Ring-opening polymerization of six- and seven-membered cyclic pseudoureas

The cationic ring-opening polymerization of six-membered cyclic pseudoureas, 2-(1-pyrrolidinyl)- ( 2a ) and 2-morpholino-5,6-dihydro-4H-1,3-oxazine ( 2b ), was examined, which proceeded in two different ways, depending on the nature of initiator. The polymerization of 2 with methyl p-toluenesulfonate or trifluoromethanesulfonate (MeOTf) produced poly[(N-carbamoylimino)trimethylene], while that with benzyl chloride or bromide or methyl iodide gave a polymer consisting of 1,3-diazin-2-one-1,3-diylalkylene unit (the main component) and (N-carbamoylimino)trimethylene unit. The cationic ring-opening polymerization of seven-membered cyclic pseudourea, 2-(1-pyrrolidinyl)-4,5,6,7-tetrahydro-4H-1,3-oxazepine ( 3 ) was also examined. The polymerization of 3 with MeOTf as initiator gave poly{[N-(1-pyrrolidinycarbonyl)imino]tetra-methylene}. With benzyl chloride, on the other hand, no polymerization of 3 proceeded but, instead, the quantitative isomerization of 3 to 1,1′-carbonyldipyrrolidine took place. The polymerization mechanism of 2 and 3 as well as the isomerization mechanism of 3 were discussed with comparing them to the polymerization mechanism of five-membered pseudoureas. © 1977 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 933–945, 1997     

Cationic ring-opening polymerizations of cyclic ketene acetals initiated by acids at high temperatures

Three unsubstituted cyclic ketene acetals (CKAs), 2-methylene-1,3-dioxolane, 1a , 2-methylene-1,3-dioxane, 2a , and 2-methylene-1,3-dioxepane, 3a , undergo exclusive 1,2-addition polymerization at low temperatures, and only poly(CKAs) are obtained. At higher temperatures, ring-opening polymerization (ROP) can be dominant, and polymers with a mixture of ester units and cyclic ketal units are obtained. When the temperature is raised closer to the ceiling temperature (T_c) of the 1,2-addition propagation reaction, 1,2-addition polymerization becomes reversible and ring-opened units are introduced to the polymer. The ceiling temperature of 1,2-addition polymerization varies with the ring size of the CKAs (lowest for 3a , highest for 2a ). At temperatures below 138°C, 2-methylene-1,3-dioxane, 2a , underwent 1,2-addition polymerization. Insoluble poly(2-methylene-1,3-dioxane) 100% 1,2-addition was obtained. At above 150°C, a soluble polymer was obtained containing a mixture of ring-opened ester units and 1,2-addition cyclic ketal units. 2-Methylene-1,3-dioxolane, 1a , polymerized only by the 1,2-addition route at temperatures below 30°C. At 67–80°C, an insoluble polymer was obtained, which contained mostly 1,2-addition units but small amounts of ester units were detected. At 133°C, a soluble polymer was obtained containing a substantial fraction of ring-opened ester units together with 1,2-addition cyclic ketal units. 2-Methylene-1,3-dioxepane, 3a , underwent partial ROP even at 20°C to give a soluble polymer containing ring-opened ester units and 1,2-addition cyclic ketal units. At −20°C, 3a gave an insoluble polymer with 1,2-addition units exclusively. Several catalysts were able to initiate the ROP of 1a, 2a , and 3a , including RuCl₂(PPh₃)₃, BF₃, TiCl₄, H₂SO₄, H₂SO₄ supported on carbon, (CH₃)₂CHCOOH, and CH₃COOH. The initiation by Lewis acids or protonic acids probably occurs through an initial protonation. The propagation step of the ROP proceeds via an S_N2 mechanism. The chain transfer and termination rates become faster at high temperatures, and this may be the primary reason for the low molecular weights (M_n ≤ 10³) observed for all ring-opening polymers. The effects of temperature, monomer and initiator concentration, water content, and polymerization time on the polymer structure have been investigated during the Ru(PPh₃)₃Cl₂-initiated polymerization of 2a . High monomer concentrations ([M]/[ln]) increase the molecular weight and decreased the amount of ring-opening. Higher initiator concentrations (Ru(PPh₃)₃Cl₂) and longer reaction times increase molecular weight in high temperature reactions. Successful copolymerization of 2a with hexamethylcyclotrisiloxane was initiated by BF₃OEt₂. The copolymer obtained displayed a broad molecular weight distribution; M̄_n = 6,490, M̄_w = 15,100, M̄_z = 44,900. This polymer had about 47 mol % of ( Me₂SiO ) units, 35 mol % of ring-opened units, and 18 mol % 1,2-addition units of 2a . © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3655–3671, 1997     

