Synthesis and properties of copolymers of ethylene/carbon monoxide with styrene/carbon monoxide

The terpolymerization of ethylene, styrene, and carbon monoxide was accomplished by two different palladium‐based catalysts: a phosphine‐based ligand system and a nitrogen‐based ligand system. The range of possible compositions and the composition dependence of the properties of the resulting polymers were determined. These polymers were essentially carbon monoxide versions of the ethylene styrene interpolymers recently presented by Dow. A comparison between the two families of polymers is attempted. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 752–757, 2000     

Rare‐earth‐catalyzed alternating copolymerization of carbon monoxide with styrene

Rare‐earth acetates were used to catalyze the copolymerization reaction of carbon monoxide and styrene. Cupric acetate, 1,10‐phenanthroline, p‐toluenesulfonic acid, and 1,4‐benzoquinone were also added to the catalyst system. The structures of the copolymers obtained were characterized with IR, ¹H NMR, ¹³C NMR, wide‐angle X‐ray diffraction, and elemental analysis methods. The relationship between the catalytic activity and the catalyst composition was studied in detail. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 642–649, 2002; DOI 10.1002/pola.10147     

二氧化碳-氧化苯乙烯的共聚反应

由ＣＯ２－氧化苯乙烯（ＳｔＯ）配位催化共聚制得脂肪族聚碳酸苯亚乙酯,并用 ＩＲ、１ＨＮＭＲ和 ＤＳＣ等进行表征,用 ＴＧ对聚合物的热稳定性进行了分析。     

Thermal behaviour of binary and ternary copolymers containing acrylonitrile

Three types of acrylonitrile copolymers (acrylonitrile-styrene-butadiene copolymer (ABS¹), acrylonitrile-styrene random copolymer (SAN²) and acrylonitrile-butadiene random copolymer (BAN³) were studied by thermogravimetry (TG/DTG⁴) and by pyrolysis in a semi-batch process at 450 °C in order to find structure–thermal behaviour relationships. The overlapped thermo-oxidative degradation processes were separated and the corresponding kinetic parameters were calculated. The TG/DTG studies have evidenced that the styrene-acrylonitrile interactions stabilize the nitrile groups reacting by chain scission rather than cyclization and destabilize the styrene units. Also, the cyclization of the acrylonitrile units in ABS is favoured by interactions with the styrene and butadiene units. The pyrolysis behaviour evidenced that the styrene-acrylonitrile interactions in SAN and ABS lead to the formation of 4-phenylbutyronitrile as the most important decomposition compound. ABS shows similar composition of the degradation oil with SAN copolymer therefore in the ABS the styrene-butadiene interactions are less important than those between styrene and acrylonitrile units.     

Enantioselective,alternating copolymerization of carbon monoxide and olefins

Enantioselective, alternating copolymerizations of carbon monoxide with styrene, dicyclopentadiene, and methylcyclopentadiene dimer were carried out with a palladium catalyst modified by 1,4‐3,6‐dianhydro‐2,5‐dideoxy‐2,5‐bis(diphenyl phosphino)‐L ‐iditol. Chiral diphosphine was proven to be effective at enantioselective copolymerization. In the copolymers, some of the second double bonds of alternating poly(1,4‐ketone) were carbonylated. Optical rotation, elemental analysis, and spectra of ¹H NMR, ¹³C NMR, and IR showed that the copolymers had isotactic, alternating poly(1,4‐ketone) structures. An oxidant and an organic acid were the promoters of the copolymerization. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2919–2924, 2000     

Synthesis,polymerization, and effects on the flame retardancy of boron‐containing styrenic monomers

A boron‐containing styrenic monomer, 5‐benzyl‐2‐phenyl‐5‐(4‐vinylbenzyl)‐[1,3,2]‐dioxaborinane, was synthesized to study the influence of boron on the properties of the homopolymer and copolymer with styrene. A similar monomer without boron was also prepared and polymerized so that the properties of its polymer could be compared with the aforementioned boron‐containing polymers. These monomers were characterized by elemental analysis, mass spectrometry, Fourier transform infrared, and ¹H and ¹³C NMR. The thermal degradation of boron‐containing styrenic polymers was studied by means of Fourier transform infrared, which showed the presence of boric acid as char. The flame‐retardant effect was assessed by the measurement of the limiting oxygen indices and char yields during heating in nitrogen and air. The boron‐containing polymers had higher limiting oxygen indices and gave greater yields of char than those without boron. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem43: 6419–6430, 2005     

