Naphthalene-ring containing diamine and resulting thermally stable polyamides

A new naphthalene-ring containing diamine, bis-[4-(5-amino-naphthalene-1-yloxy)-phenyl]-methanone was prepared from reaction of 5-amino-1-naphthol with 4,4′-dichlorobenzophenone in the presence of K₂CO₃. A series of novel polyamides were prepared by direct polycondensation of the diamine with various commercially available diacid chlorides including terephthaloyl chloride, isophthaloyl chloride, adipoyl chloride, and sebacoyl chloride. All the synthesized polyamides showed good solubility in amide type solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, and N,N-dimethylformamide and they exhibited inherent viscosities in the range of 0.44-0.52 dL/g. According to the DMTA analysis, the glass transition temperatures of the polyamides were found to be 131-187 °C. Thermogravimetric analysis indicated that the polymers were stable up to 190 °C and the 10% weight loss temperatures were recorded in the range of 350-418 °C in air atmosphere.     

Novel species of soluble thermally stable poly(keto ether ether amide)s: preparation,characterization, and properties

A new diamine containing one keto and four ether groups was prepared through a three‐step reaction: first, hydroquinone was reacted with 1‐fluoro‐4‐nitrobenzene and 4‐(4‐nitrophenoxy) phenol was obtained. The next step was reduction of nitro group to amino group in which 4‐(4‐aminophenoxy) phenol was prepared. In the final step, the new diamine named as bis(4‐(4‐(4‐aminophenoxy)phenoxy)phenyl) methanone was synthesized through reaction of the later compound with 4,4′‐difluoro benzophenone. All prepared materials were fully characterized by spectroscopic methods and elemental analysis. Novel species of poly(keto ether ether amide)s were synthesized via polymerization reaction of the diamine with different diacid chlorides including terephthaloyl chloride, isophthaloyl chloride, and adipoyl chloride. All polyamides were characterized, and their properties such as thermal behavior, thermal stability, solubility, viscosity, water uptake, and crystallinity were investigated and compared together. The glass transition temperatures of the polymers were about 204–232°C, and their 10% weight losses were in the range of 396–448°C. Polymers showed high thermal stability and enhanced solubility that mainly resulted from incorporation of the diamine structure containing keto, ether, and aromatic units into polyamide backbones. Copyright © 2014 John Wiley & Sons, Ltd.     

Linear polythioesters. VI. Products of interfacial polycondensation of bis/4-mercaptophenyl/ether with some aliphatic acid dichlorides

New polythioesters by interfacial polycondensation of bis/4-mercaptophenyl/ether with oxalyl, succinyl, adipoyl, suberoyl, or sebacoyl chlorides were obtained. To define the optimal conditions of the process, the polythioesters of dithiol and adipoyl or sebacoyl chlorides were chosen as a model system. Yield for all reaction products and reduced viscosity were found. The following factors were studied: organic phase, contribution of catalyst, concentration and molar ratio of reagents, rate of addition of acid chloride, temperature of reaction, contribution of emulsifier, and concentration of hydrochloride acceptor. The structure of all polythioesters was determined by elementary analysis, infrared spectra, and x-ray. Initial decomposition and initial intensive decomposition temperature were defined by the curves of thermogravimetric analysis. Some mechanical and electrical properties of polythioesters from dithiol and adipoyl or sebacoyl chlorides were studied. The molecular weights for these polymers were also determined by gel-chromatography.     

Synthesis and characterization of novel soluble and thermally stable polyamides based on pyridine monomer

Nucleophilic aromatic substitution reaction of 4-aminophenol and also 5-amino-1-naphthol with 2,6-dichloropyridine in N-methyl-2-pyrrolidone (NMP) as solvent, in the presence of potassium carbonate, afforded two aromatic ether diamines. Eight soluble, thermally stable polyamides were prepared by polycondensation reaction of the obtained diamines with aromatic and aliphatic diacid chlorides including terephthaloyl chloride (TPC), isophthaloyl chloride (IPC), adipoyl chloride (AC), and sebacoyl chloride (SC). The prepared monomers and polymers were characterized by conventional spectroscopic methods. Physical and thermal properties of the polymers, such as thermal behavior, thermal stability, solution viscosity, and solubility behavior were also studied.     

