Curing of liquid crystalline epoxy resins with a biguanide

This work extends the authors' investigations on liquid crystalline epoxy resins prepared from diglycidyl ether of 4,4′-dihydroxybiphenyl (DGE-DHBP) and aliphatic dicarboxylic compounds (ADC) or difunctional aromatic compounds. Syntheses and properties of these liquid crystalline epoxy resins are described elsewhere. In this paper a study on the curing reaction of the above mentioned liquid crystalline epoxy resins is presented. Ortho-tolylbiguanide was applied as the curing agent. The curing reactions were investigated by differential scanning calorimetry, microscopic observations and IR spectroscopy. Depending upon the temperature program of curing, it was possible to obtain polymeric networks with liquid crystalline order. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2739–2745, 1997     

Liquid crystalline conjugated polymers and their applications in organic electronics

This article describes the syntheses and electro‐optical applications of liquid crystalline (LC) conjugated polymers, for example, poly(p‐phenylenevinylene), polyfluorene, polythiophene, and other conjugated polymers. The polymerization involves several mechanisms: the Gilch route, Heck coupling, or Knoevenagel condensation for poly(p‐phenylenevinylene)s, the Suzuki‐ or Yamamoto‐coupling reaction for polyfluorenes, and miscellaneous coupling reactions for other conjugated polymers. These LC conjugated polymers are classified into two types: conjugated main chain polymers with long alkyl side chains, namely main‐chain type LC polymers, and conjugated polymers grafting with mesogenic side groups, namely side‐chain type LC conjugated polymers. In general, the former shows higher transition temperature and only nematic phase; the latter possesses lower transition temperature and more mesophases, for example, smectic and nematic phases, depending on the structure of mesogenic side chains. The fully conjugated main chain promises them as good candidates for polarized electroluminescent or field‐effect devices. The polarized emission can be obtained by surface rubbing or thermal annealing in liquid crystalline phase, with maximum dichroic ratio more than 20. In addition, conjugated oligomers with LC properties are also included and discussed in this article. Several oligo‐fluorene derivatives show outstanding polarized emission properties and potential use in LCD backlight application. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2713–2733, 2009     

Effect of droplet size on the dielectric properties of PDLC films

Polymer dispersed liquid crystal (PDLC) films (5CB/PMMA, 60/40) of different droplet size were prepared by a solvent-induced phase separation method under different N₂ flow speeds. The effects of droplet size on the thermal transitions of the LC and various dielectric properties such as dielectric constant, conductance, dielectric loss, and the electric field induced in a droplet were examined. The configuration of the LC in the film with smaller droplets can be identified by comparing the dielectric constant of the film with the one predicted by Boettcher's mixture formula. In addition, the effect of droplet size on the electro-optical response of the PDLC film was investigated. Variations of the conductance and the dielectric constant of the film were analyzed under various AC frequencies, with the purpose of elucidating the polarization mechanism of the LC molecules in the droplet. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1373–1381, 1997     

Morphology of anisotropic polymer-dispersed liquid crystals and the effect of monomer functionality

The morphology of transmission gratings with varying Bragg spacings formed using polymer-dispersed liquid crystals were examined using high-resolution scanning electron microscopy and image analysis techniques. The effect on the morphology of small changes in the overall functionality of the prepolymer syrup was observed. An increase in the amount of monofunctional compound resulted in small, nearly spherical domains (<100 nm in diameter) confined in well-defined lamellae for samples with a 0.49 μm Bragg spacing. A decrease in concentration (an effective increase in monomer functionality) at this Bragg spacing resulted in larger domains (100–200 nm) with much greater distribution of sizes and shapes. The local volume fractions of discrete liquid crystalline (LC) domains was considerably larger in the latter case. An increase in the Bragg spacing to 1.35 μm also resulted in well-defined lamellae of LC domains, although much more coalescence into irregularly shaped individual domains was observed. Surprisingly, the local volume fraction of LC increased in the larger Bragg spacing samples. The morphology results are discussed qualitatively in terms of liquid–gel demixing where the inherent crosslink density and elasticity of the polymeric host must be considered in phase separation processes on the nanoscale. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2825–2833, 1997     

Synthesis of side chain liquid crystalline copolymers and characterization of their polar structure

