Molten state reactivity of difunctional cyanates: Thermal and spectroscopic studies by liquid and solid CP-MAS 13C-NMR

Using differential scanning calorimetry, we have investigated three difunctional cyanate monomers differing by their central group: bisphenol A dicyanate (BADCy), bisphenol E dicyanate (BEDCy), and hexafluorinated bisphenol A dicyanate (BAFDCy), to determine the effect of the central group on the molten state reactivity of heat-treated cyanates. To identify the different phenomena occurring during the heat cycle, which was followed by differential scanning calorimetry, ¹³C-NMR (liquid and solid) was undertaken. This technique was used to characterize the major products and side products formed. Using ¹³C-NMR and HPLC, we were able to detect the formation of compounds with a triazine ring at one chain end and a hydroxyl function at the other. The presence of the latter depended on the purity of the initial monomers. In light of the purity parameter, inherent in the synthesis of the products, we propose an order of reactivity, at molten state, of the polymerization of the three cyanate monomers in the temperature range of 180–300°C. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1245–1254 1997     

13C-NMR spectroscopy study of polyurethane obtained from azide hydroxyl-terminated polymer cured with isophorone diisocyanate (IPDI)

Chemical structure investigations of polyurethane binders based on difunctional linear glycidyl azide polymer (GAP) cured with isophorone diisocyanate (IPDI) were performed using ¹³C-NMR spectroscopy in solution. Chemical functions such as urethane, urea, allophanate, and biuret were all expected to be detected in these polymeric binders. ¹³C-NMR assignment of the C O urethane and urea functions were found in these polymers as determined by using model compounds of IPDI. The ¹³C-NMR data gathered in this article can be considered as basic parameters for further characterization of polyurethane structure based on IPDI. Also, ¹³C CP MAS NMR spectra of GAP-IPDI-based polymers were carried out to identify the various chemical functions present in solid polyurethane elastomer. In addition, the curing evolution of a GAP-IPDI-based polymer at 50 and 80°C in bulk was monitored, and the reaction path of the binder was readily determined. Some conclusions on the effects of the cure catalyst and the curing temperature were also drawn. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2991–2998, 1997     

Thermal properties and fracture toughness of epoxy resins cured by phosphonium and pyrazinium salts as latent cationic initiators

In this work, the latent thermal cationic initiators triphenyl benzyl phosphonium hexafluoroantimonate (TBPH) and benzyl‐2‐methylpyrazinium hexafluoroantimonate (BMPH) were newly synthesized and characterized with IR, ¹H NMR, and P NMR spectroscopy. The thermal and mechanical properties of difunctional epoxy [diglycidyl ether of bisphenol A (DGEBA)] resins cured by 1 phr of either TBPH or BMPH were investigated. The DGEBA/TBPH system showed a higher curing temperature and a higher critical stress intensity factor than the epoxy/BMPH system. This could be interpreted in terms of the slow thermal diffusion rate and bulk structure of the four phenyl groups in TBPH. However, the decomposition activation energy derived from the Coats–Redfern method was lower for epoxy/TBPH. This result was probably due to the fact that a broken short‐chain structure was developed by the steric hindrance of TBPH in the difunctional epoxy resin. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2393–2403, 2003     

Isolation,spectra, structure,and ring-opening polymerization of strained macrocyclic aryl(ether ketone) dimer

Macrocyclic arylene ether ketone dimer was isolated from a mixture of cyclic oligomers obtained by the nucleophilic substitution reaction of bisphenol A and 4,4′-difluorobenzophenone and easily polymerized to high molecular weight linear poly-(ether ketone). The cyclic compound was characterized by FTIR, ¹H- and ¹³C-NMR, and single-crystal x-ray diffraction. Analysis of the spectral and crystal structure reveals extreme distortions of the phenyl rings attached to the isopropylidene center and of the turning points of the molecular polygons. The release of the ring strain on ring-opening combined with entropical difference between the linear polymer chain and the more rigid macrocycle at temperatures of polymerization may be the proposed motivating factors in the polymerization of this precursor to high molecular weight poly(ether ketone). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1753–1761, 1997     

NMR study of the structure and properties of poly(MMA-co-VP) crosslinked hydrogels

