Synthesis of end-functionalized polystyrenes with organosilicon end-capping reagents via living cationic polymerization

The end-functionalization of living polymers with bases (methanol, benzylamine, diethyl sodiomalonate, and sodium methoxide) and organosilicon compounds [X ? Si(CH₃)₃;X ? : CH₂?C(CH₃)COO? , CH₃COO? , CH₂?CHCH₂? , C₆H₅? ] was investigated in the living cationic polymerization of styrene initiated with the 1-phenylethyl chloride/SnCl₄/nBu₄NCl system in CH₂Cl₂ at ?15°C. The four bases and C₆H₅SiMe₃, independent of their structures, were apparently incapable of reacting with the living end and invariably led to polystyrenes with the ω-end chlorine [～ ～ ～ CH₂CH(Ph)Cl] originated from the initiating system. The number-average end-functionality (F?_n) of the chloride, determined by ¹H-NMR, was close to unity (F?_n > 0.9). The presence of chlorine in the polymer was also confirmed by elemental analysis. In contrast, the quenching by the trimethylsilyl compounds with X = methacryloxy, acetoxy, and allyl gave ω-end-functionalized polystyrenes with the corresponding terminal groups (X) for which the F?_n values were close to unity (F?_n > 0.9). The effects of the structure of silyl compounds on end-capping are also discussed. © 1994 John Wiley & Sons, Inc.     

Synthesis of poly(β‐pinene)‐g‐poly(meth)acrylate by the combination of living cationic polymerization and atom transfer radical polymerization

New graft copolymers of β‐pinene with methyl methacrylate (MMA) or butyl acrylate (BA) were synthesized by the combination of living cationic polymerization and atom transfer radical polymerization (ATRP). β‐Pinene polymers with predetermined molecular weights and narrow molecular weight distributions (MWDs) were prepared by living cationic polymerization with the 1‐phenylethyl chloride/TiCl₄/Ti(OiPr)₄/nBu₄NCl initiating system, and the resultant polymers were brominated quantitatively by N‐bromosuccinamide in the presence of azobisisobutyronitrile, yielding poly(β‐pinene) macroinitiators with different bromine contents (Br/β‐pinene unit molar ratio = 1.0 and 0.5 for macroinitiators a and b , respectively). The macroinitiators, in conjunction with CuBr and 2,2′‐bipyridine, were used to initiate ATRP of BA or MMA. With macroinitiator a or b , the bulk polymerization of BA induced a linear first‐order kinetic plot and gave graft copolymers with controlled molecular weights and MWDs; this indicated the living nature of these polymerizations. The bulk polymerization of MMA initiated with macroinitiator a was completed instantaneously and induced insoluble gel products. However, the controlled polymerization of MMA was achieved with macroinitiator b in toluene and resulted in the desired graft copolymers with controlled molecular weights and MWDs. The structures of the obtained graft copolymers of β‐pinene with (methyl)methacrylate were confirmed by ¹H NMR spectra. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1237–1242, 2003     

Star-shaped polymers by living cationic polymerization. VII. Amphiphilic graft polymers of vinyl ethers with hydroxyl groups: Synthesis and host–guest interaction

