Intramolecular cyclization in the polymerization of ABx monomers: Approaches to the control of molecular weight and polydispersity in hyperbranched poly(siloxysilane)

Different approaches to control the molecular weight of hyperbranched poly(siloxysilane) have been explored. Because the intramolecular hydrosilylation competitively consumes the vinyl groups of the monomer and other oligomeric intermediates, the conventional single-batch bulk process generally affords polymer with a relatively low molecular weight (M_w = 5000) in ca. 60% yield. We have developed a progressive slow addition process that effectively increases the molecular weight of the final polymers and improves preparation yield by reducing the occurrence of cyclization. Using this gradual growth method, polymers with molecular weights in the range of 6–86,000 (M_w) and polydispersities in the range 2–15 were easily obtained in yields of ca. 70–80%. More importantly, both the molecular weight and the polydispersity could be controlled by changing the rate of addition or the amount of monomer fed. The slower the addition, or the larger the amount of monomer added, the higher the molecular weight and polydispersity of the resulting polymer. In seeded polymerizations, a similar trend was observed with a maximum M_w near 84,000 and a yield of 80%, values that are very significantly higher than those obtained by the single batch process described earlier. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3193–3201, 1999     

Modification of polysulfone hollow fiber ultrafiltration membranes using hyperbranched polyesters with different molecular weights

A series of hyperbranched polyesters (HBPEs) using trimethylolpropane (TMP) as a core were synthesized via an esterification reaction, and the molecular weights of these HBPEs were 1600, 2260, 3370, and 5170 g/mol, respectively. Then, these HBPEs were added into dope solutions to prepare PSf hollow fiber membranes via a wet‐spinning method. When the HBPE molecule weight increased from 1600 to 5170 g/mol, the initial viscosities of the PSf–HBPE–PEG400–DMAc dope solutions increased, and the shear‐thinning phenomenon of these dope solutions became increasingly obvious. When these dope solutions were immersed into the deionized water, the demixing rate increased with an increase in the HBPE molecule weight at first and then decreased; this results in the increase of membrane porosity and the coexistence of finger‐like and sponge‐like structures. With the addition of HBPE, the start pure water contact angle and the mean effective pore size of the membranes decreased, and the J_w increased. For the mechanical properties of the membranes, the breaking strength and the elongation of the membranes also increased. Copyright © 2015 John Wiley & Sons, Ltd.     

Hemocompatibility and ultrafiltration performance of PAN membranes surface‐modified by hyperbranched polyesters

Maleic anhydride was grafted onto a polyacrylonitrile (PAN) membrane surface via ultraviolet irradiation. Then, hyperbranched polyester, with varying numbers of hydroxyl end‐groups (H20, H30, and H40), was grafted onto the PAN membrane surface by the reaction of hydroxyl groups with anhydride groups of maleic anhydride. The modified membranes were characterized by scanning electron microscopy, static water contact angle, and attenuated total reflectance‐Fourier transform infrared spectroscopy measurements. The modified membranes showed a higher water flux and better antifouling properties than pristine PAN membranes, and their hydrophilicity was significantly improved. Membrane biocompatibility was characterized by platelet adhesion, and the results indicate that the modified membranes exhibited good biocompatibility. Copyright © 2016 John Wiley & Sons, Ltd.     

Rheological and physical properties of aliphatic hyperbranched polyesters

The effects of the size (pseudo‐generation number) and nature of end groups on physical and rheological properties were investigated for a series of hyperbranched polyesters based on an ethoxylated pentaerythritol core and 2,2‐bis‐(hydroxymethyl)propionic acid repeat units. The observed linear dependence of the melt viscosity on the molar mass in the high pseudo‐generation‐number limit indicated that entanglement effects were substantially absent. Moreover, the marked influence of end capping of the end groups on the physical and rheological properties suggested that intermolecular interactions were dominated by contacts between the outer shells of the molecules, in which the end groups were assumed to be concentrated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1218–1225, 2004     

Intramolecular cyclization assistance for fast degradation of ornithine‐based poly(ester amide)s

Inspired by the spontaneous cyclization of ornithine in peptides, polyesters containing protected ornithine (Orn) side chains along the backbone were synthesized and shown to degrade rapidly upon deprotection through intramolecular cyclization. A new ornithine‐based poly(ester amide) PEA 1 and a lysine‐based control PEA 2, both bearing the light‐sensitive protecting group o‐nitrobenzyl alcohol (ONB), were synthesized. Tert‐butyl carbamate (Boc)‐protected versions 1‐Boc and 2‐Boc were also synthesized for proof of concept. GPC confirmed that 1‐Boc degrades over 40 times faster than 2‐Boc following deprotection into the designed intramolecular cyclization products. Finally, TEM visualization of particles made from 1 encapsulating iron oxide nanoparticles reveals complete disruption of nanoparticles and release of payload within a day upon UV irradiation. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3783–3790     

