Development and validation of HPTLC and green HPLC methods for determination of furosemide,spironolactone and canrenone,in pure forms,tablets and spiked human plasma

Two selective and accurate chromatographic methods are presented for simultaneous quantitation of spironolactone (SP) and furosemide (FR) and canrenone (CN), the main degradation product and the main active metabolite of SP. Method A was HPTLC, where separation was completed on silica gel HPTLC F₂₅₄ plates using ethyl acetate–triethylamine–acetic acid (9:0.7:0.5, by volume) as a developing system and UV detection at 254 nm. Method B was a green isocratic RP‐HPLC utilizing a C₁₈ (4.6 × 100 mm) column, the mobile phase consisting of ethanol–deionized water (45: 55, v/v) and UV estimation at 254 nm. Adjustment of flow rate at 1 mL/min and pH at 3.5 with glacial acetic acid was done. Regarding the greenness profile, the proposed RP‐HPLC method is greener than the reported one. ICH guidelines were followed to validate the developed methods. Successful applications of the developed methods were revealed by simultaneous determination of FR, SP and CN in pure forms and plasma samples in the ranges of 0.2–2, 0.05–2.6 and 0.05–2 μg/band for method A and 5–60, 2–60 and 2–60 μg/mL for method B for FR, SP and CN, respectively.     

Studies on Synthesis and Effect of Dopants on Conductivity and Morphology of Organically Soluble Poly(o-anisidine)

Synthesis of poly(o-anisidine) doped with various protonic acids by using ammonium persulphate as oxidizing agent were carried out in aqueous acid media. Influences of protonic acids on the physicochemical properties were investigated. The various process parameters were optimized to obtain poly(o-anisidine) in the conducting salt phase form. The results are discussed with references to different protonic acids. It was observed that poly(o-anisidine) is highly soluble in organic solvents, such as m-cresol and N-methyl pyrrolidinone (NMP). The polymers were characterized by UV-Visible, FTIR, SEM, XRD and conductivity measurements. A result shows that, different types of dopant acids HCl, H₂SO₄ and HClO₄ affect the morphology and electrical conductivity of the polymer. The electrical conductivity of the polymer follows the order HCl >H₂SO₄>HClO₄. Thus the effect of dopant ion type and the size of its negative ions influence the physico-chemical properties. UV-Vis absorption spectra shows peaks at 740–783 nm with shoulder at 380–420 nm as characteristic peaks for the emeraldine salt (ES) phase of poly(o-anisidine) POA. The FTIR spectra show a broad and intense band at ～2800–3001 cm^?1 and ～1159–1170 cm^?1 that account for the formation of ES phase of the polymer. The X-ray diffraction spectra show a characteristic peak at 20–30^o, 2θ range which reveals partial crystalline structure. The conductivity of the poly(o-anisidne) salt was found to be in the range of 10^?3 to 10^?2 S/cm. SEM studies of poly(o-anisidine) doped with HCl shows the continuous granular uniform morphology with sub-micrometer evenly distributed particles of size ～100–200 nm.     

Photo‐switchable spiropyran immobilized polystyrene beads using catechol chemistry

Catechol and spiropyran functional groups were conjugated to a polymer backbone, allowing immobilization on polystyrene beads (PS beads). The final product was capable of stably reproducing the optical properties of spiropyran. Through the outstanding surface adhesion properties of the catechol functional group, spiropyran was immobilized on PS beads. Switchable photoluminescence in the spiropyran coated PS bead surfaces was observed depending on irradiation with either UV or visible light. The surfaces of the PS beads were morphologically examined by field emission scanning electron microscopy and X‐ray photoelectron spectroscopy was used for characterization of the constituent atoms. Furthermore, UV–Vis and fluorescence spectroscopy were used to confirm conversion between the spiropyran (SP) and merocyanine (MC) forms through UV or visible light irradiation on SP, while fluorescent images for both SP and MC were studied using confocal laser scanning microscopy. The confocal images of the SP‐PS beads system onto MDAMB‐231 cells under UV and visible light indicate the cellular uptake by emerging color within the cytoplasm. Advancing study, the remaining catechol groups can confers adhesive properties, given by contact angle data of various coated surfaces film. These stimuli‐responsive coatings are compatible as drawing switchable photochromic material on versatile substrate shown in confocal images of propylene film. Overall, this great water solubility and biocompatibility PS beads system also showed potential as cell bio‐imaging light stimuli responsive material, and the benefits of this system can also possibly address coat able advanced material for a wide range of surface light sensor applications. Copyright © 2017 John Wiley & Sons, Ltd.     

