Method of determining the absolute molecular weight from gel permeation chromatograms for star‐shaped styrenic block copolymers

A gel permeation chromatography (GPC) calculation method has been developed to determine the absolute molecular weight of a star‐shaped styrenic block copolymer with GPC–ultraviolet/refractive index calibrated with linear polystyrene standards. To illustrate the simplicity of this method, we have synthesized nearly monodisperse, multiple‐arm model polymers either by linking living polymeric arms with multifunctional silicon halide or by oligomerizing the p‐chloromethylstyrene‐terminated polystyrene macromonomers. The good agreement between the absolute molecular weight determined with this calculation method and that actually measured with a multi‐angle laser light scattering device has corroborated the validity of the calculation method. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 976–983, 2003     

Synthesis and characterization of a multiarm star polymer

A multiarm star polymer was synthesized through the grafting of oligo polyglycol with urethane chain end units onto the core of hyperbranched polyglycerol (HPG), which was obtained through the cationic ring‐opening polymerization of glycidol. Samples were characterized with ¹³C NMR, liquid chromatography/mass spectrometry, vapor pressure osmometry, and Raman spectroscopy. The degree of branching of HPG was 0.54, and the number of arms grafting onto HPG was 4. The urethane of the arms mainly reacted with the terminal hydroxy groups of HPG. The differences between the spin–spin relaxation times indicated that the terminal segments of the star were more flexible than those of the core. Grafting polyglycol polyurethane (soft segments of polyurethane is polyglycol) onto HPG improved its dimensional stability. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2356–2364, 2004     

Synthesis and characterization of “Living” star‐shaped poly(N‐vinylcaprolactam) with four arms and carboxylic acid end groups

Poly(N‐vinylcaprolactam) (PNVCL) star‐shaped polymers with four arms and carboxyl end groups were synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization of N‐vinylcaprolactam (NVCL) employing a tetrafunctional trithiocarbonate as an R‐RAFT agent. The resulting star polymers were characterized using ¹H NMR, FT‐IR, gel permeation chromatography (GPC), and UV–vis. Molecular weight of star polymers were analyzed by GPC and UV–vis being observed that the values obtained were very similar. Furthermore, the thermosensitive behavior of the star polymers was studied in aqueous solution by measuring the lower critical solution temperature by dynamic light scattering. Star‐shaped PNVCL were chain extended with ethyl‐hexyl acrylate (EHA) to yield star PNVCL‐b‐PEHA copolymers with an EHA molar content between 4% and 6% proving the living character of the star‐shaped macroCTA. These star block copolymers form aggregates in aqueous solutions with a hydrodynamic diameter ranged from 170 to 225 nm. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2156–2165     

Star‐branched polystyrenes by nitroxide living free‐radical polymerization

Star‐branched polystyrenes, with polydispersity indices of 1.15–1.56 and 4–644 equal arms, were synthesized by the reaction of 2,2,6,6‐tetramethylpiperidin‐1‐yloxy (TEMPO)‐capped polystyrene (PS‐T) with divinylbenzene (DVB). The characterization of PS‐T and the final star polymers was carried out by size exclusion chromatography, low‐angle laser light scattering, and viscometry. The degree of branching of the star polymers depended on the DVB/PS‐T ratio and the PS‐T molecular weight. An asymmetric (or miktoarm) star homopolymer of the PS_nPS′_n type was made by the reaction of the PS_n symmetric star, which had n TEMPO molecules on its nucleus and consisted of a multifunctional initiator, with extra styrene. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 320–325, 2001     

Theoretical consideration of the molecular mass distribution of starlike polymers formed by attachment of linear polymers to dendritic cores

Star‐shaped polymers can be synthesized by condensation of linear polymers to dendritic cores. The distribution of molecular masses of such hybrid star polymers and the factors influencing it have been investigated by calculations based on population balance equations and Laplace transformations. Moreover, the expressions for numerical calculations of molecular mass distributions have been derived for both Poisson and Schultz–Zimm types of initial molecular mass distributions. According to the calculation results, the molecular mass distribution of the star polymers is strongly dependent on the distribution of the length of linear polymers. Beyond this, the molecular mass development is affected by several parameters that describe the reaction degree of dendritic cores, thus, by the fraction of all functional groups of dendritic cores involved in grafting, denoted by p; the average branching degree of one starlike molecule, represented by ρ; or the fraction of dendritic molecules becoming the cores of star polymers, expressed by p/ρ, provided the star molecule contains only one core. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2751–2758, 2001     

