Cyclopolymerization of 3-phenyl[5]ferrocenophane-1,5-dimethylene: Synthesis and electronic properties of a polyferrocenophane

Radical cyclopolymerization of 3-phenyl[5]ferrocenophane-1,5-dimethylene ( 2 ) and copolymerization with styrene gave polymers ( 3 and 4 ) with [3]ferrocenophane moieties pendant to the backbone. Cyclic voltammetry (CV) on polymer 3 in CH₂Cl₂ showed two oxidation waves at −0.13 and +0.05 V (versus ferrocene/ferrocenium) and CV on copolymer 4 showed one oxidation potential at −0.03 V. CV on 3 in dimethylacetamide showed only one oxidation potential at −0.10 V. Near-IR spectroscopy of partially oxidized 3 showed a broad intervalence band at ca. 2000 nm, indicative of low-energy barriers to electron hopping. Conductivity measurements on 3 and poly(vinylferrocene) (PVFc) oxidatively doped with iodine vapors under an argon atmosphere showed a maximum conductivity ca. 5 × 10⁻⁵ S/cm before the samples cracked, while 4 exhibited a maximum conductivity of 1.6 × 10⁻⁶ S/cm. On iodine doping under ambient conditions, polymers 3 , 4 , and PVFc showed maximum conductivities of 7.6 × 10⁻⁴, 9.5 × 10⁻⁵, and 5.5 × 10⁻⁵ S/cm, respectively. Conductivity measurement were also performed on samples of 3 ⁺BF₄⁻ with oxidation levels ranging from 8 to 56%. Conductivities of these samples ranged from ca. 10⁻¹⁰ to 10⁻⁹ S/cm under vacuum and ca. 10⁻⁶ S/cm under ambient conditions, indicating that atmospheric moisture has a strong effect on the conductivity. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3365–3376, 1997     

New aromatic benzazole polymers II: Synthesis and conductivity of benzobisthiazole-co-polymers incorporated with 4-N,N-dimethylaminotriphenylamine groups

New aromatic benzobisthiazole copolymers containing 10–70 mol % of 4-N,N-dimethylamino-triphenylamine functionality were prepared from the respective dinitrile or dicarboxylic acid monomers, terephthalic acid, and 2,5-diamino-1,4-benzene-dithiol dihydrochloride in polyphosphoric acid. At the first approximation, the copolymers containing 10 mol % or less of the triarylamino moieties in the polymer chains still preserve the capability to form anisotropic (nematic) solutions at 10 wt % polymer concentration. This is an important requirement for processing the copolymers into fibers and films with good to excellent mechanical properties. Films with good mechanical integrity were cast from the dilute methanesulfonic acid solutions of the copolymers under reduced pressure. They showed electrical conductivity values of the order of 10⁻¹¹–10⁻¹⁰ S/cm in pristine state, with four to seven orders of magnitude increase upon exposure to mild oxidizing agents such as iodine vapor. On the contrary, the parent polymer, poly(p-phenylene benzobisthiazole) is an insulator with conductivity of less than 10⁻¹² S/cm, and its conductivity does not improve at all with exposure to iodine vapor. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 713–724, 1998     

The synthesis of poly(phenylacetylene)s with bulky chiral silyl groups and the thermal stability of their helical conformation

The polymerization of (−)‐p‐[(tert‐butylmethylphenyl)silyl]phenylacetylene (t‐BuMePhSi*PA) and (+)‐p‐[{methyl(α‐naphthyl)phenyl}silyl]phenylacetylene (MeNpPhSi*PA) with the [(nbd)RhCl]₂ Et₃N catalyst yielded polymers with very high molecular weights over 2 × 10⁶ in high yields. The optical rotations of the formed poly(t‐BuMePhSi*PA) and poly(MeNpPhSi*PA) were as high as −356 and −150° (c = 0.11 g/dL in CHCl₃), respectively. The circular dichroism (CD) spectrum of poly(t‐BuMePhSi*PA) in CHCl₃ exhibited very large molar ellipticities ([θ]) in the UV region: [θ]_max = 9.2 × 10⁴ ° · cm² · dmol⁻¹ at 330 nm and −8.0 × 10⁴ ° · cm² · dmol⁻¹ at 370 nm. The [θ]_max values of poly(MeNpPhSi*PA) were also fairly large: [θ]_max = 7.1 × 10⁴ ° · cm² · dmol⁻¹ at 330 nm and −5.3 × 10⁴ ° · cm² · dmol⁻¹ at 370 nm. The optical rotations of poly(t‐BuMePhSi*PA) and poly(MeNpPhSi*PA), measured in tetrahydrofuran, chloroform, and toluene solutions, were hardly dependent on temperature in the range 22–65 °C. The CD effects of these polymers hardly changed in the temperature range 28–80 °C, either. These results indicate that the helical structures of these polymers are thermally appreciably stable. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 71–77, 2001     

