. The intrinsic viscosity of the synthesized homo and copolymers determined by Ubbelohde viscometer was found to be 0.12 to 0.17 dL/g. The molecular structure of the monomer and polymers was confirmed by FT‐IR, ¹H NMR, and ¹³C NMR spectral analyses. These polymers were studied for their thermal stability and photochemical properties. Thermal properties were evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). It was found that the polymers were stable up to 280 °C and start degrading thereafter. Increase in acid methylene spacer length decreased the thermal stability. The self‐extinguishing property of the synthesized polymers was studied by calculating the limiting oxygen index (LOI) value using a Van Krevelen's equation. The influence of the length of methylene spacer on phase transition was investigated using DSC and odd‐even effect has been observed. Hot‐stage optical polarizing microscopic (HOPM) study showed that most of the polymers exhibited birefringence and opalescence properties. The photolysis of liquid crystalline poly(benzylidene‐ether)esters revealed that α,β‐unsaturated ketone moiety in the main chain dimerises through 2π + 2π cycloaddition reaction to form a cyclobutane derivative and leads to crosslinking. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Influence of molecular weight on some properties of liquid crystalline polyurethanes

This investigation extends our previous investigations of liquid crystalline polyurethanes prepared from 4,4′-bis(2-hydroxyethoxy)biphenyl (BHBP), 2,4-tolylene diisocyanate, and poly(oxytetramethylene)diols as the flexible spacers. The influence of molecular weight of investigated polyurethanes on their properties is discussed for two series with the same content of BHBP and different lengths of flexible spacers. The polyurethanes were investigated by means of DSC, polarizing microscopy, x-ray diffractometry, and IR spectroscopy. The molecular weight distribution was determined by GPC. Morphology was studied by the SALS method. The molecular weight of polyurethanes and the length of flexible spacer influence the phase transition temperature and the range of mesophase occurrence. © 1993 John Wiley & Sons, Inc.     

Design,synthesis, and characterization of main‐chain,aromatic polyesters based on 3,4‐ethylenedioxythiophene

A series of new thermoplastic polyesters based on 3,4‐ethylenedioxythiophene (EDOT) with flexible aliphatic spacers have been synthesized and characterized for the first time. The thermal properties of these polyesters based on EDOT are comparable to those of conventional polyesters based on the 1,4‐phenyl unit, indicating that EDOT is a viable replacement for the phenyl units. The glass‐transition and melting‐transition temperatures decrease monotonically with an increase in the spacer length. Theoretical calculations have revealed that the core angle for EDOT is comparable to that of unsubstituted thiophene and hence should be compatible with the formation of the mesophase. This has been confirmed experimentally by the synthesis of a main‐chain, thermotropic, liquid‐crystalline polyester based on EDOT that exhibits fluid birefringence. In fact, this is the first report in which a main‐chain, liquid‐crystalline polymer based on 3,4‐disubstituted thiophene has been successfully designed and synthesized. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3479–3486, 2006