A series of side chain liquid crystalline copolymers having different spacer lengths, copolymer compositions, and chromophore types were synthesized and characterized both in the bulk and at the gas‐water interface. Liquid crystalline properties were identified by differential scanning calorimetry (DSC), optical microscopy, and X‐ray diffraction (XRD). Copolymer with spacer lengths 4, 5, 10, and 11 showed smectic A (S_A) phases with a bâtonnet texture. The liquid crystalline (LC) phase stabilized as the spacer increased. Copolymers with different compositions were investigated both as monolayers and transferred films. The isotherms suggest nanodomain formation at the gas‐water interface in copolymers with high nitrobiphenyl (NBP) content. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1057–1070, 1999     

The effect of the curing agent content on the curing and liquid‐crystalline phase of liquid‐crystalline epoxy resin

The effect of the curing agent content on the curing behavior and liquid‐crystalline (LC) phase of the liquid‐crystalline epoxy (LCE) resin 4,4′‐di(2,3‐epoxypropyloxy)phenyl benzoate was studied. Diaminodiphenylester (DDE) was used as a curing agent. The curing behavior was observed via differential scanning calorimetry, and the LC phase was investigated with a polarized optical microscopy. The LC phase in the LCE/DDE mixture with a high DDE content was developed during curing. The onset time was inversely proportional to the DDE content. The mesophase stability of LCE/DDE was enhanced by the addition of large amounts of DDE. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 374–379, 2001     

Influence of different linkage groups in biphenyl mesogenic core on phase behaviors of mesogen‐jacketed liquid crystalline polymers

The work focuses on the design, synthesis, and characterization of a series of mesogen‐jacketed liquid crystalline polymers (MJLCPs) based on the octyl substituted biphenyl mesogenic core through different linkage groups. The molecular characterizations of the polymers obtained by conventional free radical polymerization were performed with ¹H NMR, gel permeation chromatography, and thermogravimetric analysis. Their thermotropic liquid crystalline (LC) behaviors were investigated in detail by a combination of various techniques, such as polarized light microscopy, differential scanning calorimetry, and 1D and 2D wide‐angle X‐ray diffraction. Our results showed that all the polymers were thermally stable, and their LC phases were greatly dependent on the linking groups between the biphenyl mesogenic core and terminal alkyl group substituent. Polymers with ether/ester or ether linkage group exhibited an unusual phase behavior with temperature increasing, tetragonal columnar nematic LC phase, or columnar nematic phase developed at high temperatures for the polymers transformed into amorphous phase during cooling process, showing a re‐entrant phase behaviors. However, polymers with ester linkage group were not LC with temperature varied. It is illustrated that subtle changes in the molecular structure brought about tremendous variation of the LC phase properties for MJLCPs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2545–2554     

The electrorheology of rigid rod poly(n-hexyl isocyanate) solutions

The electroviscosities of solutions of a lyotropic liquid crystalline polymer, poly(n-hexyl isocyanate), were investigated by a slit viscometer. The morphologies of the solutions being studied include the isotropic, the biphasic, and the fully liquid crystalline. All three morphologies exhibit viscosity enhancements with imposition of an electric field. However, the electrorheological behavior of the isotropic solution is different from those of other morphologies. The isotropic solution starts with a higher field free viscosity and its electroviscosity increases gradually with the increasing electric field strength. In contrast, the anisotropic solutions begin with lower zero field viscosities and the electroviscosities increase sluggishly until a critical field strength is reached; the viscosities then increase rapidly and finally exceed that of the isotropic solution. For the morphologies of the biphasic and the fully liquid crystalline, the dependence of the viscosity enhancements on field strength and shear rate can be described by a single variable. The variable scales with the square of the electric field strength and the reciprocal of the shear rate. By introducing the effect of the molecular permanent dipole moments into Doi's theory, the electrorheological effects of PHIC solutions can be satisfactorily interpreted. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1217–1224, 1997     

Evolution of structure and properties of a liquid crystalline epoxy during curing