Ionic conductivity of complexes of novel multiarmed polymers with phosphazene core and LiClO4

Novel multiarmed polymers with ethylene oxide units, [( CH₂CH₂O)_n : 7, n = 3; 8, n= 7.2; 9, n = 11.8, and 12, n = 11.8] were prepared from the reaction of polyethylene glycol monomethyl ethers with acid chlorides of hexakis(3,5-dicarboxyphenoxy)-( 6 ) and hexakis(4-carboxyphenoxy)cyclotriphosphazenes ( 11 ) and conductivities of their Li⁺ salt complexes were investigated. The glass transition temperatures of the salt-free polymers are in the temperature range −59 to −54°C, indicative of a high degree of reorientational mobility of the arms. When LiClO₄ was added to the multiarmed polymers, the T_g values raised monotonically. The extent of T_g elevation was affected by the length of arms and the number of oxygen atoms around cyclotriphosphazene core and increased in the order 7 > 8 > 12 > 9 . The conductivities increased in the order 9 > 8 = 12 > 7 and the maximum conductivities of 4.0 × 10⁻⁵ S/cm at 30°C and 6.0 × 10⁻⁴ S/cm at 90°C have been achieved for the 9 -Li⁺ complex with Li⁺/O = 0.03. Interestingly, the conductivity of 9 -Li⁺ complexes at constant reduced temperatures increased in the whole concentrations of LiClO₄ examined (Li⁺/O = 0.01–0.2), although the degree of increase in conductivity above Li⁺/O = 0.06 became small. From the behaviors of T_g and the conductivity of multiarmed polymer–LiClO₄ complexes, it appears that the conductivity is governed by relative concentrations of inter- and intramolecular complexes in the polymer matrix. The influence of structural change of the comb-shaped to multiarmed polymers on the conductivity is described. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1839–1847, 1997     

Oxyalkylene polymers with alkylsulfonylmethyl side chains: Gas barrier properties

Gas barrier properties of alkylsulfonylmethyl-substituted poly(oxyalkylene)s are discussed. Oxygen permeability coefficients of three methylsulfonylmethyl-substituted poly(oxyalkylene)s, poly[oxy(methylsulfonylmethyl)ethylene] (MSE), poly[oxy(methylsulfonylmethyl)ethylene-co-oxyethylene] (MSEE), and poly[oxy-2,2-bis (methylsulfonylmethyl)trimethylene oxide] (MST) were measured. MSEE, which has the most flexible backbone of the three polymers, had an oxygen permeability coefficient at 30°C of 0.0036 × 10⁻¹³ cm³(STP)·cm/cm²·s·Pa higher than that of MSE, 0.0014 × 10⁻¹³ cm³(STP)·cm/cm²·s·Pa, because the former polymer's T_g was near room temperature. MST with two polar groups per repeat unit and the highest T_g showed the highest oxygen permeability, 0.013 × 10⁻¹³ cm³(STP) · cm/cm²·s·Pa, among the three polymers, probably because steric hindrance between the side chains made the chain packing inefficient. As the side chain length of poly[oxy(alkylsulfonylmethyl)ethylene] increased, T_g and density decreased and the oxygen permeability coefficients increased. The oxygen permeability coefficient of MSE at high humidity (84% relative humidity) was seven times higher than when it was dry because absorbed water lowered its T_g. At 100% relative humidity MSE equilibrated to a T_g of 15°C after 2 weeks. A 50/50 blend of MSE/MST had oxygen barrier properties better than the individual polymers (O₂ permeability coefficient is 0.0007 × 10⁻¹³ cm³(STP)·cm/cm² ·s·Pa), lower than most commercial high barrier polymers. At 100% relative humidity, it equilibrated to a T_g of 42°C, well above room temperature. These are polymer systems with high gas barrier properties under both dry and wet conditions. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 75–83, 1998     

Effects of Chain Ends on Thermal and Mechanical Properties and Recyclability of Poly(γ-butyrolactone)

