Radical copolymerization of cyclic diarsine with vinyl monomers

1,2,4,5‐Tetramethyltetrahydrodiarsenine ( 1 ), a cyclic diarsine compound, was stirred with styrene and a catalytic amount of 2,2′‐azobisisobutyronitrile (AIBN) as a radical initiator at 80 °C for 8 h in toluene to give a copolymer containing arsenic atoms in the backbone. The gel permeation chromatography (GPC) chromatogram of the copolymer showed a single peak. The number‐average molecular weight of the copolymer was estimated to be more than 10,000 by GPC analysis (CHCl₃, polystyrene standards). The structure of the copolymer was confirmed by the ¹H NMR and ¹³C NMR spectra. According to the integral ratio of peaks in the ¹H‐NMR spectrum, the content of 1 in the copolymer was smaller compared to the monomer feed ratio of 1 . Radical copolymerization of 1 with methyl methacrylate also provided the corresponding copolymer in the presence of AIBN, whereas copolymerization with vinyl acetate yielded no polymeric material. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3023–3028, 2004     

Polymerization of o‐quinodimethanes. IV. Radical polymerization of 1‐cyano‐o‐quinodimethane in the presence of TEMPO

The radical polymerization behavior of 1‐cyano‐o‐quinodimethane generated by thermal isomerization of 1‐cyanobenzocyclobutene in the presence of 2,2,6,6‐tetramethylpiperidine‐N‐oxide (TEMPO) and the block copolymerization of the obtained polymer with styrene are described. The radical polymerization of 1‐cyanobenzocyclobutene was carried out in a sealed tube at temperatures ranging from 100 to 150 °C for 24 h in the presence of di‐tert‐butyl peroxide (DTBP) as a radical initiator and two equivalents of TEMPO as a trapping agent of the propagation end radical to obtain hexane‐insoluble polymer above 130 °C. Polymerization at 150 °C with 5 mol % of DTBP in the presence of TEMPO resulted in the polymer having a number‐average molecular weight (M_n ) of 2900 in 63% yield. The structure of the obtained polymer was confirmed as the ring‐opened polymer having a TEMPO unit at the terminal end by ¹H NMR, ¹³C NMR, and IR analyses. Then, block copolymerization of the obtained polymer with styrene was carried out at 140 °C for 72 h to give the corresponding block copolymer in 82% yield, in which the unimodal GPC curve was shifted to a higher molecular weight region. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3434–3439, 2000     

Block copolymerization of allene derivatives with 1,3-butadiene by living coordination polymerization with π-allylnickel catalyst

The block copolymerization of allene derivatives (3A–3D) with 1,3-butadiene (2) by [(allyl)NiOCOCF₃]₂ (1) is described. For instance, the living coordination polymerization of phenylallene (3A, 50 equiv) starting from the living poly(2), which was prepared by the polymerization of 2 (160 equiv) by 1, successfully gave a block copolymer of 2 and 3A in high yield. The molecular weight of the block copolymer (4A) in gel permeation chromatography shifted clearly to the higher molecular weight region and kept a unimodal distribution (M_n = 17,400, M_w/M_n = 1.23) in comparison with that of the starting living poly(2) (M_n = 5,600, M_w/M_n = 1.67). The ratio of each segment and the molecular weight of the resulting copolymers could be controlled by the feed ratio of each monomer. The block copolymerization also proceeded successfully by the inverse order of the monomer feeding (i.e., the polymerization of 3A followed by that of 2) to obtain the corresponding block copolymers in high yields. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3916–3921, 1999     

Cationic copolymerization behavior of epoxide and 3‐isochromanone

Cationic copolymerization of n‐butyl glycidyl ether (BGE) and 3‐isochromanone (ICM) was investigated using trifluoromethanesulfonic acid (TfOH) as an initiator at 100 °C. In the copolymerization, the reactive site of ICM with the propagating cation was completely different from that in its homopolymerization: in the former, the propagating cation reacted with the carbonyl oxygen of ICM, while in the latter, the propagating cation reacted with the aromatic ring of ICM. In spite of the potential of ICM to undergo the homopolymerization, in the present copolymerization, ICM was consumed smoothly only in the presence of epoxide. As a result, the copolymerization proceeded in a statistic manner to afford the corresponding copolymer bearing ICM‐derived ester linkages distributed in the main chain. Cationic copolymerization of bisphenol A‐diglycidyl ether and ICM was also performed to synthesize the corresponding networked polymer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4213–4220     