Amphiphilic graft polymers of vinyl ethers (VEs) ( 6 ) where each branch consists of a hydrophilic polyalcohol and a hydrophobic poly(alkyl vinyl ether) segment were prepared on the basis of living cationic polymerization, and their properties and functions were compared with the corresponding amphiphilic star-shaped polymers. In toluene at ?15°C, the HI/ZnI₂-initiated living block polymer 2 of an ester-containing VE (CH₂? CHOCH₂CH₂OCOCH₃) and isobutyl VE (IBVE) was terminated with the diethyl 2-(vinyloxy)ethylmalonate anion [ 3 ; ^ΦC(COOEt)₂CH₂CH₂OCH ? CH₂] ( 2/3 = 1/2 mole ratio) to give a macromonomer ( 4 ), H[CH₂CH(OCH₂CH₂OCOCH₃)] _m-[CH₂CH(OiBu)]_n? C(COOEt)₂CH₂CH₂OCH ? CH₂ (m = 5, n = 15; M?_n = 2600, M?_w/M?_n = 1.13, 1.10 vinyl groups/chain). Subsequently, 4 was homopolymerized with HI/ZnI₂ in toluene at ?15°C. In 3 h, 85% of 4 was consumed and a graft polymer ( 5 ) was obtained [M?_w = 15000, DP_n (for 4 ) = 6]. The apparent M?_w (10,900) of 5 by size-exclusion chromatography (SEC) is smaller than that by light scattering as well as that (18,300) by SEC of the corresponding linear polymer with the almost same molecular weight, indicating the formation of a multi-branched structure. Hydrolysis of the pendant esters in 5 gave the amphiphilic graft polymer 6 where each branch consists of a hydrophilic polyalcohol and a hydrophobic poly(IBVE) segment. The graft polymer 6 was found to interact specifically with small organic molecules (guests) with polar functional groups, and 6 differed in solubility and host-guest interaction from the corresponding star-shaped polymer. © 1993 John Wiley & Sons, Inc.     

Synthesis of end‐functionalized polymers and copolymers of cyclopentadiene with vinyl ethers by cationic polymerization

A series of cyclopentadiene (CPD)‐based polymers and copolymers were synthesized by a controlled cationic polymerization of CPD. End‐functionalized poly(CPD) was synthesized with the HCl adducts [initiator = CH₃CH(OCH₂CH₂X)Cl; X = Cl ( 2a ), acetate ( 2b ), or methacrylate] of vinyl ethers carrying pendant functional substituents X in conjunction with SnCl₄ (Lewis acid as a catalyst) and n‐Bu₄NCl (as an additive) in dichloromethane at −78 °C. The system led to the controlled cationic polymerizations of CPD to give controlled α‐end‐functionalized poly(CPD)s with almost quantitative attachment of the functional groups (F_n ∼ 1). With the 2a or 2b /SnCl₄/n‐Bu₄NCl initiating systems, diblock copolymers of 2‐chloroethyl vinyl ether (CEVE) and 2‐acetoxyethyl vinyl ether with CPD were also synthesized by the sequential polymerization of CPD and these vinyl ethers. An ABA‐type triblock copolymer of CPD (A) and CEVE (B) was also prepared with a bifunctional initiator. The copolymerization of CPD and CEVE with 2a /SnCl₄/n‐Bu₄NCl afforded random copolymers with controlled molecular weights and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight = 1.3–1.4). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 398–407, 2001     

Multifunctional coupling agents for living cationic polymerization. IV. Synthesis of end-functionalized multiarmed poly(vinyl ethers) with multifunctional silyl enol ethers

Telechelic ( 8 ) and end-functionalized four-arm star polymers ( 9 ) were synthesized through the coupling reactions of end-functionalized living poly(isobutyl vinyl ether) ( 5; DP _n ～ 10) with the bi-and tetrafunctional silyl enol ethers, H_4-nC? [CH₂OC₆H₄C(OSiMe₃) = CH₂]_n ( 3: n = 2; 4: n = 4). The precursor polymers 5 were prepared by living cationic polymerization with functionalized initiators, CH₃CH(Cl)OCH₂CH₂X(6), in conjunction with zinc chloride in methylene chloride at ?15°C. The initiators 6 were obtained by the addition of hydrogen chloride gas to vinyl ethers bearing pendant functional groups X , including acetoxy [? OC(O)CH₃], styryl (? OCH₂C₆H₄-p-CH = CH₂), and methacryloyl [? OC(O)C(CH₃) = CH₂]. The coupling reactions with 3 and 4 in methylene chloride at ?15°C for 24 h afforded the end-functionalized multiarmed polymers ( 8 and 9 ) in high yield (>91%), where those with styryl or methacryloyl groups are new multifunctional macromonomers. © 1994 John Wiley & Sons, Inc.     

