Novel soluble fluorinated poly(ether imide)s with different pendant groups: Synthesis,thermal, dielectric,and optical properties

Three types of new bis(ether dianhydride) monomers, [4,4′‐(2‐(3′‐methylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4a)], [4,4′‐(2‐(3′‐trifluoromethylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4b)], and [4,4′‐(2‐(3′,5′‐ditrifluoromethylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4c)] were prepared via a multistep reaction sequence. Three series of soluble poly(ether imide)s (PEIs) were prepared from the obtained dianhydrides by a two‐step chemical imidization method. Experimental results indicated that all the PEIs had glass transition temperature in the range of 200–230 °C and the temperature of 5% weight loss in the range of 520–590 °C under nitrogen. The PEIs showed excellent solubility in a variety of organic solvents due to introduction of the bulky pendant groups and were capable of forming tough films. The casting films of PEIs (80–91 μm in thickness) had tensile strengths in the range from 88 to 117 MPa, tensile modulus from 2.14 to 2.47 GPa, and elongation at break from 15 to 27%. The casting films showed UV‐Vis absorption edges at 357–377 nm, low dielectric constants of 2.73–2.82, and water uptakes lower than 0.66 wt %. The spin‐coated films of PEIs presented a minimum birefringence value as low as 0.0122 at 650 nm and low optical absorption at the optical communication wavelengths of 1310 and 1550 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3281–3289, 2010     

Microscopic features of methacrylate polymers with zwitterionic pendant groups determined by various techniques

The objective of this work was to determine microscopic structural features of three methacrylate polymers with different numbers of diethylene glycol residues and zwitterionic pendant groups. X‐ray diffraction, electron microscopy, and scanning probe microscopy techniques were employed. X‐ray data led to the adoption of a model made up of molecular aggregates forming lamellar domains, establishing in this way ordered characteristics of these kinds of polymers. Scanning electron microscopy images provided evidence of the occurrence of a lamellar structure forming the morphology of the polymers. This was corroborated by atomic force microscopy experiments. Transmission electron microscopy revealed that the lamellar aggregates conformed into clusters immersed in a polymeric matrix. From phase‐contrast images, information on the homogeneity of the composition at a molecular surface level was obtained. Then, the techniques provided evidence of the lamellar domain characteristics of the studied sulfobetaines. The crystallinity was a function of the number of ethoxy groups because as this number increased, the crystallinity became lower © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1152–1160, 2005     

Synthesis and characterization of styrenic polymers with pendant pyrazole groups. II

The synthesis of styrenic monomers that have pyrazolic or bipyrazolic pendant groups is described. Their homopolymerization and their copolymerization with maleic anhydride (MA) and N-(3-acetoxy propyl) maleimide is reported. The monomers were prepared from the Williamson reaction between 2-pyridine carbinol, hydroxy monopyrazole, hydroxy bipyrazole, and chloromethyl styrene. The homopolymerizations of such styrenic monomers were tried under different conditions, which led to low molecular weight polymers with a high polydispersity. However, alternating copolymers were obtained using maleic anhydride or N-(3-acetoxy propyl) maleimide as comonomers, as shown by ¹H-NMR, elemental analysis, and reactivity ratios r₁ and r₂. Furthermore, the hydrolysis of the acetate function of different copolymers was performed quantitatively. Unlike the acetoxy copolymers, such products do not have any glass transition temperature. Thermogravimetric investigations have shown that these copolymers exhibit good thermostability. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of novel polyimides with bulky pendant groups

New dianhydrides containing t‐butyl and phenyl pendant groups have been synthesized and used as monomers, together with commercial diamines, to prepare novel polyimides. The influence of the chemical structure of the monomers on their reactivity has been studied by quantum semiempirical methods. The polyimides have been characterized by FTIR and by NMR in the case of soluble polymers. The presence of pendant groups and the method used to imidize polyimide precursors greatly affected polymer properties such as solubility, glass transition temperature, thermal stability, and mechanical properties. As a rule, the novel polyimides showed better solubility in organic solvents than the parent polyimides. Glass transition temperatures in the range 250–270°C and decomposition temperatures over 520°C were observed for the set of current polymers. Tensile strengths up to 135 MPa and mechanical moduli up to 3.0 GPa were measured on films of the current polyimides. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 805–814, 1999     