Linear polythioesters. V. Products of interfacial polycondensation of 4,4′-di(mercaptomethyl)-benzophenone with some aliphatic acid dichlorides

New polythioesters by interfacial polycondensation of 4,4′-di(mercaptomethyl) benzophenone with oxalyl, succinyl, adipoyl, suberoyl, and sebacoyl chlorides were obtained. To determine the optimal conditions for interfacial polycondensation the influence of the following factors on yield and value of reduced viscosity were studied: type of organic phase, the quantitative ratio of aqueous and organic phase, concentration of hydrogen chloride acceptor, molar ratio of reagents, temperature of reaction, rate of acid chloride addition, and contribution of catalyst and emulsifier. A thorough examination was carried out only for polycondensation of dithiol with adipoly and sebacoyl chlorides. The structure of all polythioesters obtained under the model conditions was determined by elementary analysis and infrared spectra. Initial decomposition and initial intensive decomposition temperature were defined from the curves of thermogravimetric analysis. Some mechanical and electrical properties of the polythioesters obtained from 4,4′-di(mercaptomethyl)benzophenone and adipoyl and sebacoyl chlorides were determined. The molecular weight was not measured because of the low solubility of the obtained polythioesters.     

Linear polythioesters. VII. Products of interfacial polycondensation of 1,4-di(mercaptomethyl)-2,3,5,6-tetramethylbenzene with some aliphatic acid dichlorides

Several polythioesters by interfacial polycondensation of 1,4-di(mercaptomethyl)-2,3,5,6-tetramethylbenzene with oxalyl, succinyl, adipoyl, suberoyl, and sebacoyl chlorides were obtained. To determine the optimal conditions for interfacial polycondensation, the influence of the following factors on yield and value of reduced viscosity were studied: type of organic phase, concentration of hydrogen chloride acceptor, the quantitative ratio of aqueous to organic phase, molar ratio of reagents; temperature of reaction, rate of acid chloride addition, and contribution of catalyst. Thorough studies were carried out only for polycondensation of the dithiol with adipoyl and sebacoyl chlorides. The structure of all polythioesters obtained under the model conditions was determined by elementary analysis and infrared spectra. Initial decomposition temperature, mass loss in percentage at the same temperature, maximum rate of decomposition, and mass loss percentage at 100–400°C were defined by thermogravimetric analyses. Chemical resistance of the polythioesters was determined by treatment with some organic solvents, mineral acids (concentrated and 10%), and sodium hydroxide (10 and 50%). Some mechanical and electrical properties of the polythioesters obtained from dithiol and adipoyl and sebacoyl chlorides were determined. The molecular weight was not measured because of the low solubility of the polythioesters.     

Synthesis and characterization of aromatic polyamides containing S-triazine rings in the main chain

Ten new aromatic polyamides containing s-triazine rings in the main chain were synthesized by the low temperature interfacial polycondensation technique involving the reactions of each of the two s-triazine containing diacylchlorides, viz., 2,4-bis (4-chlorocarbonylphenoxy)-6-methoxy-s-triazine and 2,4-bis(3-chlorocarbonylphenoxy)-6-methoxy-s-triazine, with five aromatic diamines namely, 4,4′-bis(4-aminophenoxy)diphenyl sulfone, 4,4′-bis(3-aminophenoxy)diphenyl sulfone, 2,2-bis[4(4-aminophenoxy) phenyl] propane, 1,4 bis (4-amino-phenoxy) benzene, and 1,3-bis (4-aminophenoxy)benzene. The resulting polyamides were characterized by viscosity measurements, IR and ¹H-NMR spectroscopy, solubility tests, x-ray diffraction, and thermogravimetry. The polyamides had inherent viscosities in the range of 0.16–1.06 dL/g in N,N-dimethylacetamide at 30°C. Most of the s-triazine containing polyamides dissolved readily at room temperature in polar solvents. Except for the polyamide PA-2, the polyamides did not lose weight below 350°C under a nitrogen atmosphere. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1077–1085, 1997     

Synthesis and characterization of optically active polyamides derived from carbohydrate-based monomers

The synthesis of three new stereoregular AB-type polyamides based on D -ribono-1,4-lactone, L -arabinose, and D -xylose has been carried out by the active ester polycondensation method. These polyamides were characterized by elemental analysis, IR and NMR spectroscopies, and powder X-ray diffraction. They displayed optical activity and had a pronounced affinity to water, although they were not soluble in this solvent. The polyamide obtained from D -ribono-1,4-lactone was highly crystalline and yielded films with spherulitic texture. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3645–3653, 1997     

Synthesis and characterization of new polyamides based on Diphenylaminoisosorbide

