Ligated anionic block copolymerization of methyl methacrylate with n-butyl acrylate and n-nonyl acrylate as promoted by lithium 2-(2-methoxyethoxy) ethoxide/diphenylmethyllithium

Poly(methyl methacrylate-b-n-butyl acrylate) (PMMA-b-Pn-BuA) and poly(methyl methacrylate-b-n-nonyl acrylate) (PMMA-b-Pn-NonA) diblock copolymers have been successfully synthesized by the sequential anionic polymerization of methyl methacrylate (MMA) and the n-alkyl acrylate (n-BuA or n-NonA), in a 90/10 toluene/tetrahydrofuran (THF) mixture at −78°C. When diphenylmethyllithium (DPMLi) ligated with lithium 2-(2-methoxyethoxy) ethoxide (LiOEEM) is used as the initiator, the polymerization of each block appears to be living. Molecular weight and composition of block copolymers can be predicted from the monomer over initator molar ratio and the molecular weight distribution is narrow. Size exclusion chromatography (SEC) supports that no homo-PMMA contaminates the final copolymer. Although the reverse polymerization sequence Pn-NonA-b-PMMA always results in some contamination by homo-Pn-NonA, it has no really significant effect on the final product characteristics. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1543–1548, 1997     

Preparation of water‐soluble,syndiotacticity‐rich,low molecular weight poly(vinyl alcohol) microfibrils in high yields with the low‐temperature polymerization of vinyl pivalate in tetrahydrofuran and saponification

To prepare water‐soluble, syndiotacticity‐rich poly(vinyl alcohol) (PVA) microfibrils for various industrial applications, we synthesized syndiotacticity‐rich, low molecular weight PVA by the solution polymerization of vinyl pivalate (VPi) in tetrahydrofuran (THF) at low temperatures with 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN) as an initiator and successive saponification of poly(vinyl pivalate) (PVPi). Effects of the initiator and monomer concentrations and the polymerization temperature were investigated in terms of the polymerization behaviors and molecular structures of PVPi and the corresponding syndiotacticity‐rich PVA. The polymerization rate of VPi in THF was proportional to the 0.91 power of the ADMVN concentration, indicating the heterogeneous nature of THF polymerization. The low‐temperature solution polymerization of VPi in THF with ADMVN proved to be successful in obtaining water‐soluble PVA with a number‐average degree of polymerization (P_n) of 300–900, a syndiotactic dyad content of 60–63%, and an ultimate conversion of VPi into PVPi of over 75%. Despite the low molecular weight of PVA with P_n = 800, water‐soluble PVA microfibrillar fibers were prepared because of the high level of syndiotacticity. In contrast, for PVA with P_n = 330, shapeless and globular morphologies were observed, indicating that molecular weight has an important role in the in situ fibrillation of syndiotacticity‐rich PVA. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1103–1111, 2002     

Anionic polymerization of methacrylate monomers initiated by lithium dialkylamides

The anionic polymerization of methacrylate monomers has been investigated with lithium dialkylamides as initiators in THF and toluene, respectively. Theoretical arguments and previous studies of mixed aggregates of lithiated organic compounds support the complexity of these systems. Lithium diisopropylamide (LDA) shows the highest initiation efficiency (e.g., f = 75% in THF at −78°C). Interestingly enough, lithium chloride has a remarkable beneficial effect on the methacrylates polymerization in THF at −78°C, due to the formation of 1 : 1 mixed dimer with LDA, which promotes a well-controlled anionic polymerization (M_w/M_n = 1.05) with a high initiation efficiency (94%). The less bulky lithium–diethylamide (LDEA) is much less efficient (f = 26%), essentially as a result of some associated “dormant” species and side reactions on the carbonyl group of MMA. Although various types of ligands have been screened, no remarkable improvement of LDEA efficiency has been observed. Lithium bis(trimethylsilyl)amide (LTMSA) has also been used to increase the steric hindrance of the initiator. This compound is, however, unable to initiate the methacrylates polymerization, more likely because of a too low basicity and a too strong Li—N bond. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3637–3644, 1997     

