Relationships between the chemical structures and the solubility,diffusivity, and permselectivity of propylene and propane in 6FDA‐based polyimides

The solubility, diffusivity, and permselectivity of propylene and propane in 40 different polyimides synthesized from 2,2‐bis(3,4‐decarboxyphenyl)hexafluoropropane dianhydride (6FDA) were determined at 298 K. The influence of the chemical structures on the physical and gas permeation properties of the 6FDA‐based polyimides was studied. The solubility of propylene in an unrelaxed volume of a polymer matrix mainly contributes to the total solubility of propylene for various 6FDA‐based polyimides. The diffusivity, the permeability of propylene, and the permselectivity in the propylene/propane mixed‐gas system depend on the solubility of propylene. This is thought to be associated with the penetrant‐induced plasticization effect. 6FDA‐based polyimides, which have a high glass‐transition temperature and a large fractional free volume, exhibit a high permeability with a relatively low permselectivity. Changing the number of  CH3 substituents in the phenylene linkage and changing the connectivity in the main chain are good ways of controlling the solubility of propylene and the corresponding permselectivity in the propylene/propane mixed‐gas system. Some 6FDA‐based polyimides restrict the solubility of propylene through the introduction of a  CONH linkage between the phenylene linkage; the  Cl substituent in the phenylene linkage at the diamine moiety exhibits a high separation performance in the mixed‐gas system. The polyimides are potentially useful membrane materials for the separation of propylene and propane in the petrochemical industry. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2525–2536, 2000     

Gas transport properties of 6FDA-TMPDA/MOCA copolyimides

The gas permeation behavior of 2,2′-bis(3,4′dicarboxyphenyl) hexafluoropropane dianhydride(6FDA)-2,4,6-trimethyl-1,3-phenylenediamine (TMPDA)/4,4′-methylene bis(2-chloroaniline) (MOCA) copolyimides was investigated by systematically varying the diamine ratios. All the copolyimides were soluble in most of the common solvents. The gas permeabilities and diffusion coefficients decreased with increasing MOCA content; however, the permselectivity of gas pairs such as H₂/N₂, O₂/N₂, CO₂/CH₄ was enhanced with the incorporation of MOCA moiety. Moreover, all of the copolyimides studied in this work exhibited performance near, lying on or above the existing upper bound trade-off line between permselectivity and permeability.     

Effect of ultraviolet light irradiation on gas permeability in polyimide membranes. 1. Irradiation with low pressure mercury lamp on photosensitive and nonphotosensitive membranes

Two types of polyimide membranes; one crosslinkable and the other noncrosslinkable using ultraviolet light irradiation (UV irradiation), were prepared and investigated concerning the effect of UV irradiation on their gas permeabilities and selectivities. Permeability and diffusion coefficients for O₂, N₂, H₂, and CO₂ were determined using the vacuum pressure and time lag method. Sorption properties for carbon dioxide were carried out to evaluate the changes in the free volume in the membranes due to the irradiation. In both membranes, permeability coefficients for all gases used in this study decreased and permselectivity, particularly for H₂ over N₂, increased with increasing UV irradiation time without a significant decrease in the flux of H₂. The coefficients depended on the membrane thickness, suggesting asymmetrical changes in both membranes due to UV irradiation. It was suggested by an attenuated total reflection (ATR) FTIR method and analysis of the gas sorption properties of the membranes that the physical changes due to UV irradiation at the irradiated side in both membranes significantly affected their gas permeation properties compared with the chemical changes, especially the crosslinking in the crosslinkable type. © 1997 John Wiley & Sons, Inc. J. Polym Sci B: Polym Phys 35: 2259–2269, 1997     

Gas permeability and hydrocarbon solubility of poly[1‐phenyl‐2‐[p‐(triisopropylsilyl)phenyl]acetylene]