New aromatic polyamides were synthesized by the microwave‐assisted polycondensation of an optically active isosorbide‐derived diamine with different diacyl chlorides in the presence of a small amount of N‐methylpyrrolidinone. Polymers with inherent viscosities between 0.22 and 0.73 dL/g were obtained corresponding to molecular weights up to 140,000 g/mol. With interfacial polymerization or the Higashi method, lower molecular weight polymers were obtained with inherent viscosities in the range of 0.04–0.36 dL/g. Differential scanning calorimetry measurements clearly demonstrated the high thermal stability of these polymers (mp = 180–300 °C) and the absence of decomposition. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6480–6491, 2005     

Processable heat resistant polyamides containing tetraphenyl thiophene having pendant phenyl moiety with heterocyclic quinoxaline unit: Synthesis and characterization

A series of new polyamides containing tetraphenyl thiophene having pendant phenyl moiety with heterocyclic quinoxaline unit were synthesized by using the solution polycondensation method of novel diamine monomer V with isopthaloyl chloride (IPC) and terpthaloyl chloride (TPC) in various mole proportions. These novel polymers were characterized by FT-IR, solubility, inherent viscosity, thermal analysis and X-ray diffraction studies. Inherent viscosities of these polymers were in the range 0.66 to 1.44 dL/g indicating moderate to high molecular weight built-up. These polymers exhibited solubility in various solvents such as DMAc, NMP, pyridine, m-cresol etc. X-ray diffraction pattern of polymers showed that introduction of pendant phenyl moiety would disturb the chain regularity and packing, leading to amorphous nature. Thermal analysis by TGA and DSC showed excellent thermal stability of polymers. The structure -property correlation among these polyamides were studied, in view of these polymer's potential applications as processable high temperature resistance materials.     

Polymers from a levopimaric acid–acrylonitrile Diels–Alder adduct: Synthesis and characterization

The Diels–Alder adduct of levopimaric acid with acrylonitrile was efficiently prepared from resin acids. Excellent addition reaction yields (ca. 95%) were obtained. The adduct was converted into polyamides by polycondensation with diamines. When the same adduct was subjected to a dehydrodecarboxylation reaction, a novel ketone dinitrile derivative was obtained. This trifunctional product was also converted into polyamides by polycondensation with diamines. When the ketone dinitrile was hydrolyzed in the presence of alkalies and the reaction product was chlorinated, a ketone diacid chloride was obtained. A polyester was synthesized by the polycondensation of the diacid chloride with a diol. The structures of the Diels–Alder adduct, ketone dinitrile derivative, ketone diacid chloride, and polymers were established by means of elemental analysis, IR and NMR spectroscopy, and molecular weight determinations. Both the polyamides and the polyester were low‐molecular‐weight polymers soluble in polar solvents. The thermal behavior of the monomers and polymers was evaluated by thermogravimetric analysis. The thermal studies showed that the polymers were fairly thermostable substances, except the polyester, which appeared to be a substance with good thermal stability. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6308–6322, 2005     

含异丙基及三氟甲基可溶性聚酰胺的合成及性能研究

以含异丙基和三氟甲基结构二胺单体3,3′-二异丙基-4,4′-二胺基苯基-4″-三氟甲基甲苯(PATFT)与萘-1,4-二甲酸、间苯二甲酸和4,4-二苯醚二甲酸3种二酸通过膦酰化反应制备一系列新型可溶性聚酰胺,其相对分子量在3.8×104~9.6×104之间.结果表明,该聚合物具有优异的溶解性能,常温不仅能溶解于N-甲基吡咯烷酮(NMP)、N,N-二甲基乙酰胺(DMAc)、N,N-二甲基甲酰胺(DMF)等高沸点有机溶剂,在加热条件下甚至能较好的溶解在四氢呋喃、氯仿、二氯甲烷等低沸点溶剂中;突出的光学性能,截止波长范围在322~350 nm,80%的透过率波长范围为378~403 nm;良好的热学性能,玻璃化转变温度(Tg)范围在213~220?C,氮气氛围下5%和10%热失重温度范围分别为453~458?C和470~482?C.聚合物薄膜具有优异的机械性能,拉伸强度、杨氏模量、断裂伸长率分别对应为68~97 MPa,1.9~2.9 GPa,14.8%~16.7%.广角X-射线图谱表明聚合物为无定形态结构.     

