Chloroform sorption in nanoporous crystalline and amorphous phases of syndiotactic polystyrene

The transport of chloroform in films of atactic polystyrene and of semicrystalline syndiotactic polystyrene in its nanoporous form (δ‐form) has been investigated by gravimetric analysis. Experimental tests have been performed at 35, 49, and 56 °C and at several vapor pressures ranging from 0.5 to 100 Torr. Nonequilibrium lattice fluid prediction of the amorphous sorption behavior was used to enucleate the sorption contribution of the crystalline nanoporous phase from semicrystalline samples. Sorption behavior of the crystalline phase has been interpreted on the basis of Langmuir equation. Moreover, the chloroform sorption at low activities in the crystalline nanoporous phase has been predicted by using Grand Canonical Monte Carlo molecular simulations. Isosteric heats of sorption were also experimentally evaluated for the crystalline phase, and compared with the corresponding prediction of molecular simulation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 8–15, 2008     

Sulfonated syndiotactic polystyrene: sorption of ionic liquid in the amorphous phase and of organic guests in the crystalline phase

Fourier Transform Infrared spectroscopy (FTIR) and Wide‐Angle X‐Ray Diffraction (WAXD) measurements have clearly established the occurrence of a dual sorption ability of sulfonated syndiotactic polystyrene samples, which exhibit the nanoporous δ crystalline phase. In fact, large uptake (up to 20–30 wt%) of ionic liquid (IL; e.g. 1‐ethyl‐3‐methylimidazolium dicyanamide) occurs only in the hydrophilic amorphous sulfonated phases and does not disturb the hydrophobic nanoporous crystalline δ phase. On the other hand, a large uptake of organic guests (e.g. naphthalene) occurs prevailingly in the nanoporous hydrophobic crystalline phase, independently of the presence of the IL in the amorphous phase, eventually leading to the formation of syndiotactic polystyrene co‐crystalline phases. The thermal stability of IL can be largely increased by their inclusion in the amorphous phase of sulfonated syndiotactic polystyrene films. Copyright © 2012 John Wiley & Sons, Ltd.     

Disordered Nanoporous Crystalline Modifications of Syndiotactic Polystyrene

Disordered crystalline modifications formed by s(2/1)2 helices of syndiotactic polystyrene (s-PS) can be prepared by the removal of bulky guest molecules from intercalate as well as from triclinic δ clathrate forms. The X-ray diffraction pattern of the disordered crystalline modification is characterized from 2θ_CuKα < 12° by only a broad diffraction peak whose maximum is located in the 2θ_CuKα range between 8.7° and 9.8°. Films presenting disordered crystalline modifications have been used for the removal of an organic pollutant from dilute aqueous solutions. The sorption behavior of the disordered crystalline modifications are compared with that of the nanoporous-crystalline δ form as well as of the dense γ form. The disordered crystalline modifications of s-PS presents pollutant (1,2-dichloroethylene) uptake comparable to those of the nanoporous δ and ε forms and much higher than those obtained for the dense γ form. Moreover, FTIR data relative to sorption of 1,2-dichloroethane show that the guest sorption occurs essentially only in the crystalline phase. As a consequence, the obtained disordered crystalline modifications of s-PS can be fully considered disordered nanoporous-crystalline modifications.     

Structure and properties of the mesophase of syndiotactic polystyrene—III. Selective sorption of the mesophase of syndiotactic polystyrene

Syndiotactic polystyrene (sPS) has various crystalline forms such as α, β, γ, and δ forms, and a mesophase depending on the preparation method. In this study, we focused on the mesophase with the molecular cavity of sPS, which is obtained by step‐wise extraction of the guest molecules from the sPS δ form. To prepare the mesophase containing different shapes and sizes of the cavity, two kinds of the sPS δ form membrane cast from either toluene or chloroform solution were first prepared and then the guest molecules were removed by a step‐wise extraction method using acetone and methanol. We could succeed in the preparation of two kinds of mesophase with different shapes and sizes of the molecular cavity. Either toluene or chloroform vapor sorption to the sPS mesophase membranes was examined at 25 °C. Sorption analysis indicates that the mesophase with large molecular cavities can mainly sorb large molecules; on the other hand, the mesophase with small cavities can sorb only the small molecules, and is unable to sorb a large amount of large molecule because the cavity was too small to sorb the large molecules. Therefore, the sPS mesophase membrane has sorption selectivity based on the size of the molecular cavity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 238–245, 2004     

Structure and properties of the mesophase of syndiotactic polystyrene. I. Effect of casting conditions on the preparation of the mesophase

A syndiotactic polystyrene–toluene solution was cast under two different casting conditions to obtain the δ form. A systematic study of its conformational transition, thermal behavior, and structural transformation as functions of the annealing temperature and time was performed. Spectroscopic studies revealed the content of its helical conformations and its retention up to 190 °C. Thermal analyses showed a significant difference in the transformation from the γ form to the α form. The retention of the intermediate emptied clathrate form (mesophase) of the conformational order for a longer duration (from 120 to 180 °C) in a syndiotactic polystyrene membrane cast at room temperature was confirmed by X‐ray diffraction analysis. On the basis of the experimental results in this work, the transition mechanism is discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 530–536, 2002; DOI 10.1002/polb.10120     