Comparative studies of solid‐state synthesized poly(o‐methoxyaniline) and poly (o‐toluidine)

Poly(o‐methoxyaniline) (POMA) and poly(o‐toluidine) (POT) salts doped with different acids (methanesulphonic acid (MeSA), trifluoroacetic acid (TFA), and hydrochloric acid (HCl)) were synthesized by using solid‐state polymerization method. The polymers were characterized by Fourier transform infrared (FTIR) spectra, ultraviolet–visible (UV–Vis) spectrometry, X‐ray diffraction (XRD), cyclic voltammetry (CV), and conductivity measurements. Transmission electron microscopy (TEM) was done to study the morphologies of POMA and POT salts. The FTIR and UV‐Vis absorption spectra revealed that the reduced phase was predominant in POMA salts, and the pernigraniline phase was predominant in POT salts. It was found that POMA salts displayed higher doping level and conductivity. In contrast, POT salts were lower at doping levels and conductivity. In accordance with these results, the electrochemical activity was also found to be lower in POT salts. The XRD patterns showed that the POMA salts displayed higher crystallinity than POT salts. The results from TEM revealed that the morphologies of POMA salts were different from those of POT salts. Copyright © 2008 John Wiley & Sons, Ltd.     

Physicochemical study of the ‘anatase/electrolyte solution’ interface in suspension and closely packed particles of the solid

The electric double layer (EDL) developed at the interface of anatase in contact with aqueous electrolyte solutions was investigated at 25 °C. Potentiometric titrations (PT), measurements of the electrophoretic mobility (EM) in suspensions, and streaming potential (SP) measurements were taken. The surface charge over a wide pH range (ca. 3–10) and the point of zero charge (pzc = 6.3 ± 0.1) of anatase was easily determined by means of the suspension titration curve and the blank one, obtained at a single ionic strength value. Streaming potential measurements were conducted in anatase particles appropriately packed to form plugs. Two different plugs were prepared differing in the degree of particles' packing and, consequently, in the respective porosities. It was found that surface conductivity is lower at higher packing (lower porosity), because of the reduction of the total surface area in contact with the electrolyte. Moreover, it was found that the surface conductivity of the anatase samples increased at pH values away from pzc, while the mobility of the counter ions behind the shear plane decreased. This trend was attributed to the increase of the absolute surface charge. This increase caused an increase in the amount of the counter ions and, therefore, in the conductivity due to these ions. On the other hand, stronger electrostatic interactions between the surface of the solid and the counter ions reduced their mobility. The packing density of the anatase particles in the respective plugs, affected the values of ζ‐potential calculated from SP measurements when the effect of surface conductivity was neglected. Copyright © 2010 John Wiley & Sons, Ltd.     

Sol–gel Al2O3 powders—matrix in solar thermal absorbers

Porous alumina powders for solar thermal applications, prepared by sol–gel were comparatively investigated, starting from an organo-metallic precursor (aluminum isopropoxide) and an inorganic precursor (aluminum chloride hexahydrate). As morphology controlling agents, HCl and poly (ethylene glycol) were added in the precursor solutions. X-Ray Diffraction, Atomic Force Microscopy, Differential Scanning Calorimetry, Fourier Transform Infrared Spectra and UV–VIS-NIR spectroscopy were used to characterize the materials. The chemical composition, the phase structure and morphological properties are influenced by the additive type and by the heat treatment temperature. The results shows that optimized conditions lead to high quality matrix for solar-thermal absorbers, with absorptance in the visible region varying from 0.13 to 0.47 and low thermal emittance (ε_T = 0.02–0.09) in the infrared region of the solar spectrum.     