Synthesis and characterization of block copolymers from 2‐vinylnaphthalene by anionic polymerization

The anionic polymerization of 2‐vinylnaphthalene (2VN) has been studied in tetrahydrofuran (THF) at ?78 °C and in toluene at 40 °C. 2VN polymerization in THF, toluene, or toluene/THF (99:1 v/v) initiated by sec‐butyllithium (sBuLi) indicates living characteristics, affording polymers with predefined molecular weights and narrow molecular weight distributions. Block copolymers of 2VN with methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) have been synthesized successfully by sequential monomer addition in THF at ?78 °C initiated by an adduct of sBuLi–LiCl. The crossover propagation from poly(2‐vinylnaphthyllithium) (P2VN) macroanions to MMA and tBA appears to be living, the molecular weight and composition can be predicted, and the molecular weight distribution of the resulting block copolymer is narrow (weight‐average molecular/number‐average molecular weight < 1.3). Block copolymers with different chain lengths for the P2VN segment can easily be prepared by variations in the monomer ratios. The block copolymerization of 2VN with hexamethylcyclotrisiloxane also results in a block copolymer of P2VN and poly(dimethylsiloxane) (PDMS) contaminated with a significant amount of homo‐PDMS. Poly(2VN‐b‐nBA) (where nBA is n‐butyl acrylate) has also been prepared by the transesterification reaction of the poly(2VN‐b‐tBA) block copolymer. Size exclusion chromatography, Fourier transform infrared, and ¹H NMR measurements indicate that the resulting polymers have the required architecture. The corresponding amphiphilic block copolymer of poly(2VN‐b‐AA) (where AA is acrylic acid) has been synthesized by acidic hydrolysis of the ester group of tert‐butyl from the poly(2VN‐b‐tBA) copolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4387–4397, 2002     

Anionic iron(II) alkoxides as initiators for the controlled ring‐opening polymerization of lactide

Hetero‐bimetallic Fe(II) alkoxide/aryloxides were evaluated as initiators for the ring‐opening polymerization of rac‐lactide. [(THF)NaFe(O^tBu)₃]₂ ( 1 ) and [(THF)₄Na₂Fe(2,6‐diisopropylphenolate)₄] ( 2 ) (THF = tetrahydrofuran) both polymerized lactide efficiently at room temperature, with complex 1 affording better control over the molecular weight parameters of the resultant polymer. At conversions below 70%, a linear increase in molecular weight with conversion was observed, indicative of a well‐controlled polymerization process. Complex 2 is the first example of a dianionic Fe(II) alkoxide and has been structurally characterized to reveal a distorted square planar FeO₄ array in which both Na counterions bridge two aryloxide ligands and are further complexed by two THF ligands. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3798–3803, 2003     

Copolymerization of methyl methacrylate with lauryl methacrylate using group transfer polymerization

The syntheses of random and block copolymers (using sequential monomer addition) of methyl methacrylate (MMA) and lauryl methacrylate (LMA) have been investigated by group transfer polymerization (GTP) over a wide composition range using tetrabutylammonium bibenzoate (TBABB) as catalyst and 1-methoxy-1-(trimethylsiloxy)-2-methyl-1-propene (MTS) as initiator in tetrahydrofuran (THF) at room temperature. The absolute molecular weight of the copolymers were determined by SEC-MALLS. The observed molecular weights were generally higher than the calculated molecular weights. However, the molecular weight distributions were very narrow (1.02–1.1). Use of trimethylsilyl benzoate as a “livingness enhancer” improved the livingness of the first block (PLMA) and block copolymers with no detectable contamination of homopolymer. Statistical copolymers of MMA and LMA were prepared, and the reactivity ratios of the two monomers under the defined conditions were determined. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1999–2007, 1997     

Molecular weight distribution of polyamides obtained in anionic polymerization of methyl-substituted β-lactams and aminolysis of their N-benzoyl lactams

