A novel synthesis of polyethers with pendant hydroxyl groups by polyaddition of bis(oxetane)s with bis(phenol)s

The polyaddition of 1,4-bis[(3-ethyl-3-oxetanyl)methoxymethyl]benzene (BEOB) with 3,3′,5,5′-tetrachlorobisphenol A (TCBPA) was examined with or without catalysts. High molecular weight polymer (polymers 1) (M_n = 13,600) with pendant primary hydroxyl groups was obtained in a 99% yield without any gel products when the reaction was performed with 5 mol % of tetraphenylphosphonium bromide as a catalyst in NMP at 160°C for 96 h. However, when the reaction was carried out without a catalyst under the same conditions, a low molecular weight polymer (M_n = 3200) was obtained in a 51% yield. The structure of the resulting polymer was confirmed by IR, ¹H-NMR, and ¹³C-NMR spectra. In this reaction system, it was also found that tetraphenylphosphonium iodide and crown ether complexes such as 18-crown-6 (18-C-6)/KBr and 18-C-6/KI have high catalytic activity. Polyadditions of 1,4-bis[(3-methyl-3-oxetanyl)methoxymethyl]benzene with TCBPA and BEOB with 3,3′,5,5′-tetrabromobisphenol-S were also examined, and corresponding polymers (polymers 2 and 3) were obtained in good yields. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2781–2790, 1999     

Synthesis of polymers with pendant hydroxyl groups by polyaddition of bis(oxetane)s with dithiols

Addition reaction of (3-methyl-3-oxetanyl)methyl acetate (MOMA) with bis(4-mercaptophenyl) sulfide (BMPS) was examined in certain organic solvents. When the reaction of MOMA with BMPS was performed without any catalyst in hexamethylphosphoric triamide (HMPA) and N-methyl-2-pyrrolidone (NMP) at 130°C for 24 h, conversions of the corresponding adduct were 96 and 36%, respectively, which was confirmed by ¹H-NMR spectra. On the other hand, when the reaction was carried out using tetraphenylphosphonium bromide (TPPB) as a catalyst under the same conditions, conversions of the adduct were 96 and 81% in HMPA and NMP, respectively. This result shows that although the addition reaction of oxetane compound with aromatic dithiol proceeds without any catalyst in HMPA, the reaction was strongly enhanced by adding TPPB in NMP. On the basis of the above results, polyadditions of bis((3-methyl-3-oxetanyl)methyl) terephthalate (BMOT) and bis((3-ethyl-3-oxetanyl)methyl) terephthalate with BMPS were performed using TPPB as the catalyst in NMP at 130°C for 24 h. As a result, the corresponding high molecular weight polymers 1 (M_n = 22,400) and 2 (M_n = 12,800) with pendant primary hydroxyl groups were obtained in 83 and 89% yields without any gel products, respectively. Furthermore, a low molecular weight oligomer was obtained from the polyaddition of BMOT with aliphatic dithiol, bis(mercaptomethyl)benzene, under the same reaction conditions. The catalytic activity on the polyaddition of BMOT with BMPS was also examined, and it was found that thermally stable TPPB and crown ether complexes at the reaction temperature (130°C) have higher catalytic activity than tetrabutylammonium bromide and tetrabutylphosphonium bromide to produce polymer 1 with high molecular weight. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2873–2880, 1998     

A novel polyaddition of bis(epoxide)s with triazine diaryl ether for the synthesis of poly(ether)s containing triazine group in the main chain

Poly(ether)s (P‐1–P‐4) containing triazine groups in the main chain and pendant phenoxy groups in the side chain were synthesized by the polyaddition of bis(epoxide)s with 2,4‐di‐(p‐chlorophenoxy)‐6‐(diphenylamino)‐s‐triazine (DCTA) with quaternary onium salts or crown ether complexes as catalysts. The polyaddition of diglycidyl ether of bisphenol A with DCTA proceeded smoothly in chlorobenzene at 120 °C for 24 h to give P‐1 with a number‐average molecular weight of 24,800 in a 95% yield when tetraphenylphosphonium chloride (TPPC) was used as a catalyst; however, no reaction occurred without a catalyst under the same reaction conditions. Polyadditions of other bis(epoxide)s with DCTA also proceeded smoothly with 5 mol % TPPC as a catalyst in chlorobenzene to produce the corresponding polymers (P‐2–P‐4) in high yields under similar reaction conditions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3604–3611, 2000     