¹H- and ¹³C-NMR techniques were used to study the microscopic structure of NMA/VP copolymer hydrogels. Evidence was obtained for a plasticization effect of MMA chains by VP. An original ¹H-NMR approach revealed the existence of several types of water with various degree of bounding to the polymer network, a conclusion that is corroborated by a complementary ¹³C-NMR study. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3619–3625, 1997     

Polyesters containing sulfur. V. Preparation and characterization of new polyester–sulfur compositions

New polyester–sulfur compositions with increased tensile strength were obtained by using new thiopolyesters crosslinkable with sulfur, derived from diphenylmethane-4,4′-di(methylthiopropionic acid) and ethanediol (E-P) or 2,2′-oxydiethanol (ODE-P). Such characteristics as hardness, tensile, thermomechanical, as well as some electrical properties were determined. The structure of these compositions was investigated by solid-state ¹³C-NMR spectroscopy. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2231–2238, 1997     

Synthesis and characteristics of the poly(carboxybetaine)s and the corresponding cationic polymers

Two types of carboxybetaines and their corresponding cationic monomers and polymers are synthesized in this study. Comparing the chemical shifts of the methylene groups in the cationic monomers and carboxybetaines in both ¹H- and ¹³C-NMR spectra reveal that the respective methylene groups are clearly distinguished from their chemical shifts in ¹H- and ¹³C-NMR spectra. The solubilities, moisture regain properties, and solution properties of the poly(carboxybetaine)s and cationic polymers are investigated in relation to their molecular structures. Because the cationic polymers were ionized in an aqueous solution, the cationic polymers were more soluble than the poly(carboxybetaine). For the various functional groups of poly(carboxybetaine)s and cationic polymers, the order of tendency for moisture regain is  COO >  CONH . Results obtained from the reduced viscosity for cationic poly(TMMPAMS) are reversed from that for zwitterionic poly(DMAEAPL). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3527–3536, 1997     

Intramolecular cyclization in hyperbranched polyesters

The effect of monomer structure and catalyst on the synthesis of hyperbranched polyesters based on 4,4-(4′-hydroxyphenyl)pentanoic acid has been examined. The nature of the ester group and the catalyst have a significant effect on the molecular weight of the hyperbranched polyester but do not effect the degree of branching for these materials. The fate of the single ester group at the focal point of these hyperbranched macromolecules is probed by the synthesis and polymerization of ¹³C labeled methyl 4,4-(4′-hydroxyphenyl)pentanoate. Comparison of the molecular weights determined by ¹H- or ¹³C-NMR spectra with those determined by osmometry suggest that intramolecular cyclization does not occur to a significant extent in these systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1627–1633, 1997     

Synthesis and characterization of two new cyclobutyl and aryl hydroxyethyl methacrylate monomers and their polymers

Two new hydroxyethyl methacrylates having aryl and cyclobutane rings were synthesized by addition to 1-(epoxyethyl)-3-aryl-3-methylcyclobutane to methacrylic acid. The monomers prepared are 2-(3-methyl-3-phenylcyclobutyl)-2-hydroxyethyl methacrylate (PCHEMA) and 2-(3-methyl-3-mesitylcyclobutyl)-2-hydroxyethyl methacrylate (MCHEMA). Both monomers were polymerized at 60°C in 1,4-dioxane solution using benzoyl peroxide as initiator. Poly(PCHEMA) and poly(MCHEMA) and their monomers were characterized by FT-IR and ¹H- and ¹³C-NMR techniques. Weight average molecular weights of the polymers were determined for poly(PCHEMA) poly(MCHEMA) by gel permation chromatography. Thermal stabilities of the polymers were essentially the same. Glass transition temperatures for poly(PCHEMA) and poly(MCHEMA) were determined as 105 and 137°C, respectively. No changes of the polymers by irradiation with UV light at 254 nm were observed. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2123–2128, 1997     

Characterization of mechanically sheared ethylene–propylene copolymers by high resolution NMR