Study the effect of inorganic salts on the chemically polymerized aniline films using quartz crystal microbalance

The chemical oxidation of aniline with ammonium peroxydisulfate to form polyaniline (PANI) films has been studied in different aqueous acid mediums such as HCl, HNO₃, and H₂SO₄. The yield and the growth rate of the PANI film deposition were measured using the quartz crystal microbalance (QCM) technique. The effect of different salts such as KCl, NaNO₃, and K₂SO₄ and their concentration on the yield and the growth rate of the film formation are investigated. The yield of PANI film deposition depends on the acid used and the type of salts as well as their concentrations. When HCl and HNO₃ were used as media, the addition of salts with the same anion has no effect. However, when H₂SO₄ was used as media, the addition of salts with the same anions as the medium enhances the yield of PANI film deposition. The UV–visible spectra of the produced PANI films in the absence and presence of the salts are also studied. Copyright © 2007 John Wiley & Sons, Ltd.     

Cobalt(II)–metformin complexes containing α‐diimine/α‐diamine as auxiliary ligand: DNA binding properties

The cobalt(II) complexes [Co(Cl)₂(met)(o‐phen)] ( 1 ), [Co(Cl)₂(en)(met)] ( 2 ) and [Co(Cl)₂(met)(opda)] ( 3 ) (met = metformin, o‐phen = ortho‐phenanthroline, en = ethylenediamine, opda = ortho‐phenylenediamine) were synthesized and characterized using liquid chromatography–mass spectrometry, elemental analysis, molar conductance measurements, thermal analysis, infrared spectroscopy, magnetic moment measurements, electronic spectroscopy and X‐ray diffraction. The metal centre was found to be in an octahedral geometry. UV–visible absorption, fluorescence and viscosity measurements were conducted to assess the interaction of the complexes with calf thymus DNA. The complexes showed absorption hyperchromism in UV–visible spectra with DNA. The binding constants from UV–visible absorption studies were 1.38 × 10⁵, 2.1 × 10⁵ and 3.1 × 10⁵ M^?1 for 1 , 2 and 3 , respectively, and Stern–Volmer quenching constants from fluorescence studies were 0.146, 0.176 and 0.475, respectively. Viscosity measurements revealed that the binding of the complexes with DNA could be surface binding, mainly due to groove binding. The activities of the complexes in DNA cleavage decrease in the order 3 > 2 > 1 . The complexes were docked into DNA topoisomerase II using Discovery Studio 2.1 software.     

Synthesis and characterization of binary and ternary oxovanadium complexes of N,N′‐(2‐pyridyl)thiourea and curcumin: Catalytic oxidation potential,antibacterial, antimicrobial,antioxidant and DNA interaction studies

Two binary and two ternary mono‐oxovanadium (IV) complexes of acetylacetonate, curcumin and N ,N ′‐bis(2‐pyridyl)thiourea were synthesized. They were characterized using elemental analysis, infrared and UV–visible spectroscopies and magnetic and conductivity measurements. The formation constants K _f were determined from spectrophotometric measurements. The catalytic potential of the VO complexes was investigated for the oxidation of 1‐octene by aqueous H₂O₂ in acetonitrile. They display high catalytic potential for the conversion of 1‐octene with low chemoselectivity to the epoxy product. The VO complexes exhibit good antibacterial and antimicrobial activities. The antioxidant activity of the VO complexes and their ligands was investigated. The VO complexes show high DNA affinity and DNA cleavage ability.     

Alternating π‐conjugated copolymer of dithiafulvene with 2,2′‐bipyridyl units

A π‐conjugated polymer containing a dithiafulvene unit and a bipyridyl unit was prepared by cycloaddition polymerization of aldothioketene derived from 5,5′‐diethynyl‐2,2′‐bipyridine. Ultraviolet–visible (UV–vis) absorption spectra showed that the π‐conjugation system of the polymer expanded more effectively than that of a benzene analogue of poly(dithiafulvene) obtained from 1,4‐diethynylbenzene. Cyclic voltammetry measurements indicated that the dithiafulvene–bipyridyl polymer was a weaker electron‐donor polymer than the benzene analogue. These results supported the idea that the incorporation of the electron‐accepting bipyridyl moiety into conjugated poly(dithiafulvene) induced an intramolecular charge‐transfer (CT) effect between the units. Treatment of the dithiafulvene–bipyridyl polymer with bis(2,2′‐bipyridyl)dichlororuthenium (II) [Ru(bpy)₂Cl₂] afforded a ruthenium–polymer complex. A cyclic voltammogram of the complex showed broad redox peaks, which indicated electronic interaction between the dithiafulvene and tris(bipyridyl) ruthenium complex. The dithiafulvene–bipyridyl polymer formed CT complexes with 7,7,8,8‐tetracycanoquinodimethane (TCNQ) in dimethyl sulfoxide. The UV–vis absorption indicated that the resulting CT complex contained anion radical of TCNQ and partially charge‐transferred TCNQ. The polymer showed an unusually high electrical conductivity of 3.1 × 10^?4 S/cm in its nondoped state due to the effective donor–acceptor interaction between the bipyridine unit and the dithiafulvene unit. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4083–4090, 2001     

