Comparisons between cationic polyelectrolytes and nonionic polymers for the protection of palladium and platinum nanocatalysts

Several palladium and platinum nanocatalysts protected by cationic polyelectrolytes were prepared by the in-situ reduction of palladium chloride, PdCl₂, and dihydrogen hexachloroplatinate, H₂PtCl₆. The particle sizes and size distributions were determined by transmission electron microscopy, and the colloids were further characterized by UV-vis spectroscopy. The catalytic activity of these nanoparticles was qualitatively investigated by the hydrogenation and conversion of cyclohexene as a model reaction and compared to palladium and platinum colloids protected by a selection of water-soluble, nonionic polymers. The results show that the catalytic activity is strongly influenced by the protective polymer chosen, as well as particle size and morphology. The use of cationic polyelectrolytes decreases the catalytic activities significantly, in comparison to several water-soluble, nonionic polymers investigated. The effects depend strongly on the particular metal, as illustrated in this case by differences observed between palladium and platinum. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3151–3160, 1997     

Transition metal nanoparticles protected by amphiphilic block copolymers as tailored catalyst systems

 Several stable palladium, platinum, silver, and gold colloids were prepared by reducing the corresponding metal precursors in the presence of protective amphiphilic block copolymers. Some palladium and platinum precursors with different hydrophobicities, namely palladium chloride PdCl₂, palladium acetate Pd (CH₃COO)₂, hexachloroplatinic acid H₂PtCl₆, and platinum acetylacetonate Pt (CH₃COCH=C(O–)CH₃)₂, have been used in order to investigate differences in their catalytic activity. The polymers investigated for their ability to stabilize such transition metal colloids were polystyrene-b-poly(ethylene oxide) and polystyrene-b-poly(methacrylic acid). The metal particle sizes and morphologies were determined by transmission electron microscopy and found to be in the M28.8nnanometer range. The catalytic activity of the palladium and platinum colloids was tested by the hydrogenation of cyclohexene as a model reaction. The protected palladium and platinum nanoparticles were found to be catalytically active, and final conversions up to 100% cyclohexane could be obtained. Depending on the choice of polymer block types and lengths, the precursor type, and the reduction method, different nanoparticle morphologies and catalytic activities could be obtained. These novel catalytically active metal–polymer systems are thus promising candidates for the development of tailored catalyst systems. Received: 10 June 1996 Accepted: 30 October 1996     

Rapid,efficient and selective reduction of aromatic nitro compounds with hydrazine hydrate in the presence of the plain and supported platinum nanoparticles as catalysts

The current study aimed at application of the plain and supported platinum nanoparticles as a heterogenous catalyst for the reduction of aromatic nitro compounds. Monodispersed platinum nanoparticles were synthesized by reduction of H₂PtCl₆ by ethanol in the presence of polyvinyl pyrrolidone as a stabilizer, and then were immobilized on four types of zeolites. The obtained catalyst granules were characterized by X-ray diffractometry and transmission electron microscopy. The study then focused on elaboration of the catalytic activity of the nano catalysts under different operational conditions. It was found that reaction is adequately rapid at ambient temperature, and by utilizing a sufficient amount of catalyst, can be completed in nearly 30 min. Among the utilized zeolitic supports, zeolite 4A had the highest performance, but the mechanism of its synergetic effect on the activity of platinum nano catalyst was not found and requires more investigation.     

Development and application of latent hydrosilylation catalysts [2]—Control of catalytic activity of platinum catalyst by polystyrene derivatives having propargyl moieties

A new thermal latent hydrosilylation catalyst on the basis of H₂PtCl₆ and polystyrene derivatives having propargyl moieties is described. The polystyrene derivatives having various propargyl moieties were obtained by the reaction of propargyl alcohols with poly(p‐chloromethylstyrene) or its copolymer with styrene. The polymer‐supported platinum catalysts were prepared by aging H₂PtCl₆ with these polymers in tetrahydrofuran at 30 °C for 12 h. In the presence of the polymers, the hydrosilylation activity of H₂PtCl₆ was found to be controlled thermally in the model reaction of trimethylsilane and triethylvinylsilane. Effective control of the crosslinking reaction of silicone resin was also achieved by using these latent catalyst systems. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 35–42, 2000     

Catalysis of hydrosilylation,part XXII: Polymer-protected immobilized platinum complex catalysts for gas-phase hydrosilylation of acetylene

A platinum catalyst (hexachloroplatinic acid dissolved in ethanol) was immobilized by anchoring via amine and mercapto groups to silica followed by formation of a polymer layer which protected the catalyst against leaching. These catalysts (A and B) as well as precatalysts (S_A-Pt, S_B-Pt) which were not protected by polymer were tested in the gas-phase hydrosilylation reaction of acetylene with trichlorosilane. The catalytic parameters (yield 80%, selectivity 100%) obtained under optimal conditions prove the advantage of catalyst A over 300 h reaction time by the flow method.     