A highly rigid diamine monomer derived from naturally occurring myo‐inositol and its use for polyamide synthesis

A rigid diamine was synthesized from myo‐inositol, a naturally occurring cyclic hexaol, and used as a monomer to synthesize polyamides. myo‐Inositol was treated with 1,1‐dimethoxycyclohexane to yield a bisketal bearing two hydroxyl groups, and from this bisketal, the target diamine was synthesized in three steps: (1) derivation of the diol into the corresponding bistriflate, (2) nucleophilic substitution of the bistriflate with sodium azide yielding a diazide, and (3) reduction of the diazide to the target diamine. The target diamine readily underwent polycondensation with dicarboxylic acid chloride in solution. The resulting polyamides, whose main chain inherited the rigid 5‐6‐5 system from the diamine monomers, have high glass transition temperatures. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3436–3443     

Synthesis and characterization of norbornane-containing cardo polyamides

A new diamine, 2,2-bis[4-(4-aminophenoxy)phenyl]norbornane (BAPN), containing both ether and norbornane cardo groups, was synthesized in three steps started from norcamphor. A series of cardo polyamides were obtained by the direct polycondensation of BAPN and various aromatic dicarboxylic acids in N-methyl-2-pyrrolidinone (NMP) using triphenyl phosphite and pyridine as condensing agents. Polyamides had inherent viscosities in the range of 0.82–1.58 dL g⁻¹, and were readily soluble in polar aprotic solvents such as NMP, N,N-dimethylacetamide (DMAc) and N,N-dimethylformamide and dimethyl sulfoxide. These polymers were cast in DMAc solution into transparent, flexible, and tough films that were further characterized by X-ray and mechanical analysis. All the polymers were amorphous, and the polyamide films had a tensile strength range of 71–89 MPa, an elongation at break range of 5–9%, and a tensile modulus range of 2.0–2.3 GPa. Polyamides showed glass transition temperatures in the range of 256–296°C as measured by DSC and thermogravimetric analysis indicated no weight loss below 450°C in nitrogen and air atmosphere. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2791–2794, 1999     

Synthesis and characterization of novel aromatic polyamides with polyalicyclic cardo groups

5,5-Bis[4-(4-carboxyphenoxy)phenyl]hexahydro-4,7-methanoindan ( 3a ) and 5,5-bis[4-(4-aminophenoxy)phenyl]hexahydro-4,7-methanoindan ( 3b ) were prepared in two main steps starting from the aromatic nucleophilic halogen-displacement of p-fluorobenzonitrile and p-chloronitrobenzene, respectively, with 5,5-bis(4-hydroxyphenyl)hexahydro-4,7-methanoindan in the presence of potassium carbonate in N,N-dimethylformamide (DMF). Using triphenyl phosphite and pyridine as condensing agents, two series of polyamides having polyalicyclic cardo units were directly polycondensated from dicarboxylic acid 3a with various aromatic diamines, or from diamine 3b with various aromatic dicarboxylic acids in the N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. High molecular weight polyamides with inherent viscosities between 0.73 and 1.44 dL/g were obtained. All polymers were readily soluble in polar aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc) and afforded transparent, flexible, and tough films by solution casting. The glass-transition temperatures (T_g) of these aromatic polyamides were in the range of 219–253°C by DSC, and the 10% weight loss temperatures in nitrogen and air were above 467 and 465°C, respectively. A comparative study of some polyamides with an isomeric repeat unit is also presented. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4510–4520, 1999     

Regular Copolyamides. IX. Some Aliphatic Aromatic Copolyoxamides

Abstract

Aromatic/aliphatic regular copolyoxamides were prepared from aromatic diamine-oxamides and aliphatic diacid chlorides of various lengths of methylene groups by solution polymerization. The aromatic diamine oxamides, N,N′-bis(4-aminophenyl)oxamide and N,N′-bis(3-aminophenyl)oxamide were prepared and both were reacted with adipoyl chloride, suberoyl chloride, and sebacoyl chloride to form six new regular copolyoxamides. The polymers formed were soluble in sulfuric acid and also in some polar amide solvents. All copolyoxamides were high melting, with the meta-phenylene copolyoxamides melting from 346 to 373°C with decreasing length of the aliphatic diacid chloride, and the para-phenylene copolyoxamides decomposing prior to melting at near 400°C. The new polymers were characterized by UV spectrophotometry, differential scanning calorimetry, and thermal gravitational analysis.     