Ring-opening polymerization of cyclic carbonates by alcohol–acid catalyst

Ring-opening reactions of 1,3-dioxepan-2-one ( 1 ) and 1,3-dioxan- 2 -one (2) with several alcohols were examined. The reactions proceeded without trifluoroacetic acid (TFA) in low conversions, while they proceeded smoothly with TFA to afford the ring-opened adducts and oligomers. Ring-opening polymerizations of 1 and 2 were also carried out by alcohol–acid catalysts to afford the corresponding polycarbonates (M _n = 2500−6800). The molecular weights increased with increase of the conversions of 1 and 2. The observed polymerization rates of 1 and 2 were determined as 24.4 × 10⁻⁶ and 0.8 × 10⁻⁶ s⁻¹, respectively. Mechanistic aspects were studied by NMR spectroscopy. The methylene protons α and β to the carbonate moieties shifted to lower fields in 0.06–0.11 ppm in the ¹H-NMR spectra by the addition of TFA. Downfield shifts of the carbonyl carbon signals of 1 and 2 were observed in 3.94–4.15 ppm in the ¹³C-NMR spectra. These results strongly suggest that the cyclic carbonates are activated by TFA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2463–2471, 1998     

Radical polymerization behavior of a vinyl monomer bearing five‐membered cyclic carbonate structure and reactions of the obtained polymers with amines

Radical polymerization behavior of a vinyl substituted cyclic carbonate, 4‐phenyl‐5‐vinyl‐1,3‐dioxoran‐2‐one ( 1 ), is described. Radical polymerization of 1 proceeded through selective vinyl polymerization to produce polymers bearing carbonate groups in the side chain, in contrast to that of an oxirane analogue of 1 , 1‐phenyl‐2‐vinyl oxirane that proceeds via the selective ring‐opening fashion. Although the homopolymerization of 1 produce polymers in relatively lower yield, copolymerizations effectively provided cyclic carbonate‐containing copolymers. Nucleophilic addition of primary amines to the resulting homopolymers and copolymers produced the corresponding multifunctional polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 584–592, 2005     

Cyclic(arylene ether) oligomers containing the phenylphosphine oxide moiety

A series of cyclic(arylene ether) oligomers containing the phenylphosphine oxide moiety has been synthesized by reaction of bis(4-fluorophenyl)phenylphosphineoxide with dihydroxy compounds 1a–d as well as 1,2-dihydro-4-(4-hydroxyphenyl) (2H)phthalazin-1-one in DMF in the presence of anhydrous K₂CO₃ under high dilution conditions. These cyclic oligomers are amorphous and have high solubility in organic solvents. The MALDI-TOF-MS technique has been used as a powerful tool to analyze these cyclic systems. The cyclic(arylene ether) oligomers readily undergo anionic ring-opening polymerization in the melt at 350°C by using potassium 4,4′-biphenoxide as the initiator, affording linear, high molecular weight poly(arylene ether)s containing the phenylphosphine oxide moiety. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 519–526, 1998     

Isolation,spectra, structure,and ring-opening polymerization of strained macrocyclic aryl(ether ketone) dimer