Structure and properties of the mesophase of syndiotactic polystyrene. VIII. Solvent sorption behavior of syndiotactic polystyrene/p‐chlorotoluene mesophase membranes

A crystalline δ form of a syndiotactic polystyrene (sPS) membrane was prepared from a solution of sPS (1 wt %) and p‐chlorotoluene (p‐CT) by a solution‐casting method. The mesophase (δ empty form) of sPS was obtained by the extraction of the guest solvent from the δ form of sPS by a stepwise solvent‐extraction method. The sPS/p‐CT mesophase membrane [p‐CT (A‐M)] was used for the sorption of 1 mol % p‐CT for different times and for the sorption of different concentrations of p‐CT, chlorobenzene (CB), p‐xylene (p‐X), toluene, and chloroform for 48 h. The presence of solvents in the sPS membrane was confirmed by IR analysis. A thermal study revealed that the sorption amount of 1 mol % p‐CT increased with increasing immersion time, and the sorption amounts of different solvents increased with increasing solvent concentration. Differential scanning calorimetry results showed that the desorption peak temperature increased as the amount of the solvent increased in the clathrated sPS membrane. Wide‐angle X‐ray diffraction results showed that 2θ at 8.25° was slightly shifted toward 8°, and there was no change in the peak position at 10° for p‐CT (A‐M), which was immersed in different solvents (1 mol %); however, the intensity of 2θ at 10° was not similar for all the samples. Among the solvents used for the sorption studies at 1 mol %, p‐CT (A‐M) could sorb more p‐CT and CB than p‐X, toluene, and chloroform. The solvent sorption isotherm was the Langmuir sorption mechanism. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3439–3446, 2004     

Infrared linear dichroism as a tool to evaluate volatile guest partition between amorphous and nanoporous‐crystalline polymer phases

Desorption kinetics of ethene, propene, and butadiene from films exhibiting axially oriented nanoporous‐crystalline δ phases of syndiotactic polystyrene (s‐PS) have been followed by gravimetric and infrared linear dichroism measurements. The reported data can be rationalized by assuming that, after the initial desorption mainly involving molecules absorbed in the amorphous phase, most gaseous molecules are included as guest in the nanoporous‐crystalline phase. This allows establishing a simple method to evaluate guest partition between nanoporous‐crystalline and amorphous polymeric phases, which possibly can be applied for most volatile guest molecules. The described method also allows establishing the presence of one guest molecule (ethene, propene, or butadiene) per cavity of the nanoporous δ form. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Chemical separations by nanoporous crystalline samples of syndiotactic polystyrene

Chemical separations based on absorption phenomena into syndiotactic polystyrene samples including a nanoporous crystalline phase are described. These separation phenomena are due to the presence into the crystalline phase of cavities whose size and shape have been studied through sorption experiments relative to linear hydrocarbons and through calculation procedures relative to the available crystalline structures of different polymorphic and clathrate forms of syndiotactic polystyrene.     

Structure and properties of the mesophase of syndiotactic polystyrene. II. Effect of stepwise extraction on the preparation of the mesophase

In this study, a novel stepwise extraction method has been examined. The guest molecules housed between the helices of the clathrate δ form of syndiotactic polystyrene can be removed completely with this method. A systematic study of the preparation of a solvent‐free mesophase (emptied clathrate) membrane, its helical and residual solvent contents, and its structural transformations has been performed. In this first attempt, an enhancement in the TTGG helical content has been observed in the extracted membrane, and a conceptual mechanism is proposed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 269–273, 2003     

Synthesis and characterization of high-molecular-weight syndiotactic amorphous polypropylene

Heterocycle-fused titanium indenyl silylamido dimethyl complexes produce very high molecular weight polypropylene having a prevailingly syndiotactic microstructure with syndiotactic pentad contents rrrr up to 40-55% (sam-PP). The samples are basically amorphous and may slowly develop a low level of crystallinity (16-20%) at room temperature. A structural characterization has shown that sam-PP samples crystallize in disordered modifications of the helical form I of syndiotactic polypropylene (s-PP). The stretching of compression-molded films of sam-PP samples produce oriented crystalline fibers in the trans-planar mesomorphic form of s-PP. The low stereoregularity prevents the formation of the ordered trans-planar form III of s-PP, which instead is obtained in stretched fibers of the highly stereoregular and crystalline s-PP. The trans-planar mesomorphic form, obtained in stretched fibers, in turn transforms into the helical form I upon releasing the tension. The analysis of the mechanical properties has shown that sam-PP samples show good elastic behavior in a large range of deformation with remarkable strength, due to the presence of crystallinity. A comparison with the mechanical properties of less syndiotactic and fully amorphous samples is reported. These fully amorphous samples present lower strength and experience rapid viscous flow of the chains at high deformations and/or by application of stresses for long times. The higher strength in the semicrystalline sam-PP samples makes these materials interesting thermoplastic elastomers showing high toughness and ductility.     