Star polymers by cross‐linking of linear poly(benzyl‐L‐glutamate) macromonomers via free‐radical and RAFT polymerization. A simple route toward peptide‐stabilized nanoparticles

Poly(benzyl‐L ‐glutamate) (PBLG) macromonomers were synthesized by N‐carboxyanhydride (NCA) polymerization initiated with 4‐vinyl benzylamine. MALDI‐ToF analysis confirmed the presence of styrenic end‐groups in the PBLG. Free‐radical and RAFT polymerization of the macromonomer in the presence of divinyl benzene produced star polymers of various molecular weights, polydispersity, and yield depending on the reaction conditions applied. The highest molecular weight (M_w) of 10,170,000 g/mol was obtained in a free‐radical multibatch approach. It was shown that the PBLG star polymers can be deprotected to obtain poly(glutamic acid) star polymers, which form water soluble pH responsive nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Size effects of PtcoreAgshell and AgcorePtshell nanoparticles on their catalytic activity in aqueous solutions

Platinum colloids in an aqueous solution catalyze the reduction of silver ions by hydrogen to form Pt-Ag core-shell bimetallic nanoparticles. In the presence of the silver nanoparticles, Pt^II ions are reduced by hydrogen to form Ag_corePt_shell nanoparticles. The effect of the structure and composition of the nanoparticles on the ability of platinum to catalyze the one-electron reduction of methyl viologen by hydrogen in an aqueous solution was studied. For the Pt_coreAg_shell nanoparticles, an induction period preceding the start of the reaction was found. The thicker the silver shell on platinum, the longer the lag time of the reaction, which is probably due to a decrease in the rate of hydrogen transfer to the platinum core. For the Ag_corePt_shell nanoparticles, the size effect was revealed: at the shell thickness less than 1 nm (～4 atomic layers of platinum), platinum loses the ability to catalyze the reaction. The mechanism of the catalytic process is discussed.     

Chlorotitanium (IV) tetradentate Schiff‐base complex immobilized on inorganic supports: Support type and other factors having effect on ethylene polymerization activity

A titanium complex with [O,N,N,O]‐type tetradentate Schiff base (LTiCl₂), never used before in polymerization of olefins, was immobilized on silica‐ and magnesium‐type carriers, and it was used in ethylene polymerization. The conducted research revealed that the catalytic properties of the complex LTiCl₂ supported on those carriers were different for both the catalytic systems studied, and simultaneously they turned out different from those of the unsupported system. The supported catalysts require the use of Me₃Al, Et₃Al, or MAO as the activator to be able to offer high catalytic activities, whereas Et₂AlCl is needed for the nonsupported catalyst. This finding, together with considerable changes in polymerization yields and in properties of polymers versus composition of the catalytic system, suggest that there are different types of active sites in the studied catalysts. The catalyst anchored on the carrier produced in the reaction of MgCl₂·3.4EtOH with Et₂AlCl is definitely the most active one within the support systems tested. Its activity remarkably increases with the increasing reaction temperature. Moreover, that catalyst does not undergo deactivation over the studied period of time, irrespective of the type of the activator used and of the process temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4811–4821, 2009     

Ring opening polymerization of propylene oxide by chitosan-supported rare earth catalytic system and its kinetics

Ring opening polymerization of propylene oxide in the presence of a new type of catalytic system composed of chitosan-supported rare earth complex, triisobutyl aluminium, and acetylacetone and its kinetics have been studied for the first time. It has been found that the characteristics of this catalytic system are of high catalytic activity, of higher stereoselectivity, and of a high molecular weight polymer of 2 × 10⁶. Kinetic studies show that the polymerization rate is first order with respect to monomer concentration and catalyst concentration, respectively. The apparent activation energy of the polymerization reaction is 37.1 kJ/mol. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2177–2182, 1997     

Pyrolysis of chloroplatinic acid to directly immobilize platinum nanoparticles onto multi-walled carbon nanotubes

Platinum nanoparticles supported on multi-walled carbon nanotubes (Pt/MWCNTs) were first prepared by simple pyrolysis of H₂PtCl₆ solution. The structure of Pt/MWCNTs was characterized with X-ray diffraction (XRD), scanning electron microscope (SEM), and the results showed that the diameter of the obtained platinum nanoparticles immobilized on MWCNTs was below 50 nm, although the obtained platinum nanoparticles were not well uniformly dispersed on the surface of MWCNTs. The electrocatalytic performance of Pt/MWCNTs electrode for methanol oxidation reaction (MOR) was also investigated by linear sweep voltammetry (LSV), indicating that it was possible to employ the obtained platinum nanoparticles as anode material in fuel cell. Developing a novel and simple method to prepare platinum nanoparticles onto MWCNTs is the main contribution of this letter. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 8, pp. 1050–1053. The text was submitted the authors in English.     