Sequence‐controlled cationic ring‐opening copolymerization of spiroorthocarbonate and oxetane

Pseudo block and triblock copolymers were synthesized by the cationic ring‐opening copolymerization of 1,5,7,11‐tetraoxaspiro[5.5]undecane (SOC1) with trimethylene oxide (OX) via one‐shot and two‐shot procedures, respectively. When SOC1 and OX were copolymerized cationically with boron trifluoride etherate (BF₃OEt₂) as an initiator in CH₂Cl₂ at 25 °C, OX was consumed faster than SOC1. SOC1 was polymerized from the OX‐rich gradient copolymer produced in the initial stage of the copolymerization to afford the corresponding pseudo block copolymer, poly [(OX‐grad‐SOC1)‐b‐SOC1]. We also succeeded in the synthesis of a pseudo triblock copolymer by the addition of OX during the course of the polymerization of SOC1 before its complete consumption, which provided the corresponding pseudo triblock copolymer, poly[SOC1‐b‐(OX‐grad‐SOC1)‐b‐SOC1]. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3233–3241, 2006     

Alternating copolymerization of carbon dioxide and epoxide catalyzed by an aluminum Schiff base–ammonium salt system

The alternating copolymerization of carbon dioxide (CO₂) and cyclohexene oxide (CHO) with an aluminum Schiff base complex in conjunction with an appropriate additive as a novel initiator is demonstrated. A typical example is the copolymerization of CO₂ and CHO with the (Salophen)AlMe ( 1a )–tetraethylammonium acetate (Et₄NOAc) system. When a mixture of the 1a –Et₄NOAc system and CHO was pressurized by CO₂ (50 atm) at 80 °C in CH₂Cl₂, the copolymerization of CO₂ and CHO took place smoothly and produced a high polymer yield in 24 h. From the IR and NMR spectra, the product was characterized to be a copolymer of CO₂ and CHO with an almost perfect alternating structure. The matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analysis indicated that an unfavorable reaction between Et₄NOAc and CH₂Cl₂ and a possible chain‐transfer reaction with concomitant water occurred, and this resulted in the bimodal distribution of the obtained copolymer. With carefully predried reagents and apparatus, the alternating copolymerization in toluene gave a copolymer with a unimodal and narrower molecular weight distribution. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4172–4186, 2005     

Cationic ring‐opening copolymerization behavior of trioxane and seven‐membered cyclic carbonate

Cationic ring‐opening copolymerization behavior of trioxane (TOX) and a seven‐membered cyclic carbonate, 1,3‐dioxepan‐2‐one (7CC) is described. When TOX and 7CC were cationically copolymerized under various feed ratios using trifluoromethane sulfonic acid (TfOH) as an initiator in nitrobenzene at 30 °C, 7CC was consumed faster than TOX and the decarboxylation was accompanied to afford the corresponding polyacetal–polycarbonate type copolymers containing poly(oxytetramethylene) units. The copolymer composition could be controlled by the feed ratio of 7CC, whose increase resulted in the high copolymer composition of the 7CC unit. The solubility of the copolymers increased as the increase of the 7CC content. Thermogravimetric, size‐exclusion chromatographic, and X‐ray analyses of the copolymers suggest that the sequences of the copolymer chains consist of the segments containing the units originated from 7CC and those with TOX unit‐rich compositions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 733–739, 2008     