This work investigates effects of poly(γ-butyrolactone) (PγBL) with different initiation and termination chain ends on five types of materials properties, including thermal stability, thermal transitions, thermal recyclability, hydrolytic degradation, and dynamic mechanical behavior. Four different chain-end-capped polymers with similar molecular weights, BnO-[C(=O)(CH₂)₃O]_n-R, R = C(=O)Me, C(=O)CH=CH₂, C(=O)Ph, and SiMe₂CMe₃, along with a series of uncapped polymers R′O-[C(=O)(CH₂)₃O]_n-H (R′ = Bn, Ph₂CHCH₂) with M_n ranging from low (4.95 kg mol⁻¹) to high (83.2 kg mol⁻¹), have been synthesized. The termination chain end R showed a large effect on polymer decomposition temperature and hydrolytic degradation, relative to H. Overall, for those properties sensitive to the chain ends, chain-end capping renders R-protected linear PγBL behaving much like cyclic PγBL. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2271–2279     

Polybenzoxazole from 1,4-bis(trichloromethyl)benzene

High molecular weight poly(phenylenebenzobisoxazole) (PBO) was synthesized from 1,3-diamino-4,6-dihydroxybenzene dihydrochloride (1) and 1,4-bis(trichloromethyl)benzene (3) in polyphosphoric acid (PPA) or a mixture of PPA and methanesulfonic acid. When PPA was used as the solvent, 3 was first converted in situ to terephthalic acid before 1 was added to minimize degradation of 1. Compound 3 did not need to be sealed from atmospheric moisture because the trichloromethyl groups were not moisture sensitive. It was not necessary to use micronized 3. Adjustment of P₂O₅ content was optional for this reaction because no water was liberated from the condensation of 1 and 3. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2143–2145, 1997     

Solid polymer electrolytes I,preparation, characterization,and ionic conductivity of gelled polymer electrolytes based on novel crosslinked siloxane/poly(ethylene glycol) polymers

A series of crosslinked siloxane/poly(ethylene glycol) (Si–PEG) copolymers were synthesized from the reactive methoxy‐functional silicone resin (Si resin) and PEGs with different molecular weights via two kinds of crosslinking reactions during an in situ curing stage. One of the crosslinking reactions is the self‐condensation between two methoxy groups in the Si resin, and another one is an alkoxy‐exchange reaction between the methoxy group in the Si resin and the OH group in PEG. The synthesized crosslinked copolymers were characterized by Fourier transform infrared spectroscopy, DSC, and ¹³C NMR. The crosslinked copolymers were stable in a moisture‐free environment, but the Si? O? C linkages were hydrolyzed in humid conditions. The gel‐like solid polymer electrolytes (SPEs) were prepared by impregnating these crosslinked Si–PEG copolymers in a propylene carbonate (LiClO₄/PC) solution. The highest conductivity reached 2.4 × 10^?4 S cm^?1 at 25 °C and increased to 8.7 × 10^?4 S cm^?1 at 85 °C. The conductivities of these gel‐type SPEs were affected by the content of LiClO₄/PC, the molecular weights of PEGs, and the weight fraction of the Si resin. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2051–2059, 2004     

Thermal properties of poly(anthranilic acid) (PANA) and humidity-sensitive composites derived from heat-treated PANA and poly(vinyl alcohol)

Thermal conversion of poly(anthranilic acid) (PANA) to polyaniline (PAn) has been studied by means of thermogravimetric/mass (TG/MS) and Fourier transform infrared (FTIR) spectroscopy. The electrical conductivity of the chemically prepared PANA was 3.5 × 10⁻² S/cm, which is caused by the self-doping of the polaronic nitrogen atom interacting with the ionized carboxyl group ( COO⁻). The heat-treated PANA can be assumed to be identical to an emeraldine base of PAn. The pyrolysis of PANA proceeded through the decarboxylation at two stages from carboxyl ( COOH) and ionized carboxyl groups, which occurred at about 170 and 230 °C, respectively. PANA–SA, which was prepared by treating PANA at 250 °C and then doping with an external protonic acid at room temperature, showed a considerably high conductivity (6.2 S/cm). The composite consisting of PANA–SA and poly(vinyl alcohol) was very sensitive to the environmental humidity. The logarithm of electrical conductivity of this composite was proportional to the relative humidity covering more than five orders of magnitude, and the change in conductivity extended from 4.2 × 10⁻⁵ to 10 S/cm upon the humidity variation from 14 to 91%. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4458–4465, 1999     