Synthesis of polymers by template polymerization. I. Template polymerization of poly(methacrylic acid) with β‐cyclodextrin

A novel template monomer with multiple methacryloyl groups was synthesized with β‐cyclodextrin by the acetylation of primary hydroxyl groups and the esterification of secondary hydroxyl groups with methacrylic acid anhydride. The average number of methacryloyl groups in the monomer was 11. The radical polymerization of the monomer was carried out with the following initiators: α,α′‐azobisisobutylonitrile, H₂O₂? Fe²⁺ redox initiator, p‐xylyl‐N,N‐dimethyldithiocarbamate (XDC), and α‐bromo‐p‐xylyl‐N,N‐dimethyldithiocarbamate (BXDC). When the concentration of the monomer was less than 4.12 × 10^?3 M, polymerization was limited inside the molecule, and gelation of the system was hindered. For controlled radical photopolymerization with XDC and BXDC, the methacryloyl groups of the monomer were homogeneously polymerized, and poly(methacrylic acid) with a narrow molecular weight distribution was obtained by the hydrolysis of the polymerized products. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3539–3546, 2001     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Synthesis and properties of α-substituted benzylpyridinium salts as cationic initiators

α-Methylbenzylpyridinium SbF₆ (1a) and α,α-dimethylbenzylpyridinium SbF₆ (1b) were prepared and the effect of α-methyl groups on the active species and the activity of 1a, 1b during the cationic polymerization of glycidyl phenyl ether (GPE) was evaluated. 1b was prepared by the reaction of α,α-dimethylbenzyl alcohol with pyridinium hexafluoroantimonate (2) in several solvents, and the yield depended on the dipole moment of the solvents, although it was poor for the reaction of α,α-dimethylbenzyl chloride with pyridine for the steric hindrance of the α-methyl groups followed by exchange with NaSbF₆. Both 1a and 1b acted as a latent thermal initiator during the cationic polymerization of GPE and 1b showed higher activity during cationic polymerization with the higher steric effect of the α-methyl groups than 1a. The ¹H-NMR analysis of the obtained poly GPE indicated that the active species of 1b changed from the benzyl cation to H⁺, depending on the reaction temperature, although 1a released benzyl cations as active species in the cationic polymerization of GPE. © 1996 John Wiley & Sons, Inc.     

γ-poly(glutamic acid) as an initiator of cationic polymerization of N-vinylcarbazole and N-vinyl-2-pyrrolidone

The cationic polymerization of vinyl monomers initiated by biosynthesized γ-poly(glutamic acid) (γ-PGA) powder surface was carried out in a heterogeneous system. It was found that the polymerization of N-vinylcarbazole (NVC) and N-vinyl-2-pyrrolidone (NVPD) is initiated by γ-PGA powder. The grafting of polymers onto γ-PGA surface was scarcely observed. The apparent activation energy of the polymerization of NVC and NVPD was estimated to be 20.2 and 24.8 kJ/mol, respectively. The polymerization was totally inhibited by the addition of triethylamine and pyridine, but not hydroquinone. The polymerization rate in nitrobenzene was larger than that in toluene. These results indicated the cationic nature of the polymerization. γ-PGA treated with KOH did not show the initiating activity of the polymerization. Therefore, carboxyl groups on γ-PGA powder surface play an important role in the initiation of the polymerization. It may be suggested that the polymerization is initiated by proton addition to monomer from carboxyl groups on γ-PGA powder surface and the propagation proceeds with carboxylate anion on the surface as counter ion. © 1993 John Wiley & Sons, Inc.     