Living radical copolymerization of styrene/maleic anhydride

Styrene/maleic anhydride (MA) copolymerization was carried out using benzoyl peroxide (BPO) and 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO). Styrene/MA copolymerization proceeded faster and yielded higher molecular weight products compared to styrene homopolymerization. When styrene/MA copolymerization was approximated to follow the first‐order kinetics, the apparent activation energy appeared to be lower than that corresponding to styrene homopolymerization. Molecular weight of products from isothermal copolymerization of styrene/MA increased linearly with the conversion. However products from the copolymerization at different temperatures had molecular weight deviating from the linear relationship indicating that the copolymerization did not follow the perfect living polymerization characteristics. During the copolymerization, MA was preferentially consumed by styrene/MA random copolymerization and then polymerization of practically pure styrene continued to produce copolymers with styrene‐co‐MA block and styrene‐rich block. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2239–2244, 2000     

主链光学活性1-庚烯-一氧化碳共聚物合成与表征

在阳离子钯 配体催化剂的存在下 ,烯烃与一氧化碳 (ＣＯ)交替共聚形成聚酮 ,这是一类非常有用的新材料 ,引起了广泛的关注[1] .合成聚酮有两种引发方式 :自由基引发共聚和过渡金属引发共聚 .在高的温度和压力下 ,用两种方式都可以得到聚酮 ,但其中的一氧化碳含量却随一氧化碳的分压变化[2 ] .随后发现了中性膦 钯催化剂[3 ] ,可在较温和的条件下实施一氧化碳与丙烯的交替共聚 ,且其一氧化碳含量不随一氧化碳分压变化 .高效催化剂主要有三部分组成 ,阳离子钯、弱或非配位的阴离子[4 ] 以及二齿膦或二氮配体[5] .一氧化碳插入过渡金属 碳σ 键…     

Synthesis and radical polymerization of 2-vinyldibenzothiophene

A monomer having dibenzothiophene moiety, 2-vinyldibenzothiophene (1), was prepared by the Ni-catalyzed cross-coupling reaction of vinyl bromide with the Grignard reagent of 2-bromodibenzothiophene. The radical homopolymerization of 1 and the copolymerization with styrene were carried out at 60°C in toluene (1.0M) for 20 h using AIBN (5 mol %) as an initiator to obtain the corresponding polymers in high yields. Thermal analyses of the copolymers showed that both 10% weight loss and glass transition temperatures increase when increasing the content of 1 unit. The monomer reactivity ratio was evaluated as r₁ = 2.55 (1) and r₂ = 0.16 (styrene). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2813–2819, 1997     

Effect of zinc salts on the spontaneous copolymerization of 4-vinylpyridine with various electron-rich vinyl monomers

The spontaneous copolymerization of 4-vinylpyridine (4-VP) complexed with three different zinc salts (chloride, acetate, and triflate) with various electron-rich vinyl monomers (p-methoxystyrene, MeOSt; p-methylstyrene, MeSt; α-methylstyrene, α-MeSt; p-tert-butylstyrene, BuSt; styrene, St) was investigated in methanol at 75°C. Increasing the zinc salt concentration or the nucleophilicity of the electron-rich monomer increased the copolymer yields. All obtained copolymers are characterized by high molecular weight (10⁵) and broad molecular weight distribution. Both ¹H-NMR and elemental analyses confirmed the almost 1 : 1 copolymer structure. Changing the anion of the zinc salt does not have a considerable effect either on the copolymerization rate or on the molecular weight. The proposed mechanism exhibits the formation of a σ-bond between the β-carbons of the two donor–acceptor monomers. This creates the 1,4-tetramethylene biradical intermediate which can initiate the copolymerization reaction. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2787–2792, 1997     

Living copolymerization of ethylene/1‐octene with fluorinated FI‐Ti catalyst

Living copolymerization of ethylene and 1‐octene was carried out at room temperature using the fluorinated FI‐Ti catalyst system, bis[N‐(3‐methylsalicylidene)‐2,3,4,5,6‐pentafluoroanilinato] TiCl₂/dried methylaluminoxane, with various 1‐octene concentrations. The comonomer incorporation up to 32.7 mol % was achieved at the 1‐octene feeding ratio of 0.953. The living feature still retained at such a high comonomer level. The copolymer composition drifting was minor in this living copolymerization system despite of a batch process. It was found that the polymerization heterogeneity had a severe effect on the copolymerization kinetics, with the apparent reactivity ratios in slurry significantly different from those in solution. The reactivity ratios were nearly independent of polymerization temperature in the range of 0–35 °C. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Controlled copolymerization of vinyl acetate with 1‐alkenes and their fluoro derivatives by degenerative transfer