Combining atom‐transfer radical polymerization and ring‐opening polymerization through bifunctional initiators derived from hydroxy benzyl alcohol—Preparation and characterization of initiators,macroinitiators, and block copolymers

A simple, one‐step procedure has been developed for the preparation of bifunctional initiators capable of polymerizing monomers suitable for atom‐transfer radical polymerization (ATRP) and ring‐opening polymerization (ROP). These bifunctional initiators were employed for making narrow disperse poly(styrene) macroinitiators, which were subsequently used for the ROP of various lactides to yield poly(styrene‐block‐lactide) copolymers. Thermogravimetric analysis (TGA) of these block copolymers are interesting in that it shows a two‐step degradation curve with the first step corresponding to the degradation of poly(lactide) segment and the second step associated with the poly(styrene) segment of the block copolymer. This nature of the block copolymer makes it possible to estimate the block copolymer content by TGA in addition to the ¹H NMR spectroscopic analysis. Thus, this study for the first time highlights the possibility of making porous materials by thermal means which are otherwise obtained by base hydrolysis. The bifunctional initiators were prepared by the esterification of 3‐hydroxy, 4‐hydroxy, and 3,5‐dihydroxy benzyl alcohols with α‐bromoisobutyryl bromide and 2‐bromobutyryl bromide. A mixture of products was obtained, which were purified by column chromatography. The esterified benzyl alcohols were employed in the polymerization of styrene under copper (Cu)‐catalyzed ATRP conditions to yield macroinitiators with low polydispersity. These macroinitiators were subsequently used in the ROP of L ‐, DL ‐, and mixture of lactides. The formation of block copolymers was confirmed by gel permeation chromatography (GPC), spectroscopic and thermal characterizations. The molecular weight of the block copolymers was always higher than the macroinitiator, and the GPC chromatogram was symmetrical indicating the uniform initiation of ROP by the macroinitiators. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 102–116, 2008     

Novel emulsion graft copolymerization onto the silylmethyl group of poly(dimethylsiloxane)

The influence of radical initiators upon the emulsion graft copolymerization of styrene and acrylonitrile onto poly(dimethylsiloxane) (PDMS) was studied. As initiators, a series of peroxides and hydroperoxides were coupled with ferrous sulfate, among which the tert-butyl peroxylaurate system gave the highest grafting efficiency (30%). The tert-butyl peroxylaurate initiator fulfills the criteria for efficient radical grafting by generating only the tert-butoxy radical, which is reluctant to form a carbon radical via β-scission, being highly hydrophobic, and not carrying a tertiary hydrogen that may be abstracted by a radical. ¹³C-NMR analysis of the products showed that the grafting occurred on the silylmethyl groups of PDMS to give 10–25 grafts per polymer and graft ratio in the range 44–140%. The PDMS graft copolymers thus obtained could be used as surface-modifying agents to improve the lubricity and water-repellency of ABS [poly(styrene-co-acrylonitrile)-graft-polybutadiene]. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2607–2617, 1997     

Reactive surfactants in heterophase polymerization. VIII. Emulsion polymerization of alkyl sulfopropyl maleate polymerizable surfactants (surfmers) with styrene

The copolymerization of styrene with two polymerizable surfactants (surfmers) based on maleic acid (dodecyl sodium sulfopropyl maleate and tetradecyl sodium sulfopropyl maleate) was studied in batch emulsion polymerizations. The surfmer conversion was obtained by serum replacement with water and subsequent analysis of the recovered, unreacted surfmers with two-phase titration. It was found that both surfmers copolymerized well with styrene and their partial conversion was higher than that of styrene. These results are contradictory to what was found before in the literature using ultrafiltration with methanol, and the differences are explained on the basis of oligomer formation: The oligomers formed are detected if the latices are washed with methanol. It was found that at the end of the polymerization (almost complete conversion of both styrene and surfmer) only 45% of the surfmer groups were present on the particle surface, which is in agreement with a high conversion of the surfmer at the beginning of the reaction. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2561–2568, 1997     

Characterization of poly(styrene‐co‐methacrylonitrile)s obtained by low‐temperature radiation polymerization and thermal degradation behavior measured by Py‐GC and CRTG

Poly(styrene‐co‐methacrylonitrile)s were polymerized in solutions with different polarities (n‐hexane and THF) by low‐temperature γ‐ray irradiation polymerization in a temperature range of −83.6–30 °C. It was found by IR measurement that the composition of the copolymers changed remarkably due to the effects of the polarity of solvents and the polymerization temperature. The thermal degradation behavior in the flash pyrolysis and in the continuous heating pyrolysis of these copolymers was measured by Py‐GC and controlled rate thermogravimetry (CRTG). The effects of the copolymer composition and sequence distribution on the thermal degradation behavior were investigated. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3569–3577, 2000     