Cyclizations in hyperbranched aliphatic polyesters and polyamides

Hyperbranched aliphatic polyesters of 2,2′-bis-(hydroxymethyl) propanoic acid and hyperbranched aliphatic polyamides obtained from new carboxy- and amino-functionalized caprolactams were studied by NMR spectroscopy and MALDI-TOF mass spectrometry. Ring-chain equilibria taking place through intramolecular hydroxy-ester, carboxy-amide or amine-amide interchanges and leading to the formation of cyclic branches or end-groups were found to exert a predominant influence on the molar mass of these hyperbranched polymers. A number of intra- or intermolecular side reactions, such as the formation of ethers in polyesters and the formation of anhydrides, imides, amidines and secondary amines in polyamides were also detected and resulted in polymer crosslinking on prolonged heating. The existence of such ring-chain equilibria and side-reactions make the control of hyperbranched polymer structure much more difficult than generally accepted.     

Synthesis of photocrosslinkable hyperbranched polyesters and their film properties

Hyperbranched polyesters with terminal methacryloyl groups (HBPEAc) were synthesized by the one‐pot polyaddition of bisphenol A diglycidyl ether and trimesic acid in the presence of methacrylic acid with a number‐average molecular weights of 5100–7700 in 70–83% yields. The photoradical polymerization of HBPEAc was examined in the presence of 2‐methyl‐1‐[4‐(methylthio)phenyl]‐2‐morpholinopropan‐2‐one (Irgacure 907®) as a photoinitiator in the film state upon UV irradiation to afford the corresponding cured films quantitatively. The crosslinking densities of the cured films of HBPEAc were higher than those of the corresponding linear ones, and birefringence cannot be detected for the cured films of HBPEAc because of their random structures. Furthermore, an alkaline‐developable hyperbranched polyester containing pendant carboxyl groups (HBPEAc‐COOH) was prepared by the addition reaction of HBPEAc with cis‐1,2,3,6‐tetrahydrophthalic anhydride, and its patterning properties were examined to give the resolution of a 55‐μm‐line and 275‐μm‐space pattern by UV irradiation with 700 mJ/cm². © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4642–4653, 2005     

Synthesis and characterization of hyperbranched polyesters and polyurethane coatings

Polyurethane (PU) coatings are widely used for variety of high‐performance applications in today's coating technology. The emerging hyperbranched polymers having three‐dimensional morphology have opened a new avenue to tailor the architecture of PU coatings. The methodology followed here is based on preparation of PU coatings from hyperbranched polyester. Initially, different hyperbranched polyester polyols (HPs) were synthesized by varying the hydroxyl‐terminated precursors that is, pentaerythritol, trimethylol propane or glycerol and keeping the diacid that is, adipic acid quantity constant at various mole ratios of 1:0.6, 1:0.8, 1:0.9, and 1:1, respectively. The obtained HPs were characterized by nuclear magnetic resonance (NMR) spectroscopy, matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF)‐mass spectrometry, and Fourier transform‐infrared (FTIR) spectroscopy. The degree of branching and the quantity of different structural units present in the various HPs were calculated by integrating the quaternary carbon and carbonyl zone in ¹³C NMR spectroscopy. The extent of condensation in different HPs was also calculated from ¹H NMR spectra. Later on, NCO‐terminated PU prepolymers (NCO‐PU) were synthesized by reacting HPs with isophorone diisocyanate (IPDI) at NCO/OH ratio of 1.6:1. In the third step, the excess NCO content in the NCO‐capped PU prepolymers were reacted with atmospheric moisture and hyperbranched polyurethane (HPU) coatings were formed. The coating films were analyzed by FTIR and dynamic mechanical thermal analysis instruments. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2673–2688, 2007     

Blends of different linear polyamides with hyperbranched aromatic AB2 and A2 + B3 polyesters

To explore the possible applications of hyperbranched polymers for modifying linear polyamides, two hyperbranched aromatic polyesters characterized as high T_g polymers possessing phenolic end groups were used in melt mixing with partly aromatic polyamide and commercially available aliphatic polyamide‐6, respectively. Different amounts of both hyperbranched polyesters (from 1 wt % up to 20 wt %) were added to the polyamides, and the influence of these hyperbranched polyesters on the properties of the polyamides was investigated. The hyperbranched polyester based on an AB₂ approach was found to be the most effective modifier. A significant increase of the glass transition temperature of the final blend was detected. However, a remarkable reduction of crystallinity as well as complex melt viscosity of those blends was also observed. The use of an A₂+B₃ hyperbranched polyester as melt modifier for the polyamides was less effective for changing the thermal properties, and the complex melt viscosity of the final material increased since heterogeneous blends were formed. In contrast to that, generally, the addition of the AB₂ hyperbranched polyester to the polyamides resulted in homogeneous blends with improved T_g and processability. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3558–3572, 2009     