Synthesis of low polydispersity polybutadiene and polyethylene stars by convergent living anionic polymerization

Star‐shaped polybutadiene stars were synthesized by a convergent coupling of polybutadienyllithium with 4‐(chlorodimethylsilyl)styrene (CDMSS). CDMSS was added slowly and continuously to the living anionic chains until a stoichiometric equivalent was reached. Gel permeation chromatography‐multi‐angle laser light scattering (GPC‐MALLS) was used to determine the molecular weights and molecular weight distribution of the polybutadiene polymers. The number of arms incorporated into the star depended on the molecular weight of the initial chains and the rate of addition of the CDMSS. Low molecular weight polybutadiene arms (M_n = 640 g/mol) resulted in polybutadiene star polymers with an average of 12.6 arms, while higher molecular weight polybutadiene arms (M_n = 16,000 g/mol) resulted in polybutadiene star polymers with an average of 5.3 arms. The polybutadiene star polymers exhibited high 1,4‐polybutadiene microstructure (88.3–93.1%), and narrow molecular weight distributions (M_w/M_n = 1.11–1.20). Polybutadiene stars were subsequently hydrogenated by two methods, heterogeneous catalysis (catalytic hydrogenation using Pd/CaCO₃) or reaction with p‐toluenesulfonhydrazide (TSH), to transform the polybutadiene stars into polyethylene stars. The hydrogenation of the polybutadiene stars was found to be close to quantitative by ¹H NMR and FTIR spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 828–836, 2006     

Preparation of 3‐arm star polymers (A3) via Diels–Alder click reaction

Diels–Alder click reaction was successfully applied for the preparation of 3‐arm star polymers (A₃) using furan protected maleimide end‐functionalized polymers and trianthracene functional linking agent (2) at reflux temperature of toluene for 48 h. Well‐defined furan protected maleimide end‐functionalized polymers, poly (ethylene glycol), poly(methyl methacrylate), and poly(tert‐butyl acrylate) were obtained by esterification or atom transfer radical polymerization. Obtained star polymers were characterized via NMR and GPC (refractive index and triple detector detection). Splitting of GPC traces of the resulting polymer mixture notably displayed that Diels–Alder click reaction was a versatile and a reliable route for the preparation of A₃ star polymer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 302–313, 2008     

Synthesis and characterization of multiarm star-branched polyisobutylenes: Effect of arm molecular weight

A series of star-branched polyisobutylenes with varying arm molecular weights was synthesized using the 2-chloro-2,4,4-trimethylpentane/TiCl₄/pyridine initiating system and divinylbenzene (DVB) as a core-forming comonomer (linking agent). The resulting star-branched polymers were characterized with regard to the weight-average number of arms per star molecule (N̄_w) and dilute solution viscosity behavior. As the molecular weight of the arm (M̄_{w, arm}) was increased, dramatically longer star-forming reaction times were needed to produce fully developed star polymers. It was calculated that N̄_w varied from 50 to 5 as the M̄_{w, arm} was increased from 13,000 to 54,000 g/mol. The radius of gyration, R_g, of the star polymers was observed to increase as M̄_{w, arm} was increased. The solution properties of the star polymers were evaluated in heptane using dilute solution viscometry. It was determined that the stars had a much higher [η] compared to the respective linear PIB arms, but a much lower [η] compared to a hypothetical linear analog of an equivalent molecular weight. The dependence of [η] on temperature for the stars and linear arms was very small over the temperature range 25 to 75°C, with only a very slight decrease with increasing temperature. [η]_star was also determined to increase with increasing M̄_{w, arm}, but decrease with increasing M̄_{w, star}. The branching coefficient, g′, calculated for the stars at 25°C, increased as N̄_w decreased and agre ed well with literature values for other star polymer systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3767–3778, 1997     

Synthesis of PEG‐PNIPAM‐PLys hetero‐arm star polymer and its variation of thermo‐responsibility after the formation of polyelectrolyte complex micelles with PAA