Synthesis and characterization of copolyperoxides of indene with styrene, α‐methylstyrene,and α‐phenylstyrene

The oxidative copolymerization of indene with styrene, α‐methylstyrene, and α‐phenylstyrene is investigated. Copolyperoxides of different compositions have been synthesized by the free‐radical‐initiated oxidative copolymerization of indene with vinyl monomers. The compositions of the copolyperoxides obtained from the ¹H and ¹³C NMR spectra have been used to determine the reactivity ratios of the monomers. The reactivity ratios indicate that indene forms an ideal copolyperoxide with styrene and α‐methylstyrene and alternating copolyperoxides with α‐phenylstyrene. Thermal degradation studies via differential scanning calorimetry and electron‐impact mass spectroscopy support the alternating peroxide units in the copolyperoxide chain. The activation energy for thermal degradation suggests that the degradation is dependent on the dissociation of the peroxide (? O? O? ) bonds in the backbone of the copolyperoxide chain. Their flexibility has been examined in terms of the glass‐transition temperature. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2004–2017, 2002     

Reaction of polyperoxides with triphenylphosphine

The triphenylphosphine deoxygenation of the polyperoxides, poly(styrene peroxide), poly(methyl methacrylate peroxide), and poly(α-methylstyrene peroxide) proceed via the phosphorane intermediates, which in the presence of moisture hydrolyze to give the respective diols. At higher temperatures and under dry conditions the phosphorane decomposes into epoxide and triphenylphosphine oxide. The reaction has been studied by ¹H-, ¹³C-, and ³¹P-NMR spectroscopy. The results obtained are consistent with a concerted insertion of the biphile, triphenylphosphine, into the peroxy bond and this reaction pathway seems to be new as far as the chemistry of polyperoxides is concerned. Though the aim of this investigation was to test the selective deoxygenation of polyperoxide by triphenylphosphine as a method of preparing polyethers, it turned out to be a fruitful method of synthesis of stereospecific diols. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1167–1172, 1997     

Evolved Gas Analysis of Some Solid Fuels by TG-FTIR

FTIR spectrometry combined with TG provides information regarding mass changes in a sample and permits qualitative identification of the gases evolved during thermal degradation. Various fuels were studied: coal, peat, wood chips, bark, reed canary grass and municipal solid waste. The gases evolved in a TG analyser were transferred to the FTIR via a heated teflon line. The spectra and thermoanalytical curves indicated that the major gases evolved were carbon dioxide and water, while there were many minor gases, e.g. carbon monoxide, methane, ethane, methanol, ethanol, formic acid, acetic acid and formaldehyde. Separate evolved gas spectra also revealed the release of ammonia from biomasses and peat. Sulphur dioxide and nitric oxide were found in some cases. The evolution of the minor gases and water parallelled the first step in the TG curve. Solid fuels dried at 100°C mainly lost water and a little ammonia. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis of catalytically active polymer-bound Schiff base manganese complexes for selective epoxidation of unfunctionalized olefins

A polymerizable unsymmetric tetradentate Schiff base with one vinyl group 3 was synthesized and copolymerized with styrene in toluene. Mn(III) ion was quantitatively incorporated into the copolymers by the functional moieties. The resulting linear polymer-bound manganese complexes ( 4a ′ and 4b ′) were used as catalyst under homogeneous condition for selective epoxidation of unfunctionalized olefins (i.e. styrene, α-methylstyrene and cyclohexene) at room temperature in the presence of iodosylbenzene (PhIO) as the terminal oxidant. The efficacy of epoxidation using the polymeric catalysts was comparable to that of the monomolecular analog. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3249–3254, 1997     

Polymer–polymer interactions via analog calorimetry. 3. Interaction between styrene and acrylonitrile repeat units

Analog calorimetry is used to study the interaction between styrene and acrylonitrile repeat units. Electrostatic charge calculations were used as a guide to divide the polymer repeat units and analogs into groups. A mean-field binary interaction model was used to evaluate group interaction energies. The enthalpic interaction energy for the styrene-acrylonitrile pair from this study is 7.63 ± 0.12 cal/cm³ which is consistent with values obtained from phase behavior studies of poly(styrene-co-acrylonitrile) blends. The cyano group, C(TRIPLE BOND)N, of the acrylonitrile repeat unit has a permanent dipole. The results of this study suggest that the orientation of this dipole with respect to the backbone of the acrylonitrile unit strongly affects its interaction with styrene repeat unit. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 831–839, 1997     

Carbonylative Heck reactions using CO generated ex situ in a two-chamber system

A carbonylative Heck reaction of aryl iodides and styrene derivatives employing a two-chamber system using a stable, crystalline, and nontransition metal based carbon monoxide source is reported. By applying near-stoichiometric amounts of the carbon monoxide precursor, an effective exploitation of the hazardous CO gas is obtained affording chalcone derivatives in good yields. Application to isotope labeling, incorporating (13)CO, was further established.     