We report high-resolution solution-state NMR experiments on chain ends generated in ethylene–propylene copolymers by mechanical shearing in an extruder. The use of the higher resolution of the ¹³C-NMR spectrum, in a two-dimensional ¹H-¹³C chemical shift correlation experiment, has allowed the complete resolution and assignment of the olefinic chain-end region of the ¹H-NMR spectrum. Simultaneously, the assignments of the ¹³C olefinic resonances, previously identified [A. C. Kolbert, J. G. Didier, and L. Xu, Macromolecules, 29 , 8591 (1996)] are confirmed. An iterative method for calculating the average molecular weight, based on quantitative measurements of the olefinic ¹H-NMR peak intensities is introduced and these results are compared with measurements from ¹³C-NMR and size exclusion chromatography and correlated to reduced viscosities. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1955–1961, 1997     

Synthesis and impact properties of siloxane–DGEBA epoxy copolymers

Siloxane-incorporated epoxy (ESDG) copolymers were prepared by a hot-melt method. IR, ¹H- and ¹³C-NMR are used to determine the structures. The data on the molecular properties indicate that reaction proceeded with a random polycondensation without involving the opening of the oxirane ring in the epoxy structure. Lowering T_gs with increasing siloxane content in copolymers are observed except for the copolymer modified with PDMS siloxane oligomer. Thermal stability data indicate that siloxane moiety exerts its thermal stability on the copolymer through dissipation of the heat, thus delaying thermal degradation of copolymers. Increasing impact strengths in J/M in the range of 22.0–59.0 are observed for copolymers and the improvement of the impact strength is closely related to the structure and content of siloxane oligomers in copolymers. A rough surface was observed by SEM examination on the propagation surface of the copolymeric impact specimen, while a smooth surface is observed on the unmodified epoxy specimen. The EDX analysis reveals these protruded features are Si-rich segments. The morphological observations suggest the siloxane segment may act as a toughening agent in the epoxy networks, thus contributing to the impact improvement of the copolymers. © 1996 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 34:1907–1922, 1996     

Sucrose-based epoxy monomers and their reactions with diethylenetriamine

Two sets of sucrose-based epoxy monomers, namely, epoxy allyl sucroses (EAS), and epoxy crotyl sucroses (ECS), were prepared by epoxidation of octa-O-allyl and octa-O-crotyl sucroses (OAS and OCS, respectively). Synthetic and structural characterization studies showed that the new epoxy monomers were mixtures of structural isomers and diastereoisomers that contained varying numbers of epoxy groups per sucrose. EAS and ECS can be tailored to contain an average of one to eight epoxy groups per sucrose. Quantitative ¹³C-NMR spectrometry and titrimetry were used independently to confirm the average number of epoxy groups per sucrose. Sucrose-based epoxy monomers were cured with diethylenetriamine (DETA) in a differential scanning calorimeter (DSC), and their curing characteristics were compared with those of diglycidyl ether of bisphenol A (DGEBA) and diepoxycrotyl ether of bisphenol A (DECEBA). EAS and DGEBA cured at 100 to 125°C and exhibited a heat of cure of about 108.8 kJ per mol epoxy. ECS and DECEBA cured at 150 and 171°C, respectively, and exhibited a heat of cure of about 83.7 kJ per mol epoxy. Depending upon the degree of epoxidation (average number of epoxy groups per sucrose) and the concentration of DETA, glass transition temperatures (T_gs) of cured EAS varied from −17 to 72°C. DETA-cured ECS containing an average of 7.3 epoxy groups per sucrose (ECS-7.3) showed no DSC glass transition between −140 and 220°C when the ratio of amine (NH) to epoxy group was 1:1 and 1.5:1. Maximum T_gs obtained for DETA-cured DGEBA and DECEBA polymers were 134 and 106°C, respectively. DETA-cured bisphenol A-based epoxy polymers degraded at about 340°C, as observed by thermogravimetric analysis (TGA). DETA-cured sucrose-based epoxy polymers degraded at about 320°C. Sucrose-based epoxies cured with DETA were found to bind aluminum, glass, and steel. Comparative lap shear tests (ASTM D1002–94) showed that DETA-cured epoxy allyl sucroses with an average of 3.2 epoxy groups per sucrose (EAS-3.2) generated a flexible adhesive comparable in bond strength to DGEBA. However, DETA-cured ECS-7.3 outperformed the bonding characteristics of both DGEBA and EAS-3.2. All sucrose-based epoxy polymers were crosslinked and insoluble in water, N,N-dimethylformamide, tetrahydrofuran, acetone, and dichloromethane. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2397–2413, 1998     

