Polymer light emitting diodes

Monolayer light emitting diodes from poly(1,4-phenylenevinylene) (PPV) usually exhibit relatively low quantum efficiencies. So the external efficiency of an ITO/PPV/Ca LED is typically 0.01%. In order to increase the quantum yield in bilayer devices, oxadiazole polymers have been used. The syntheses of a number of novel polymethacrylates with pendant oxadiazole groups and some aromatic polyethers with oxadiazole units in the main chain are described. These polymers with the electron withdrawing oxadiazole units facilitate electron injection and transport in bilayer LEDs with PPV as hole transport layer. Thus an LED with a top layer of the polyether 3a exhibits a tenfold increase of the external quantum efficiency to 0.1%. Compared to conventional PPV LEDs, the improved bilayer devices show intense emission at low current densities.     

Synthesis and electroluminescent studies of blue‐emitting copolymers containing phenylene vinylene and oxadiazole moieties in the main chain

Two statistical copolymers III and IV combining features of the two reference polymers I and II were synthesized by a Wittig reaction with the objective of raising the electron‐transport properties and fluorescence quantum yields relative to the alternating block copolymers I and II . The electroluminescent properties of single‐layer LEDs using these copolymers were studied. External quantum efficiencies of 0.035 and 0.11% were obtained from single‐layer devices on the basis of III and IV , respectively, which are higher than those of similar devices using I and II . Two single‐layer LEDs using a blend of I and II (4:1 and 1:1 wt/wt) corresponding to the compositions of copolymers III and IV , respectively, were also fabricated for comparison. Results indicated that the covalent incorporation of oxadiazole is effective in improving the efficiency of LEDs and that the molar content of oxadiazole plays an important role in the performance of the devices. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 235–241, 2002     

主链含电子传输型团的可溶性PPV聚合物载流子传输特性研究

合成了一种聚苯撑乙烯撑(PPV)主链上含有电子传输基团的新型结构电子聚合物(O-PPV).该低聚物的M_w=1000,T_g=197℃,可溶于氯仿和四氢呋喃.单层O-PPV器件的发光效率约为单层PPV器件的5～8倍.进一步构造了结构为空穴传输特性材料/O-PPV和O-PPV/电子传输特性材料的双层器件来研究O-PPV的载流子传输特性,实验结果表明,O-PPV是一种具有明显两性载流子传输的特性材料.     

New poly(p‐phenylene vinylene) derivatives with two oxadiazole rings per repeat unit: Synthesis,photophysical properties,electroluminescence, and metal ion recognition

Two new poly(p‐phenylene vinylene) derivatives OX1‐PPV and OX2‐PPV bearing two 1,3,4‐oxadiazole rings per repeat unit and a fully conjugated backbone with solubilizing dodecyloxy side groups were synthesized and investigated. The amorphous conjugated polymers had glass‐transition temperature values of 60–75 °C and emitted intense blue or greenish‐blue light in solution with photoluminescence (PL) emission maxima at 379–492 nm and PL quantum yields of 0.41–0.52. In the solid state they emitted yellowish‐green light with PL emission maxima at 533–555 nm. Cyclic voltammetry showed that both conjugated polymers had reversible reduction and irreversible oxidation, making them n‐type materials. The electron affinity of OX2‐PPV was estimated as 2.85 eV whereas that of OX1‐PPV was 2.75 eV. Yellow electroluminescence (EL) was achieved from single‐layer light‐emitting diodes of OX2‐PPV with an EL emission maximum at 555 nm and a brightness of 70 cd/m². Polymer OX2‐PPV, which was functionalized with 2,6‐bis(1,3,4‐oxadiazole‐2‐yl)pyridine, demonstrated sensitivity to various metal ions as a fluorescence‐mode chemosensor. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2112–2123, 2004     

Influence of crosslinking on charge carrier mobility in crosslinkable polyfluorene derivatives