The effects of film thickness, physical aging, and methanol conditioning on the solubility and transport properties of glassy poly[1‐phenyl‐2‐[p‐(triisopropylsilyl) phenyl]acetylene] are reported at 35 °C. In general, the gas permeability coefficients are very high, and this polymer is more permeable to larger hydrocarbons (e.g., C₃H₈ and C₄H₁₀) than to light gases such as H₂. The gas permeability and solubility coefficients are higher in as‐cast, unaged films than in as‐cast films aged at ambient conditions and increase to a maximum in both unaged and aged as‐cast films after methanol conditioning. For example, the oxygen permeability of a 20‐μm‐thick as‐cast film is initially 100 barrer and decreases to 40 barrer after aging for 1 week at ambient conditions. After methanol treatment, the oxygen permeabilities of unaged and aged films increase to 430 and 460 barrer, respectively. Thicker as‐cast films have higher gas permeabilities than thinner as‐cast films. Propane and n‐butane sorption isotherms suggest significant changes in the nonequilibrium excess free volume in these glassy polymer films due to processing history. For example, the nonequilibrium excess free volume estimated from the sorption data is similar for as‐cast, unaged samples and methanol‐conditioned samples; it is 100% higher in methanol‐conditioned films than in aged, as‐cast films. The sensitivity of permeability to processing history may be due in large measure to the influence of processing history on nonequilibrium excess free volume and free volume distribution. The propane and n‐butane diffusion coefficients are also sensitive to film processing history, presumably because of the dependence of diffusivity on free volume and free volume distribution. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1474–1484, 2000     

Gas‐transport properties of indan‐containing polyimides

A series of indan‐containing polyimides were synthesized, and their gas‐permeation behavior was characterized. The four polyimides used in this study were synthesized from an indan‐containing diamine [5,7‐diamino‐1,1,4,6‐tetramethylindan (DAI)] with four dianhydrides [3,3′4,4′‐benzophenone tetracarboxylic dianhydride (BTDA), 3,3′4,4′‐oxydiphthalic dianhydride (ODPA), (3,3′4,4′‐biphenyl tetracarboxylic dianhydride (BPDA), and 2,2′‐bis(3,4′‐dicarboxyphenyl) hexafluoropropane dianhydride (6FDA)]. The gas‐permeability coefficients of these four polyimides changed in the following order: DAI–BTDA < DAI–ODPA < DAI–BPDA < DAI–6FDA. This was consistent with the increasing order of the fraction of free volume (FFV). Moreover, the gas‐permeability coefficients were almost doubled from DAI–ODPA to DAI–BPDA and from DAI–BPDA to DAI–6FDA, although the FFV differences between the two polyimides were very small. The gas permeability and diffusivity of these indan‐containing polyimides increased with temperature, whereas the permselectivity and diffusion selectivity decreased. The activation energies for the permeation and diffusion of O₂, N₂, CH₄, and CO₂ were estimated. In comparison with the gas‐permeation behavior of other indan‐containing polymers, for these polyimides, very good gas‐permeation performance was found, that is, high gas‐permeability coefficients and reasonably high permselectivity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2769–2779, 2004     

Structure/permeability relationships of polyimides with branched or extended diamine moieties

Mean permeability coefficients for CO₂, O₂, N₂, and CH₄ in seven types of 6FDA polyimides with branched or extended diamine moieties were determined at 35.0°C (95.0°F) and at pressures up to 10.5 atm (155 psia). In addition, solubility coefficients for CO₂, O₂, N₂, and CH₄ in six of these polyimides were determined at 35.0°C and at 6.8 atm (100 psia). Mean diffusion coefficients for the six gas/polyimide systems were calculated from the permeability and solubility data. The relationships between the chemical structure of the polyimides, some of their physical properties (glass transition temperature, mean interchain spacing, specific free volume), and their gas permeability, diffusivity, and solubility behavior are discussed. The 6FDA polyimides studied here exhibit a considerably lower selectivity for the CO₂/CH₄ and O₂/N₂ gas pairs than 6FDA polyimides with short and stiff aromatic diamines with comparable CO₂ and O₂ permeabilities. © 1993 John Wiley & Sons, Inc.     