The anionic ring-opening polymerization of 3-methyl-2-azetidinone ( 3 ) in a mixture of N,N-dimethylacetamide with lithium chloride proceeded quantitatively in a homogeneous phase at 25°C, as well as the living anionic polymerization of 3,3-dimethyl-, 4,4-dimethyl-2-azetidinone ( 1 and 2 respectively) in a similar condition. However, the molecular weight dispersion of the polyamide obtained from 3 was found to be higher than that obtained from 1 and 2. The aminolysis reaction of their N-benzoyllactams and N-acyllactams corresponding to their growing species with benzylamine was investigated kinetically, and one of the reasons for broadening of the molecular weight distribution of the polyamide obtained in the anionic polymerization of 3 was speculated to result from a low value of the ratio of the initiation reaction constant to the propagation one. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1831–1838, 1997     

Acceleration of the single electron transfer–degenerative chain transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride in water at 25 °C

The accelerated single electron transfer–degenerative chain transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride (VC) in H₂O/tetrahydrofuran (THF) at 25 °C is reported. This process is catalyzed by sodium dithionite (Na₂S₂O₄)‐sodium bicarbonate (NaHCO₃). Electron transfer cocatalysts (ETC) 1,1′‐dialkyl‐4,4′‐bipyridinum dihalides or alkyl viologens were also employed in this polymerization. The resulting poly(vinyl chloride) (PVC) has a number‐average molecular weight (M_n) = 2,000–12,000, no detectable amounts of structural defects, and both active chloroiodomethyl and inactive chloromethyl chain ends. The molecular weight distribution of PVC obtained is M_w/M_n = 1.5. The surface active agents afford the final polymers as a powder and provide an acceleration of the rate of polymerization. The role of ETC is to accelerate the single electron transfer (SET) step, whereas THF enhances the degenerative chain transfer (DT) step. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6364–6374, 2004     

Living anionic polymerization of lauryl methacrylate and synthesis of block copolymers with methyl methacrylate

Anionic polymerization of lauryl methacrylate (LMA) with 1,1‐diphenylhexyl lithium in tetrahydrofuran (THF) at ?40 °C resulted in a multimodal and broad molecular weight distribution (MWD) with poor initiator efficiency. In the presence of additives such as dilithium salt of triethylene glycol (G₃Li₂), LiCl, and LiClO₄, the polymerization resulted in polymers with a narrow MWD (≤ 1.10). Diblock copolymers of methyl methacrylate (MMA) and LMA were synthesized by anionic polymerization using DPHLi as initiator in THF at ?40 °C with the sequential addition of monomers. The molecular weight distribution of the polymers was narrow and without homopolymer contamination when LMA was added to living PMMA chain ends. Diblock copolymers with broad/bimodal MWD were obtained with a reverse‐sequence monomer addition. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 875–882, 2004     

Monoaryloxo ytterbium(III) chlorides supported by β‐diketiminato ligands as novel initiators for the living ring‐opening polymerization of ε‐caprolactone

Ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out using β‐diketiminato‐supported monoaryloxo ytterbium chlorides L¹Yb(OAr)Cl(THF) (1) [L¹ = N,N′‐bis(2,6‐dimethylphenyl)‐2,4‐pentanediiminato, OAr = 2,6‐di‐tert‐butylphenoxo‐], and L²Yb(OAr′)Cl(THF) (2) [L² = N,N′‐bis(2,6‐diisopropylphenyl)‐2,4‐pentanediiminato, OAr′ = 2,6‐di‐tert‐butyl‐4‐methylphenoxo‐], respectively, as single‐component initiator. The influence of reaction conditions, such as polymerization temperature, polymerization time, initiator, and initiator concentration, on the monomer conversion, molecular weight, and molecular weight distribution of the resulting polymers was investigated. Complex 1 was well characterized and its crystal structure was determined. Some features and kinetic behaviors of the CL polymerization initiated by these two complexes were studied. The polymerization rate is first order with respect to monomer. The M_n of the polymer increases linearly with the increase of the polymer yield, while polydispersity remained narrow and unchanged throughout the polymerization in a broad range of temperatures from 0 to 50 °C. The results indicated that the present system has a “living character”. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1147–1152, 2006     