Transport properties of small molecules in zwitterionic polymers

Despite great interests in using zwitterionic polymers for membrane surface modification to enhance antifouling properties, there lacks fundamental understanding of the relationship between polymer structure and water/salt separation properties. In this study, two series of zwitterionic polymers were prepared from sulfobetaine methacrylate and 2‐methacryloyloxyethyl phosphorylcholine. Both are crosslinked by poly(ethylene glycol) diacrylate (PEGDA). These copolymers were thoroughly characterized in terms of sol‐gel fraction, density, glass transition temperature, contact angle, water and salt transport properties, and pure‐gas permeability. Interestingly, the zwitterionic polymers exhibit water sorption and permeability similar to noncharged poly(ethylene glycol)‐based materials. These zwitterionic polymers exhibit lower NaCl diffusivity and permeability and thus higher water/NaCl selectivity than the non‐charged PEG‐based materials at similar water volume fractions, demonstrating their promise for membrane surface modification for desalination and wastewater treatment. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1924–1934     

Structures and thermal properties of chitosan-modified poly(methyl methacrylate)

The emulsion polymerization of methyl methacrylate in the presence of chitosan with potassium persulfate (KPS) as an initiator was examined in a previous article. The free radicals that dissociated from KPS not only initiated the polymerization but also degraded the chitosan molecules. Therefore, in addition to its role as a cationic surfactant, chitosan also participated in the polymerization reaction. When the polymerization was complete, the latex polymer consisted of poly(methyl methacrylate) (PMMA) homopolymer and chitosan–PMMA copolymer. In this article, the structures and thermal properties of latex polymers are examined. Gel permeation chromatography was used to measure the molecular weight of the PMMA homopolymer, with the copolymer composition determined by an elemental analyzer. Scanning and transmission electronic microscopes were used to measure the size of latex particles from different reaction systems. The surface charges of latex particles at several different pH values were determined by the measurement of the ζ potential. All results agreed with the reaction mechanism proposed in the previous article. Finally, the presence of rigid chitosan increased the glass-transition temperature of the final latex polymers. Thermogravimetric analysis showed that the degradation behavior of latex polymers was similar to the unzipping mechanism of PMMA, yet the presence of chitosan units hindered the unzipping of the main chains in chitosan–PMMA copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1646–1655, 2001     

Synthesis,thermal characterization,and tensile properties of alipharomatic polyesters derived from 1,3‐propanediol and terephthalic,isophthalic, and 2,6‐naphthalenedicarboxylic acid

In this work, three alipharomatic polyesters—poly(propylene terephthalate) (PPT), poly(propylene isophthalate) (PPI), and poly(propylene naphthalate) (PPN)—were prepared and studied with the aliphatic diol 1,3‐propanediol and the corresponding aromatic diacids. Their synthesis was performed by the two‐stage melt polycondensation method in a glass batch reactor. The thermal characterization of these polyesters was carried out with different thermal techniques such as simultaneous thermogravimetry/differential thermal analysis, thermomechanical analysis (TMA), and dynamic thermomechanical analysis. From the recorded values for the glass‐transition temperature (T_g) and melting temperature with all the aforementioned techniques, it could be said that they were in good agreement. According to the thermogravimetric results, PPT and PPI showed about the same thermal stability, whereas PPN seemed to be somewhere more thermostable. Remarkably, a transition existed immediately after T_g that was realized by the first derivative of TMA, and it was characterized as a midrange transition. For all polyesters, the average coefficient of linear thermal expansion was calculated with TMA. The secondary relaxations T_β and T_γ, recorded with dynamic mechanical thermal analysis, were mainly affected by the kinds of monomers. Concerning the mechanical properties, PPN had the highest tensile strength at break, whereas PPT had the highest elongation at break. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3998–4011, 2005     

Synthesis of n‐alkyl methacrylate polymers with pendant carbazole moieties and their derivatives

New methacrylate monomers with carbazole moieties as pendant groups were synthesized by multistep syntheses starting from carbazoles with biphenyl substituents in the aromatic ring. The corresponding polymers were prepared using a free‐radical polymerization. The novel polymers contain N‐alkylated carbazoles mono‐ or bi‐substituted with biphenyl groups in the aromatic ring. N‐alkyl chains in polymers vary by length and structure. All new polymers were synthesized to evaluate the structural changes in terms of their effect on the energy profile, thermal, dielectric, and photophysical properties when compared to the parent polymer poly(2‐(9H‐carbazol‐9‐yl)ethyl methacrylate). According to the obtained results, these compounds may be well suited for memory resistor devices. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 70–76     

Synthesis and thermal characterization of poly(1,3-phenyl octanoate)