Synthesis of poly(cyanurate)s by a novel polyaddition of bis(epoxide)s with triazine dichloride

Poly(cyanurate)s (P‐1–P‐4) containing triazine groups in the main chain and pendant chloromethyl groups in the side chain were synthesized by the polyaddition of bis(epoxide)s with 2,4‐dichloro‐6‐(diphenylamino)‐s‐triazine (DPAT) using quaternary onium salts as catalysts. The polyaddition of diglycidyl ether of bisphenol‐A (DGEBA) with DPAT proceeded smoothly in chlorobenzene at 100 °C for 12 h to give P‐1 with M_n = 19,000 in a 92% yield, when tetrabutylammonium chloride (TBAC) was used as a catalyst. However, no reaction occurred without a catalyst or with triethylamine alone under the same reaction conditions. Polyadditions of other bis(epoxide)s with DPTA also proceeded smoothly using 5 mol % of TBAC as a catalyst in chlorobenzene to produce corresponding polymers (P‐2≈P‐4) in high yields under similar reaction conditions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4006–4012, 2000     

Novel synthesis of polyphosphonates by the polyaddition of bis(epoxide) with diaryl phosphonates

The polyaddition of bisphenol A diglycidyl ether (BPGE) with bis(4‐chlorophenyl) phenylphosphonate was carried out using quaternary onium salts or crown ether complexes as catalysts. When the polyaddition was performed using tetrabutylammonium chloride, tetrabutylphosphonium chloride, or 18‐crown‐6/KCl in N‐ methyl‐2‐pyrrolidone at 110°C for 48 h, the corresponding polyphosphonate with moderated molecular weights was obtained in 88–96% yields. The structure of the resulting polyphosphonate was confirmed by IR and ¹H‐NMR spectra. The polyaddition of BPGE with various diaryl phosphonates also proceeded very smoothly to produce the corresponding polyphosphonates with moderate molecular weights. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 959–965, 1999     

Synthesis and characterization of fluoropolymers by the polyaddition of bis(epoxide)s with dicarboxylic acids and diols

The synthesis and characterization of the fluoropolymers poly 1a – 1d and poly 2a – 2d with pendant hydroxyl groups were examined. The polyaddition of bis(epoxide)s [2,2′‐bis(4‐glycidyletherphenyl)hexafluoropropane and bisphenol A diglycidyl ether] with dicarboxylic acids (tetrafluoroterephthalic acid and terephthalic acid) and diols [2,2′‐bis(4‐hydroxyphenyl)hexafluoropropane, 2,2′,3,3′,5,5′,6,6′‐octafluoro‐4,4′‐biphenol, 1,4‐bis(hexafluorohydroxyisopropyl)benzene, and 1,3‐bis(hexafluorohydroxyisopropyl)benzene] was carried out at 50–100 °C for 6–48 h in the presence of quaternary onium salts (tetrabutylammonium bromide, tetrabutylammonium chloride, tetrabutylphosphonium bromide, and tetrabutylphosphonium chloride; 2.5 mol %) as catalysts in dimethyl sulfoxide, N‐methylpyrrolidone, dimethylformamide, dimethylacetamide, dioxane, diglyme, o‐dichlorobenzene, chlorobenzene, and toluene to afford the corresponding polymers, poly 1a – 1d and poly 2a – 2d , with number‐average molecular weights of 11,000–59,400 in 45–97% yields. The solubility of the obtained polymers was good, and their thermal stability might be assumed from their structures. A linear relationship was observed between the contents of the fluorine atoms and the refractive indices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1395–1404, 2002     

Synthesis of poly(silyl ether)s containing pendant chloromethyl groups by the polyaddition of bis(oxetane)s with dichlorosilanes