Macrocyclic arylene ether ketone dimer was isolated from a mixture of cyclic oligomers obtained by the nucleophilic substitution reaction of bisphenol A and 4,4′-difluorobenzophenone and easily polymerized to high molecular weight linear poly-(ether ketone). The cyclic compound was characterized by FTIR, ¹H- and ¹³C-NMR, and single-crystal x-ray diffraction. Analysis of the spectral and crystal structure reveals extreme distortions of the phenyl rings attached to the isopropylidene center and of the turning points of the molecular polygons. The release of the ring strain on ring-opening combined with entropical difference between the linear polymer chain and the more rigid macrocycle at temperatures of polymerization may be the proposed motivating factors in the polymerization of this precursor to high molecular weight poly(ether ketone). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1753–1761, 1997     

First observation of equilibrium polymerization of cyclic sulfite

Cationic polymerization of a seven-membered cyclic sulfite ( 7CS ) was carried out with methyl trifluoromethanesulfonate as a catalyst in chlorobenzene. The final conversions of 7CS were 22, 41, 52, and 60% in the polymerizations at 25°C with the initial monomer concentrations of 3, 4, 5, and 6M, respectively. The calculated monomer concentration at equilibrium was evaluated as 2.4M in any case. The conversion of 7CS decreased as the polymerization temperature rose. These results support the fact that this polymerization is an equilibrium one. ΔH⁰ and ΔS⁰ in the polymerization were evaliuated as −0.765 kcal/mol and −4.18 cal/mol by Dainton's equation, respectively. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3235–3240, 1997     

Novel photoinitiated cationic copolymerizations of 4-methylene-2-phenyl-1,3-dioxolane

Photoinitiated polymerization of 4-methylene-2-phenyl-1,3-dioxolane ( 1 ) was carried out using either tris (4-methylphenyl) sulfonium hexafluoroantimonate or 4-decyloxyphenyl phenyliodonium hexafluoroantimonate as initiators. ¹H-NMR analyses confirmed exclusive ring-opening while DSC and SEC were used to determine the glass transition temperatures (T_gs) and molecular weights, respectively. Photoinitiated cationic copolymerizations of 1 were investigated with several acyclic and cyclic monomers. Copolymerization of 1 with vinyl ethers and a spiroorthoester resulted in copolymers whose thermal properties were dependent on comonomer ratios. Copolymers of 1 and dihydrofuran or dihydropyran afforded soluble polymers with T_gs significantly higher than the homopolymer of 1 . © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2207–2219, 1997     

Synthesis and properties of functional aliphatic polycarbonates

Two, functional, cyclic carbonate monomers, 5‐methyl‐5‐methoxycarbonyl‐1,3‐dioxan‐2‐one and 5‐methyl‐5‐ethoxy carbonyl‐1,3‐dioxan‐2‐one, were synthesized starting from 2,2‐bis(hydroxymethyl) propionic acid. The ring‐opening polymerization of the cyclic carbonate monomers in bulk with stannous 2‐ethylhexanoate as a catalyst under different conditions was examined. The results showed that the yield and molecular weight of polycarbonates were significantly influenced by the reaction conditions. The polycarbonates obtained were characterized by IR, ¹H NMR, and differential scanning calorimetry. Their molecular weight was measured by gel permeation chromatography. The in vitro biodegradation and controlled drug‐release properties of the polycarbonates were also investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 4001–4006, 2003     

Molecular weight distribution of polyamides obtained in anionic polymerization of methyl-substituted β-lactams and aminolysis of their N-benzoyl lactams

The anionic ring-opening polymerization of 3-methyl-2-azetidinone ( 3 ) in a mixture of N,N-dimethylacetamide with lithium chloride proceeded quantitatively in a homogeneous phase at 25°C, as well as the living anionic polymerization of 3,3-dimethyl-, 4,4-dimethyl-2-azetidinone ( 1 and 2 respectively) in a similar condition. However, the molecular weight dispersion of the polyamide obtained from 3 was found to be higher than that obtained from 1 and 2. The aminolysis reaction of their N-benzoyllactams and N-acyllactams corresponding to their growing species with benzylamine was investigated kinetically, and one of the reasons for broadening of the molecular weight distribution of the polyamide obtained in the anionic polymerization of 3 was speculated to result from a low value of the ratio of the initiation reaction constant to the propagation one. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1831–1838, 1997     