Synthesis of block and graft copolymers of β-pinene and styrene by transformation of living cationic polymerization to atom transfer radical polymerization

The transformations of living cationic polymerization to ATRP to form the block and graft copolymers of β-pinene with styrene were performed. Poly(β-pinene) carrying benzyl chloride terminal [poly(β-p)StCl] was prepared by capping the living poly(β-pinene), which was obtained with 1-phenylethyl chloride/TiCl₄/Ti(OiPr)₄/nBu₄NCl initiating system, with a few units of styrene. Poly(β-p)StCl, in conjunction with CuCl and bpy, could initiate the ATRP of styrene and gave well-defined block copolymer of β-pinene and styrene. In contrast, tert-alkyl-chlorine-capped poly(β-pinene) [poly(β-p)Cl] obtained by living cationic polymerization of β-pinene per se without capping of styrene gave a mixture of desired block copolymers and unreacted poly(β-p)Cl due to the low initiating reactivity of poly(β-p)Cl. Brominated poly(β-pinene) synthesized by the quantitative bromination of poly(β-pinene) using NBS was also used to initiate the ATRP of styrene in the presence of CuBr and bpy to prepare the graft copolymer of β-pinene and styrene. The first-order kinetic characteristic and linear increment of molecule weight with the increasing of monomer conversion indicated the living nature of this ATRP grafting.     

Monoaryloxo ytterbium(III) chlorides supported by β‐diketiminato ligands as novel initiators for the living ring‐opening polymerization of ε‐caprolactone

Ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out using β‐diketiminato‐supported monoaryloxo ytterbium chlorides L¹Yb(OAr)Cl(THF) (1) [L¹ = N,N′‐bis(2,6‐dimethylphenyl)‐2,4‐pentanediiminato, OAr = 2,6‐di‐tert‐butylphenoxo‐], and L²Yb(OAr′)Cl(THF) (2) [L² = N,N′‐bis(2,6‐diisopropylphenyl)‐2,4‐pentanediiminato, OAr′ = 2,6‐di‐tert‐butyl‐4‐methylphenoxo‐], respectively, as single‐component initiator. The influence of reaction conditions, such as polymerization temperature, polymerization time, initiator, and initiator concentration, on the monomer conversion, molecular weight, and molecular weight distribution of the resulting polymers was investigated. Complex 1 was well characterized and its crystal structure was determined. Some features and kinetic behaviors of the CL polymerization initiated by these two complexes were studied. The polymerization rate is first order with respect to monomer. The M_n of the polymer increases linearly with the increase of the polymer yield, while polydispersity remained narrow and unchanged throughout the polymerization in a broad range of temperatures from 0 to 50 °C. The results indicated that the present system has a “living character”. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1147–1152, 2006     

α‐keto‐β‐diimine nickel‐catalyzed olefin polymerization: Effect of ortho‐aryl substituents and preparation of stereoblock copolymers

A series of α‐keto‐β‐diimine nickel complexes (Ar‐N = C(CH₃)‐C(O)‐C(CH₃)=N‐Ar)NiBr₂; Ar = 2,6‐R‐C₆H₃‐, R = Me, Et, iPr, and Ar = 2,4,6‐Me₃‐C₆H₃‐) was prepared. All corresponding ligands are unstable even under an inert atmosphere and in a freezer. Stable copper complex intermediates of ligand synthesis and ethyl substituted nickel complex were isolated and characterized by X‐ray. All nickel complexes were used for the polymerization of ethene, propylene, and hex‐1‐ene to investigate their livingness and the extent of chain‐walking. Low‐temperature propene polymerization with less bulky ortho‐substituents was less isospecific than the one with isopropyl derivative. Propene stereoblock copolymers were prepared by iPr derivative combining the polymerization at low temperature to prepare isotactic polypropylene (PP) block and at a higher temperature, supporting chain‐walking, to obtain amorphous regioirregular PP block. Alternatively, a copolymerization of propene with ethene was used for the preparation of amorphous block. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2440–2449     

Proton transfer‐controlled anionic polymerization of methyl‐substituted β‐lactams with potassium t‐butoxide and subsequent coupling reaction with saccharides