The mechanism of oxygen catalytic reduction in the presence of platinum and silver nanoparticles

The reaction of oxygen reduction on the mercury electrode in the solution of the reversed micelles and in the presence of platinum and silver nanoparticles was studied. The data of inverse voltammetry show that in the presence of platinum nanoparticles the reaction can proceed via both two-electron and four-electron reaction mechanisms. In the case of silver nanoparticles it proceeds in accordance with the two-electron mechanism. Cumulative effect of catalytic action of platinum and silver nanoparticles on the molecular oxygen reduction was found.     

Synthesis of silylene–propenylene oligomers via catalytic polycondensation of diallyldiorganosilanes

Acyclic diene polycondensation (ADP) of diallyldiorganosilanes (CH₂CHCH₂)₂SiR₂ (where R = Me, Ph), in the presence of various ruthenium and rhodium complexes, led predominantly to linear silylene–propenylene oligomers. Ruthenium catalysts (e.g. RuCl₂(PPh₃)₃, RuHCl(CO)(PPh₃)₃, and RuCl(SiMe₃)(CO)(PPh₃)₂) were found to be more efficient than the rhodium ones. The reaction proceeds via preliminary catalytic isomerization of allylsilane to silyl-1-propenes followed by their oligococondensation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3299–3304, 1997     

Transition metal-catalyzed tandem isomerization and cationic polymerization of allyl ethers. II. Structural and mechanistic studies

In the presence of organosilanes, dicobalt octacarbonyl catalyzes the polymerization of alkyl allyl ethers to give high molecular weight polymers. This article reports the results of a detailed mechanistic study of this new polymerization reaction. The evidence obtained in this study supports a stepwise process involving first, the reaction of dicobalt octacarbonyl with an organosilane to form HCo(CO)₄ and R₃SiCo(CO)₄. In subsequent steps, HCo(CO)₄ isomerizes the allyl ether to a 1-propenyl ether and then this compound is polymerized by the formal transfer of a silyl cation from R₃SiCo(CO)₄. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1985–1997, 1997     

Comparative study of amphiphilic hyperbranched and linear polymer stabilized organo‐soluble gold nanoparticles as efficient recyclable catalysts in the biphasic reduction of 4‐nitrophenol

A series of organo‐soluble spherical gold nanoparticles (AuNPs) were prepared through the reduction of HAuCl₄ by NaBH₄ in the presence of amphiphilic hyperbranched polymers that had a hydrophilic hyperbranched polyethylenimine core and a hydrophobic shell formed by many palmitamide (C16) chains. For comparison, the corresponding linear polymeric analog derived from linear polyethylenimine was also used to prepare the organo‐soluble AuNPs. The obtained AuNPs were characterized by transmission electron microscopy. It was found that higher feed ratio of polymer to HAuCl₄ and utilization of polymers with higher C16 density usually resulted in smaller AuNPs with relatively lower polydispersity. Except of the polymer having the pronounced low molecular weight, the molecular weight and the morphology of the amphiphilic polymers had almost no obvious effect on the size of the formed AuNPs. These organo‐soluble AuNPs could be used as efficient catalysts for the biphasic catalytic reduction of 4‐nitrophenol by NaBH₄. Their apparent rate coefficients had correlation with the molecular weight of the used amphiphilic polymers, but were less relevant to the morphology of these polymers. These organo‐soluble AuNPs could be conveniently recovered and reused many times. The morphology of the capping polymers had obvious effect on the lifetime of the AuNPs catalysts in the catalytic reduction of 4‐nitrophenol. Except of the pronounced low molecular weight hyperbranched polymer, the other hyperbranched ones with relatively high molecular weight rendered the AuNPs to have bigger turnover number values than their linear analog. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Simultaneous construction of a polyether backbone and a variety of keto side chains by three‐component polycondensation: An improved method for the use of a variety of silyl enol ethers