The degenerative transfer copolymerization of vinyl acetate with ethene and higher 1‐alkenes, as well as their fluoro derivatives (R_fCH?CH₂), under mild conditions was carried out using AIBN as the initiator and ethyl iodoacetate as the control agent. The obtained random copolymers were fairly high in alkene content, with high molecular weights and relatively narrow polydispersities. The quasi‐living nature of the copolymerization allowed the synthesis of a block terpolymer by sequential addition of two different 1‐alkene comonomers to a vinyl acetate copolymerization system. The fluorinated side chains of vinyl acetate/fluoro alkene copolymers segregate toward the air‐side of thin films, resulting in advancing water contact angle as high as 114°. 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3728–3736, 2005     

Copolymerization of elemental sulfur with cyclic(arylene disulfide) oligomers

Copolymerization reactions between cyclic(arylene disulfide) oligomers were studied. The cyclic disulfide oligomers derived from 4,4′-isopropylidene bisbenzenethiol gave soluble polysulfanes via copolymerization with S₈. The copolymerization reactions were studied both in solution and melt by GPC and NMR. Solution copolymerization reactions can only form polysulfanes with up to three to four sulfur linkages; however, melt copolymerization reactions gave polysulfanes with up to seven sulfur linkages (average). The melt copolymerization reactions between cyclic disulfide oligomers derived from 4,4′-thiobis(benzenethiol) and S₈ were studied using DSC, TGA, and DMTA. With increasing contents of sulfur in the polysulfanes, T_gs, 5% weight losses by TGA, and tan δ decreased. With seven sulfur linkages in the polymer, it is a rubber with a T_g of 12°C, a 5% weight loss by TGA of 249°C, and tan δ of 44°C, respectively. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2961–2968, 1997     

Spontaneous alternating copolymerization of isobutoxyallene with 4-phenyl-1,2,4-triazoline-3,5-dione

The spontaneous copolymerization of isobutoxyallene ( 1 ) with 4-phenyl-1,2,4-triazoline-3,5-dione ( 2 ) was carried out to afford a copolymer with a number-average molecular weight of 5900–10,300. The copolymer consisted of a 2,3-polymerization unit of 1 and a  NN polymerization unit of 2 , maintaining an alternating character regardless of the monomer feed ratio. The corresponding copolymerization of 1 with 2 in the presence of methanol afforded the adduct of the compounds without the polymer, indicating the generation of a zwitterion of 1 and 2 . © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1564–1571, 2001     

Radical copolymerization of N‐phenylmaleimide and diene monomers in competition with diels–alder reaction

Radical copolymerization of N‐phenylmaleimide (PhMI) is carried out with various diene monomers including naturally occurring compounds and the copolymers are efficiently produced by the suppression of Diels–Alder reaction as the competitive side reaction. Diene monomers with an exomethylene moiety and a fixed s‐trans diene structure, such as 3‐methylenecyclopentene and 4‐isopropyl‐1‐methyl‐3‐methylenecyclohexene, exhibit high copolymerization reactivity to produce a high‐molecular‐weight copolymer in a high yield. The copolymerization of sterically hindered noncyclic diene monomers, such as 2,4‐dimethyl‐1,3‐pentadiene and 2,4‐hexadiene, also results in the formation of a high‐molecular‐weight copolymer in a moderate yield. The NMR spectroscopy reveals that the obtained copolymers consist of predominant 1,4‐repeating structures for the corresponding diene unit. The copolymers have excellent thermal stability, that is, an onset temperature of decomposition over 330 °C and a glass transition temperature over 130 °C. The copolymerization reactivity of these diene monomers is discussed based on the results of the DFT calculations. The efficient copolymer formation in competition with Diels–Alder addition is investigated under various conditions of the temperature, solvents, and initiators used for the copolymerization. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3616–3625.     