The polyaddition of bis(3‐ethyl‐3‐oxetanylmethyl) terephthalate (BEOT) with dichlorodiphenylsilane (CPS) using tetrabutylammonium bromide (TBAB) as a catalyst proceeded under mild reaction conditions to afford a polymer containing silicon atoms in the polymer main chain. A poly(silyl ether) (P‐1) with a high molecular weight (M_n = 53,200) was obtained by the reaction of BEOT with CPS in the presence of 5 mol % of TBAB in toluene at 0 °C for 1 h and then at 50 °C for 24 h. The structure of the resulting polymer was confirmed by IR and ¹H NMR spectra. Furthermore, it was proved that the polyaddition of certain bis(oxetane)s with dichlorosilanes proceeds smoothly to give corresponding poly(silyl ether)s with TBAB as the catalyst. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2254–2259, 2000     

Synthesis and properties of fluorine‐containing polyethers with pendant hydroxyl groups by the polyaddition of bis(epoxide)s with diols

Fluorine‐containing polyethers with pendant hydroxyl groups were synthesized by the polyaddition of fluorine‐containing bis(epoxide)s with certain fluorine‐containing diols with quaternary onium salts as catalysts. When the polyaddition was performed with 2,2′,6,6′‐tetrafluoro‐4,4′‐biphenol diglycidiyl ether and 2,2′,6,6′‐tetrafluoro‐4,4′‐biphenol, the corresponding polyether with pendant hydroxyl groups was successfully obtained in good yield. The polyaddition of certain fluorine‐containing bis(epoxide)s with diols also proceeded in bulk to provide the corresponding fluorine‐containing polyethers with high molecular weights. These polyethers were highly transparent at 157 nm for 0.1 μm thickness, with their transmittance of 14–75% at 157 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2543–2550, 2004     

Novel synthesis of polyethers by the polyaddition of bis(epoxide)s with bis(phosphinate)s

The polyaddition of bisphenol A diglycidyl ether with bis[4‐(P,P‐diphenylphosphinyloxy)phenyl] sulfone catalyzed by quaternary onium salt, such as tetrabutylammonium chloride afforded a new phosphorus‐containing polyether with good solubility in common organic solvents. Having studied various factors affecting the reaction, such as temperature, catalyst concentration, reaction time, etc., an appropriate polyaddition condition was suggested as using 5 mol % of suitable quaternary ammonium or phosphonium salt in polar solvent at 150°C within 25 h in an ampule for producing high molecular weight polymer. A number of polyethers bearing pendent phosphinate ester groups from the polyaddition of certain bis(epoxide)s and bis(phosphinate)s were synthesized under the above condition and characterized by GPC, IR, and NMR. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1009–1016, 1999     

Synthesis of polyphosphonates containing pendant chloromethyl groups by the polyaddition of bis(oxetane)s with phosphonic dichlorides

The polyaddition of 4,4′‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]biphenyl (4,4′‐BEOBP) and phenylphosphonic dichloride (PPDC) with quaternary onium salts as catalysts proceeded under mild reaction conditions to afford a polymer containing phosphorous atoms in its main chain. A polyphosphonate with a high number‐average molecular weight (10,300) was obtained by the reaction of 4,4′‐BEOBP and PPDC in the presence of tetraphenylphosphonium chloride (TPPC) in o‐dichlorobenzene at 130 °C for 24 h. The structure of the resulting polymer was confirmed with IR, ¹H NMR, and ³¹P NMR spectroscopy. Furthermore, it was proved that the polyaddition of certain bis(oxetane)s with phosphonic dichlorides proceeded smoothly to give corresponding polyphosphonates with TPPC as the catalyst. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3835–3846, 2002     

Synthesis of polysulfonates containing reactive pendant chloromethyl groups by the polyaddition of bisepoxides with disulfonyl chlorides