Poly[glycidyl methacrylate(GMA)/methylmethacrylate(MMA)-b-butadiene(B)-b-GMA/MMA] reactive thermoplastic elastomers: Synthesis and characterization

New block copolymers of the ABA type, where B stands for polybutadiene (PBD) and A for polyglycidylmethacrylate(PGMA), poly(methylmethacrylate(MMA)-co-GMA) and PMMA-b-PGMA, respectively, have been successfully synthesized by using the diadduct of tert-butyllithium (tert-BuLi) to meta-diisopropenylbenzene (m-DIB) as a difunctional initiator. The PBD midblock has been synthesized in a cyclohexane/diethylether (100/6, v/v) mixture at room temperature, whereas the methacrylate outer blocks have been synthesized in a cyclohexane/diethylether/THF (100/6/150, v/v/v) mixture at −78°C. Block copolymers of a very narrow molecular weight distribution (1.10) have been analyzed by differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and tensile testing. These materials are phase separated and can exhibit tensile strength up to 22 MPa together with very high elongation at break (1500%). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3507–3515, 1997     

Synthesis of polyamide-imide by blocked-methylene diisocyanates

The synthesis of polyamide-imide (PAI) can be performed by the reaction of p-chlorophenol-(PCP) blocked 4,4′-diphenyl methane diisocyanates (BMDI) with trimellitic anhydride (TMA) using a two-stage heating. At 80°C the polyimide oligomers were first formed and the high molecular weight PAI can not be available until the temperature was increased to 120°C and stayed for 3 h, during which the amide groups were formed and the molecular weight was increased. The molecular weights of the synthesized PAIs on various conditions were analyzed by measuring the intrinsic viscosity, amide/imide ratio from IR spectra, and average chain length from GPC. The best reaction conditions for obtaining a high molecular weight PAI by the solution polymerization are: (a) using N-methyl pyrollidone (NMP) as solvent, (b) adding more BMDI/TMA ratio, and (c) adding tert-n-butyl amine as the catalyst for the dissociation of blocked MDI and controlling the catalyst concentration at 0.162M. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1711–1717, 1997     

Homopolymerization of cyclic esters initiated by lanthanide isopropoxides supported by 2,2′‐ethylene‐bis(4,6‐di‐tert‐butylphenolate) ligands

Lanthanide isopropoxides supported by carbon‐bridged bisphenolate ligands of 2,2′‐ethylene‐bis(4,6‐di‐tert‐butylphenoxo) {[(EDBP)Ln(μ‐OPrⁱ)(THF)₂]₂, where Ln is Nd ( 1 ), Sm ( 2 ), or Yb ( 3 ) and THF is tetrahydrofuran} were synthesized by protic exchange reactions in high yields with Cp₃Ln compounds as raw materials, and complex 1 was structurally characterized. Complexes 1 – 3 were shown to be efficient initiators for the ring‐opening polymerization of ε‐caprolactone (ε‐CL) and 2,2‐dimethyltrimethylene carbonate (DTC). Complexes 1 – 3 could initiate the controlled polymerization of ε‐CL, and the polymerization rate was first‐order with respect to the monomer. The influence of the reaction conditions on the monomer conversion, molecular weight, and molecular weight distribution of the resultant polymers was investigated. End‐group analyses of the oligomers of ε‐CL and DTC showed that the polymerization underwent a coordination–insertion mechanism. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4409–4419, 2006     

Solution characterization of the novel organometallic polymer poly(ferrocenyldimethylsilane)