Formation of Tc metal in 12 M HCl using Zn as a reductant

Amorphous TcO₂ and NH₄TcO₄ solubilized into 12 M HCl will spontaneously convert to hexachlorotechnetate (TcCl₆ ^2?). This process is accelerated upon heating but species lower than Tc(IV) are not generated by this action. TcCl₆ ^2? is kinetically unstable with regards to formation in solutions of low concentrations of HCl and will spontaneously convert back to soluble and insoluble forms of Tc(IV) in water. TcCl₆ ^2? in 12 M HCl placed in contact with the reducing metal Zn at elevated temperatures (90 °C) forms a black precipitate that contains amorphous Tc metal, TcO₂, and oxy-chlorides of Tc. Powder X-ray diffraction indicates the presence of Tc metal after thermal treatment where X-ray absorption fine structure spectroscopy indicates the presence of hexagonal Tc metal and amorphous TcO₂ in the precipitate after rinsing with 12 HCl but before thermal treatment. The resulting solution contains a mixture of Tc chlorides and oxy-chlorides following reduction where TcCl₆ ^2? is completely consumed resulting primarily in Tc₂OCl₁₀ ^4? dominating the UV–visible spectra. Reducing the solution volume and reconstituting the products into 12 M HCl while boiling the mixed solution (>24 h) will slowly convert all soluble Tc back to TcCl₆ ^2?. Expanding on previous efforts made in this laboratory to recover Tc metal from aqueous solution, we investigate its synthesis when Tc(IV) and Tc(VII) in 12 M HCl is placed in contact with the reducing metal (i.e., Zn) at elevated temperatures.     

Photocatalytic performance of silver-modified TiO2 embedded in poly(ethyl-acrylate-co-methyl metacrylate) matrix

The plasmonic Ag-TiO₂ (with 0.5 wt% Ag) photocatalyst was prepared on P25 TiO₂ surface. The presence of AgNPs on the titania was indicated by the UV–vis spectrum, which showed a plasmonic absorbance band in the visible range (λ _max?=?455 nm). XPS measurements suggested that Ag was in metallic (Ag) and in oxide forms on TiO₂. Ag-TiO₂ photocatalyst and TiO₂ were embedded in [poly(ethyl acrylate-co-methyl methacrylate; p(EA-co-MMA)] copolymer to attain mechanically stable, photocatalytically active nanocomposite films. The photooxidation of ethanol was slower on the photocatalyst/polymer nanocomposites, but it could be significantly improved by irradiating them with UV light. The photoaging was applied as a post-preparation treatment to improve the photocatalytic activity of the nanocomposite films. Changed surface morphology and the partial destruction of the polymer were supported by AFM and FTIR results. Contact angle measurements were used to determine the surface free energies of the prepared and the photoaged nanocomposite films.     

A combined spectroscopic and light scattering study of hydrolysis of uranium(VI) leading to colloid formation in aqueous solutions

This study mainly focuses hydrolysis reactions of uranium(VI) under an ambient atmosphere leading to colloid formation in near neutral solution using light scattering, UV–Vis and FTIR-ATR studies. UV–Vis and IR spectrum was recorded for uranyl solution at different pH range. U(VI) hydrolyzed colloids were detected and it was confirmed by the appearance of a band at 941 cm^?1 in the IR spectra. Light scattering measurements were performed on colloidal U(VI) solutions formed at pH range of 7–8. The average particle diameter was determined as 32–36 nm using dynamic light scattering. Well defined colloidal species are formed with no considerable change in particle size with increasing U(VI) concentration. The weight average molecular weight of colloidal species was predicted as 763 Da by Debye plot. The second virial coefficient (A₂) was found to be ?0.1139 ml g^?1 Da. The present study confirms that behaviour of U(VI) contradicts conventional Zr(IV), Th(IV) and Pu(IV) solution chemistry. U(VI) polymerization is less extensive and in neutral solutions it forms only oligomers with 2–3 uranyl units.     