Transport properties of polyimides containing phenylquinoxaline moieties

The gas permeabilities of a number of new structurally related polyimides containing phenylquinoxaline moieties were studied for the first time. The test polymers had different dianhydride units, whereas their diamine components differed in the presence of flexible ether bonds-O-in the main chain, a structure that is reflected in the effective packing of chains and, as a result, in transport parameters. The permeability, diffusion, and solubility coefficients for the gases H₂, He, O₂, N₂, CO, CO₂, and CH₄, as well as the ideal separation factors for gas pairs, were determined. The transport characteristics of polymers were compared within the given polymer series and with published data for other polymer series.     

Gas permeability of cardo-poly(ether-ether-ketone) and poly(phenylene sulfide)

The gas permeability and sorption of CO₂ and N₂O was measured on cardo-poly(ether-ether-ketone) (C-PEEK) and poly(phenylene sulfide) (PPS) at 298 K. The results are discussed on the basis of the dual-mode model. Results obtained from measurements at 308 K are compared with literature data of poly(phenylene oxide) (PPO), poly(sulfone) (PSU) and poly(carbonate) (PC). While C-PEEK shows similar transport properties as PC and PSU, the values of PPS are distinctly lower. The solubility of CO₂ in the various polymers as well as the correlation of the permeability coefficients of the same polymers for He, Ar, CO₂, N₂, and CH₄ with the kinetic molecular diameter of the gases indicate a simple relation of the transport properties with the polymer density.     

Studies on the synthesis and properties of ferroelectric side chain liquid crystalline polyoxetanes

Two series of novel ferroelectric liquid crystalline (FLC) monomers were derived from 3-(hydroxymethyl)-3-methyloxetane, used as the backbone unit, and 2-(S)-[2-(S)-methylbutoxy]propionic acid, as a chiral moiety. The corresponding polyoxetanes were prepared by ring-opening polymerization using BF₃ · OEt₂ as an initiator. In addition to the structure identification, their liquid crystal phase behavior and electrical properties are also studied. Before their connection to the chiral molecular moiety, two series of carboxylic acids, 4-(6-[(3-methyloxetan-3-yl)methoxy]alkoxy)-benzoic acids and 4,4′-[6-(3-methyloxetan-3-yl)alkoxy]biphenylcarboxylic acids, show the phase sequence K Sc I and K Sc N I, respectively. After connection, the phase behavior of the corresponding chiral monomers is changed from K Sc I to K Sc* N* I as well as from K Sc N I to K Sc* Sa I. Only the phase sequence K Sc* Sa I is observed in both series of polyoxetanes. All of the synthesized monomers exhibited enantiotropic chiral smectic C(Sc*) phase. The monomers, with the biphenyl unit linked directly with a chiral center, possessed higher spontaneous polarization (P_s) values. Polyoxetanes possess a wide temperature range for the liquid crystal phase, about 120°C, and the Sc* phase range can be up to 95°C. However, the position of the biphenyl unit will not affect the spontaneous polarization of the synthesized side chain FLC polyoxetanes. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2843–2855, 1997     

Long-term permeation properties of poly(1-trimethylsilyl-1-propyne) membranes in hydrocarbon—Vapor environment

Poly(1-trimethylsilyl-1-propyne) (PTMSP), a high free-volume glassy di-substituted polyacetylene, has the highest gas permeabilities of all known polymers. The high gas permeabilities in PTMSP result from its very high excess free volume and connectivity of free volume elements. Permeability coefficients of permanent gases in PTMSP decrease dramatically over time due to loss of excess free volume. The effects of aging on gas permeability and selectivity of PTMSP membranes continuously exposed to a 2 mol % n-butane/98 mol % hydrogen mixture over a period of 47 days are reported. The permeation properties of PTMSP membranes are quite stable when the polymer is continuously exposed to a gas mixture containing a highly sorbing organic vapor such af n-butane. The n-butane/hydrogen selectivity was essentially constant for the 47-day test period at a value of 29, or 88% of the initial value of the as-cast film of 33. Condensable gases such as n-butane may serve as a “filler” in the nonequilibrium free volume of the polymer, thereby preserving the high level of excess free volume. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1483–1490, 1997     