Poly(1,3-phenyl octanoate) (polyHPOA) was prepared by melt and solution polycondensation methods from 8-(3-hydroxyphenyl)octanoic acid (HPOA), a novel monomer useful as a chain disruptor in liquid crystalline copolyesters. The melt polycondensation technique gave a polyester of higher inherent viscosity (0.80 dL/g in p-chlorophenol) than that (0.75 and 0.56 dL/g, respectively, for the Ogata method and thionyl chloride/pyridine method in the same solvent) of solution techniques. The solubility of the polyesters was limited to strongly acidic and polar solvents. The polyester was characterized by elemental analysis, IR spectroscopy, WAXD, TGA, isothermal TGA and DTA. x-ray diffraction pattern of the polyesters indicated that it is amorphous in nature. TGA of the polyesters gave a thermal stability of 470°C in nitrogen atmosphere at 50% decomposition. The available thermal data suggest that the polyester undergoes thermal decomposition by a pyrolytic cleavage involving the ester linkage with the formation of ketene and phenol ended groups as intermediates. © 1996 John Wiley & Sons, Inc.     

Preparation,Tg improvement,and thermal stability enhancement mechanism of soluble poly(methyl methacrylate) nanocomposites by incorporating octavinyl polyhedral oligomeric silsesquioxanes

The soluble poly(methyl methacrylate‐co‐octavinyl‐polyhedral oligomeric silsesquioxane) (PMMA–POSS) hybrid nanocomposites with improved T_g and high thermal stability were synthesized by common free radical polymerization and characterized using FTIR, high‐resolution ¹H NMR, ²⁹Si NMR, GPC, DSC, and TGA. The POSS contents in the nanocomposites were determined based on FTIR spectrum, revealing that it can be effectively adjusted by varying the feed ratio of POSS in the hybrid composites. On the basis of the ¹H NMR analysis, the number of the reacted vinyl groups on each POSS molecules was determined to be about 6–8. The DSC and TGA measurements indicated that the hybrid nanocomposites had higher T_g and better thermal properties than the pure PMMA homopolymer. The T_g increase mechanism was investigated using FTIR, displaying that the dipole–dipole interaction between PMMA and POSS also plays very important role to the T_g improvement besides the molecular motion hindrance from the hybrid structure. The thermal stability enhances with increase of POSS content, which is mainly attributed to the incorporation of nanoscale inorganic POSS uniformly dispersed at molecular level. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5308–5317, 2007     

Synthesis of fluorinated polybenzoxazoles with low dielectric constants

Two fluorinated aromatic bis(o‐aminophenol)s, 1,1‐bis(3′‐amino‐4′‐hydroxyphenyl)‐1‐(3′‐trifluoromethylphenyl)‐2,2,2‐trifluoroethane (6FAP) and 1,1‐bis(3′‐amino‐4′‐hydroxyphenyl)‐1‐(3′,5′‐ditrifluoromethylphenyl)‐2,2,2‐trifluoroethane (9FAP) were synthesized, which were allowed to polycondense with aromatic diacyl chlorides to afford the fluorinated aromatic polybenzoxazoles (PBOs) via a conventional two‐step procedure in which the low‐temperature solution polycondensation process was first performed to yield poly(o‐hydroxyamide)s (PHAs) followed by the thermal cyclodehydration to give the PBOs. Experimental results indicated that the PHAs had inherent viscosities in the range of 0.29–0.68 dL/g, showing excellent solubility in organic solvents. The PHAs could be thermally cyclodehydrated into the corresponding PBOs at 260–370 °C. The obtained PBOs exhibited enhanced glass‐transition temperature but decreased solubility with respect to the PHAs. The PBOs showed glass‐transition temperatures in the range of 315–337 °C and excellent thermal stabilities with 5% original weight‐loss temperatures (T₅) of >513 °C. Additionally, the PBO films had average refractive index of 1.5298–1.5656, birefringence of 0.0051–0.0092, and low dielectric constants of 2.57–2.70. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and nonlinear optical properties of polyacetylenes containing oxadiazole and thiophene pendant groups with high thermal stability

A series of random copolymers poly(3‐ethynylthiophene)‐copoly(2‐(4‐decyloxyphenyl)‐5‐(4‐ethynylphenyl)‐1,3,4‐oxadiazole) with different oxadiazole content ( P2 – P4 ) and homopolymer poly(3‐ethynylthiophene) ( P1 ) as well as poly(2‐(4‐decyloxyphenyl)‐5‐(4‐ethynylphenyl)‐1,3,4‐oxadiazole) ( P5 ) were prepared. The copolymers ( P2 – P4 ) are completely soluble in common organic solvents. The structures and properties of all polymers were characterized and evaluated by FTIR, ¹H NMR, ¹³C NMR, TGA, UV, PL, GPC, and nonlinear optical (NLO) analyses. The incorporation of diaryl‐oxadiazole into polyacetylene‐containing thiophene significantly endows copolymers with higher thermal stability, which may origin from the synergetic effect of the “jacket effect” of diaryl‐oxadiazole units and the effect of retarding or eliminating a few 6π‐electrocycliaztion proceeds of oxadiazole‐containing polyacetylene due to the hindrance of thiophene units. When the copolymer ( P3 ) posses more regular alternating thiophene pendants and oxadiazole pendants arrangement along the polymer backbone, it shows good thermal stability (T_d up to 388 °C) and larger third‐order nonlinear optical susceptibility (χ(3) up to 11.0 × 10^?11 esu). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Polyisophthalamides with benzoyl pendent groups: Synthesis,characterization, and evaluation of properties