Carrier mobility is a key parameter for the application of conjugated polymers. In this work, a series of polyfluorenes (PF2/6) with different fractions of crosslinkable acrylate groups is investigated. Mobility measurements are carried out to assess the influence of crosslinking with different photoinitiators on the performance of the material. For the regime of low to medium charge carrier density, relevant for OLEDs and OPVs, we used a novel technique based on the injection of charge carriers from the electrodes of an optoelectronic device: MIS‐CELIV (MIS: metal‐insulator‐semiconductor). For large charge carrier densities we performed OFET measurements. We find that using optimized conditions crosslinking does not influence the hole mobility in the investigated system. Furthermore, we demonstrate that the crosslinking process may be triggered solely by thermal activation and UV‐illumination without the need of any initiator. Thus, densely crosslinked networks are obtained without the formation of undesired decomposition products from added photoinitiator. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 112–120     

Synthesis,characterization, and electroluminescence of PPV copolymers containing electron and hole‐transporting units

Three series of poly(phenylene vinylene) (PPV) derivatives containing hole‐transporting triphenylamine derivatives [N‐(4‐octoxylphenyl)diphenylamine, N,N′‐di(4‐octyloxylphenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine, and N,N′‐di(4‐octoxylphenyl)‐N,N′‐diphenylbenzidine] (donor) and electron‐transporting oxadiazole unit (2,5‐diphenyl‐1,3,4‐oxadiazole) (acceptor) in the main chain were synthesized by improved Wittig copolymerization. The resulting donor–acceptor (D‐A) polymers are readily soluble in common organic solvents, such as chloroform, dichloroethane, THF, and toluene. The polymers containing oxadiazole group exhibit good thermal stability with 5% weight loss above 400 °C. The intramolecular charge‐transfer was observed in these D‐A polymers. In comparison with corresponding polymers without oxadiazole unit, the single‐layer devices based on the D‐A polymers showed much improved electroluminescent properties, because of the balanced charge injection and transport. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1566–1576, 2008     

Synthesis and electro‐optical properties of light‐emitting polymers containing oxadiazole derivatives for light‐emitting diodes applications

Two PPV‐based bipolar polymers containing 1,3,4‐oxadiazole pendant groups were synthesized via the Gilch polymerization reaction for use in light‐emitting diodes (LEDs). The resulting polymers were characterized using ¹H and ¹³C NMR, elemental analysis, DSC, and TGA. These polymers were found to be soluble in common organic solvents and are easily spin‐coated onto glass substrates, producing high optical quality thin films without defects. The electro‐optical properties of ITO/PEDOT/polymer/Al devices based on these polymers were investigated using UV‐visible, PL, and EL spectroscopy. The turn‐on voltages of the OC₁Oxa‐PPV and OC₁₀Oxa‐PPV devices were found to be 8.0 V. The maximum brightness and luminescence efficiency of the OC₁Oxa‐PPV device were found to be 544 cd/m² at 19 V and 0.15 cd/A, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1098–1110, 2008     

Synthesis and optical properties of a poly(p‐phenylenevinylene) derivative and polyfluorenes with bipolar groups along the main chain

A poly(p‐phenylenevinylene) derivative (PPV–TPA)] and a series of statistical copolyfluorenes (PF–TPA)] containing oxadiazole and triphenylamine segments along the main chain were synthesized by the Heck reaction and nickel‐mediated coupling, respectively. The PF–TPA copolyfluorenes with relatively low contents of oxadiazole and triphenylamine units were readily soluble in common organic solvents, whereas the other copolyfluorenes displayed lower solubility. PPV–TPA showed excellent solubility in solvents such as tetrahydrofuran (THF), dichloromethane, chloroform, and toluene. Thin films of the polymers absorbed light in the range of 375–396 nm and had optical band gaps of 2.76–2.98 eV. They emitted blue‐green light with a maximum at 414–522 nm. The fluorescence quantum yields in THF solutions were 0.08–0.53. The copolyfluorene PF–TPA thin films with high contents of oxadiazole and triphenylamine moieties emitted pure blue light that remained stable even after annealing at 150 °C for 4 h in air. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3556–3566, 2006     

Electroluminescent block copolymers containing oxadiazole and thiophene via ATRP

Block copolymers containing thiophene units in one block and oxadiazole (OXD) units in the other were prepared. Atom transfer radical polymerization method was used to obtain the thiophene‐containing mesogen‐jacketed polymers, and the kinetic study indicated that the polymerization was controllable and the polymers could be used to initiate the polymerization of the OXD‐containing monomers. Photoluminescent spectra indicated that the fluorescence quantum yields of the polymers increased with increasing content of OXD. And, more OXD domains, that is, more interfaces between the hole‐transport parts and electron‐transport parts, resulting in the higher probability of exciplex formation. The electroluminescent devices containing the block copolymer with 64 mol % OXD as the emissive layer had a maximum brightness of 127 cd/m² and an extremely low onset voltage of 7.7 V, which indicated that the injection and transport of charge carriers were facilitated and the number of charge carriers was sufficiently high in early time after the voltage was turned on. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Single layer light‐emitting diodes from copolymers comprised of mesogen‐jacketed polymer containing oxadiazole units and PVK