Ethylbenzene solubility,diffusivity, and permeability in poly(dimethylsiloxane)

The pure‐gas sorption, diffusion, and permeation properties of ethylbenzene in poly(dimethylsiloxane) (PDMS) are reported at 35, 45, and 55 °C and at pressures ranging from 0 to 4.4 cmHg. Additionally, mixed‐gas ethylbenzene/N₂ permeability properties at 35 °C, a total feed pressure of 10 atm, and a permeate pressure of 1 atm are reported. Ethylbenzene solubility increases with increasing penetrant relative pressure and can be described by the Flory–Rehner model with an interaction parameter of 0.24 ± 0.02. At a fixed relative pressure, ethylbenzene solubility decreases with increasing temperature, and the enthalpy of sorption is −41.4 ± 0.3 kJ/mol, which is independent of ethylbenzene concentration and essentially equal to the enthalpy of condensation of pure ethylbenzene. Ethylbenzene diffusion coefficients decrease with increasing concentration at 35 °C. The activation energy of ethylbenzene diffusion in PDMS at infinite dilution is 49 ± 6 kJ/mol. The ethylbenzene activation energies of permeation decrease from near 0 to −34 ± 7 kJ/mol as concentration increases, whereas the activation energy of permeation for pure N₂ is 8 ± 2 kJ/mol. At 35 °C, ethylbenzene and N₂ permeability coefficients determined from pure‐gas permeation experiments are similar to those obtained from mixed‐gas permeation experiments, and ethylbenzene/N₂ selectivity values as high as 800 were observed. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1461–1473, 2000     

Chemical structure-transport behavior relationship for polyimides and copolyimides based on rigid and flexible dianhydrides

Gas-separation membrane characteristics of a number of new polyimides containing common dianhydride and diamine moieties, including two copolymers of the regular structure, have been investigated. The densities of polymer films have been measured, and the permeability and diffusion coefficients of H₂, CO, CO₂, and CH₄ gases have been estimated. The values of free volume, solubility coefficients of these gases, and selectivities of gas separation have been determined. The transport parameters of polyimides depend on the combination of rigid and flexible dianhydride and diamine fragments. The combination of rigid dianhydride fragments with rigid diamine moieties and of flexible dianhydride fragments with symmetric flexible diamine moieties is the most promising for membrane applications.     

Copolyimides containing alicyclic and fluorinated groups: Solubility and gas separation properties

A series of polyimides with alicyclic and fluorinated moieties previously synthesized were studied for gas separation applications. The solubility behavior of polyimides in various solvents was analyzed through the solubility parameter approach. Permeability coefficients and ideal selectivities were determined for common gases, that is, He, H₂, O₂, and N₂. Polyimide permeabilities were correlated to an improvement of the soluble character and were increased by the introduction of both alicyclic and fluorinated structures. The effect of the casting solvent on gas separation properties was also pointed out. It was found that it is enhanced with increasing diameters for the gas molecules. Finally, some correlations between permeability coefficients and microstructural parameters were discussed. The probability of correlation appears to be also dependent on the diameter and on the polarizability of the gas molecule. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2413–2426, 2005.     