The potassium t‐butoxide‐catalyzed ring‐opening polymerization of 3,3‐dimethyl‐ and 4,4‐dimethyl‐2‐azetidinone proceeds quantitatively in a mixture of N,N‐dimethylacetamide and 5–10 wt % of lithium chloride at 25°C to give the corresponding monodisperse polyamides. The addition of methyl α‐D ‐glucoside into the living polyamide system gives a novel polyamide linked with the glucose moiety at one chain end. A new graft copolymer composed of a water soluble polysaccharide (dextran) backbone and many monodisperse polyamide branches was also prepared by a similar coupling method. The difference in acidity among the lactam monomers, the corresponding polyamides, and the alcohols was essential for the attainment of such a proton transfer‐controlled system composed of the living polymerization and the subsequent coupling reaction. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 909–915, 1999     

Living cationic polymerization of α‐methyl vinyl ethers using SnCl4

Cationic polymerization of α‐methyl vinyl ethers was examined using an IBEA‐Et_1.5AlCl_1.5/SnCl₄ initiating system in toluene in the presence of ethyl acetate at 0 ～ ?78 °C. 2‐Ethylhexyl 2‐propenyl ether (EHPE) had a higher reactivity, compared to corresponding vinyl ethers. But the resulting polymers had low molecular weights at 0 or ?50 °C. In contrast, the polymerization of EHPE at ?78 °C almost quantitatively proceeded, and the number‐average molecular weight (M_n) of the obtained polymers increased in direct proportion to the EHPE conversion with quite narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ≤ 1.05). In monomer‐addition experiments, the M_n of the polymers shifted higher with low polydispersity as the polymerization proceeded, indicative of living polymerization. In the polymerization of methyl 2‐propenyl ether (MPE), the living‐like propagation also occurred under the reaction conditions similar to those for EHPE, but the elimination of the pendant methoxy groups was observed. The introduction of a more stable terminal group, quenched with sodium diethyl malonate, suppressed this decomposition, and the living polymerization proceeded. The glass transition temperature of the obtained poly(MPE) was 34 °C, which is much higher than that of the corresponding poly(vinyl ether). This poly(MPE) had solubility characteristics that differed from those of poly(vinyl ethers). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2202–2211, 2008     

Electron impact ionisation and UV absorption study of α- and β-pinene

We have performed a coordinated set of experiments to measure the electron impact ionisation and UV photoabsorption cross sections of α- and β-pinene. The adiabatic ionisation energies of α- and β-pinene were derived from experiment and found to be 8.3 and 8.6 eV which compared well with high-level quantum chemical calculations (G3MP2) yielding values of 8.29 and 8.41 eV. Additionally, vertical ionisation energies of 8.62 and 8.96 eV were calculated using an OVGF method. UV photoabsorption cross sections were measured using a high-resolution synchrotron radiation source and electronic states interpreted on the basis of the TD quantum chemical methods.     

Ring-opening metathesis polymerization of new α-norbornenyl poly(ε-caprolactone) macromonomers

Poly(ε-caprolactone) (PCL) macromonomers capped by a polymerizable norbornene end-group have been synthesized and (co)polymerized by ring-opening metathesis with formation of graft copolymers and polymacromonomers. α-Norbornenyl PCL macromonomers have been synthesized by ring opening polymerization (ROP) of ε-caprolactone (εCL) initiated by 2-diethylaluminoxymethyl-5-norbornene. Copolymerization of these PCL macromonomers with norbornene and polymerizable derivatives has been catalyzed by the [RuCl₂(p-cymene)]₂ PCy₃/(trimethylsilyl)diazomethane complex yielding a series of poly(norbornene)-graft-poly(ε-caprolactone) copolymers. These new graft copolymers have been characterized by a set of analytical methods, i.e., SEC, ¹H-NMR, FTIR, DSC, and TGA. Furthermore, PCL macromonomers have been polymerized into high molecular weight comb chains of narrow molecular weight distribution (M_w/M_n = 1.10) within high yields (90%). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2447–2455, 1999     

Synthesis of ferrocene‐containing N‐aryloxo β‐ketoiminate lanthanide complexes and polymerization of ε‐caprolactone

