Polymer-Supported Tetrabromooxomolybdate(V): A New Type of Catalyst for Oxidation by t-Butyl Hydroperoxide

Tetrabromooxomolybdate(V) was immobilized in alkylammonium cation-type polymers obtained by the reaction of poly(p-chloromethyl-styrene-co-divinylbenzene-co-styrene) (abbreviated CMS) with amines and derived from poly(p-vinylpyridine) and poly(p-vinylpyridine-co-divinylbenzene). These immobilized polymers were active catalysts for the oxidation of alcohols and epoxidation of olefins with t-butyl hydroperoxide (abbreviated t-BuOOH). Among these polymers, we could find a polymer catalyst showing specificity, which was obtained by immobilization of tetrabromooxomolybdate(V) in the polymer derived from the reaction of CMS with trimethylamine. This immobilized polymer does not catalyze epoxidation of olefins but catalyzes oxidation of alcohols with t-BuOOH. Ammonium tetrabromooxomolybdate(V) complex was stabilized by the immobilization in the polymers, and it was found that the reactivity of the active group is due to the microenvironment supplied by the polymer chain.     

Preparing a functionalized thermoplastic elastomer—bromination and synthesis of poly(p-methylstyrene-co-styrene)-block-poly(ethylene-co-butene)-block-poly(p-methylstyrene-co-styrene)

A poly(p-methylstyrene-co-styrene)-block-poly(ethylene-co-butene)-block-poly(p-methylstyrene-co-styrene) thermoplastic elastomer was prepared via anionic synthesis of poly(p-methylstyrene-co-styrene)-block-polybutadiene-block-poly(p-methylstyrene-co-styrene) followed by a hydrogenation of the polybutadiene midblock. The sequential method used for the synthesis has resulted in a nearly monodispersed polymer with a polydispersity of 1.03. Bromination of such synthesized copolymer was next, conducted using two different methods. In the presence of a FeCl₃ catalyst in CCl₄ solvent, bromination occurred through forming a carbocationic complex to undergo an electrophilic substitution reaction on the aromatic rings of the end blocks. Nevertheless, the bromination occurred exclusively on the p-methyl groups of the end blocks when conducted in cyclohexane using photoinitiated free radicals. The microstructure of the brominated molecules were analyzed using ¹H-NMR and ¹³C-NMR, and bromination efficiencies of 48 and 44% have been attained from the two methods, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4108–4116, 1999     

High modulus ratio shape‐memory polymers achieved by combining hydrogen bonding with controlled crosslinking

A new type of poly(methyl acrylate)‐co‐(acrylic acid) (PMA‐AA) networks obtained by combining hydrogen bonding with controlled crosslinking exhibit full and rapid shape‐memory recovery. The structure, thermal properties, dynamical mechanical properties and shape‐memory effects of these networks were presented. High modulus ratios were achieved for the series of PMA‐AA networks based on intense self‐complementary hydrogen bonding in poly(acrylic acid) (PAA) segments. This lead to excellent shape‐memory effects with strain‐recovery ratio above 99%. Meanwhile, faster recovery speed was achieved by the synergistic effect of hydrogen bonding and controlled crosslinking compared to the linear PMA‐AA copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1241–1245, 2011     

Synthesis of an alkali‐swellable emulsion and its effect on the rate of polymer diffusion in poly(vinyl acetate‐butyl acrylate) latex films

We describe the synthesis and characterization of a weakly cross‐linked poly(methacrylic acid‐co‐ethyl acrylate) alkali‐swellable emulsion (ASE), as well as an investigation of its influence on the rate of polymer diffusion in latex films. The films examined were formed from poly(vinyl acetate‐co‐butyl acrylate) latex particles containing a small amount of acrylic acid as a comonomer. Polymer diffusion rates were monitored by the energy transfer technique. We found that the presence of the ASE component, either in the acid form or fully neutralized by ammonia or sodium hydroxide, had very little effect on the polymer diffusion rate. However, in the presence of 2 wt % NH₄‐ASE, there was a small but significant increase in the polymer diffusion rate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5632–5642, 2005     

Functionalization of crosslinked poly(4-vinylpyridine) and poly(4-vinylpyridine-co-styrene) with permanganate species: Preparation of poly(4-vinylpyridinium permanganate)s and their use as oxidizing reagents