The evolution of structure, and thermal and dynamic mechanical properties of a liquid crystalline epoxy during curing has been studied with differential scanning calorimetry (DSC), polarized optical microscopy, x-ray scattering, and dynamic mechanical analysis. The liquid crystalline epoxy was the diglycidyl ether of 4,4′-dihydroxy-α-methylstilbene (DGEDHMS). Two curing agents were used in this study: a di-functional amine, the aniline adduct of DGEDHMS, and a tetra-functional sulfonamido amine, sulfanilamide. The effects of curing agent, cure time, and cure temperature have been investigated. Isothermal curing of the liquid crystalline epoxy with the di-functional amine and the tetra-functional sulfonamido amine causes an increase in the mesophase stability of the liquid crystalline epoxy resin. The curing also leads to various liquid crystalline textures, depending on the curing agent and cure temperature. These textures coarsen during the isothermal curing. Moreover, curing with both curing agents results in a layered structure with mesogenic units aligned perpendicular to the layer surfaces. The layer thickness decreases with cure temperature for the systems cured with the tetra-functional curing agent. The glass transition temperature of the cured networks rises with increasing cure temperature due to the increased crosslink density. The shear modulus of the cured networks shows a strong temperature dependence. However, it does not change appreciably with cure temperature. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 2363–2378, 1997     

Low temperature polymerization of novel,monotropic liquid crystalline benzoxazines

Cationic ring opening polymerization at a lower temperature range/faster polymerization than ordinary benzoxazine resins has been achieved without added initiators or catalysts via liquid crystalline (LC) benzoxazine resins. Faster polymerization is observed even above the liquid crystal forming temperature. The FTIR spectra show that opening of the oxazine ring occurs even at 110 °C generating phenolic groups that auto‐catalyzed the cationic polymerization of the monomer increasing the rate of polymerization. The newly formed H‐bonds inhibit the formation of LC phases after polymerization. Some of the monomers show nematic LC transitions upon cooling. None of them showed LC transitions during the heating cycle, exhibiting monotropic LC phases. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5871–5881, 2009     

Relationship between fracture toughness and domain size of liquid‐crystalline epoxy resins having polydomain structure

A liquid‐crystalline (LC) epoxy resin was cured at different temperatures and some types of curing systems having different phase structures (isotropic or polydomain, which have a microscopically ordered LC network structure) were obtained. The diameters of each domain in the polydomain system changed from the small to the larger size. The diameters of the LC domains were evaluated using a polarized optical microscope and the polarized microscopy FTIR mapping method. These systems were used to investigate the relationship between the network arrangement and mechanical properties. The fracture toughness of the cured systems was related to the enlargement of the ordered area in the network structures. With the toughness improvement, the meandering cracks were observed at the fracture surfaces. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 156–165, 2009     

Synthesis,characterization, and photoreaction of photoreactive liquid crystalline block copolyetheresters

Photo-crosslinkable thermotropic liquid crystalline block copolyetheresters with photoreactive hard segment of poly(hexamethylene p-phenylenediacrylate) and soft segment of poly(tetramethylene ether) were synthesized by melt polycondensation from n-butyl-p-phenylenediacrylate, hexamethylene glycol, and poly(tetramethylene ether) glycol (PTMG, M_n = 1000–3000). The influence of molecular weight and composition of PTMG unit on the thermal behavior was determined by differential scanning calorimetry and polarized optical microscopy. All synthesized block copolymers show thermotropic liquid crystalline phase and can photo-crosslink by UV irradiation. Photoreaction of the copolymer thin film was carried out using Hg-UV light and investigated by FT–IR spectroscopy and a dynamic viscoelastic analyzer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1849–1855, 1997     

Effect of lateral substituents on the mesomorphic properties of side-chain liquid crystalline polysiloxanes containing 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate side groups

The synthesis of side-chain liquid crystalline polysiloxanes containing either 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate or laterally fluoro-, chloro-, bromo-, and methoxy-substituted 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate mesogenic side groups is presented. The mesomorphic properties of the synthesized polymers have been characterized by optical polarizing microscopy, differential scanning calorimetry, and X-ray diffraction measurements. The effects of spacer length and lateral substituent on the mesomorphic properties of the obtained polymers are examined. The five polymers which contain three methylene units in the spacers show no mesophase, while the five polymers which contain eleven methylene units in the spacer display smectic mesomorphism. Among the other fifteen polymers which contain respectively four, five, or six methylene units in the spacers, those with small fluoro and chloro substituents reveal respectively an S_A phase, while those with bulky bromo and methoxy substituents show no liquid crystalline behavior. The experimental results demonstrate that introducing a bulky lateral substituent into the mesogenic core of a polymer depresses the tendency to form a mesophase. Furthermore, the technique of thermally stimulated current has been used to study the dipolar relaxation mechanisms in a side-chain liquid crystalline polysiloxane. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2793–2800, 1997     