Soluble aromatic polyamides modified by incorporation of 1,2,4-triazole and pentadecyl units into the backbone of polymer

Abstract

A new series of soluble aromatic polyamides was synthesized by low temperature solution polycondensation of novel aromatic diamine namely 3,5-bis-(4′-amino phenyl)-4-(4″-methoxy-2″-pentadecyl phenyl) 1,2,4-triazole (VII) with aromatic diacid chlorides, viz. isophthaloyl chloride (IPC) and terephthaloyl chloride (TPC). The aromaticdiamine (VII) was characterized by elemental analysis, FT-IR, NMR (¹H, ¹³C), and mass spectrometry. Copolyamides were also synthesized by employing various mole proportions of IPC and TPC with diamine (VII). Inherent viscosities of these polyamides were in the range of 0.50–0.65 dL/g in DMAc, indicating formation of moderate to high molecular weight of polyamides. These polyamides showed good solubility in polar aprotic solvents such as N,N-Dimethyl acetamide (DMAc), N-Methyl 2-pyrrolidone (NMP), N, N, Dimethyl formamide (DMF), and Dimethyl sulphoxide (DMSO), which may be due to incorporation of pendant methoxyphenyl moiety with pentadecyl units. The amorphous morphology of polyamides as evidenced by XRD. These polyamides had lower glass transition temperatures; as determined by DSC, compared to the T_g of conventional aromatic polyamides due to internal plasticization effect of long alkyl pentadecyl group. Polymers showed good thermal stability, with initial decomposition temperature above 300?°C.     

Macrocycles 11. Polycondensations of aliphatic dicarboxylic acid dichlorides with catechol or bis-trimethylsilyl catechol

When O,O′-Bistrimethylsilyl catechol (BTSC) was polycondensed with adipoyl chloride in o-dichlorobenzene the 10-membered cyclic monomer was the main reaction product regardless of the concentration. Even the polycondensation in bulk yielded the macrocyclic monomer as the main product. Polycondensations of free catechol yielded similar results. Polycondensations of catechol or BTSC with suberoyl chloride, sebacoyl chloride, and decane-1,10-dicarbonyl chloride in concentrated solutions or in bulk yielded cyclic oligoesters as the main reaction products whereas linear oligoesters or polyesters were a minority. Polycondensations of BTSC with the longer diacid dichlorides in refluxing o-dichlorobenzene under high dilution yielded the 12–14-membered cyclic monomers as the main products. The molecular weights and the cyclic structure of all reaction products were characterized by mass spectrometery, fast-atom bombardment (FAB) or MALDI-TOF mass spectrometry. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3861–3870, 1999     

Novel aromatic polyamides containing 2‐diphenylamino‐(9,9‐dimethylamine) units as multicolored electrochromic and high‐contrast electrofluorescent materials

A series of electrochromic and photoluminescence‐active polyamides 4a‐4e were prepared from a novel dicarboxylic acid, N,N‐di(4‐carboxyphenyl)‐2‐amino‐9,9‐dimethylfluorene, and five diamines via a condensation polymerization. These polyamides were amorphous and readily soluble in many solvents. The glass transition temperatures were in the range of 281–339 °C and the 10% weight loss temperatures in nitrogen were in excess of 490 °C. The polyamides exhibited strong fluorescence in either solution or solid states. The polyamides 4a‐4d showed reversible electrochemical redox with color changing from colorless to grey‐green. Specially, the polyamide 4e with 2‐diphenylamino‐(9,9‐dimethylamine) group in both diamine and dicarboxylic acid residues exhibited multicolored electrochromic behaviors. Furthermore, the fluorescence of these polyamides could be reversibly electroswitched with a high contrast up to 221.4, enabling their potential applications in dual‐switching electrochromic/electrofluorescent materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 213–222     

Synthesis and characterization of new soluble polyamides derived from 2,6-bis(4-aminophenyl)-3,5-dimethyltetrahydro-4H-pyran-4-one

A new oxypyrone diamine, 2,6-bis(4-aminophenyl)-3,5-dimethyltetrahydro-4H-pyran-4-one (DAPP), was prepared from 4-nitrobenzaldehyde and 3-oxa-n-pentane in a two-step reaction with a high yield and a high purity. Aromatic polyamides were obtained from this novel condensation monomer and several diacid chlorides through the conventional low-temperature solution method in N,N-dimethylacetamide. Polycondensation results were consistent with a high reactivity for DAPP because high yields and high molecular weight polyamides were obtained with inherent viscosities up to 1.8 dL/g. The reactivity of DAPP was also estimated with theoretical calculations from computer programs for molecular simulation, with orbital and charge factors considered. The polymers showed improved solubility in organic solvents, relative to conventional wholly aromatic polyamides, and high glass-transition temperatures (from differential scanning calorimetry) over 270 °C. However, the thermal resistance, as estimated by thermogravimetric analysis, was lower than that of conventional aromatic polyamides; nevertheless, decomposition temperatures well beyond 300 °C were observed in nitrogen and air. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1825–1832, 2001