Crosslinked poly(4-vinylpyridine) and poly(4-vinylpyridine-co-styrene) were functionalized with permanganate group to afford the corresponding poly[4-vinyl(pyridinium permanganate)] resin. These resins were found to selectively oxidize alcohols to corresponding carbonyl compounds. These insoluble functionalized polymers possess the desired characteristics of the polymeric reagents, including operational simplicity, filterability, and regenerability. The influence of solvent, duration of reaction, and molar excess of the reagent in these oxidation reactions was investigated to find out the optimum conditions for effective oxidation reactions. The reactions were found to be more facilitated in nonpolar solvents, and a large excess of the polymeric reagent did not have any significant effect on the extent of reactions. The poly[4-vinyl(pyridinium permanganate)] resin bears a contrast to KMnO₄ and other polymer-supported oxidizing agents like poly[4-vinyl(pyridinium chlorochromate)] in that it does not bring about the oxidation of the alcohol group directly attached to the ring structure.     

A novel route to poly(α-hydroxyacrylic acid) derivatives by the hydrolysis of polymers containing 1,3-dioxolan-4-one moiety

The alkali hydrolysis of poly(2,2-dimethyl-5-methylene-1,3-dioxolan-4-one) and poly(2,2-dimethyl-5-methylene-1,3-dioxolan-4-one-co-styrene) was carried out with a sodium hydroxide solution (40%) in tetrahydrofuran at room temperature to obtain poly(α-hydroxyacrylic acid) or poly(α-hydroxyacrylic acid-co-styrene) with number-average molecular weights of 39,000–73,000 in 41–86% yields. The styrene unit in the hydrolyzed copolymer hindered the formation of a lactone ring. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1629–1633, 2001     

Synthesis and characterization of grafted/crosslinked proton conducting membranes based on amphiphilic PVDF copolymer

A novel graft copolymer consisting of a poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) backbone and poly(glycidyl methacrylate) side chains, that is, P(VDF‐co‐CTFE)‐g‐PGMA, was synthesized through atom transfer radical polymerization (ATRP) using CTFE units as a macroinitiator. Successful synthesis and microphase‐separated structure of the polymer were confirmed by ¹H NMR, FTIR spectroscopy, and TEM. As‐synthesized P(VDF‐co‐CTFE)‐g‐PGMA copolymer was sulfonated by sodium bisulfite, followed by thermal crosslinking with sulfosuccinic acid (SA) via the esterification to produce grafted/crosslinked polymer electrolyte membranes. The IEC values continuously increased with increasing SA content but water uptake increased with SA content up to 10 wt %, above which it decreased again as a result of competitive effect between crosslinking and hydrophilicity of membranes. At 20 wt % of SA content, the proton conductivity reached 0.057 and 0.11 S/cm at 20 and 80 °C, respectively. The grafted/crosslinked P(VDF‐co‐CTFE)‐g‐PGMA/SA membranes exhibited good mechanical properties (>400 MPa of Young's modulus) and high thermal stability (up to 300 °C), as determined by a universal testing machine (UTM) and TGA, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1110–1117, 2010     

Synthesis of polymer microspheres functionalized with chiral ligand by precipitation polymerization and their application to asymmetric transfer hydrogenation

Monodisperse, crosslinked poly(divinylbenzene) and poly(methacrylic acid‐co‐ethylene glycol dimethacrylate) microspheres with (1R,2R)‐N¹‐toluenesulfonyl‐1,2‐diphenylethylene‐1,2‐diamine ((R,R)‐TsDPEN) moiety were successfully prepared by precipitation polymerization. Introduction site of the (R,R)‐TsDPEN moiety into the polymer microspheres could be controlled by changing the order of addition of the corresponding monomers. The functionalized polymer microspheres were applied to asymmetric transfer hydrogenation of ketone and imine. Polymer microsphere‐supported chiral catalysts showed good reactivity and enantioselectivity in the catalytic asymmetric transfer hydrogenations. Chiral secondary alcohol was quantitatively obtained with 94% ee in the asymmetric transfer hydrogenation of acetophenone in water. We also found that introduction site of the chiral catalyst and hydrophobicity of the microspheres, as well as degree of the crosslinking, affected the yield and enantioselectivity of chiral product in this reaction. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3340–3349, 2010     

Preparation of macroporous functionalized polymer beads by a multistep polymerization and their application in zirconocene catalysts for ethylene polymerization