A series of four well‐defined poly(ferrocenyldimethylsilane) (PFS) samples spanning a molecular weight range of approximately 10,000–100,000 g mol⁻¹ was synthesized by the living anionic polymerization of dimethyl[1]silaferrocenophane initiated with n‐BuLi. The polymers possessed narrow polydispersities and were used to characterize the solution behavior of PFS in tetrahydrofuran (THF). The weight‐average molecular weights (M_w ) of the polymers were determined by low‐angle laser light scattering (LALLS), conventional gel permeation chromatography (GPC), and GPC equipped with a triple detector (refractive index, light scattering, and viscosity). The molecular weight calculated by conventional GPC, with polystyrene standards, underestimated the true value in comparison with LALLS and GPC with the triple detection system. The Mark–Houwink parameter a for PFS in THF was 0.62 (k = 2.5 × 10⁻⁴), which is indicative of fairly marginal polymer–solvent interactions. The scaling exponent between the radius of gyration and M_w was 0.54, also consistent with marginal polymer–solvent interactions for PFS in THF. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3032–3041, 2000     

Synthesis and characterization of near‐monodisperse electron acceptor homopolymers of 2‐[(3,5‐dinitrobenzoyl)oxy]ethyl methacrylate

Homopolymers of 2‐(trimethylsiloxy)ethyl methacrylate of degrees of polymerization from 5 to 50 were synthesized by group transfer polymerization in tetrahydrofuran (THF) using 1‐methoxy‐1‐(trimethylsiloxy)‐2‐methyl propene as the initiator and tetrabutylammonium bibenzoate as the catalyst. These polymers were first converted to poly[2‐(hydroxy)ethyl methacrylate]s by removal of the trimethylsilyl‐protecting groups by acidic hydrolysis, and subsequently transformed to poly{2‐[(3,5‐dinitrobenzoyl)oxy]ethyl methacrylate}s by reaction with 3,5‐dinitrobenzoyl chloride in the presence of triethylamine. Gel permeation chromatography in THF and proton nuclear magnetic resonance (¹H NMR) spectroscopy in CDCl₃ and d₆ dimethyl sulfoxide were used to characterize the polymers in terms of their molecular weight and composition. The molecular weights were found to be close to the values expected from the polymerization stoichiometry and the molecular weight distributions were narrow, with polydispersity indices around 1.1. The hydrolysis and reesterification steps were found to be almost quantitative for all polymers. Differential scanning calorimetry and thermal gravimetric analysis were also employed to measure the glass transition temperatures (T_g 's) and decomposition temperatures, which were determined to be approximately 80 and 320 °C, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1457–1465, 2000     

Chain‐growth condensation polymerization of 4‐aminobenzoic acid esters bearing tri(ethylene glycol) side chain with lithium amide base

Chain‐growth condensation polymerization of p‐aminobenzoic acid esters 1 bearing a tri(ethylene glycol) monomethyl ether side chain on the nitrogen atom was investigated by using lithium 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) as a base. The methyl ester monomer 1a afforded polymer with low molecular weight and a broad molecular weight distribution, whereas the polymerization of the phenyl ester monomer 1b at ?20 °C yielded polymer with controlled molecular weight (M_n = 2800–13,400) and low polydispersity (M_w/M_n = 1.10–1.15). Block copolymerization of 1b and 4‐(octylamino)benzoic acid methyl ester ( 2 ) was further investigated. We found that block copolymer of poly 1b and poly 2 with defined molecular weight and low polydispersity was obtained when the polymerization of 1b was initiated with equimolar LiHMDS at ?20 °C and continued at ?50 °C, followed by addition of 2 and equimolar LiHMDS at ?10 °C. Spherical aggregates were formed when a solution of poly 1b in THF was dropped on a glass plate and dried at room temperature, although the block copolymer of poly 1b and poly 2 did not afford similar aggregates under the same conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1357–1363, 2010     

Synthesis of amphiphilic poly(methyl methacrylate‐ b‐ethylene oxide) copolymers from monohydroxy telechelic poly(methyl methacrylate) as macroinitiator