Twin liquid crystals and segmented thermotropic polyesters containing azobenzene—effect of spacer length on LC properties

We report systematic studies on a homologous series of twin liquid crystalline (LC) molecules based on phenyl and naphthyl azobenzene ( PnP and NpnNp ) as well as segmented copolyesters based on them. The twin series had the structure azobenzene–oligooxyethylene–azobenzene, where the ethyleneoxy length was varied from 2 to 6 units. The LC properties of the twin series depended on the chemical structure of the azochromophore and also the length of the central oligooxyethylene segment. The PnP series exhibited smectic LC properties for n > three oligooxyethylene units. Conversely, NpnNp series exhibited spherulitic phases only for the shortest member – Np2Np . One non‐LC short spacer twin ( P2P ) and one LC long spacer twin ( P6P ) were incorporated as part of a main chain polyester composed of fully aliphatic segments of sebacate and di or tetraethylene glycol (DEG/TEG) units by melt polycondensation. Non‐LC P2P formed LC polymers even at low (5 mol %) incorporation in DEG‐based copolymers, whereas the LC‐ P6P could do so only at 30 mol % incorporation. The LC properties of the twin molecules as well as copolymers were studied using differential scanning calorimetry, polarized light microscopy (PLM) along with variable temperature wide angle X‐ray diffraction. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Water‐soluble top coats for orientation control of liquid crystal‐containing block copolymer films

An easily removable, water‐soluble top coat of polyvinylpyrrolidone (PVP) is used to control the orientation of microdomains in a liquid crystalline block copolymer (LC BCP, poly(ethylene oxide)‐block‐poly(6‐(4‐methoxy‐azobenzene‐4′‐butyl) hexyl methacrylate)). The corresponding LC homopolymer is also investigated for comparison. Atomic force microscopy is used to determine the orientation of the cylindrical microdomains of the LC BCP. UV–vis spectroscopy and grazing incidence wide‐angle X‐ray scattering are used to determine the orientation of the LC mesogens in the LC homopolymer and the LC BCP films annealed both with and without a top coat. Once the LC BCP morphology is self‐assembled, the PVP top coat layer can be easily removed with water or alcohol. The facile removal of the top coat improves the processability of BCPs in technological applications, and enables direct investigation of the BCP morphology in scientific studies. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1569–1574     

Synthesis and tailoring phase behavior of mesogen jacketed liquid crystalline copolymers based on 2, 5‐bis[(4‐alkoxyphenyl)oxycarbonyl]styrenes

Based on 2, 5‐bis[(4‐alkoxyphenyl)oxycarbonyl]styrenes (M‐OCm, m is the number of the carbons of alkyl tails, m = 1, 4, and 18), three series of binary copolymers with high‐molecular weights, {poly(M‐OC1‐co‐M‐OC4), poly(M‐OC1‐co‐M‐OC18), and poly(M‐OC4‐co‐M‐OC18)} have been prepared via free‐radical polymerization. The random nature of the copolymers was expected on the basis of the assumed similar reactivities because of the analogous monomers. The phase behaviors of copolymers were studied by DSC, POM, and one‐dimensional wide‐angle X‐ray diffraction. The results showed that liquid crystalline (LC) phase structures of copolymers, containing smectic phase, reentrant isotropic phase, columnar phase. and isotropic phase, were strongly depended on the composition and the alkyl length due to the competing among the steric effect, the microphase separation and the driving force of the entropy. When one of them occupied a dominant position, the LC phase structure can be presented for the copolymers. Otherwise, the LC phase structure is lost despite the pair of corresponding homopolymers forming mesogenic structure. Therefore, through copolymerization, LC behavior of the mesogen‐jacketed liquid crystalline polymers can be greatly varied. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2804–2816     

Preparation of Ag nanoparticles termini‐protected side‐chain liquid crystalline azobenzene polymers by RAFT polymerization