A hetero‐arm star polymer, poly(ethylene glycol)‐poly(N‐isopropylacrylamide)‐poly(L‐lysine) (PEG‐PNIPAM‐PLys), was synthesized by “clicking” the azide group at the junction of PEG‐b‐PNIPAM diblock copolymer with the alkyne end‐group of poly(L‐lysine) (PLys) homopolymer via 1,3‐dipolar cycloaddition. The resultant polymer was characterized by gel permeation chromatography, proton nuclear magnetic resonance, and Fourier transform infrared spectroscopes. Surprisingly, the PNIPAM arm of this hetero‐arm star polymer nearly lose its thermal responsibility. It is found that stable polyelectrolyte complex micelles are formed when mixing the synthesized polymer with poly(acrylic acid) (PAA) in water. The resultant polyelectrolyte complex micelles are core‐shell spheres with the ion‐bonded PLys/PAA chains as core and the PEG and PNIPAM chains as shell. The PNIPAM shell is, as expected, thermally responsive. However, its lower critical solution temperature is shifted to 37.5 °C, presumably because of the existence of hydrophilic components in the micelles. Such star‐like PEG‐PNIPAM‐PLys polymer with different functional arms as well as its complexation with anionic polymers provides an excellent and well‐defined model for the design of nonviral vectors to deliver DNA, RNA, and anionic molecular medicines. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1450–1462, 2009     

Arm‐first synthesis of star polymers with polywedge arms using ring‐opening metathesis polymerization and bifunctional crosslinkers

This work presents a two‐step, one‐pot process to make star polymers with polywedge arms. In a one‐pot reaction, after the polywedge arms are synthesized, crosslinker species are added to the reaction, rapidly forming star polymers. Crosslinker species with different degrees of conformational freedom were designed and synthesized and their capacity to generate star polymers was evaluated. Mass conversions up to 92% and stars with up to 17 arms were synthesized with the most rigid crosslinker. The effects of arm molecular weight and molar ratio of crosslinker to arm on mass conversion and arms per star were explored further. Finally, the size‐molecular weight scaling relationship for polywedges with linear and star architectures was compared, corroborating theoretical results regarding star polymers with arms much larger than their core. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 732–740     

Star‐shaped siloxane polymers with various cyclic cores: Synthesis and properties

Six new star‐shaped polydimethylsiloxane (PDMS) with various cyclic siloxane cores were synthesized by the “grafting onto” method. The polymers obtained feature low dispersity and well‐defined structures. Two of them, Q ₈ ‐PDMS and D ₁₂ ‐PDMS , have a three‐dimensional spatial structure traditional for star‐shaped polymers where the arms are arranged in all directions from the branching center. The other four polymers, D ₄ ‐PDMS – D ₈ ‐PDMS , have quite a different spatial geometry (cis‐structure) where all the PDMS‐arms are arranged on one side of the branching center plane. Such star‐shaped structures were not reported before. The structures and purity of the polymers obtained were confirmed using a set of physicochemical methods of analysis. The effect of the macromolecule structure on the properties of the target polymers was identified. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Synthesis and characterization of a multiarm poly(acrylic acid) star polymer for application in sustained delivery of cisplatin and a nitric oxide prodrug

Functionalized polymeric nanocarriers have been recognized as drug delivery platforms for delivering therapeutic concentrations of chemotherapies. Of this category, star‐shaped multiarm polymers are emerging candidates for targeted delivery of anticancer drugs, due to their compact structure, narrow size distribution, large surface area, and high water solubility. In this study, we synthesized a multiarm poly(acrylic acid) star polymer via macromolecular design via the interchange (MADIX)/reversible addition fragmentation chain transfer (MADIX/RAFT) polymerization and characterized it using nuclear magnetic resonance (NMR) and size exclusion chromatography. The poly(acrylic acid) star polymer demonstrated excellent water solubility and extremely low viscosity, making it highly suited for targeted drug delivery. Subsequently, we selected a hydrophilic drug, cisplatin, and a hydrophobic nitric oxide (NO)‐donating prodrug, O²‐(2,4‐dinitrophenyl) 1‐[4‐(2‐hydroxy)ethyl]‐3‐methylpiperazin‐1‐yl]diazen‐1‐ium‐1,2‐diolate, as two model compounds to evaluate the feasibility of using poly(acrylic acid) star polymers for the delivery of chemotherapeutics. After synthesizing and characterizing two poly(acrylic acid) star polymer‐based nanoconjugates, poly(acrylic acid)–cisplatin (acid–Pt) and poly(acrylic acid–NO (acid–NO) prodrug, the in vitro drug release kinetics of both the acid–Pt and the acid–NO were determined at physiological conditions. In summary, we have designed and evaluated a polymeric nanocarrier for sustained‐delivery of chemotherapies, either as a single treatment or a combination therapy regimen. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation of poly(ethylene oxide) star polymers and poly(ethylene oxide)–polystyrene heteroarm star polymers by atom transfer radical polymerization