Synthesis and characterization of poly(benzazoles) containing the bicyclo[2.2.2]octane moiety

Poly(benzobisoxazoles) (PBOs), poly(benzobisthiazoles) (PBTs) and copolymers thereof containing the 2,5-dihydroxybicyclo[2.2.2]octane moiety have been prepared and studied. The homopolymers were synthesized by the polycondensation of 2,5-dihydroxybicyclo[2.2.2]octane-1,4-dicarboxylic acid with 4,6-diamino-1,3-benzenediol dihydrochloride or 2,5-diamino-1,4-benzenedithiol dihydrochloride in poly(phosphoric acid). Random and block copolymers (PBO–PBT) were also prepared. The polymers were characterized by solubility, X-ray diffraction, spectroscopy (infrared and solid-state ¹³C nuclear magnetic resonance), and thermal analysis such as differential scanning calorimetry and thermogravimetric analysis. Thermogravimetric analysis showed thermal stability of the polymers above 375°C in air and under argon atmosphere. The polymers exhibited high resistance to organic and inorganic solvents. The polymers were converted to the more stable aromatic polymers via dehydration and retro Diels–Alder reactions of the 2,5-dihydroxybicyclo[2.2.2]octyl moiety by pyrolysis. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 277–281, 1998     

Synthesis of some novel heteroarylene ethynylene polymers containing 1,10-phenanthroline in the polymer backbone

Palladium-catalyzed polycondensation between 3,8-dibromo-1,10-phenanthroline and substituted phenyl-1,4-diacetylenes in the presence of diisopropylamine produced the soluble π-conjugated poly(heteroarylene ethynylene)s 7a and 7b . The polymers were obtained in high yields (86–92%) and had molecular weights of M̄_n = 8700 g · mol⁻¹ ( 7a ; vapor pressure osmometry) and 6900 g · mol⁻¹ ( 7b ; vapor pressure osmometry). The low molecular model compounds 6a and 6b were prepared to analyze the connection between the primary structure and spectroscopic properties. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4442–4448, 1999     

Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006     

Synthesis and absorption/emission properties of novel poly(silylenearylenevinylene)s

Polymerization of p-(dimethylsilyl)phenylacetylene in toluene at 25 and 80 °C with RhI(PPh₃)₃ catalyst afforded highly regio- and stereoregular poly(dimethylsilylene-1,4-phenylenevinylene)s [cis- and trans-poly( 1a )s] containing 98% cis- and 99% trans-vinylene moieties, respectively. The trans-type polymers exhibited redshifts and hyperchromic effects in the ultraviolet–visible spectrum as compared with the cis-type counterparts. Photoirradiation of cis- and trans-poly( 1a )s gave cis-rich mixtures at equilibrium states. The trans and cis polymers exhibited different emission properties, for example—trans polymer, emissn λ_max = 400 nm, quantum yield: 3.4 × 10⁻³ and cis polymer, emissn λ_max = 380 nm, quantum yield: 1.5 × 10⁻³. Besides poly( 1a ), poly(dimethylsilylenearylenevinylene)s containing biphenylene and phenylenesilylenephenylene units [poly( 3 )] were prepared. The extent of conjugation in these polymers decreased in the orders of biphenylene > phenylene > phenylenesilylenephenylene as well as trans-vinylene > cis-vinylene. The quantum yield of the trans-rich polymer with biphenylene moiety was fairly large and 0.15. Polyaddition of 1,4-bis(dimethylsilyl)benzene and three types of diethynylarenes (4,4′-diethynylbiphenyl, 2,7-diethynylfluorene, and 2,6-diethynylnaphthalene) catalyzed by RhI(PPh₃)₃ provided novel regio- and stereoregular polymers [poly( 6 )]. These polymers displayed blue light emission with high quantum yields (4–81%). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3615–3624, 2003     

Synthesis and properties of a soluble and widely conjugated polyacetylene with anthryl pendant