The influence of various deposition techniques on the photoelectrochemical properties of the titanium dioxide thin film

Thin sol–gel TiO₂ layers deposited on the conductive ITO glass by means of three various deposition techniques (dip-coating, inkjet printing and spray-coating) were used as photoanode in the three-compartment electrochemical cell. The thin TiO₂ films were treated at 450 °C and after calcination all samples possessed the crystallographic form of anatase. The relationship between surface structure and photo-induced conductivity of the nanostructured layers was investigated. It was found that the used deposition method significantly influenced the structural properties of prepared layers; mainly, the formation of defects and their quantity in the prepared films. The surface properties of the calcined layers were determined by XRD, Raman spectroscopy, SEM, AFM, UV–Vis analyses and by the optical microscopy. The photo-induced properties of nanoparticulate TiO₂/ITO photoanode were studied by electrochemical measurements combined with UV irradiation.     

Biological screening and DNA nuclease activity of transition metal complexes of N2O2 type of Knoevenagel condensate Schiff base

A novel tetradentate N₂O₂ type of Knoevenagel condensate Schiff base, synthesized from 4‐amino‐2,3‐dimethyl‐1‐phenyl‐3‐pyrazolin‐5‐one (4‐aminoantipyrine) and 3‐(cinnamyl)‐pentane‐2,4‐dione, forms stable complexes with transition metal ions such as Cu(II), Co(II), Ni(II) and Zn(II). The structural features were derived from elemental analysis, molar conductance measurements, infrared, UV–visible, ¹H NMR, ¹³C NMR, mass and electron paramagnetic resonance spectroscopies. These complexes show high conductance values, supporting their electrolytic nature. Spectroscopic and other analytical data of the complexes suggest square planar geometry. In vitro calf thymus DNA binding studies were performed by employing UV–visible absorption spectroscopy, viscometry and cyclic voltammetry. These techniques indicate that all the metal complexes bind to DNA via intercalation mode. Antimicrobial screening of the synthesized ligand and complexes was conducted against Gram‐positive bacteria, Gram‐negative bacteria and fungi. These complexes exhibit higher antimicrobial activities than the free Schiff base, as investigated using the minimum inhibitory concentration method. Gel electrophoresis reveals that these complexes also promote the cleavage of pUC18 plasmid DNA in the presence of activators. Copyright © 2016 John Wiley & Sons, Ltd.     

Electrical properties of sulfonated polyether ether ketone/polyetherimide blend membranes doped with inorganic acids

The influence of blending with polyetherimide (PEI) and doping with HCl and H₃PO₄ on the properties of sulfonated polyether ether ketone (SPEEK) was studied. Blending with PEI first results in an increase and then in a decrease in membrane swelling at PEI concentrations greater than 5%. The electrical conductivity of blend membranes follows the same trend. Doping with the acids enhances the conductivity several times, and the effect of doping with HCl is more significant. PEI forms spherical particles dispersed in the SPEEK matrix and, at the same time, partially dissolves in SPEEK, which reduces the swelling of the matrix at higher PEI concentrations. The increase in the membrane capacity to absorb water at small PEI contents is due to the formation of new water adsorption sites along the interface between the particles and the matrix. A modified effective medium model yielded calculated results in good agreement with the measured conductivity values, when the experimental absorption data were used in the simulation. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1386–1395, 2000     

Synthesis,spectroscopic and thermodynamic studies of new transition metal complexes with N,N′-bis(2-hydroxynaphthalin-1-carbaldehydene)-1,2-bis(m-aminophenoxy)ethane and their determination by spectrophotometric methods

A novel tetradentate N₂O₂-type Schiff base, synthesized from 1,2-bis(m-aminophenoxy)ethane and 2-hydroxynaphthalin-1-carbaldehyde, forms stable complexes with transition metal ions such as Cu(II), VO(IV) and Zn(II) in DMF. Microanalytical data, elemental analysis, magnetic measurements, UV, visible and IR spectra as well as conductance measurements were used to confirm the structures. The stability constants of these complexes in 60% (v/v) DMF–water were determined at different ionic strengths (0.07,?0.13,?0.2?M) and at different temperatures (45,?50,?55,?60?±?0.1°C) using a spectrophotometric method. From these constants, thermodynamic stability constants and thermodynamic parameters (ΔG?⁰, ΔH?⁰, ΔS?⁰) were calculated. The values of enthalpy change are negative for all systems. The acid dissociation constant of the ligand, investigated in 60% (v/v) DMF–water, has also been calculated at different temperatures.     