Poly(ethylene oxide) (PEO) star polymer with a microgel core was prepared by atom transfer radical poylmerization (ATRP) of divinyl benzene (DVB) with mono‐2‐bromoisobutyryl PEO ester as a macroinitiator. Several factors, such as the feed ratio of DVB to the initiator, type of catalysts, and purity of DVB, play important roles during star formation. The crosslinked poly(divinyl benzene) (PDVB) core was further obtained by the hydrolysis of PEO star to remove PEO arms. Size exclusion chromatography (SEC) traces revealed the bare core has a broad molecular weight distribution. PEO–polystyrene (PS) heteroarm star polymer was synthesized through grafting PS from the core of PEO star by another ATRP of styrene (St) because of the presence of initiating groups in the core inherited from PEO star. Characterizations by SEC, ¹H NMR, and DSC revealed the successful preparation of the target star copolymers. Scanning electron microscopy images suggested that PEO–PS heteroarm star can form spherical micelles in water/tetrahydrofuran mixture solvents, which further demonstrated the amphiphilic nature of the star polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2263–2271, 2004     

COMPARISON OF GPC AND THERMAL FIELDFLOW FRACTIONATION METHODS FOR LINEAR AND STAR BRANCHED POLYSTYRENE SAMPLES

The Thermal Field-Flow Fractionation (TFFF) method was used to determine the elution volumeof a series of star branched polystyrene having different number of arms but the same arm molecularweigh and polystyrene standards with narrow distribution whose molecular weight ranged from5.0×10~4 to 8.6×10~5. Results were obtained by measuring at two temperature difference (△T=30℃and △T=50℃in THF. The same star branched samples were measured by means of GPC method.Comparison of Vr-Mrelationships obtained from TFFF and GPC showed that the displacement of V_r-M curves for star and linear polystyrene is larger than that in GPC. This difference is caused by theentirely different mechanism of separation for these two methods. As the controlling factor is hy-drodynamic volume of the polymer chain in solution for GPC, it is the diffusion coefficient of polymermolecules for TFFF. The experimental results indicate that the influence of variance of chain struc-ture on diffusion coefficient is stronger than that on the hydrodynamic volume and that TFFF tech-nique may be used as a method for characterizing branching of polymer molecules. For this pur-pose a proper theoretical model and more accurate experiments are needed.     

星形偶联反应的动力学分析

<正> 链端带有一个官能团的聚合物与多官能团偶联剂之间的反应,是合成星形聚合物的主要途径之一。一些研究者已对上述反应作了统计分析。本文则严格求解了星形偶联反应的动力学微分方程组,得到了星形聚合物的各种分子参数与被偶联聚合物的分子参数之间的关系。     

Synthesis and characterization of multi-arm star-branched polyisobutylenes

Multi-arm star-branched polyisobutylenes were synthesized by the “arm-first, core-last” method using the 2-chloro-2,4,4-trimethylpentane/pyridine/TiCl₄ initiating system and the reactive core-forming comonomers 1,3-diisopropenylbenzene (DIPB) and divinylbenzene (DVB). Star formation was confirmed by RI and UV GPC and static light-scattering analyses. It was determined that DVB was significantly superior to DIPB. Using DVB, star polymers formed more rapidly and contained a much lower amount of residual PIB arms. Increasing the concentration of the reactive comonomer from 1 to 10 times the concentration of chain ends, [CE], increased the efficiency of the star-forming reaction substantially. Modest increases in the fraction of PIB arms incorporated into the star could be obtained by increasing the duration of the star-forming reaction. The timing of addition of the reactive comonomer to the PIB arms seems to be the process parameter most critical to the star development, since early addition at excessively low IB conversion hinders star formation by causing a copolymerization between IB and the core-forming comonomer. Late addition risks loss of a significant fraction of PIB chains due to spontaneous β-proton expulsion. A fully developed multi-arm star-branched PIB was synthesized by utilizing 10:1 [DVB]:[CE], 24 h star-forming reaction time, 14,000 g/mol target arm M_n, and addition of DVB at 99% IB conversion. The resultant star polymer contained only 4% unreacted PIB arms and possessed M_w = 345,000 g/mol by light scattering. The weight-average number of arms per star polymer was calculated to be 23. © 1996 John Wiley & Sons, Inc.     