Thermal degradation of aliphatic hyperbranched polyesters and their derivatives

In this study results of thermal degradation of aliphatic hyperbranched polyesters, AHBP, and their derivatives, determined by non-isothermal thermogravimetric analysis in inert atmosphere (N₂) are presented. The thermal stability of linear polyester PHPA (polyhydroxypivalic acid), additionally synthesized from hydroxypivalic acid, was also studied. AHBP samples, from second to tenth pseudo-generation, were synthesized starting from 2,2-bis(hydroxymethyl)propionic acid and di-trimethylolpropane. Modification of some selected AHBP samples was accomplished with the propionyl and benzoyl chloride, as well as with stearic acid. Thermal degradation of AHBP samples starts in the region between 250 °C and 275 °C and it ends around 430 °C. The thermal stability of AHBP samples increases with the number of end groups in the macromolecule, as well as with the modification of end groups with stearic acid and propionyl chloride. An AHBP sample of the fourth pseudo-generation, where all -OH end groups are modified with benzoyl chloride, shows lower thermal stability than the corresponding unmodified sample. The thermal stability of the linear polyester PHPA is lower than the thermal stability of the AHBP samples of the similar molar mass. The activation energies of thermal degradation for all synthesized AHBP samples were also calculated.     

Heterocyclic Analogs of Pleiadene. 73. Intramolecular Cyclization of Cinnamoyl- and o-Chlorobenzoylperimidines

We have carried out the intramolecular cyclization of the anions of 4(9)- and 6(7)-cinnamoylperimidines and also of 4(9)-o-chlorobenzoylperimidine. These partially hydrogenated pyrido- and quino[1,2,3-cd]perimidines were obtained for the first time. Their ¹H NMR spectroscopic features are discussed.     

Uncommon intramolecular palladium-catalyzed cyclization of indole derivatives

A novel synthetic strategy based on the intramolecular palladium-catalyzed oxidative cyclization reaction, allows the formation of C-C bond and the synthesis of β-carbolinones. The reaction has been performed in the presence of catalytic amount of PdCl₂(CH₃CN)₂ and benzoquinone as a reoxidant.     

ToF‐SIMS for the characterization of hyperbranched aliphatic polyesters: probing their molecular weight on surfaces based on principal component analysis (PCA)

A series of 2,2‐bis(hydroxymethyl)propionic acid (Bis‐MPA) hyperbranched aliphatic polyesters with different molecular weights (generations) is analysed for the first time by time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). The main negative and positive low‐mass fragments are identified in the fingerprint part of the spectra (m/z < 400) and are principally assigned to fragmentation of the Bis‐MPA repeating units. In addition, it is shown that the fragmentation pattern is highly affected by the functional end‐groups. This is illustrated for a phthalic acid end‐capped hyperbranched polymer and for an acetonide‐terminated dendrimer analog. Also, typical fragments assigned to the ethoxylated pentaerythritol core molecule are detected. These ions show decreasing intensities with increasing molecular weight. This intensity dependency on the generation is used to calibrate the molecular weight of hyperbranched polyesters on the surface. To obtain quantitative information, a principal component analysis (PCA) multivariate statistical method is applied to the ToF‐SIMS data. The influence of different normalization procedures prior to PCA calculation is tested, e.g. normalization to the total intensity, to the intensities of ions assigned to the Bis‐MPA repeating unit or to intensities of fragments due to the core molecule. It is shown that only one principal component (PC1) is needed to describe most of the variance between the samples. In addition, PC1 takes into account the generation effect. However, different relationships between the PC1 scores and the hyperbranched mass average molecular weights are observed depending on the normalization procedure used. Normalization of data set ion intensities by ion intensities from the core molecule allows linearization of the SIMS intensities versus the molecular weight and allows the hyperbranched polymers to be discriminated up to the highest generations. In addition, PCA applied to ToF‐SIMS data provides an extended interpretation of the spectra leading to further identification of the correlated mass peaks, such as those of the Bis‐MPA repeating unit (terminal, dendritic and linear) and those of the core molecule. Finally, the work presented demonstrates the extreme potential of the static ToF‐SIMS and PCA techniques in the analysis of dendritic molecules on solid surfaces. Copyright © 2003 John Wiley & Sons, Ltd.     