Water Soluble Nickel – metformin ternary complexes: Thermal,DNA binding and molecular docking studies

The Nickel (II) complexes [Ni(Cl)₂(metf)(o-phen)] (1), [Ni(Cl)₂(metf)(opda)] (2) , [Ni(Cl)₂(metf)(en)] (3) , [Ni(Cl)₂(metf)(2,2'-bipy)] (4) , (metf = metformin, o-phen = ortho-phenanthroline, opda = ortho-phenylenediamine, en = ethylenediamine, 2–2′ bipy = 2–2′ bipyridyl) were synthesized and characterized using LC–MS, elemental analysis, molar conductance measurements, TGA-DTA, IR spectroscopy, magnetic moment measurements and electronic spectroscopy. The central Ni²⁺ was found to be in octahedral geometry. The DNA interaction of these complexes have been studied by UV–visible absorption studies, fluorescence emission technique and viscosity measurement. The complexes showed absorption hyperchromism in UV–visible spectra with calf thymus DNA. The binding constants from UV–visible absorption studies were 7.42 × 10⁴, 0.74 × 10⁴, 3.19 × 10⁴, 5.9 × 10⁴ M⁻¹ for 1 , 2 , 3 and 4 , respectively and Stern-Volmer quenching constants from fluorescence studies were 0.16, 0.41, 0.23, 0.18, respectively. Viscosity measurements revealed that the binding of the complexes with DNA could be surface binding, mainly due to groove binding. The highest DNA cleavage activity of the complexes is recorded for complex 1 . The complexes were docked in to B-DNA sequence, 5′(D*AP*CP*CP*GP*AP*CP* GP*TP*CP*GP*GP*T)-3′ retrieved from protein data bank (PDB ID: 423D), using Discovery Studio 2.1 software. C Docker Intectraction energy of 1 , 2 , 3 and 4 complexes is 32.027, 31.427, 35.393 and 30.521 respectively. The highest docking score is seen for complex 3 .     

Preparation of mesoporous TiO2/CNT nanocomposites by synthesis of mesoporous titania via EISA and their photocatalytic degradation under visible light irradiation

Stabilized mesoporous TiO₂ was synthesized by evaporation induced self assembly (EISA) method and mechanically incorporated into single-walled carbon nanotubes (SWCNT) with different ratios. The physicochemical properties of the nanocomposites (mesoporous TiO₂/SWCNT) materials were investigated by Brunauer–Emmett–Teller (BET) measurement, X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray (EDX), photoluminescence (PL) and ultraviolet–visible (UV–Vis) spectroscopy measurements. The catalytic activity of mesoporous TiO₂ and nanocomposites were assessed by examining the degradation of rhodamine B as model aqueous solution under visible light. CNTs are facilitating the photocatalytic activity of mesoporous TiO₂ in the degradation of rhodamine B efficiently.     

Electrochemical and optical properties of novel donor‐acceptor thiophene‐perylene‐thiophene polymers

In this study, donor‐acceptor type thiophene‐perylene‐thiophene monomers were synthesized and polymerized by both oxidative polymerization using FeCl₃ as catalyst and the electrochemical process. UV–vis, FTIR, ¹H NMR, and elemental analysis techniques were used for structural characterization. Thermal behaviors of these compounds were determined by using TGA system. The highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energy levels and electrochemical and optical band gap values were calculated by using the results of cyclic voltammetry and UV–vis measurements, respectively. The number–average molecular weight (M_n), weight–average molecular weight (M_w), and polydispersity index (PDI) values of synthesized polymers were determined by size exclusion chromatography. Conductivity measurements of these polymers were carried out by electrometer by using a four‐point probe technique. The conductivity was observed to be increased by iodine doping. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1974–1989, 2008