Amphiphilic diblock star polymer catalysts via atom transfer radical polymerization

Diblock star polymers were synthesized via atom transfer radical polymerization from a palladium porphyrin macroinitiator. The arms of the star polymers had an amphiphilic design, with the central Pd-porphyrin surrounded by a relatively hydrophobic block of poly(butyl acrylate) and terminated by a hydrophilic block of poly(oligoethyleneglycol monomethylether monomethacrylate). The size of both the interior and exterior blocks of the polymer arms were tuned over a wide range of molecular weights with the exterior block used to solubilize the stars in polar media. The star polymers showed enhanced reactivity in the oxidation of 2-furaldehyde relative to a small molecule porphyrin, suggesting that the polymer backbone aids with catalytic turnover. Oxygen diffusion studies indicate that the polymer backbone shields the porphyrin excited state from oxygen quenching. Shielding is independent of molecular weight and polymer composition, but it is not pronounced enough to retard the rate of singlet oxygen generation under preparative photooxidation conditions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4939–4951, 2006     

Polymers from renewable resources. XXI. Semi-interpenetrating polymer networks based on cardanol-formaldehyde-substituted aromatic compounds copolymerized resins and castor oil polyurethanes: Synthesis,structure, scanning electron microscopy and XRD

Substituted aromatic compounds incorporated–cardanol–formaldehyde novolac resins were synthesized by acid base catalyzed reactions. A number of improved high temperature stable interpenetrating polymer networks (semi-IPNs) were prepared by condensing novolac resins and polyurethanes prepared from castor oil and diisocyanates of varying NCO/OH ratio. The structure of these semi-IPNs were studied using various characterization techniques such as IR, nuclear magnetic resonance (NMR) spectra. The scanning electron microscopy of some of the semi-IPNs have been studied and the morphology has been examined. The samples were subjected to wide angle X-ray diffraction analysis. The degree of crystallinity (X_cr) was computed on the basis of the crystal defect concept, developed by Ruland and Vonk. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3117–3124, 1997     

Dendrimers as scaffolds for multifunctional reversible addition–fragmentation chain transfer agents: Syntheses and polymerization

The synthesis and characterization of novel first‐ and second‐generation true dendritic reversible addition–fragmentation chain transfer (RAFT) agents carrying 6 or 12 pendant 3‐benzylsulfanylthiocarbonylsulfanylpropionic acid RAFT end groups with Z‐group architecture based on 1,1,1‐hydroxyphenyl ethane and trimethylolpropane cores are described in detail. The multifunctional dendritic RAFT agents have been used to prepare star polymers of poly(butyl acrylate) (PBA) and polystyrene (PS) of narrow polydispersities (1.4 < polydispersity index < 1.1 for PBA and 1.5 < polydispersity index < 1.3 for PS) via bulk free‐radical polymerization at 60 °C. The novel dendrimer‐based multifunctional RAFT agents effect an efficient living polymerization process, as evidenced by the linear evolution of the number‐average molecular weight (M_n) with the monomer–polymer conversion, yielding star polymers with molecular weights of up to M_n = 160,000 g mol^?1 for PBA (based on a linear PBA calibration) and up to M_n = 70,000 g mol^?1 for PS (based on a linear PS calibration). A structural change in the chemical nature of the dendritic core (i.e., 1,1,1‐hydroxyphenyl ethane vs trimethylolpropane) has no influence on the observed molecular weight distributions. The star‐shaped structure of the generated polymers has been confirmed through the cleavage of the pendant arms off the core of the star‐shaped polymeric materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5877–5890, 2004