Polyisophthalamides containing benzoyl pendent groups were prepared from 5-benzoylisophthaloyl chloride and seven aromatic diamines, and their properties were compared with those of unsubstituted polyisophthalamides. The incorporation of one pendent benzoyl group per repeat unit brought about a decrease in the glass transition temperature of 10–30°C, relative to the unmodified polymers, while the thermal resistance (programmed TGA) remained unchanged or went down slightly. Other properties investigated were mechanical properties, solubility, and water absorption. © 1993 John Wiley & Sons, Inc.     

Synthesis,structures, luminescent and dielectric properties of lanthanide coordination polymers

Under hydrothermal conditions, four lanthanide coordination polymers were synthesized based on 4-(4,5-dicarboxy-1H-imidazol-2-yl)pyridine 1-oxide (H₃DCImPyO), with the molecular forumulas [Eu(HDCImPyO)·(H₂O)₂·(CHO₂)]_n (1), [Sm(HDCImPyO)·(H₂O)₂·(HCO₂)]_n (2), {[La(HDCImPyO)·(H₂O)·(HCO₂)]·O₂}_n (3) and {[Y(HDCImPyO)·(C₂O₄)·(H₂O)₂]·H₂O}_n (4). With diverse coordination modes, they were further characterized by elemental analysis, infrared spectroscopy, dielectric measurement, and single-crystal X-ray structural analysis. Complexes 1 and 2 were isostructural and had similar structures with {4⁴, 6²} topology. Complex 1 exhibited strong fluorescent emission in the solid state at room temperature. In 3, HDCImPyO^2? adopted μ₄-kO, O′: kO′, O′′: O′′′: O′′′′ coordination to bridge four La(III) ions to form a 3-D framework with {4. 5²}₂{4². 5¹⁰. 6¹². 7. 8³} topology. In 4, both HDCImPyO^2? ligands and Y³⁺ cations were simplified as linkers to form an interpenetrating 3-D framework with {4¹³. 6²}₂{4²². 6⁶} topology.     

Synthesis and thermal and spectroscopic properties of macrocyclic vinyl aromatic polymers

Well‐defined and narrow molecular weight distribution macrocyclic poly(2‐vinylnaphthalene) (P2VN) and poly(2‐vinyl‐9,9‐dimethylfluorene) (PDMVF) containing a single 1,4‐benzylidene or 9,10‐anthracenylidene unit have been synthesized via the potassium naphthalide initiated polymerization of the monomers followed by the end‐to‐end coupling of the resulting P2VN dianions under high‐dilution conditions with 1,4‐bis(bromomethyl)benzene or 9,10‐bis(chloromethyl)anthracene. Molecular characterization has been carried out by size exclusion chromatography, nuclear magnetic resonance, differential scanning calorimetry, ultraviolet–visible spectroscopy, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. The thermal properties show distinct differences between the cyclic and matching linear polymers, with the macrocycles showing much higher glass‐transition and decomposition temperatures. The absorption bands are both hyperchromic and hypochromic with respect to the model aromatic compounds, and this is consistent with intensity borrowing. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5488–5503, 2004     

Synthesis and properties of widely conjugated polyacetylenes having anthryl and phenanthryl pendant groups

The metathesis polymerization of 1- and 2-ethynylanthracenes (1-EA and 2-EA) and 2- and 3-ethynylphenanthrenes (2-EP and 3-EP) in the presence of various WCl₆-based catalysts produced widely conjugated soluble polymers with relatively high molecular weights. The highest weight-average molecular weights of poly(1-EA) and poly(2-EA) reached 61,000 and 26,000, respectively, when Ph₄Sn was used as cocatalyst, while those of poly(2-EP) and poly(3-EP) reached 23,000 and 65,000, respectively, with Ph₃Bi as cocatalyst. In contrast, MoCl₅-based catalysts were hardly or not effective for these monomers. A large red-shifted peak was observed centering at 570 nm (the cutoff at 750 nm) in the absorption spectrum of poly(1-EA), while the red-shifted peaks were seen around 500 nm (the cutoffs near 700 nm) in the spectra of other polymers, indicating wide conjugations of the polymer chains. The configurational structures of all the polymers confirmed by DSC and ¹H-NMR were trans structures. However, poly(1-EA) and poly(3-EP) appeared to consist partly of cis structures in their main chains. All of the present polymers showed relatively high thermal stability in air compared with poly(phenylacetylene). © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3131–3137, 1998     