Detailed study of the ring-opening metathesis polymerization of norbornene bearing a five- or six-membered ring cyclic carbonate along with volume expansion

The ring-opening metathesis polymerization (ROMP) of norbornene derivatives bearing five- or six-membered cyclic carbonate ( 2 or 3 ) was carried out with a typical ruthenium catalyst [bis(tricyclohexylphosphine)benzylidene ruthenium(IV) dichloride], the so-called first-generation Grubbs catalyst, under various reaction conditions, to smoothly obtain the corresponding polyalkenamers ( 5 and 6 ) along with volume expansion. The number-average molecular weights (M_n's), 10% weight loss decomposition temperatures, glass-transition temperatures (T_g's), and volume expansion ratios of the resulting products depended on the polymerization conditions. The degree of volume expansion was mainly affected by M_n, T_g, and the cis/trans configuration of the exocyclic double bonds of the resulting polymers. The volume expansion was confirmed to specifically occur during the polymerization of the monomer bearing cyclic carbonate moieties, and similar ROMPs of monomers without cyclic carbonate, such as norbornene itself, the monomer 5,5-bis(methoxymethyl)bicyclo[2.2.1]hept-2-ene, and the monomer endo-N-methylbicyclo[2.2.1]hept-5-ene-2,3-dicarboxylimide, proceeded along with volume shrinkage. Furthermore, an investigation of another type of polymerization, a vinyl-type one, of monomer 2 suggested that the volume expansion specifically took place in the ring-opening type of polymerization. In addition, the Sc(OTf)₃-mediated cationic ring-opening reaction of the cyclic carbonate moiety of polyalkenamer 5 smoothly proceeded along with volume expansion or nearly zero volume shrinkage to yield the corresponding networked polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 395–405, 2006     

Controlled cationic ring‐opening polymerization of cyclic thiocarbonates with ester groups

This work deals with the cationic ring‐opening polymerization of the cyclic thiocarbonates 5‐benzoyloxymethyl‐5‐methyl‐1,3‐dioxane‐2‐thione ( 1 ), 5,5‐dimethyl‐1,3‐dioxane‐2‐thione ( 2 ), and 4‐benzoyloxymethyl‐1,3‐dioxane‐2‐thione ( 3 ). The polymerization was carried out with 2 mol % trifluoromethanesulfonic acid, methyl trifluoromethanesulfonate, boron trifluoride etherate, or triethyloxonium tetrafluoroborate as the initiator to afford the polythiocarbonate with a narrow molecular weight distribution accompanying isomerization of the thiocarbonate group. The molecular weight of the obtained polymer could be controlled by the feed ratio of the monomer to the initiator and increased when the second monomer was added to the polymerization mixture after the quantitative consumption of the monomer in the first stage. The block copolymerization of 2 and 3 was also achieved, and this supported the idea that the cationic ring‐opening polymerization of these monomers proceeded via a living process. The order of the polymerization rate was 3 > 2 > 1 . The cationic ring‐opening polymerization of 1 and 3 involved the neighboring group participation of ester groups according to the polymerization rate and molecular orbital calculations with the ab initio method. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 185–195, 2003     

Synthesis of degradable crosslinked polymers based on 1,5-dioxepan-2-one and crosslinker of bis-ϵ-caprolactone type

Poly(lactones) may be crosslinked by ring-opening polymerization of the corresponding cyclic esters in the presence of tetrafunctional bis(ϵ-caprolactone). The homopolymer of 1.5-dioxepan-2-one (DXO) has poor mechanical properties but also some very good properties, such as biocompatibility and degradability. Crosslinking of degradable polymer based on the poly(ether-ester) DXO was performed with crosslinkers having the same reactivity as the monomer. 2,2-Bis(ϵ-caprolactone-4-yl)propane (BCP) and bis(ϵ-caprolactone-4-yl) (BCY) with tetrafunctionalities were synthesized from the corresponding diols and then used as comonomers during the polymerization of DXO. The comonomers showed the same reactivity to the initiator, stanneous 2-ethylhexanoic acid, as DXO and perfectly random crosslinked films were obtained. The crosslinked films showed a high degree of swelling already at 2–3 mol % BCP or BCY. The BCP crosslinker was somewhat less soluble in DXO at lower temperatures, but all BCP was soluble at 180°C. These polymeric films were elastic with no crystallinity and the T_g values increased from −39°C for pure DXO to −35°C for BCP crosslinked films and −21°C for BCY crosslinked ones. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1635–1649, 1997     