A series of copolymers PCt‐co‐Poly(N‐vinylcarbazole) were synthesized through common radical polymerization, in which P‐Ct as a kind of mesogen‐jacketed liquid crystalline polymer was introduced, and the effects of copolymers composing variation on the optical properties of the polymers were studied. The structures and properties of the copolymers were characterized and evaluated by thermogravimetric (TGA), UV, photoluminescence (PL), cyclic voltammetry (CV), and electroluminescence (EL) analyses. All the polymers enjoy high thermal stability. PL peaks in the film show blue‐shift compared with in solutions and fluorescent quantum efficiency decreased with the N‐vinylcarbazole (nvk) content increasing, which supported the efficient energy transfer from nvk units to the oxadiazole units. CV revealed that, with the incorporation of nvk to the copolymer, these copolymers had high‐lying HOMO energy levels ranging from ?5.94 to ?6.09 eV. Single‐layer light‐emitting diodes (LEDs) with the configuration of ITO/PEDOT/PCt‐nvk/Mg:Ag/Ag were fabricated, which emit a blue light around 450 and 490 nm with a maximum luminance of 703 cd/m². The device performance varies with the content of nvk and device configuration, with device configuration ( b ) and PCt‐nvk8 giving the best value of external quantum efficiency of 0.27%. We show here that by proper design copolymer structure and modification of device configuration can exhibit strong blue EL in higher external quantum efficiency. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1843–1851, 2008     

Electroluminescence and charge photogeneration in poly(9,9-dihexadecylfluorene-2,7-diyl) and its blends

Photoluminescence, electroluminescence (EL), charge photogeneration and transport were studied in poly(9,9-dihexadecylfluorene-2,7-diyl) (PFC16), poly[(2,5-dihexadecyl-1,4-phenylene)(1,4-phenylene)] (PPPC16) and their blends. Blending of PFC16 with PPPC16 led to a significant improvement of the EL efficiency and stability compared with the devices fabricated from the neat polymers. Efficient blue and white light-emitting devices (LEDs) were fabricated using the blends. The increase in the EL efficiency was attributed to modification of the charge injection, transport and recombination properties in the blend.     

Multiple-quantum-well perovskite for hole-transport-layer-free light-emitting diodes

We demonstrate hole-transport-layer-free light-emitting diodes(LEDs) based on solution-processed multiple-quantum-well(MQW) perovskite. The MQW perovskite can self-assemble to a unique structure of vertically graded distribution with two-dimensional layered perovskite covered by three-dimensionallike perovskite at top, which can naturally form a barrier of electron transporting to the anode interface,thereby enhancing the charge capture efficiency. This leads to hole-transport-layer-free MQW per...     

Electroluminescence from a conjugated polymer grafted with CdSe/ZnS: High brightness and improved efficiency

A new series of sulfide‐substituted poly(1,4‐phenylene vinylene) derivatives ( S1PPV–S3PPV ) with different composition ratios were successfully synthesized via the Gilch route. The CdSe/ZnS were grafted to the sulfur atoms by ligand exchange reaction. The grafted CdSe/ZnS contents were determined from TGA analysis to be from 4.6 to 37.8%. A new peak at 1151 cm^?1 formed in FT‐IR after ligand exchange, which is attributed to the force formation between sulfur and CdSe. The GPC results show that the molecular weights of final polymers became higher after ligand exchange. Thin films of obtained polymers emitted bright green and yellow light with the max emission peak located from 546 to 556 nm. Double‐layer LEDs with an ITO/PEDOT/polymer/Ca/Al configuration were fabricated to evaluate the potential use of these polymers. The turn‐on voltages of the devices were about 4–5 V. As the CdSe/ZnS content increased in grafted polymers, the device performance was significantly enhanced as compared to pristine polymers. In the case of S3PPV , the double‐layer device showed a maximum luminance of 6073 cd/m² with a current yield of 0.82 cd/A. The maximum luminance and current yield was enhanced to 13,390 cd/m² and 2.25 cd/A by grafting CdSe/ZnS onto polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5378–5390, 2006     