Transport properties of thermoplastic/thermoset blends

Gas transport properties are reported for two series of films prepared from initially miscible thermoplastic/thermoset blends, respectively, polystyrene PS/thermoset and poly(2,6 dimethyl 1,4 phenylene oxide) PPE/thermoset blends. The thermoplastic contents are such that in both cases, after the phase separation, the continuous phase is the thermoplastic‐rich phase and scanning electron microscopic photomicrographs clearly evidenced the dispersion of thermoset‐rich nodules in the continuous thermoplastic‐rich phase with a more tortuous morphology in the case of PPE based films. Permeability measurements were made for O₂ and CO₂ at 20°C and a reduction in permeability coefficients was observed with increased thermoset content. Analysis using Maxwell law suggests that for all thermoplastic/thermoset blends, the thermoset particles can be considered as impermeable to gas and that the diffusion takes place in the continuous phase. In the case of PPE based films, the higher decrease of permeability than that predicted by the law has been related to the morphology of the blends and thus the tortuosity and to a partial miscibility of the thermoset in the thermoplastic. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 473–483, 1999     

Interdiffusion measurements of modified poly(arylether sulfone)s using nuclear reaction analysis

The interdiffusion and miscibility behavior of three different types of modified poly(arylether sulfone)s with deuterated poly(arylether sulfone) is studied by depth profiling using the nuclear reaction D(³He, α)p. The diffusion coefficients are found to be in the range of 10⁻¹⁵ and 10⁻¹⁴ cm²/s at 195°C. A random copolymer of poly(arylether sulfone) containing 4,4-bis-(4′-hydroxyphenyl)valeric acid units is only partially miscible with deuterated poly(arylether sulfone) when the comonomer content is 8.8 mol %, whereas blends with comonomer contents of 1.7 and 4.5 mol % are miscible as indicated by complete interdiffusion. The transition from miscibility to immiscibility is caused by repulsive interactions of copolymer segments and can be explained in terms of a mean-field theory of random copolymer blends. Also, poly(arylether sulfone)s grafted with 0.4 wt % maleic anhydride or having pyromellitic anhydride endgroups are miscible with deuterated poly(arylether sulfone)s. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2083–2091, 1997     

Consideration on formation mechanism of aromatic polyamide hollow spheres prepared by reaction‐Induced phase separation

Hollow spheres of poly(1,4‐phenylene‐5‐hydroxyisophthalamide) had been obtained by the reaction‐induced phase separation during polymerization of 5‐hydroxyisophthalic acid and 1,4‐phenylene diamine in an aromatic solvent. In this study, formation mechanism of the hollow spheres was considered from the view points of eliminated small molecules, polymer structure, and cross‐linking reaction. With respect to the eliminated small molecules, water was the most desirable to form gas‐bubbles in droplets compared with methanol and acetic acid, due to the insolubility into the polymerization system. Rigid polymer structure was also needed to prepare hollow spheres owing to the rapid solidification of droplets. Further, phenolic hydroxyl group in 5‐hydroxy‐1,3‐phenylene moiety caused the ester‐amide exchange reaction to form cross‐linked skin layer in the droplets. The efficient formation of the skin layer was important to encapsulate gas‐bubbles in the droplets, resulting in the formation of hollow structure. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1966–1974     

共聚聚酰亚胺膜材料的合成及其气体渗透性能研究

以2,2′-双(3,4-二羧基苯基)六氟丙烷二酐(6FDA)作为二酐单体,1,3-苯二胺(mPDA)和2,6-二氨基甲苯(2,6-DAT)为二胺单体,采用溶液共缩聚方法合成了一系列新型共聚聚酰亚胺(6FDA-2,6-DAT/mPDA),该类聚合物均能溶于DMF、DMAc、NMP等极性非质子溶剂中,具有较好的成膜性.测试了H2、N2、O2、CH4、CO25种气体在6FDA-2,6-DAT/mPDA共聚聚酰亚胺致密膜中的渗透性能.结果显示,该系列共聚物具有优异的分离性能.在35℃,0.2 MPa下,H2/N2、O2/N2、CO2/CH4的分离性能均接近或突破Robeson上限.     