BF3·OEt2-initiated polymerization of 2-methylene-1,3-dioxepanes

BF₃·OEt₂-initiated polymerizations of 2-methylene-1,3-dioxepane gave polymers composed of both ring-retained and ring-opened structures. The ring-opening content increased with an increase in polymerization temperature. Poly(4,7-dimethyl-2-methylene-1,3-dioxepane) propagated slower during BF₃·OEt₂-initiated polymerization and had a lower ring-opened content than poly(2-methylene-1,3-dioxepane). The type of acid initiator used also affected the amount of ring opening observed. Stronger acids gave less ring opening. Attempted BF₃·OEt₂-initiated copolymerizations of these seven-membered ring cyclic ketene acetals with isobutyl vinyl ether at room temperature resulted in formation of the two homopolymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 873–881, 1998     

Syntheses and radical ring-opening polymerization behavior of vinylcyclopropanone cyclic acetals having exomethylene and phenyl groups

Syntheses and radical ring-opening polymerizations of vinylcyclopropanone derivertives having cyclic six-membered acetal, exomethylene, and phenyl groups; 1-vinyl-6-methylene-4,8-dioxaspiro[2.5&]octane ( 2b ), 1-vinyl-5,7-dimethyl-6-methylene-4,8-dioxaspiro[2.5]octane ( 2c ), 1-vinyl-5-phenyl-4,8-dioxaspiro[2.5]octane ( 2d ), and 1-vinyl-5,7-diphenyl-4,8-dioxaspiro[2.5]octane ( 2e ), were carried out. The monomers were prepared by reactions of 1,1-dichloro-2-vinylcyclopropane and the corresponding diols in DMF in the presence of sodium hydride. Radical polymerizations of 2b – 2e were carried out at 60, 80, and 120°C in the presence of an appropriate initiator (3 mol % vs. monomer) in degassed sealed ampoules for 20 h. Although colorless transparent polymers (M̄_n 2300–13,500) were isolated by preparative HPLC for the most monomers, a crosslinked polymer was obtained in the case of 2b . The structures of the polymers were determined to consist of single and double ring-opening units. The content of the double ring-opened unit was 25–75% by comparison of IR spectra to a model compound. It is suggested that the double ring-opened propagating chain end is stabilized by the substituents on the cyclic acetal rings. The two-center energies of the cyclopropane ring and activation energy of ring-opening calculated by molecular orbital methods may explain the selectivity in the cleavage of the cyclopropane ring, and the degree of double ring-opening. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2501–2512, 1997     

Cationic ring‐opening polymerization of six‐membered cyclic carbonates with ester groups

This work deals with the cationic ring‐opening polymerization of the ester‐substituted cyclic carbonates 5‐methyl‐5‐benzoyloxymethyl‐1,3‐dioxan‐2‐one ( CC1 ) and 4‐benzoyloxymethyl‐1,3‐dioxan‐2‐one ( CC4 ). The polymerization was carried out with trifluoromethanesulfonic acid, methyl trifluoromethanesulfonate, boron trifluoride etherate, or methyl iodide as the initiator. The reactivity of CC1 and CC4 was higher than that of 5,5‐dimethyl‐1,3‐dioxan‐2‐one, which had no ester moiety. These results suggest that this ring‐opening polymerization was accelerated by the intramolecular ester group. CC1 showed a higher polymerizability than CC4 , affording a polymer with a higher molecular weight. Additionally, using methyl iodide as the initiator was effective for increasing the molecular weight of the obtained polycarbonate and decreasing decarboxylation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1305–1317, 2001     