A new synthetic approach to prepare Ag nanoparticles protected side‐chain liquid crystalline (LC) azobenzene polymers was reported. It is based on the reduction of silver ions in presence of a LC polymer polymerized by RAFT. The formation of Ag colloidal nanoparticles was confirmed by TEM and UV analysis. At the same time, according to the results of DSC, XPS, and FTIR spectra, Ag nanoparticles were protected by the side‐chain LC azobenzene polymers through surface attachment interactions between thiol groups and Ag. The out‐plane orientation of side‐chain LC is confirmed by surface‐enhanced Raman spectra analysis and scanning near‐field optical microscope, resulting from the large electromagnetic field arising from the excitation of surface plasmon polariton of Ag nanoparticles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5380–5386, 2007     

Molecular and nanoscale factors governing pressure‐sensitive adhesion strength of viscoelastic polymers

Pressure‐sensitive adhesives (PSAs) are finding increasing applications in various areas of industry and medicine. PSAs are a special class of viscoelastic polymers that form strong adhesive joints with substrates of varying chemical nature under application of light external bonding pressures (1–10 Pa) over short periods of time (1–5 s). To be a PSA, a polymer should possess both high fluidity under applied bonding pressure, to form good adhesive contact, and high cohesive strength and elasticity, which are necessary for resistance to debonding stresses and for dissipation of mechanical energy at the stage of adhesive bond failure under detaching force. For rational design of novel PSAs, molecular insight into mechanisms of their adhesive behavior is necessary. As shown in this review, strength of PSA adhesive joints is controlled by a combination of diffusion, viscoelastic, and relaxation mechanisms. At the molecular level, strong adhesion is the result of a narrow balance between two generally conflicting properties: high cohesive strength and large free volume. These conflicting properties are difficult to combine in a single polymer material. Individually, high cohesive interaction energy and large free volume are necessary but insufficient prerequisites for PSA strength. Evident correlations are observed between the adhesive bond strengths of different PSAs, and their relaxation behaviors are described by longer relaxation times. Innovative PSAs with tailored properties can be produced by physical mixing of nonadhesive long‐ and short‐chain linear parent polymers, with groups at the two ends of the short chains complementary to the functional groups in the recurring units of the long chains. Although chemical composition and molecular structure of such innovative adhesives are unrelated to those of conventional PSAs, their mechanical properties and adhesive behaviors obey the same general laws, such as the Dahlquist's criterion of tack. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Viscometric investigation of intramolecular hydrogen bonding cohesional entanglement in extremely dilute aqueous solution of poly vinyl alcohol

An investigation of influence of cryogenic treatment on extremely dilute aqueous solution of poly(vinyl alcohol) (PVA) was performed by viscometry. The solution was frozen in liquid nitrogen or in a freezer at −25°C, then thawed at ambient temperature and concentrated by evacuation. The viscosity of the solution was measured using the dilute method. The experimental results indicated that the viscosity of the solution is related to N, the times of the freezing and thawing cycle, and the temperature for freezing. Undergoing a treatment of freezing and thawing, the viscosity of the solution is decreased, while it can be recovered the value of before the treatment as the solution had been heated at a high temperature. Thus, a conclusion may be obtained; that is, for an extremely dilute aqueous solution of PVA, which concentration is below C_gel, threshold concentration for gelation, an intramolecular hydrogen bonding cohesional entanglement can be formed by freezing as N < 5. However, in the case of N > 5, it not only formed an intramolecular hydrogen bonding but also produced an intermolecular hydrogen bonding. At the same time, the abnormal behavior of reduced viscosity of the solution in extremely dilute concentration region has been explained. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 2421–2427, 1997     

Synthesis and characterization of side-chain liquid crystal polyurethanes

A series of liquid crystal α-[bis(2-hydroxyethyl)amino]-ω-(4-nitroazobenzene-4′-oxy)alkanes (Cn-diol) with different alkyl chain length has been synthesized. All Cn-diols exhibit a smectic phase that has been identified by means of polarizing microscopy and differential scanning calorimetry. These compounds are suitable monomers for the synthesis of side-chain liquid crystalline polyurethanes and polyesters. They were polymerized with hexamethylene diisocyanate to corresponding SCLC polyurethanes in which the spacer length was varied from 2 to 12 methylene units. Polyurethanes (CnP) with spacer lengths n ≥ 4 exhibited liquid crystalline behavior. Fourier transform infrared temperature studies of the CnP were done focusing on H-bonds between the N H and CO groups of the urethane backbone. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2871–2888, 1997