Percolation model of hyperbranched polymerization

Computer simulations of the step-growth homopolymerization of an AB₂ monomer have been carried out on a square lattice. No rearrangements of units were made between reaction events. Instead, the capture radius, i.e., the maximum distance between the randomly selected unit and its reaction partner was changed. The reaction was considered as controlled either by diffusion and local concentration fluctuations or by the law of mass action (classical limit). The size distribution of polymer species and the extent of cyclization reactions in the polymerization are discussed.     

Intramolecular cyclization and subsequent rearrangements of alkyne-tethered N-heterocyclic carbenes

Alkyne-tethered imidazole and 1,2,4-triazole-based N-heterocyclic carbene precursors have been prepared and studies of the intramolecular reactions of carbenes are performed. Products consistent with intramolecular cyclizations and subsequent rearrangements were observed. Mechanistic studies using crossover experiments showed that the products did arise from intramolecular carbene additions. The reactions are proposed to go through vinylogous diaminocarbene intermediates similar to vinylogous dialkoxycarbenes formed during Boger cycloaddition reactions. Imidazole substituted dienes were observed to be the major products of tandem cyclization and elimination reactions that were observed for imidazole-based N-heterocyclic carbenes.     

Synthesis and characterization of hyperbranched polyesters from glycerol‐based AB2 monomer

This article describes the synthesis of a new glycerol‐based AB₂ type monomer—ethyl{3‐[2‐hydroxy‐1‐(hydroxymethyl)ethoxy]propyl}thioacetate ( 4 ) and its application for the preparation of hyperbranched polyesters. The polycondensation of 4 has been performed over a wide range of catalysts and reaction conditions leading to polymers containing solely primary hydroxyl groups. The polycondensation progress has been monitored by means of ¹H NMR. The degree of branching of the polymers showed to be in the range of 0.5 ± 0.03. The obtained polyesters easily undergo hydrolysis or alcoholysis and may be of interest as recycled materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3860–3868, 2009     

Photoactive,liquid‐crystalline,hyperbranched benzylidene polyesters: Synthesis and characterization

A novel photoactive, liquid‐crystalline, hyperbranched benzylidene polyester (PAHBP) was synthesized from a dilute solution of an A₂ photoactive monomer [bis(4‐hydroxybenzylidene)‐4‐phenyl cyclohexanone] and a B₃ monomer (1,3,5‐benzene tricarboxylic acid chloride) by the solution polycondensation method in the presence of pyridine as a condensing agent. PAHBP was thoroughly characterized by Fourier transform infrared, ¹H and ¹³C NMR, ultraviolet–visible spectrometry, and gel permeation chromatography. The inherent viscosity of the polymer was 0.35 dL/g in tetrahydrofuran. The degree of branching was 0.53, which confirmed the branched architecture of the polymer. Furthermore, thermogravimetric analysis, differential scanning calorimetry, and polarized optical microscopy were used to examine the thermal stability and thermotropic liquid‐crystalline properties of the hyperbranched polyester. The polymer exhibited a nematic mesophase over a wide range of temperatures. The photoreactivity of PAHBP was studied by photolysis under ultraviolet light. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 53–61, 2006     

Curing kinetics of epoxy resins with hyperbranched polyesters as toughening agents

The effects of hyperbranched polyesters on the cure kinetics of diglycidyl ether of bisphenol A (DGEBA) in the presence of m‐phenylene diamine were investigated with nonisothermal differential scanning calorimetry. The results showed that the addition of hyperbranched polyesters enhanced the cure reaction of DGEBA with m‐phenylene diamine, and this resulted in a reduction of the peak temperature of the curing curve and the activation energy because of the low viscosity and large number of terminal hydroxyl groups. However, when linear poly(ethylene glycol) was added, the activation energy of the blends also slightly decreased, whereas the peak temperature of the curing curve increased. The curing kinetics of the blends were calculated by the isoconversional method of Málek. The two‐parameter autocatalytic model (i.e., the ?esták–Berggren equation) was found to be the most adequate for describing the cure kinetics of the studied systems. The obtained nonisothermal differential scanning calorimetry curves showed results in agreement with those theoretically calculated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2649–2656, 2004     

Intramolecular titanium-promoted deoxygenative cyclization to 9-substituted-1,2,3,4-tetrahydrofluorene skeleton

The Mukaiyama aldol reaction of 2-aryl-1-cyclohexene-1-carboxaldehydes with phenyl trimethylsilyl ketene acetal unexpectedly resulted in the formation of 9-substituted-1,2,3,4-tetrahydrofluorene derivatives via a novel intramolecular titanium-promoted deoxygenative cyclization. By successive treatment of the corresponding allyl alcohols with n-butyllithium and titanium tetrachloride, the cyclization products were obtained in good yields.