Toward highly photoluminescent and bipolar charge‐transporting conjugated polymers

DBPP (2,5‐di‐(2‐biphenyl)‐1,4‐phenylene) units were embedded into a PPV (poly(p‐phenylenevinylene)) backbone, resulting in a dramatic improvement in the solid‐state photoluminescence quantum efficiency of the polymer. Oxadiazole units were introduced as PPV main‐chain substitutents, imparting the resulting polymer with bipolar charge‐transporting properties. A carefully‐designed conjugated polymer combining both DBPP and oxadiazole units showed both high PL efficiency and bipolar charge transport ability, making it a promising candidate for the fabrication of efficient single‐layer LED devices.     

Synthesis and characterization of bipolar copolymers containing oxadiazole and carbazole pendant groups and their application to electroluminescent devices

A series of random copolymers POC10{Poly(2,5‐bis[(5‐decyloxy‐phenyl)‐1,3,4‐oxadiazole]styrene)}‐co‐Poly(N‐vinylcarbazole) (PVK) with different nvk content were synthesized through common radical polymerization and were incorporated into light emitting diodes as emitting layers. The structures and properties of the copolymers were characterized and evaluated by GPC, TGA, DSC, UV, PL, CV, and EL analyses. All the polymers enjoy high thermal stability. Cyclic voltammetry revealed that, with the incorporation of N‐vinylcarbazole to the copolymer, these copolymers had high‐lying HOMO energy values, which facilitated hole injection. PL peaks in the film show blue‐shift compared with those in solutions and fluorescent quantum efficiency decreased with the nvk content increasing, which supported the efficient energy transfer from nvk units to the oxadiazole units. Single‐layer LEDs with the configuration of ITO/PEDOT/PC10‐nvk/Mg:Ag/Ag were fabricated, which emit a blue light around 440 and 490 nm with a maximum brightness of 675.3 cd/m² and luminous efficiency of 0.108 cd/A. Moreover, we fabricated electrophosphorescent device from bipolar transport copolymer PC10‐nvk4 as host material and an orange‐light‐emitting iridium phosphor IrMDPP as guest. The maximum luminous efficiency of 0.548 cd/A was obtained. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5452–5460, 2008     

Novel mesogen‐jacketed poly(p‐phenylenevinylene) derivatives bearing oxadiazole pendants: Design,synthesis, and optoelectronic properties

1,3,4‐oxadiazole moieties were laterally linked to the phenyl rings via a short ? OCH₂ spacer and a series of novel poly(p‐phenylenevinylene) derivatives have been successfully synthesized through Horner–Witting–Emmons coupling reaction. The structures and properties of the monomers and the resulting conjugated polymers were characterized by nuclear magnetic resonance spectroscope, Fourier transform infrared, elemental analysis, gel permeation chromatography, thermogravimetric analysis, UV–vis absorption (UV) spectroscopy, photoluminescence spectroscopy and cyclic voltammetry. The UV spectra at solution state was similar to what's observed at film state while the PL spectra at film state had a red shift from 19 to 28 nm compared with the results at solution state, which implied that the unique bulky jacketed structure containing oxadiazole unit of these copolymers could effectively suppress π‐stacking/aggregation. LUMO levels of these polymers varied from ?3.44 to ?3.63 eV with increasing content of oxadiazole units, which facilitated electron injection. PLEDs with the configuration of ITO/PEDOT/Polymer/TPBI (15 nm)/LiF (1 nm)/Al (100 nm) were fabricated, which emit a yellowish green light around 540 and 570 nm with a maximum brightness of 1074.7 cd/m² and luminous efficiency of 0.108 cd/A. The introduction of the unique bulky OXD unit into PPVs at a low molar content largely improved the electroluminescence properties of PPV. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7173–7186, 2008     

Interface formation of metals and poly(p-phenylene vinylene): surface species and band bending