Synthesis and characterization of difluor‐aniline polymers

Undoped and chlorine doped difluoraniline polymers (PDFA) were synthesized and characterized to study the electric behavior of polyanilines with three different fluorine disubstitutions in the benzene rings that could produce polarizable molecules. The structures of the resulting polymers were studied by infrared spectroscopy focusing in the oxidation degree in the polymers. A discussion of the molecular weight of PDFAs as measured by light scattering in different solvents is presented, since the polymers form aggregates depending on the solvent used, the position of the fluorine substitutions, the doping level and the temperature. The aggregates in polarizable polymer solutions can produce wrong estimations in the molecular weight if the influence of temperature is not considered. The PDFAs thermal and electroconductivity analysis also showed dependence on the position of the fluorine substitutions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2130–2136, 2002     

Synthesis and characterization of aromatic poly(ether sulfone)s containing pendant sodium sulfonate groups

Poly(ether sulfone)s containing pendant sodium sulfonate groups were prepared by the aromatic nucleophilic substitution reaction of 4,4′-dichlorodiphenylsulfone ( 1 ) and sodium 5,5′-sulfonylbis (2-chlorobenzenesulfonate) ( 2 ) with bisphenols ( 3 ) in the presence of potassium carbonate in N,N-dimethylacetamide. A new monomer 2 containing the sodium sulfonate groups was synthesized by the sulfonation of 1 with fuming sulfuric acid. The polycondensation proceeded smoothly at 170°C and produced the desired poly(ether sulfone)s containing the sodium sulfonate with inherent viscosities up to 1.2 dL/g. The polymers were quite soluble in strong acid, dipolar aprotic solvents, m-cresol, and dichloromethane. The thermogravimetry of the polymers showed excellent thermal stability, indicating that 10% weight losses of the polymers were observed in the range above 460°C in nitrogen atmosphere. Both the glass transition temperatures and hydrophilicity of the polymers increased with increasing their concentrations of sodium sulfonate groups. © 1993 John Wiley & Sons, Inc.     

Effect of needle diameter on nanofiber diameter and thermal properties of electrospun poly(methyl methacrylate)

The effect of needle diameter on the resulting electrospun poly(methyl methacrylate) (PMMA) average nanofiber diameter has been evaluated for three different needle gauges. The resulting nanofibers were observed and analyzed by scanning electron microscopy (SEM), suggesting a lack of correlation between the needle diameter used and the resulting average nanofiber diameter. Thermogravimetric analysis (TGA) indicated an increase in the thermal stability of PMMA nanofibers when compared to powdered PMMA, while differential scanning calorimetry (DSC) studies evidenced lower glass transition temperatures (Tg) for PMMA nanofibers in the first heating cycle. Copyright © 2007 John Wiley & Sons, Ltd.     

Improvement of compatibility,mechanical, thermal and dielectric properties of poly(lactic acid) and poly(butylene adipate-co-terephthalate) blends and their composites with porous clay heterostructures from mixed surfactant systems

In this study, nanocomposite poly(lactic acid) and poly(butylene adipate-co-terephthalate) (PLA/PBAT) blends were prepared through polymer blending in the presence of multi-functional epoxy as a compatibilizer that could react with epoxy group and terminated end group of two phases to increase interfacial adhesion between PLA and PBAT and improve the toughness of PLA. The effects of porous clay heterostructure from mixed CTAB:CTAC surfactant in the mole ratio of 1:2 (B1C2-PCH) were also investigated. The elongation at break of the blends reached 38%, which was eight times that of neat PLA. The cryo-fractured surface demonstrated the interfacial adhesion caused by the interaction of the epoxy group of the reactive compatibilizer with the terminal carboxyl and hydroxyl groups of PLA and PBAT. Moreover, PBAT reduced the crystallization rate and percent crystallinity of the PLA matrix and further decreased when compatibilizer was used. Alternatively, B1C2-PCH accelerated the heterogeneous nucleation and crystallization of the nanocomposite films. After adding small amount of B1C2-PCH, the nanocomposite films demonstrated excellent dielectric properties. Therefore, the improvement of PLA/PBAT nanocomposite blends are capable to be further developed as polymeric capacitor films.