Macroporous functionalized polymer beads of poly(4‐vinylpyridine‐co‐1,4‐divinylbenzene) [P(VPy‐co‐DVB)] were prepared by a multistep polymerization, including a polystyrene (PS) shape template by emulsifier‐free emulsion polymerization, linear PS seeds by staged template suspension polymerization, and macroporous functionalized polymer beads of P(VPy‐co‐DVB) by multistep seeded polymerization. The polymer beads, having a cellular texture, were made of many small, spherical particles. The bead size was 10–50 μm, and the pore size was 0.1–1.5 μm. The polymer beads were used as supports for zirconocene catalysts in ethylene polymerization. They were very different from traditional polymer supports. The polymer beads could be exfoliated to yield many spherical particles dispersed in the resulting polyethylene particles during ethylene polymerization. The influence of the polymer beads on the catalytic behavior of the supported catalyst and morphology of the resulting polyethylene was investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 873–880, 2003     

Thermosensitive and control release behavior of poly (N‐isopropylacrylamide‐co‐acrylic acid) latex particles

In this work, poly(N‐isopropylacrylamide‐co‐acrylic acid) (poly(NIPAAm‐AA)) copolymer latex particles (microgels) were synthesized by the method of soapless emulsion polymerization. Poly(NIPAAm‐AA) copolymer microgels have the property of being thermosensitive. The concentration of acrylic acid (AA) and crosslinking agent N,N′‐methylenebisacrylamide were important factors to influence the lower critical solution temperature (LCST) of poly(NIPAAm‐AA) microgels. The effects of AA and crosslinking agent on the swelling behavior of poly(NIPAAm‐AA) microgels were also studied. The poly(NIPAAm‐AA) copolymer microgels were then used as a thermosensitive drug carrier to load caffeine. The effects of concentration of AA and crosslinking agent on the control release of caffeine were investigated. How the AA content and crosslinking agent influenced the morphology and LCST of the microgels was discussed in detail. The relationship of morphology, swelling, and control release behavior of these thermosensitive microgels was established. A new scheme was proposed to interpret the control release of the microgels with different morphological structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5734–5741, 2008     

Synthesis of well‐defined polymers end‐functionalized with crosslinkable aziridine groups by living anionic polymerization

Well‐defined end‐functionalized polystyrene, poly(α‐methylstyrene), and polyisoprene with polymerizable aziridine groups were synthesized by the termination reactions of the anionic living polymers of styrene, α‐methylstyrene, and isoprene with 1‐[2‐(4‐chlorobutoxy)ethyl]aziridine in tetrahydrofuran at ?78 °C. The resulting polymers possessed the predicted molecular weights and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.1) as well as aziridine terminal moieties. The cationic ring‐opening polymerization of the ω‐monofunctionalized polystyrene having an aziridinyl group with Et₃OBF₄ gave the polymacromonomer, whereas the α,ω‐difunctional polystyrene underwent crosslinking reactions to afford an insoluble gel. Crosslinking products were similarly obtained by the reaction of the α,ω‐diaziridinyl polystyrene with poly(acrylic acid)‐co‐poly(butyl acrylate). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4126–4135, 2005     

From single‐chain folding to polymer nanoparticles via intramolecular quadruple hydrogen‐bonding interaction

Single‐chain folding via intramolecular noncovalent interaction is regarded as a facile mimicry of biomacromolecules. Single‐chain folding and intramolecular crosslinking is also an effective method to prepare polymer nanoparticles. In this study, poly(methyl methacrylate‐co?2‐ureido‐5‐deazapterines functionalized ethylene methacrylate) (P(MMA‐co‐EMA‐DeAP)) is synthesized via free radical polymerization. The single‐chain folding of P(MMA‐co‐EMA‐DeAP) and the formation of the nanoparticles in diluted solution (concentration <0.005 mg/mL) are achieved via supramolecular interaction and intramolecular collapsing during the disruption‐reformation process of the hydrogen bonding triggered by water. The size and the morphology of the nanoparticles are characterized by dynamic light scattering, transmission electron microscope, and atomic force microscope. The results show that the size of the nanoparticles depends on the molecular weight of the polymer and the loading of 2‐ureido‐5‐deazapterines functionalized ethylene methacrylate (EMA‐DeAP) on the polymer backbone. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1832–1840     

Surface functionalization of polymer latex particles. I. Catalytic oxidation of poly(methylstyrene) latex particles in the presence of an anionic surfactant

A facile synthesis of functionalized poly[3(4)-methylstyrene] (PMS) latex particles containing aldehyde and carboxylic acid groups was achieved via an emulsion polymerization of 3(4)-methylstyrene in the presence of sodium dodecyl sulfonate, followed by an in-situ oxidation catalyzed by copper(II) chloride and t-butyl hydroperoxide (t-BuOOH) in the presence of t-butyl alcohol (t-BuOH). The structure of the anionic surfactant, metal catalyst, organic solvent, oxidant, and their concentrations strongly affected the rate of oxidation and the stability of the emulsion. The average size of the polymer latex particles was found to increase after oxidation, and the polymer was slightly crosslinked. A free-radical mechanism is proposed involving metal-catalyzed decomposition of t-BuOOH and benzylic oxidation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1863–1872, 1997     