The metathesis polymerization of an anthrylacetylene bearing an alkyl ester group, 9‐(10‐hexoxycarbonyl)anthrylacetylene ( 1 ), was conducted with various transition‐metal catalysts. A completely soluble black polymer was obtained from 1 in a good yield when W‐based catalysts were employed. The polymerization at a high monomer concentration (1 M) and a high temperature (80 °C) led to the formation of poly( 1 ) with a weight‐average molecular weight of 297 × 10³ in an 80% yield. The use of cocatalysts unexpectedly decreased both the yield and molecular weight of poly( 1 ). Rh‐catalyzed and Mo‐catalyzed polymerizations, however, resulted in poor yields of the polymer. The ultraviolet–visible spectrum of poly( 1 ) showed a significantly redshifted absorption (λ_max = 571) with a cutoff at 780 nm, which verified the very high order of conjugation of the main chain. Poly( 1 ) exhibited the largest third‐order nonlinear optical susceptibility [χ⁽³⁾ (−ω; ω, 0, 0) = − 1.9 × 10⁻¹⁰ esu] among the polymers from the monosubstituted polyacetylenes synthesized so far. The electrical conductivity of poly( 1 ) in an I₂‐doped state was 8.77 × 10⁻⁴ at 293 K. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4717–4723, 2000     

Preparation and characterization of branched and linear sulfonated poly(ether ketone sulfone) proton exchange membranes for fuel cell applications

Branched sulfonated poly(ether ketone sulfone)s (Br‐SPEKS) were prepared with bisphenol A, bis(4‐fluorophenyl)sulfone, 3,3′‐disodiumsulfonyl‐4,4′‐difluorobenzophenone, and THPE (1,1,1‐tris‐p‐hydroxyphenylethane), respectively, at 180 °C using potassium carbonate in NMP (N‐methylpyrrolidinone). THPE, as a branching agent, was used with 0.4 mol % of bisphenol A to synthesize branched copolymers. Copolymers containing 10–50 mol % disulfonated units were cast from dimethylsulfoxide solutions to form films. Linear sulfonated poly(ether ketone sulfone)s (SPEKS) were also synthesized without THPE. The films were converted from the salt to acid forms with dilute hydrochloric acid. A series of copolymers were studied by Fourier transform infrared, ¹H‐NMR spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymers with water and methanol. The ion‐exchange capacity (IEC), a measure of proton conductivity, was evaluated. The synthesized Br‐SPEKS and SPEKS membranes exhibit conductivities (25 °C) from 1.04 × 10^?3 to 4.32 × 10^?3 S/cm, water swell from 20.18 to 62.35%, IEC from 0.24 to 0.83 mequiv/g, and methanol diffusion coefficients from 3.2 × 10^?7 to 4.7 × 10^?7 cm²/S at 25 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1792–1799, 2008     

Polymerization of diphenylacetylenes having very bulky silyl groups and polymer properties

Polymerization and polymer properties of 1-phenyl-2-[4-(triphenylsilyl)phenyl]acetylene (pPh₃SiDPA) and 1-phenyl-2-[4-(triisopropylsilyl)phenyl]acetylene (piPr₃SiDPA), which have very bulky silyl groups, were examined. These monomers polymerized in good yields in the presence of TaCl₅-based catalysts. The highest weight-average molecular weights of poly(pPh₃SiDPA) and poly(piPr₃SiDPA) reached about 1 × 10⁶ and 4.8 × 10⁶, respectively. The polymers were yellow to orange-colored solids which were soluble in toluene, chloroform, etc., and provided free-standing films by solution casting. The onset temperatures of weight loss of poly(pPh₃SiDPA) and poly(piPr₃SiDPA) in TGA in air were 430 and 270°C, respectively. The oxygen permeability coefficients of poly(pPh₃SiDPA) and poly(piPr₃SiDPA) at 25°C were 3.8 and 20 barrers, respectively, and relatively small. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2721–2725, 1998     

Poly(fluorenevinylene) derivatives by Heck coupling: Synthesis,photophysics, and electroluminescence

Three new poly(fluorenevinylene) derivatives were synthesized, characterized, and used as emissive materials in light‐emitting diodes (LEDs). They were synthesized by Heck coupling of 9,9‐dihexyl‐2,7‐divinylfluorene with 2,7‐dibromo‐9,9‐dihexylfluorene, 2,3‐bis(4‐bromophenyl)quinoxaline, or 2,5‐bis(4‐bromophenyl)‐3,4‐diphenylthiophene to afford the polymers F , Q , and T , respectively. Polymers F and Q had medium number–average molecular weights (M_n ? 14,000) with relatively narrow polydispersity (1.3–1.6), while T was obtained as an oligomer (M_n ? 4000). All polymers were soluble in common organic solvents, such as tetrahydrofuran (THF), chloroform, dichloromethane, and toluene. They emitted blue‐greenish fluorescence light in dilute THF solution (444–491 nm), with photoluminescence (PL) quantum yields of 0.32–0.54, and in thin film (453–488 nm). LEDs with the configuration of ITO/PEDOT‐PSS/Polymer/Li:Al were fabricated and evaluated. The electroluminescence (EL) spectra of the Q and F polymers were very broad covering the blue–green–red region, whereas the spectrum of the polymer T was almost purely blue. The threshold electrical field for light emission of the devices was almost the same (?1.75 MV/cm). The external quantum efficiency of the devices of polymers Q and F was about 1.0 × 10^?3%, whereas that of polymer T was ?3.0 × 10^?5%. The fluorescence lifetime of polymers F and Q was significantly longer than that of the polymer T . © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4494–4507, 2006     