The synthesis of well‐defined poly(methyl methacrylate)‐block‐poly(ethylene oxide) (PMMA‐b‐PEO) dibock copolymer through anionic polymerization using monohydroxy telechelic PMMA as macroinitiator is described. Living anionic polymerization of methyl methacrylate was performed using initiators derived from the adduct of diphenylethylene and a suitable alkyllithium, either of which contains a hydroxyl group protected with tert‐butyldimethylsilyl moiety in tetrahydrofuran (THF) at ?78 °C in the presence of LiClO₄. The synthesized telechelic PMMAs had good control of molecular weight with narrow molecular weight distribution (MWD). The ¹H NMR and MALDI‐TOF MS analysis confirmed quantitative functionalization of chain‐ends. Block copolymerization of ethylene oxide was carried out using the terminal hydroxyl group of PMMA as initiator in the presence of potassium counter ion in THF at 35 °C. The PMMA‐b‐PEO diblock copolymers had moderate control of molecular weight with narrow MWD. The ¹H NMR results confirm the absence of trans‐esterification reaction of propagating PEO anions onto the ester pendants of PMMA. The micellation behavior of PMMA‐b‐PEO diblock copolymer was examined in water using ¹H NMR and dynamic light scattering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2132–2144, 2008     

Syntheses of well-defined star-shaped poly(tetrahydrofuran) polyols by the ion-coupling method

The prepoly(tetrahydrofuran) [poly(THF)] capped with hydroxyl and tetrahydrothiophenium groups was prepared using tetrahydrothiophene to terminate the living cationic polymerization of THF initiated by BF₃·OEt₂ and epichlorohydrin (ECH) at low conversion. Well-defined star-shaped poly(THF) polyols were synthesized by an ion-coupling reaction of the prepoly(THF) with tri- or tetrafunctional benzenecarboxylates, respectively, and this process proceeded by precipitation when the solution of the prepolymer in THF was added to an aqueous solution containing an excess of the corresponding coupling reagent. GPC studies showed that all of the carboxylate groups of every coupling reagent molecule took part in the ion-coupling reaction simultanously. This was confirmed by IR spectra. Almost all of the prepolymers were coupled to form star polymers after repeating the precipitation four times. ¹H-NMR illustrated that both the star-shaped polymers and the prepolymers contained primary and secondary hydroxyl end groups. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3403–3408, 1997     

Synthesis and characterization of polyurethane–polyvinylbenzyl chloride multiblock copolymers and their cationomers using a polyurethane macroiniferter

Polyurethane iniferter prepared from isocyanate end capped prepolymer and 1,1,2,2-tetraphenyl-1,2-ethanediol, has been used to polymerize vinylbenzyl chloride to obtain polyurethane-polyvinylbenzyl chloride multiblock copolymers. Formation of the block copolymers proceeds with increase in both molecular weight and conversion with increasing polymerization time showing that the polymerization proceeds via a “living” radical mechanism. The block copolymers so obtained were converted into their cationomers by the treatment of triethylamine. The block copolymers and their cationomers have been characterized by FTIR, FTNMR, TGA, and DSC studies. The effect of thermal energy on the molecular weight of the macroiniferter in the absence of monomer has been studied in order to understand the mechanism of formation of the block copolymers. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1237–1244, 1997     

Chain transfer to solvent in the radical polymerization of N‐isopropylacrylamide

Chain transfer to solvent has been investigated in the conventional radical polymerization and nitroxide‐mediated radical polymerization (NMP) of N‐isopropylacrylamide (NIPAM) in N,N‐dimethylformamide (DMF) at 120 °C. The extent of chain transfer to DMF can significantly impact the maximum attainable molecular weight in both systems. Based on a theoretical treatment, it has been shown that the same value of chain transfer to solvent constant, C_tr,S, in DMF at 120 °C (within experimental error) can account for experimental molecular weight data for both conventional radical polymerization and NMP under conditions where chain transfer to solvent is a significant end‐forming event. In NMP (and other controlled/living radical polymerization systems), chain transfer to solvent is manifested as the number‐average molecular weight (M_n) going through a maximum value with increasing monomer conversion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011