For the synthesis of polyethers with a variety of keto side chains in a one‐step reaction, the three‐component polycondensation of dialdehydes, diol disilyl ethers, and silyl enol ethers of ketones was investigated. The method of monomer addition strongly affected the molecular weight of polymers and was optimized to yield high molecular weight polymers by model reactions. A variety of dialdehydes, diol disilyl ethers, and silyl enol ethers were polymerized in the presence of a catalytic amount of triphenylmethyl (trityl) perchlorate in CH₂Cl₂ at −78 °C according to the method of monomer addition. This polymer synthesis was unusual in that it concurrently constructed both the polyether backbone and the keto side chains from three starting compounds. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 179–188, 2000     

Development and application of a latent hydrosilylation catalyst. IX. Control of the catalytic activity of a platinum catalyst by polymers bearing amine moieties

A new thermal‐latent hydrosilylation catalyst consisting of H₂PtCl₆ and polymers bearing amine moieties is described. In the presence of aminated polymers, the catalytic activity of H₂PtCl₆ was suppressed remarkably in the model reaction of triethylsilane with trimethylvinylsilane, whose effect was remarkably higher in comparison with monomeric amines. On heating, however, sufficient catalytic activity was attained where the activation temperature was dependent on the amine content in the polymer and polymer structure. Furthermore, this catalyst system was applied to the curing process of silicone resin to confirm the thermal‐latent character of the catalyst. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 804–809, 2000     

Effect of Substituents on Nitrobenzene Reduction in the Presence of a Platinum Catalyst

The effect of substituted nitrobenzene structure on the kinetics of their catalytic reduction in propanol-2 in the presence of a platinum catalyst is studied. The reaction order with respect to a nitro compound changes in the series of the studied substrates. A satisfactory correlation between the apparent rate constants for the reaction and the E _LUMO values of the substrates is observed for several nitro compounds.     

Ring‐opening polymerization of ε‐caprolactone and L‐lactide from silica nanoparticles surface

Coating of silica nanoparticles by biocompatible and biodegradable polymers of ε‐caprolactone and L ‐lactide was performed in situ by ring‐opening polymerization of the cyclic monomers with aluminum, yttrium, and tin alkoxides as catalysts. Hydroxyl groups were introduced on the silica surface by grafting of a prehydrolyzed 3‐glycidoxypropyl trimethoxysilane to initiate a catalytic polymerization in the presence of metal alkoxides. In this manner, free polymer chains were formed to grafted ones, and the graft density was controlled by the nature of the metal and the alcohol‐to‐metal ratio. The grafting reaction was extensively characterized by spectroscopic techniques and quantified. Nanocomposites containing up to 96% of polymer were obtained by this technique. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1976–1984, 2004     

H3PMo12O40‐immobilized chitosan/Co3O4: A novel and recyclable nanocomposite for the synthesis of pyrimidinedione derivatives

An efficient three‐component reaction of aromatic aldehydes, 6‐aminouracil/6‐amino‐1,3‐dimethyluracil and 4‐hydroxycoumarin in the presence of a novel heterogeneous catalyst H₃PMo₁₂O₄₀‐immobilized Co₃O₄/chitosan led to a synthesis of a new class of pyrimidinedione derivatives under reflux conditions. The magnetically recoverable nanocomposite of Co₃O₄/chitosan/H₃PMo₁₂O₄₀ was fully characterized by Fourier transform‐infrared spectrophotometry, scanning electron microscopy, X‐ray powder diffraction, energy‐dispersive X‐ray spectroscopy, vibrating‐sample magnetometry and N₂ adsorption–desorption by Brunauer–Emmett–Teller analysis. Results show that Keggin‐type 12‐molybdophosphoric acid immobilized into the network of the cross‐linked chitosan with super‐paramagnetic Co₃O₄ nanoparticles. The present method offers several advantages, such as simple procedure, short reaction times and excellent yields of products. The novelty of the catalyst, high catalytic activity, easy separation from the reaction with an external magnetic field and reusability of the catalyst in six consecutive runs are additional eco‐friendly attributes of this catalytic system.     

Polymer-Protected Palladium Nanoparticles and Their Use in Catalysis

Abstract

Stable palladium colloids were prepared by the in-situ reduction of palladium chloride (PdCl₂) in the presence of protective water-soluble polymers and cationic polyelectrolytes. The particle sizes, morphologies, and particle-size distributions were determined by transmission electron microscopy and found to be in the nanometer size range. The catalytic activity of these colloidal metal-polymer systems was tested by the hydrogenation of cyclohexene as a model reaction. Most of the polymer-protected palladium nanoparticles were found to be catalytically active, and final conversions up to 100% were obtained in many cases.