Polysulfonates with reactive pendant chloromethyl groups were synthesized by polyadditions of bisepoxides with disulfonyl chlorides. The polyaddition of bisphenol A diglycidyl ether (BPGE) with m-benzene disulfonyl chloride (m-BDSC) occurred in anisole without any catalyst at 130°C for 24 h. However, polymer with high molecular weight was not obtained. On the other hand, the polyadditions of BPGE with m-BDSC proceeded very smoothly with high yield (81–91%) to give polymers with relatively high molecular weights in anisole at 130°C for 24 h when quaternary phosphonium salts were used as catalysts. The polyaddition was also enhanced by the addition of certain crown ether complexes. However, the catalytic activity of these compounds was less than those of quaternary phosphonium salts. Furthermore, polyadditions of certain bisepoxides with disulfonyl chlorides were also carried out to produce the corresponding polymers under the same reaction conditions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 249–256, 1998     

Synthesis and refractive‐index control of fluoropolymers by the polyaddition of bis(epoxide)s and triazine di(aryl ether)s

The polyaddition of fluorine‐containing bis(epoxide)s and fluorine‐containing triazine di(aryl ether)s were examined to give the corresponding fluorine‐containing poly(cyanurate)s. It was observed that the synthesized fluoropolymers had good thermal stabilities and good film‐forming properties. The glass transition temperatures (T_g's) and refractive‐indices (n_D's) of synthesized polymers were determined by differential scanning calorimetry and ellipsometry, respectively, and it was found that the values of T_g's and n_D's were supported by their fluorine containing ratios and skeletons. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4421–4429, 2007     

Synthesis of novel poly(hydroxyether terephthalate) via polyaddition of 2,5-difluoroterephthalic acid with aromatic bis(epoxide)s

A novel and more reliable synthetic route to 2,5-difluoroterephthalic acid was developed. A series of new poly(hydroxyether terephthalate) were prepared by the polyaddition of 2,5-difluoroterephthalic acid with various aromatic bis(epoxide)s catalyzed by tetrabutyl ammonium bromide.     

Synthesis of polyethers with unsymmetrical structures by the polyaddition of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane with diacyl chlorides

Polyethers with unsymmetrical structures in the main chains and pendant chloromethyl groups were synthesized by the polyaddition of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane (EGMO) with certain diacyl chlorides with quaternary onium salts or pyridine as catalysts. The unsymmetrical polyaddition of EGMO containing two different cyclic ether moieties such as oxirane and oxetane groups with terephthaloyl chloride proceeded smoothly in toluene at 90 °C for 6 h to give polymer 1 with a number‐average molecular weight (M_n) of 51,700 in a 93% yield when tetrabutylammonium bromide (TBAB) was used as a catalyst. The polyaddition also proceeded smoothly under the same conditions when other quaternary onium salts, such as tetrabutylammonium chloride, tetrabutylammonium iodide, tetrabutylphosphonium chloride, and tetrabutylphosphonium bromide, and pyridine were used as catalysts. However, without a catalyst no reaction occurred under the same reaction conditions. Polyadditions of EGMO with isophthaloyl chloride and adipoyl chloride gave polymer 2 (M_n = 28,700) and polymer 3 (M_n = 25,400) in 99 and 65% yields, respectively, under the same conditions. The chemical modification of the resulting polymer, polymer 1 , which contained reactive pendant chloromethyl groups, was also attempted with potassium 3‐phenyl‐2,5‐norbornadiene‐2‐carboxylate with TBAB as a phase‐transfer catalyst, and a polymer with 65 mol % pendant norbornadiene moieties was obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 368–375, 2001     

Synthesis of polyesters by the polyaddition of bis(oxetane)s with active di(ester)s

The polyaddition of bis(oxetane)s 1,4‐bis[(3‐ethyl‐3‐oxetanylmethoxymethyl)]benzene (BEOB), 4,4′‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]benzene (4,4′‐BEOBP), 1,4‐bis[(3‐ethy‐3‐oxetanyl)methoxy] ‐benzene (1,4‐BEOMB), 1,2‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]benzene (1,2‐BEOMB), 4,4‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]biphenyl (4,4′‐BEOMB), 3,3′,5,5′‐tetramethyl‐[4,4′‐bis(3‐ethyl‐3‐oxetanyl)methoxy]biphenyl (TM‐BEOBP) with active diesters di‐s‐phenylthioterephthalate (PTTP), di‐s‐phenylthioisoterephthalate (PTIP), 4,4′‐di(p‐nitrophenyl)terephthalate (NPTP), 4,4′‐di(p‐nitrophenyl)isoterephthalate (NPIP) were carried out in the presence of tetraphenylphosphonium chloride (TPPC) as a catalyst in NMP for 24 h, affording corresponding polyesters with M_n's in the range 2200–18,200 in 41–98% yields. The obtained polymers would soluble in common organic solvents and had high thermal stabilities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1528–1536, 2004     