The synthesis, characterization and ε‐caprolactone polymerization behavior of lanthanide amido complexes stabilized by ferrocene‐containing N‐aryloxo functionalized β‐ketoiminate ligand FcCOCH₂C(Me)N(2‐HO‐5‐Bu^t‐C₆H₃) (LH₂, Fc = ferrocenyl) are described. The lanthanide amido complexes [LLnN(SiMe₃)₂(THF)]₂ [Ln = Nd ( 1 ), Sm ( 2 ), Yb ( 3 ), Y ( 4 )] were synthesized in good yields by the amine elimination reactions of LH₂ with Ln[N(SiMe₃)₂]₃(µ‐Cl)Li(THF)₃ in a 1:1 molar ratio in THF. These complexes were characterized by IR spectroscopy and elemental analysis, and ¹H NMR spectroscopy was added for the analysis of complex 4 . The definitive molecular structures of complexes 1 and 3 were determined by X‐ray diffraction studies. Complexes 1 – 4 can initiate the ring‐opening polymerization of ε‐caprolactone with moderate activity. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of functional polyethylene graft copolymers by nitroxide‐mediated living radical polymerization

This paper describes a new method to prepare graft copolymers, such as polyethylene‐g‐polystyrene (PE‐g‐PS), with a relatively well‐controlled reaction mechanism. The chemistry involves a transformation process from the metallocene copolymerization of ethylene and m,p‐methylstyrene (m,p‐MS) to nitroxide‐mediated “living” free radical polymerization (LRFP) of styrene. The metallocene catalysis produces ethylene‐co‐m,p‐methylstyrene (EMS) random copolymers. Next, 1‐hydroxyl‐2,2,6,6‐tetramethylpiperidine (HO‐TEMPO) was synthesized by the reduction of TEMPO with sodium ascorbate. The macroinitiator (EMS‐TEMPO) was synthesized with the bromination reaction of EMS, and the following nucleofilic reaction with this functional nitroxyl compound. The resulting macroinitiator (EMS‐TEMPO) for LRFP was then heated in the presence of styrene to form graft copolymer. DSC, ¹H‐NMR, FTIR spectroscopy were employed to investigate the structure of the polymers. The results of Molau test showed that PE‐g‐PS could be a potential good compatilizer. Copyright © 2008 John Wiley & Sons, Ltd.     

Efficient catalysts for ring‐opening polymerization of ε‐caprolactone and β‐butyrolactone: Synthesis and characterization of zinc complexes based on benzotriazole phenoxide ligands

A series of efficient zinc catalysts supported by sterically bulky benzotriazole phenoxide ( BTP ) ligands are synthesized and structurally characterized. The reactions of diethyl zinc (ZnEt₂) with ^CMe2PhBTP ‐H, ^t‐BuBTP ‐H, and ^TMClBTP ‐H yield monoadduct [(μ‐ BTP )ZnEt]₂ ( 1 – 3 ), respectively. Bisadduct complex [( ^t‐BuBTP )₂Zn] ( 4 ) results from treatment of ZnEt₂ with ^t‐BuBTP ‐H (2 equiv.) in toluene, but treatment of ^TMClBTP ‐H with ZnEt₂ in the same stoichiometric proportion in Et₂O produces five‐coordinated monomeric complex [( ^TMClBTP )₂Zn(Et₂O)] ( 5 ). The molecular structures of compounds 1 , 4 , and 5 are characterized by X‐ray crystal structure determinations. All complexes 1 – 5 are efficient catalysts for the ring‐opening polymerization of ε‐caprolactone (ε‐CL) in the presence of 9‐anthracenemethanol. Experimental results indicate that complex 3 exhibits the greatest activity with well‐controlled character among these complexes. The polymerizations of ε‐CL and β‐butyrolactone catalyzed by 3 are demonstrated in a “living” character with narrow polydispersity indices (monomer‐to‐initiator ratio in the range of 25–200, PDIs ≤ 1.10). The “immortal” character of 3 provides a way to synthesize as much as 16‐fold polymer chains of poly(ε‐CL) (PCL) with narrow PDI in the presence of a catalyst in a small proportion. The controlled fashion of complex 3 also enabled preparation of the PCL‐b‐poly(3‐hydroxybutyrate) copolymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011