Cationic polymerization behavior of seven-membered cyclic sulfite

Cationic ring-opening polymerization behavior of a seven-membered cyclic sulfite ( 1 ) was examined. 1 was prepared by the reaction of 1,4-butanediol with SOCl₂ in 58% yield. The cationic polymerization of 1 was carried out at 0, 25, 60, or 100°C with trifluoromethanesulfonic acid (TfOH), methyl trifluoromethanesulfonate (TfOMe), BF₃ · OEt₂, SnCl₄, methyl p-toluenesulfonate (TsOMe), or MeI as an initiator in bulk under a nitrogen atmosphere to afford the polymer with M̄_n 1000–10,400. The order of activities of the initiators for 1 was as follows, TfOH ≅ TfOMe > SnCl₄ > BF₃ · OEt₂ > TsOMe ≅ MeI. The polymerization of 1 with TfOMe afforded a poly(sulfite) below 25°C, but afforded a polymer containing an ether unit at 60°C, which was formed by a desulfoxylation. The higher the activity of the initiator was, the more easily the desulfoxylation occurred. We expected volume expansion on polymerization because cyclic sulfites have large dipole moment values, but it turned out that 1 showed 4.34% shrinkage on polymerization. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3673–3682, 1997     

Polymers of carbonic acid. XXVII. Macrocyclic polymerization of trimethylene carbonate

2,2-Dibutyl-2-stanna-1,3-dioxepane (DSDOP) was used as cyclic initiator for the polymerization of trimethylene carbonate (TMC). The polymerizations were either conducted in concentrated chlorobenzene solution at 50 and 80°C or in bulk at 60 and 120°C. With monomer/initiator ratios ≤100 the conversion was complete within 2 h at 80°C and within 12 h at 50°C. Variation of the reaction time revealed that the rapid polymerization is followed by a relatively rapid (backbiting) degradation even at 80°C. The polymerizations in bulk at 60°C were somewhat slower than those at 80°C in solution, but the influence of degradation reactions was less pronounced. With optimized reaction time the number average molecular weight (M_n) roughly parallels the monomer/initiator ratio and M_n's up to 100,000 were obtained. In contrast to a classical living polymerization broader polydispersities (1.5–1.7) were found. In the case of 5,5-dimethyltrimethylene carbonate rapid degradation and chain transfer reactions prevented the formation of high molecular weight polymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2179–2189, 1999     

功能聚碳酸酯的合成及表征

脂肪族聚碳酸酯作为生物材料已引起普遍关注,由于其良好的生物相容性、表面溶蚀性和无毒性,在医学领域中得到越来越广泛的应用.迄今已报道的许多脂肪族聚碳酸酯的降解速率相对较慢,如聚三亚甲基碳酸酯的降解速率比聚乳酸和聚己内酯慢很多.但是,如果在聚碳酸酯的侧链上引入亲水性功能基团,其降解速率将会明显提高.     

More about the polymerization of lactides in the presence of stannous octoate

The ring-opening polymerization of lactide cyclic monomers in the bulk in the presence of tin(II) 2-ethylhexanoate (stannous octoate or SnOct₂) was reexamined under conditions allowing for the end group characterization of growing chains by high-resolution ¹H-NMR. Data collected for low values of the monomer/initiator (M/I) ratio showed that the DL -lactide ring was opened to yield lactyl octoate-terminated short chains. A cationic-type mechanism involving co-initiation by octanoic acid was proposed to account for experimental findings. The formation of a side product, hydroxytin(II) lactate (HTL), was found which appeared able to initiate lactide polymerization and to yield a high molecular weight PLA50 polymer. However the polymerization with stannous octoate was faster than the HTL one. Anyhow, data suggested that both SnOct₂ and HTL are likely to act simultaneously as initiators during the polymerization of lactides in the presence of SnOct₂. A complete reaction scheme was proposed to account for the presence of the various compounds likely to be formed under these conditions. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3431–3440, 1997