Aluminum complex initiated copolymerization of lactones and DL‐lactide to form crystalline gradient block copolymers containing stereoblock lactyl chains

The homopolymerization reactions of several lactones, as well as the copolymerization reactions of DL‐lactide with these lactones were investigated using tridentate Schiff base aluminum complexes as the initiators. ε‐Caprolactone and δ‐valerolactone polymerized efficiently at room temperature to afford polyesters, whereas β‐butyrolactone only gave the corresponding oligomer. The copolymerization reactions of DL‐lactide with caprolactone and valerolactone yielded gradient block copolymers where the lactyl blocks formed crystalline stereoblocks as a consequence of the stereoselective polymerization of DL‐lactide in the presence of the aluminum complexes. These polymerization processes were highly controlled in nature, and block copolymerization where caprolactone copolymerized using poly(DL‐lactide)‐Al complex proceeded. The obtained gradient copolymer containing stereoblock lactyl blocks and caproyl blocks were analyzed using WAXD analysis to uncover existence of the crystalline stereoblock lactyl blocks in the copolymer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2536–2544     

Latent reactive polymers containing isocyanate moiety that show extreme stability under aerobic atmosphere

This article deals with the latent reactive polymers having isocyanate moiety obtained from the radical copolymerization of 2‐propenyl isocyanate ( 2PI ) with styrene, 2PI with methyl methacrylate ( MMA ), and 2‐methacryloyloxyethyl isocyanate ( MOI ) with styrene. The radical copolymerization was carried out in benzene (5.00 M by total monomer) in the presence of AIBN (3.00 mol % of total monomer) at 60 °C for 24 h. The isocyanate moiety in each copolymer was stable at room temperature for more than 6 months under aerobic atmosphere, because no change of the infrared absorption based on isocyanate group of the resulting copolymer at around 2250 cm^?1 was observed. Isocyanate moiety of obtained copolymer (poly( 2PI ‐co‐ St )) reacted with excess diamines or diols at 80 °C in THF solution to afford the crosslinked polymer quantitatively. These results could demonstrate that isocyanate moiety in the copolymers showed thermal and reactive latency. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2448–2453, 2006     

Chemical initiation of graft copolymerization of methyl methacrylate onto styrene–butadiene block copolymer

When a solution containing both styrene–butadiene block copolymer (SBS) and methyl methacrylate is treated with an initiator both homopolymerization of the methyl methacrylate and graft copolymerization of the methyl methacrylate onto the SBS occur. The amount of graft copolymerization depends upon the time and temperature of the reaction, the concentrations of all species, and the identity of the solvent and initiator. The combination of benzoyl peroxide in chloroform gives the highest graft yield and the reaction occurs by removal of an allylic hydrogen from the SBS by the initiator radical and subsequent addition of monomer units to that site; there is a significant solvent effect. Both AIBN and BPO function by the removal of an allylic hydrogen atom from SBS; BPO is able to effect this reaction relatively easily while AIBN can remove the hydrogen atom only with great difficulty and to a limited extent. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 965–974, 1997     

Copolymerization of ethylene–1-Hexene over a thermally pretreated MgCl2/THF/TiCl4 bimetallic catalyst

MgCl₂/THF/TiCl₄ (TT-0) were thermally pretreated at 80°C for 5 min (TT-1) and 60 min (TT-2), and at 108°C for 5 min (TT-3) and 60 min (TT-4). These thermally pretreated catalysts showed comonomer enhancement effects in the ethylene-1-hexene copolymerization, while TT-0 catalyst did not. Comonomer enhancement effect of thermally pretreated catalysts could come from the generation of new active sites and change of its nature after heat treatment. 1-Hexene content in copolymer obtained with TT-1 was higher than those of TT-4 and TT-0. The morphology of homopolyethylene (PE) obtained with TT-1, 2, 3, and 4 was more regular and homogeneous than that of TT-0. This result could be due to the generation of active sites and change of its nature after thermal treatment of bimetallic catalyst. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2769–2776, 1997