Synthesis and characteristics of poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite hollow latex particles and their application as drug carriers

In this work, the poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite hollow latex particles was synthesized by a three‐step reaction. The first step was to synthesize the poly(methyl methacrylate‐co‐methacrylic acid) (poly(MMA‐MAA)) copolymer latex particles by the method of soapless emulsion polymerization. The second step was to polymerize methacrylic acid (MAA), N‐isopropylacrylamide (NIPAAm), and N,N′‐methylenebisacrylamide in the presence of poly(MMA‐MAA) latex particles to form the linear poly(methyl methacrylate‐co‐methacrylic acid)/crosslinking poly(methacrylic acid‐co‐N‐isopropylacrylamide) (poly(MMA‐MAA)/poly(MAA‐NIPAAm)) core–shell latex particles. In the third step, the core–shell latex particles were heated in the presence of ammonia solution to form the crosslinking poly(MAA‐NIPAAm) thermosensitive hollow latex particles. The morphologies of poly(MMA‐MAA)/poly(MAA‐NIPAAm) core–shell latex particles and poly(MAA‐NIPAAm) hollow latex particles were observed. The influences of crosslinking agent and shell composition on the lower critical solution temperature of poly(MMA‐MAA)/poly(MAA‐NIPAAm) core–shell latex particles and poly(MAA‐NIPAAm) hollow latex particles were, respectively, studied. Besides, the poly(MAA‐NIPAAm) thermosensitive hollow latex particles were used as carriers to load with the model drug, caffeine. The effect of various variables on the amount of caffeine loading and the efficiency of caffeine release was investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5203–5214     

Raft mediated surface grafting of t‐butyl acrylate onto an ethylene–propylene copolymer initiated by gamma radiation

RAFT mediated grafting of poly(t‐butyl acrylate) onto the surface of a commercial poly(ethylene‐co‐propylene), Elpro, has been carried out using initiation by ⁶⁰Co γ‐radiation at 298 and 273 K. The polymerizations were in bulk monomer and using the RAFT agent 1‐phenylethyl phenyldithioacetate. The rates of homopolymerization and grafting were found to decrease with increasing RAFT agent concentration, indicating that both polymerization processes involve participation of the RAFT agent. There was good agreement between the predicted and experimental molecular weights of the homopolymer that had a narrow polydispersity. The poly(t‐butyl acrylate) grafts were hydrolyzed by trifluoroacetic acid to form poly(acrylic acid) grafts, which could either be further functionalized or used to control the surface polarity of the Elpro. ATR‐FTIR spectroscopy was used to characterize the grafts and Raman spectroscopy was used to assess the depth of the grafts. The water contact angle for the Elpro surface grafted with poly(acrylic acid) was found to be linearly dependent on the amount of the graft present. The living nature of the grafted chains was demonstrated by the addition of a second block of polystyrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1074–1083, 2007     

Triphase catalysis. II. Alkylation of phenylacetone with 1-bromobutane catalyzed by aqueous NaOH and polystyrene-supported benzyltriethyl ammonium chloride

Insoluble microporous polystyrene-bound benzyltriethyl ammonium chloride has been used as a catalyst in the alkylation of phenylacetone with 1-bromobutane, and the kinetics of this reaction was investigated under phase-transfer catalytic conditions. The observed reaction rates depend on many experimental parameters, viz., stirring speed, substrate amount, basicity of aqueous NaOH, amount of 1-bromobutane, temperature, order of addition of the reactants and particle size, percent active site, and percent crosslinking of the polymer. The rates are nearly 12 times higher at lower concentrations of base than at higher concentrations and do not vary appreciably with a variation in stirring speed from 200 to 700 rpm. The rate of alkylation increases with a decrease in the particle size of the catalyst and crosslinking of the polymer. Based on the results obtained, a suitable mechanism in which a combination of intraparticle diffusion and intrinsic reactivity limit the reaction rates has been proposed. © 1993 John Wiley & Sons, Inc.     