We used X-ray photoemission spectroscopy (XPS) to investigate the surface species of poly(p-phenylene vinylene) (PPV) and its interface formation with Ca and Al. PPV surfaces compositions varied with sample preparation. For relatively "clean'' surfaces with 4–5% O, analysis of the O 1s peak revealed four types of oxygen species, namely carbonyl (C=O), hydroxyl (C–OH), ether (C–O–C) and the carboxylic groups (HO–C=O). The oxygen groups, excluding ether, reacted with Al or Ca to form the corresponding metal oxides. Chemical interactions between the metals and the phenylene and vinylene units to yield new species were not detected. For sulfur-free surfaces, a C 1s peak shift of +0.5 eV followed the deposition of 15–30 Å of Ca on PPV. For sulfur-containing surfaces, the C 1s peak shift was −0.5 eV. We attribute this difference to the interaction of metal atoms with the sulfur impurities. For Al/PPV, a C 1s peak shift occurred at <2 Å of Al deposition and reached a constant value of about +0.4 eV after ⪅8 Å of Al. Again, the direction of the peak shift depended on the presence of sulfur impurities. We attribute the C 1s peak shifts to surface band bending and to Schottky barrier formation. Since surface oxidation of PPV can inhibit band-bending, our overall results suggest that the barrier height at the metal/PPV interface is highly sensitive to the surface preparation and relatively insensitive to the work function of the metals. The shift seen by XPS in the C 1s core level spectra of PPV points clearly to charge transfer and Schottky barrier formation at the interface as a result of metal deposition. These results imply that the metal/polymer interface is not rigid and that triangular barrier tunneling fails to take into account the effect of barrier formation. We propose a band-bending modified tunneling (BBMT) model to explain charge transfer at the Ca/polymer interface. © 1997 John Wiley & Sons, Ltd.     

量子点发光二极管中电荷累积行为

量子点发光二极管(QLED)是不需要额外光源的主动发光技术,在显示领域中的应用前景被广泛看好。寿命较短是影响QLED商业化的重要因素之一,并且其老化机理尚不清晰。在本工作中,我们通过自主搭建电荷提取装置,证实红光QLED在恒流驱动过程中,存在显著的电荷累积。累积电荷量随着驱动电流密度增加而增加,但当超过阈值电流密度(对应于开启电压)后逐渐趋于饱和。随着器件老化,亮度下降伴随着累积电荷量进一步增加。本工作对QLED老化过程中电荷累积规律的理解,能为QLED材料和界面的优化设计提供直观判据。     

Synthesis and optical and electrochemical properties of novel polyethers containing isolated distyrylbenzene derivatives and side‐aromatic 1,3,4‐oxadiazole chromophores

New polyethers ( P2 , P4 ) with isolated emitting distyrylbenzene derivatives and pendant aromatic 1,3,4‐oxadiazole chromophores have been prepared by the Horner–Wadsworth–Emmons olefination reaction. Polyethers P1 and P3 without oxadiazole groups have also been synthesized for comparison. The reduced viscosities were about 0.20–0.33 dL/g, and the solubility in organic solvents increased with a number of side methoxy or ethoxy substituents in the distyrylbenzene section. Absorption spectra showed two peaks at 371–388 and 304 nm that corresponded to the π‐π* transition of the conjugated distyrylbenzene derivatives and aromatic oxadiazoles, respectively. The band gaps were at 2.76–2.85 eV, which were calculated from onset absorption in the film state. The photoluminescence (PL) maxima were at 459–469 nm, indicating that they are blue‐emitting materials, and the relative PL quantum efficiencies were 0.62–0.77 and 0.23–0.40 in solution and the film state, respectively. Cyclic voltammetric investigations demonstrated that oxadiazole moieties decrease the barrier of electron injection but also retard hole injection. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2571–2580, 2001     

Light-emitting diodes with semiconductor nanocrystals

Colloidal semiconductor nanocrystals are promising luminophores for creating a new generation of electroluminescence devices. Research on semiconductor nanocrystal based light-emitting diodes (LEDs) has made remarkable advances in just one decade: the external quantum efficiency has improved by over two orders of magnitude and highly saturated color emission is now the norm. Although the device efficiencies are still more than an order of magnitude lower than those of the purely organic LEDs there are potential advantages associated with nanocrystal-based devices, such as a spectrally pure emission color, which will certainly merit future research. Further developments of nanocrystal-based LEDs will be improving material stability, understanding and controlling chemical and physical phenomena at the interfaces, and optimizing charge injection and charge transport.