Synthesis and characterization of fluorine‐containing polyesters by the polyaddition of bis(epoxide)s with active diesters

The synthesis and optical properties of polyesters with pendant fluorinated phenoxy groups were examined. The polyaddition of bisphenol AF diglycidyl ether ( 1 ) with fluorine‐containing terephtalates ( 2a–f ) was carried out with tetrabutylphosphonium chloride (TBPC) as the catalyst in chlorobenzene to afford the corresponding polyesters with number‐average molecular weights (M_n's) ranging from 15,200 to 30,000 in 88–96% yields. Furthermore, the polyaddition of 1 with isophthalate 2g and phthalate 2h also produced high‐molecular‐weight polyesters with M_n's = 22,700 and 22,600 in 88 and 84% yields, respectively. The linear relationship was observed between the fluorine contents and refractive indices of the obtained polyesters. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 213–222, 2003     

New polymers with mesogens in the side chain and kinked aromatic structures in the main chain from the polyaddition of bis(epoxide)s and di(ester)s

Nine polymers with kinked aromatic structures in the main chain and biphenylene‐type mesogenic groups in the side chain were synthesized by the polyaddition of bis(epoxide)s and thio‐ and O‐esters. Tetrabutylphosphonium chloride and tetraphenylphosphonium chloride effectively catalyzed the polymerization. The thermal behavior of the polymers was measured by DSC and polarizing optical microscopy. The effect of annealing time on the degree of crystallization was investigated by DSC analysis. Polymers containing 100% of the kinked aromatic groups and 1,3‐propylene glycol in the main chain were amorphous. However, when half of the main‐chain aromatic moieties were composed of kinked groups and the other half of the aromatics were linear rodlike groups, the polymers were crystalline. The incorporation of kinked groups into the main chain of side‐chain liquid‐crystalline polymers suppressed the formation of liquid crystallinity. The polymer with mesogenic aromatic structures in both the main chain and the side chain was capable of forming a liquid‐crystalline phase. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 988–998, 2000     

New poly(arylene ether)s with pendant phosphonic acid groups

Soluble brominated poly(arylene ether)s containing mono‐ or dibromotetraphenylphenylene ether and octafluorobiphenylene units were synthesized. The polymers were high molecular weight (weight‐average molecular weight = 115,100–191,300; number‐average molecular weight = 32,300–34,000) and had high glass‐transition temperatures (>279 °C) and decomposition temperatures (>472 °C). The brominated polymers were phosphonated with diethylphosphite by a palladium‐catalyzed reaction. Quantitative phosphonation was possible when 50 mol % of a catalyst based on bromine was used. The diethylphosphonated polymers were dealkylated by a reaction with bromotrimethylsilane in carbon tetrachloride followed by hydrolysis with hydrochloric acid. The polymers with pendant phosphonic acid groups were soluble in polar solvents such as dimethyl sulfoxide and gave flexible and tough films via casting from solution. The polymers were hygroscopic and swelled in water. They did not decompose at temperatures of up to 260 °C under a nitrogen atmosphere. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3770–3779, 2001     

The synthesis of novel aliphatic bis(acenaphthelene) reactive monomers

Novel aliphatic‐bridged bis(acenaphthalene)s are synthesized and evaluated as potential precursors to high‐temperature reactive monomers. It was found that as the length of the aliphatic bridging unit increased, the thermal stability of bis(acenaphthalene) increased and melting point decreased. The use of an alternative route for the introduction of the reactive vinyl group resulted in a dramatic increase in monomer purity. The increase in monomer purity resulted in the creation of a processing window that enabled samples to be melt cast prior to polymerization, greatly improving their suitability as high‐temperature polymers. Polymerized samples were found to have high thermal stability, indicating they have potential as high temperature materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43:5072–5082, 2005