Synthesis and characteristics of the poly(carboxybetaine)s and the corresponding cationic polymers

Two types of carboxybetaines and their corresponding cationic monomers and polymers are synthesized in this study. Comparing the chemical shifts of the methylene groups in the cationic monomers and carboxybetaines in both ¹H- and ¹³C-NMR spectra reveal that the respective methylene groups are clearly distinguished from their chemical shifts in ¹H- and ¹³C-NMR spectra. The solubilities, moisture regain properties, and solution properties of the poly(carboxybetaine)s and cationic polymers are investigated in relation to their molecular structures. Because the cationic polymers were ionized in an aqueous solution, the cationic polymers were more soluble than the poly(carboxybetaine). For the various functional groups of poly(carboxybetaine)s and cationic polymers, the order of tendency for moisture regain is  COO >  CONH . Results obtained from the reduced viscosity for cationic poly(TMMPAMS) are reversed from that for zwitterionic poly(DMAEAPL). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3527–3536, 1997     

Cross‐linked poly(aryl ether sulfone) membranes for direct methanol fuel cell applications

Partially sulfonated poly(aryl ether sulfone) (PESS) was synthesized and methacrylated via reaction with glycidyl methacrylate (PESSGMA) and cross‐linked via radical polymerization with styrene and vinyl‐phosphonic acid (VPA). The chemical structures of the synthesized pre‐polymers were characterized via FTIR and ¹H NMR spectroscopic methods and molecular weight was determined via GPC. Membranes of these polymers were prepared via solution casting method. The crosslinking of the PESS polymer reduced IEC, proton conductivity, swelling in water, and methanol permeability of the membranes while increasing the modulus and the glass transition temperature. However, the introduction of the VPA comonomer increased the proton conductivity while maintaining excellent resistance to methanol cross‐over, which was significantly higher as compared with both PESS and the commercial Nafion membranes. Membranes of PESSGMA copolymers incorporating VPA, exhibited proton conductivity values at 60 °C in the range of 16–32 mS cm⁻¹ and methanol permeability values in the range of 6.52 × 10⁻⁹ – 1.92 × 10⁻⁸ cm² s⁻¹. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 558–575     

Syntheses and antitumor activities of monomer and medium molecular weight polymers. III. 3,6-endo-methylene-1,2,3,6-tetrahydrophthalimidopropanoyl-5-fluorouracil and its polymers

The new monomer, 3,6-endo-methylene-1,2,3,6-tetrahydrophthalimidopropanoyl-5-fluorouracil (ETPFU), was synthesized by the reaction of 5-fluorouracil (5-FU) and 3,6-endo-methylene-1,2,3,6-tetrahydrophthalimidopropanoyl chloride (ETPC). The homopolymer of ETPFU and its copolymers with acrylic acid (AA) and vinyl acetate (VAc) were prepared by photopolymerizations. The synthesized ETPFU and polymers were identified by Fourier transfer infrared (FTIR), ¹H nuclear magnetic resonance (NMR), and ¹³C-NMR spectroscopies. The contents of ETPFU units in poly(ETPFU-co-AA) and poly(ETPFU-co-VAc) were 26 and 32 mol %, respectively. The number average molecular weights of the synthesized polymers determined by gel permeation chromatography (GPC) were in range from 8,800 to 10,700. The in vitro cytotoxicities of the samples were evaluated with mouse mammary carcinoma (FM3A), mouse leukemia (P388), and human histiocytic lymphoma (U937) as a cancer cell line and mouse liver cells (AC2F) as a normal cell line. The in vivo antitumor activities of polymers against Balb/c mice bearing the sarcoma 180 tumor cells were greater than those of 5-FU at all doses tested. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2113–2120, 1999