Curing of liquid crystalline epoxy resins with a biguanide

This work extends the authors' investigations on liquid crystalline epoxy resins prepared from diglycidyl ether of 4,4′-dihydroxybiphenyl (DGE-DHBP) and aliphatic dicarboxylic compounds (ADC) or difunctional aromatic compounds. Syntheses and properties of these liquid crystalline epoxy resins are described elsewhere. In this paper a study on the curing reaction of the above mentioned liquid crystalline epoxy resins is presented. Ortho-tolylbiguanide was applied as the curing agent. The curing reactions were investigated by differential scanning calorimetry, microscopic observations and IR spectroscopy. Depending upon the temperature program of curing, it was possible to obtain polymeric networks with liquid crystalline order. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2739–2745, 1997     

Preparation and Optical Properties of Silica-Poly(ethylene oxide) Hybrid Materials

Structural evolution and optical properties of the silica-poly(ethylene oxide) hybrid films prepared from -glycidoxypropyltrimethoxysilane (GPTS) and 1-methylimidazol (MI) are studied. Polymerization of the epoxy groups is achieved by using 1-methylimidazol as a thermal curing agent. In liquid state ¹H &¹³ C NMR spectroscopy, it is found that silica condensation mainly occurs without epoxy ring opening. The epoxide polymerization is confirmed by using FT-IR, solid state CP-MAS ¹³C-NMR, and differential scanning calorimetry (DSC). The hybrid material is densified due to the epoxide polymerization as well as silica condensation with thermal curing. As a result, the thermal curing increases refractive index and extinction coefficient and shifts UV optical absorption edge to longer wavelength.     

Chemically induced phase separation in the preparation of porous epoxy monolith

A methodology for preparing porous epoxy monolith via chemically induced phase separation was proposed. The starting system was a mixture of an epoxy precursor, diglycidyl ether of bisphenol‐A (DGEBA), a curing agent, 4,4′‐diaminodiphenylmethane (DDM), and a thermoplastic polymer, polypropylene carbonate (PPC). As DGEBA was cured with DDM, the system became phase‐separated having PPC particles dispersed in epoxy matrix. After PPC particles were removed by thermal degradation, a porous structure was obtained. The phase separation mechanism was determined by the initial composition and illustrated by a pseudophase diagram. The pore size increased with increasing the concentration of PPC and raising the curing temperature. The intermediate and final morphologies of the system were studied using optical and scanning electron microscopy, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Curing kinetics and thermal stability of epoxy blends containing phosphorous-oxirane with aromatic amide-amine as curing agents

This article describes the synthesis of a series of aromatic amide-amines and their potential use as epoxy hardeners. These amines were synthesized by the reaction of L-phenylalanine（PA） with diamines of different structures i.e.1,4- phenylene diamine（PD）,1,5-diamino naphthalene（N）,4,4’-（9-fluorenyllidene）-dianiline（F）,4,4’-diaminodiphenyl sulphide （DS） and 3,4’-oxydianiline（O） in a stoichiometric ratio（1:1）.Structural characterization of synthesized amide-amines was done with the help of elemental analysis and spectroscopic techniques viz.FT-IR,¹H-NMR and ¹³C-NMR.An epoxy blend was prepared by mixing tris（glycidyloxy） phosphine oxide（TGPO） with conventional epoxy i.e.diglycidyl ether of bisphenol-A（DGEBA） in an equivalent ratio of 2:3 to incorporate phosphorous into the main chain.The curing kinetics of the epoxy blend with synthesized aromatic amide-amines was investigated by non-isothermal DSC technique using multiple heating rate method（5,10,15 and 20 K/min.）.The activation energies were determined by fitting the experimental data into Kissinger and Ozawa kinetic models.The activation energies obtained through Ozawa method were slightly higher than those of Kissinger method but were comparable.However,both the energies were found to be dependent on the structure of amines.The thermal stability and weight loss behavior of isothermally cured thermosets were also investigated using thermogravimetric analysis（TGA） in nitrogen atmosphere.All the samples showed improved thermal stability in terms of char yield than using only amines as hardeners.     