Characterization and degradation of the poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymer

Poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymers (PSXE-g-PMMA) were prepared by condensation reaction of poly(methylphenylsiloxane)-containing epoxy resin (PSXE) with carboxyl-terminated poly(methyl methacrylate) (PMMA), and they were characterized by gel permeation chromatography (GPC), infrared (IR), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The microstructure of the PSXE-g-PMMA graft copolymer was investigated by proton spin–spin relaxation T₂ measurements. The thermal stability and apparent activation energy for thermal degradation of these copolymers were studied by thermogravimetry and compared with unmodified PMMA. The incorporation of poly(methylphenylsiloxane) segments in graft copolymers improved thermal stability of PMMA and enhanced the activation energy for thermal degradation of PMMA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2521–2530, 1998     

High molecular weight monodisperse polystyrene microspheres prepared by dispersion polymerization,using a novel bifunctional macromonomer

A novel bifunctional vinyl‐terminated polyurethane macromonomer was applied to the dispersion polymerization of styrene in ethanol. Monodisperse polystyrene (PS) microspheres were successfully obtained above 15 wt % of macromonomer relative to styrene. The steep slope from the reduction of the average particle size reveals that the macromonomer can efficiently stabilize higher surface area of the particles when compared with a conventional stabilizer, poly(N‐vinylpyrrolidone). The stable and monodisperse PS microspheres having the weight‐average diameter of 1.2 μm and a good uniformity of 1.01 were obtained with 20 wt % polyurethane macromonomer. The grafting ratio of the PS calculated from ¹H NMR spectra linearly increased up to 0.048 with 20 wt % of the macromonomer. In addition, the high molecular weights (501,300 g/mol) of PS with increased glass transition and enhanced thermal degradation temperature were obtained. Thus, these results suggest that the bifunctional vinyl‐terminated polyurethane macromonomer acts as a reactive stabilizer, which gives polyurethane‐grafted PS with a high molecular weight. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3566–3573, 2005     

Thermal degradation of copolymers based on selected alkyl methacrylates

The thermal stability and thermal degradation of copolymers based on selected alkyl methacrylates at temperatures between 250 and 400?°C have been studied using pyrolysis?Cgas chromatography. The type and composition of thermal degradation products gave useful information about the mechanism of pyrolysis of copolymers synthesized by using typical commercially available alkyl methacrylates. It was observed that the main thermal degradation products from alkyl methacrylate copolymers are monomers of alkyl methacrylates using by synthesis. Other pyrolysis by-products formed during thermal degradation were carbon dioxide, carbon monoxide, methane, ethane, methanol, ethanol, and propanol-1.     

Metallocene-catalyzed ethene/styrene co- and terpolymerization with olefinic termonomers

Ethene was co- and terpolymerized with 1-octene and styrene using the methylalumoxane (MAO) activated halfsandwich metallocene Me₂Si(Me₄Cp)(N-t.-butyl)TiCl₂(Cp = cyclopentadienyl, Me = methyl) as catalyst. At temperatures of 40 and 60°C styrene concentration was varied in order to investigate the influence of the comonomers. Despite decreasing the overall activity with respect to ethene/1-octene copolymerization, polymerization activity was found to exibit a relative maximum with increasing styrene concentration. An explanation is given taking two different comonomer effects into account. Low styrene concentration promoted higher 1-octene incorporation compared to ethene/1-octene copolymerization but significantly lowered the molecular weight of the terpolymers. With constant ethene and 1-octene concentration it was possible to produce ethene/1-octene/styrene terpolymers with styrene content varying from 0 to 25 mol % and 1-octene content varying from 8 to 21 mol %. All terpolymers were amorphous. With constant ethene content it was found possible to vary their glass transition temperature with 1-octene/styrene molar ratio incorporated in the terpolymer. ¹³C-NMR spectroscopic microstructure analysis showed that no styrene/1-octene sequences were found in the terpolymer backbone. Furthermore terpolymerizations were conducted successfully incorporating norbornene, 1,5-hexadiene and propene as monomers in terpolymertization with ethene and styrene. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2549–2560, 1997