Copolymerization of ethene with styrene using different methylalumoxane activated half-sandwich complexes

Ethene was copolymerized with styrene using five different methylalumoxane (MAO) activated half-sandwich complexes of the general formula Me₂Si(Cp)(N R)MCl₂, varying the substituents on the cyclopentadienyl ring and the substituent on the amide (Cp = tetramethylcyclopentadiene CBT , 1-indenyl IBT , 3-trimethylsilyl-1-indenyl SIBT , or fluorenyl FBZ , R = tert-butyl (complexes CBT, IBT, SIBT, FBZ ) or benzyl CAT ), as well as the metal center (M = Ti, except FBZ : M = Zr). Polymerization behavior was analyzed with respect to catalyst activity and polymerization kinetics, styrene incorporation, copolymer microstructure, and molecular weight. All complexes produced random poly(ethene-co-styrene) without any regioregular or stereoregular microstructure. Complex CBT showed the highest catalytic activity, the fluorenyl-substituted complex FBZ produced the highest molecular weight polymer, and complexes SIBT and CAT promoted high styrene incorporation. Cp-substitution pattern influenced deactivation of the catalytic system with bulky substituents of the Cp-ring slowing down deactivation at the expense of styrene incorporation. Moreover, deactivation was accelerated with increasing styrene concentration. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1571–1578, 1997     

Microwave assisted hydroxyalkylamidation of poly(ethylene‐co‐acrylic acid) and formation of grafted poly(ϵ‐caprolactone) side chains

The microwave assisted amidation of poly(ethylene‐co‐acrylic acid) (PEAA) with 2‐(2‐aminoethoxy)ethanol was performed to yield a hydroxy functionalized poly(ethylene) based copolymer (PEAAOH) in a single step. PEAAOH was used as a polyinitiator for the ring‐opening polymerization of ε‐caprolactone. The obtained graft copolymers were studied via ¹H NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, polarized optical microscopy, and scanning electron microscopy. Microscopy methods show a crystallization behavior of banded spherulites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3659–3667, 2007     

Crosslinking polymerization leading to interpenetrating polymer network formation. I. Polyaddition crosslinking reactions of poly(methyl methacrylate‐co‐2‐methacryloyloxyethyl isocyanate)s with ethylene glycol resulting in polyurethane networks

At the start of our research program concerned with the elucidation of the crosslinking polymerization mechanism leading to interpenetrating polymer network (IPN) formation, in which IPNs consist of both polymethacrylates and polyurethane (PU) networks, this article deals with the polyaddition crosslinking reaction leading to PU network formation. Therefore, 2‐methacryloyloxyethyl isocyanate (MOI) was radically copolymerized with methyl methacrylate (MMA) in the presence of CBr₄ as a chain‐transfer agent. The resulting poly(MMA‐co‐MOI)s, having pendant isocyanate (NCO) groups as novel multifunctional polyisocyanates, were used for polyaddition crosslinking reactions with ethylene glycol as a typical diol. The second‐order rate constants depended on both the functionality of poly(MMA‐co‐MOI) and the NCO group concentration. The actual gel points were compared with the theoretical ones calculated according to Macosko's equation; the deviation of the actual gel point from the theoretical value became more remarkable for a greater functionality of poly(MMA‐co‐MOI) and at a lower NCO group concentration or at a lower poly(MMA‐co‐MOI) concentration. These are discussed mechanistically, with consideration given to the significance of intramolecular cyclization and intramolecular crosslinking reactions leading to the shrinkage of the molecular size of the prepolymer, along with the data of the intrinsic viscosities of resulting prepolymers and the swelling ratios of resulting gels. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 606–615, 2003     

Synthesis and Characterization of pH‐sensitive Poly(IA‐co‐AAc‐co‐AAm) Hydrogels via Frontal Polymerization

In this work, we report a series of poly(itaconic acid‐co‐acrylic acid‐co‐acrylamide) (poly(IA‐co‐AAc‐co‐AAm)) hydrogels via frontal polymerization (FP). FP starts on the top of the reaction mixture with aid of heating provided from soldering iron gun. Once polymerization initiated, no further energy is required to complete the process. The influences of IA/AAc weight ratios on frontal velocities, temperatures, and conversions on the reaction time are thoroughly investigated and discussed where the amount of AAm monomer remains constant. Fourier transform‐infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscope (SEM), dynamic mechanical analysis, and the swelling measurement are applied to characterize the as‐synthesized poly(IA‐co‐AAc‐co‐AAm) hydrogels. Interestingly, the swelling ratios of the hydrogels are changed with different IA/AAc contents, and the maximum swelling ratios are ~4439% in water. SEM images describe highly porous morphologies and explain good swelling capabilities. Moreover, the poly(IA‐co‐AAc‐co‐AAm) hydrogels exhibit superior pH‐responsive ability. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2214–2221