Gas sorption,diffusion, and permeation in poly(dimethylsiloxane)

The permeability of poly(dimethylsiloxane) [PDMS] to H₂, O₂, N₂, CO₂, CH₄, C₂H₆, C₃H₈, CF₄, C₂F₆, and C₃F₈, and solubility of these penetrants were determined as a function of pressure at 35 °C. Permeability coefficients of perfluorinated penetrants (CF₄, C₂F₆, and C₃F₈) are approximately an order of magnitude lower than those of their hydrocarbon analogs (CH₄, C₂H₆, and C₃H₈), and the perfluorocarbon permeabilities are significantly lower than even permanent gas permeability coefficients. This result is ascribed to very low perfluorocarbon solubilities in hydrocarbon‐based PDMS coupled with low diffusion coefficients relative to those of their hydrocarbon analogs. The perfluorocarbons are sparingly soluble in PDMS and exhibit linear sorption isotherms. The Flory–Huggins interaction parameters for perfluorocarbon penetrants are substantially greater than those of their hydrocarbon analogs, indicating less favorable energetics of mixing perfluorocarbons with PDMS. Based on the sorption results and conventional lattice solution theory with a coordination number of 10, the formation of a single C₃F₈/PDMS segment pair requires 460 J/mol more energy than the formation of a C₃H₈/PDMS pair. A breakdown in the geometric mean approximation of the interaction energy between fluorocarbons and hydrocarbons was observed. These results are consistent with the solubility behavior of hydrocarbon–fluorocarbon liquid mixtures and hydrocarbon and fluorocarbon gas solubility in hydrocarbon liquids. From the permeability and sorption data, diffusion coefficients were determined as a function of penetrant concentration. Perfluorocarbon diffusion coefficients are lower than those of their hydrocarbon analogs, consistent with the larger size of the fluorocarbons. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 415–434, 2000     

Synthesis and properties of sulfur‐contained poly(silylene arylacetylene)s

Poly(silylene arylacetylene) (PSA) is a kind of poly(arylacetylene) silicon‐containing resins with excellent heat resistance and good mechanical performances. In this article, the sulfur atom is introduced into the main chain of the PSA molecule to obtain a sulfur‐containing poly(silylene arylacetylene), named S‐PSA. By Williamson and Sonogashira reactions, bis(4‐ethynylphenyl)sulfide and bis(4‐ethynylphenyl)sulfone were synthesized. Thereafter, through Grignard reagent way, the poly(silylene ethynylene phenylene sulfide phenylene ethynylene) (PSESE) and poly(silylene ethynylene phenylene sulfone phenylene ethynylene) (PSESO₂E) were synthesized from bis(4‐ethynylphenyl)sulfide, bis(4‐ethynylphenyl)sulfone, and methylphenyl dichlorosilane. Poly(silylene ethynylene phenylene sulfoxide phenylene ethynylene) (PSESOE) was synthesized by the oxidation of PSESE. The structures and properties of these resins were characterized and the mechanical properties of the T300 reinforced composites were tested. The results show that the novel S‐PSA resins have excellent heat resistance and good mechanical properties, and could be used as resin matrices for high‐performance composites in high‐tech fields. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2324–2332     

Investigation of gas transport and other physical properties in relation to the bromination degree of polymers of intrinsic microporosity

In this work, the synthesis of novel polymers of intrinsic microporosity (PIMs) with different degrees of bromine substitution by a free-radical substitution reaction was performed. The synthesized polymers were thoroughly characterized and their bromination degree was verified via nuclear magnetic resonance. The brominated PIMs were investigated by infrared spectroscopy, X-ray diffraction, and density measurements and correlated with their gas transport properties. It was found that with an increase in the bromination degree, the synthesized PIMs exhibited a significant increase in polymer chain packing density which led to reduced fractional free volume and consequent decrease in gas diffusion and permeability coefficients. The change in permeability coefficients caused an improvement in the CO₂/N₂, CO₂/CH₄, and O₂/N₂ ideal permeability selectivities. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2752–2761