Preparation,thermal properties,and flame retardance of epoxy–silica hybrid resins

A novel epoxy system was developed through the in situ curing of bisphenol A type epoxy and 4,4′‐diaminodiphenylmethane with the sol–gel reaction of a phosphorus‐containing trimethoxysilane (DOPO–GPTMS), which was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with 3‐glycidoxypropyltrimethoxysilane (GPTMS). The preparation of DOPO–GPTMS was confirmed with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. The resulting organic–inorganic hybrid epoxy resins exhibited a high glass‐transition temperature (167 °C), good thermal stability over 320 °C, and a high limited oxygen index of 28.5. The synergism of phosphorus and silicon on flame retardance was observed. Moreover, the kinetics of the thermal oxidative degradation of the hybrid epoxy resins were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2354–2367, 2003     

Preparation of amphiphilic polyisobutylenes-b-polyethylenamines by mannich reaction. II. Study of mannich reaction on model systems

The study of the reactions which take place when α-methyl-ω-phenolpolyisobutylene is polycondensed with triethylenetetramine (TETA) and para-formaldehyde (Mannich condensation) is carried out on model systems including monofunctional [2,4-di-tert-butylphenol ( A ), dibutylamine ( B ), and dodecylamine ( B ′)] and difunctional reactants [4-tert-butylphenol ( A ′) and 1,6-hexamethylenediamine ( B ″)]. With the exception of the A + B system which gives only Mannich condensation, all the systems including at least one difunctional reactant are characterized by side reactions which accompany the Mannich condensation. However, when one of the compounds is monofunctional ( A + B ;′ A ′ + B ′) only nonpolymeric molecules are formed; their structures were determined by ¹H- and ¹³C-NMR spectroscopy. On the other hand, when both reactants are bifunctional ( A ′ + B ; A ′ + TETA) polymers are formed whose monomer units were identified by comparison of their spectra with those of the nonpolymeric molecules. © 1993 John Wiley & Sons, Inc.     

Study on the structure of epoxidized <Emphasis Type="Italic">trans</Emphasis>-1,4-polyisoprene synthesized by heterogeneous and homogeneous method using <Superscript>13</Superscript>C NMR<Superscript>1</Superscript>

A structure study of epoxidized trans-1,4-polyisoprene (ETPI) synthesized by heterogeneous method is carried out using ¹³C-NMR. In this paper, we present a new analytical method for assigning overlapping ¹³C-NMR signals of ETPI in terms of the triad of trans-1,4-isoprene and epoxidized units. The monomer unit sequence distributions in epoxidized fractions of heterogeneous ETPI are detected and compared with those of ETPI synthesized by homogeneous method. Results prove that in less epoxidized polymer (16%), monomer unit sequence distributions in epoxidized fractions of heterogeneous ETPI are randomly distributed. And when the epoxy content is higher than 23%, a certain degree of block structure appears. What’s more, with the increasing of epoxy content, more block structure appears.     

Synthesis and characterization of liquid‐crystalline epoxy and its blend with conventional epoxy

Terephthaloyl chloride was reacted with 4‐hydroxy benzoic acid to get terephthaloylbis(4‐oxybenzoic) acid, which was characterized and further reacted with epoxy resin [diglycidyl ether of bisphenol A (DGEBA)] to get a liquid‐crystalline epoxy resin (LCEP). This LCEP was characterized by Fourier transform infrared spectrometry, ¹H and ¹³C NMR spectroscopy, differential scanning calorimetry (DSC), and polarized optical microscopy (POM). LCEP was then blended in various compositions with DGEBA and cured with a room temperature curing hardener. The cured blends were characterized by DSC and dynamic mechanical analysis (DMA) for their thermal and viscoelastic properties. The cured blends exhibited higher storage moduli and lower glass‐transition temperatures (tan δ_max, from DMA) as compared with that of the pure DGEBA network. The formation of a smectic liquid‐crystalline phase was observed by POM during the curing of LCEP and DGEBA/LCEP blends. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3375–3383, 2003