Crystalline orientation and molecular transport properties in nanoporous syndiotactic polystyrene films

The orientation of the crystalline δ nanoporous phase in syndiotactic polystyrene films, obtained by different procedures, have been characterized. For both solution cast and biaxially stretched films a high degree of uniplanar orientation, corresponding to the tendency of the ac crystallographic planes, to be parallel to the film plane has been observed and rationalized. According to molecular dynamics simulations of diffusion of small molecules into the δ nanoporous phase, this uniplanar orientation would minimize the molecular diffusivity through the nanoporous crystalline phase.     

Evaluation by Fourier Transform Infrared Spectroscopy of the different crystalline forms in syndiotactic polystyrene samples

Fourier transform infrared (FTIR) spectra of syndiotactic polystyrene (s-PS) semicrystalline samples have been examined by using the spectral subtraction approach. For the crystalline forms including trans-planar chains (trigonal α and orthorhombic β) a number of conformational and structural order effects, not previously described in the literature, have been identified. A method based on the results of the spectral subtraction analysis has been developed for the determination of the crystallinity degree and compared with the standard method based on the wide-angle X-ray diffraction patterns. The spectral subtraction analysis on FTIR spectra allows also an easy evaluation of the amount of α and β crystalline phases (often simultaneously present in melt-crystallized samples) although both contain chains in a same conformation. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1055–1066, 1997     

Analysis of transport behavior in polymer powders

Vapor sorption studies on powder samples of glassy polymers have provided data which supplement results obtained on conventional film specimens and aid in the elucidation of glassy-state transport mechanisms. For uniform spherical particles of sub-micron size, sorption kinetics at very low activities of organic vapors follow a simple Fickian diffusion model. The short diffusion path in such samples allows determination of the very low diffusivities characteristic of the glassy state in experiments of conveniently short duration. Deviations from the Fickian, uniform-sphere model are observed in several circumstances: Particle size non-uniformity retards the approach to diffusion equilibrium. Sorption data at substantial vapor activities show an apparently similar slow approach to equilibrium which can be related to the contribution of a relaxation-controlled mode of sorption. The effects of particle non-uniformity and of relaxation processes can be distinguished by appropriate experimental design, and models for both have been developed. Sorption rate data obtained under Fickian diffusion conditions can be used to characterize particle size distribution. Sorption kinetics on uniform-sphere powders, conversely, can be analyzed through a diffusion-plus-relaxation model to distinguish and quantify the roles of the two transport modes more clearly than is possible with polymer film specimens. Polymer powder vapor solubility isotherms show significant variations with sample history which can be interpreted in terms of free volume changes and glassy state relaxations. This discussion, based on a study of vapor sorption by poly(vinyl chloride) samples, indicates that powder sorption measurements are also likely to be of general value in the study of other glassy polymers.     

Interactions of volatile organic compounds with syndiotactic polystyrene crystalline nanocavities

The interaction of some volatile organic compounds, namely, 1,2-dichloroethane, 1,2-dibromoethane, and 1,1,2,2-tetrachloroethane, included in the δ crystalline phase of syndiotactic polystyrene (sPS) has been studied in terms of conformation, orientation, and dynamical behavior. By combination of X-ray diffraction (XRD), Fourier-transform infrared (FTIR), and solid-state (2)H NMR analyses, it has been shown that despite the differences in guest molecular properties (mass, boiling temperature, and volume), stable sPS/guest δ-clathrate cocrystals are formed since the nanoporous δ crystalline form has a flexible structure able to adapt itself to the guest molecule. As a consequence of inclusion, it has been shown that the guest diffusivity is strongly reduced and the dynamical processes are constrained, particularly when these guests are in trans conformation. This suggests the nanoporous sPS δ form to be an efficient tool for water and air purification through volatile organic compound absorption.     

Induction and measurement of glassy-state relaxations by vapor sorption techniques

Recent gravimetric studies of the sorption of organic vapors by poly(vinyl chloride) and polystyrene powders have demonstrated several features which promise to be generally useful in studying the structure and properties of the glassy state. The uptake of vapor can be significantly altered by prior thermal or vapor treatment of the polymer, apparently reflecting changes in the microvoid content or free volume of the polymer. Fickian sorption in sufficiently fine powders proceeds to equilibrium in a few minutes. Upon exposure of a polymer powder to an appreciable pressure of vapor, both a rapid Fickian sorption and a slower, relaxation-controlled sorption are observed. Superposition of these processes leads to widely varied sorption kinetics; a model comprising Fickian diffusion and first-order relaxation terms accurately describes the data and allows estimation of equilibrium and rate constants for both processes. After prolonged exposure, removal of a swelling vapor induces a slow reconsolidation of the polymer structure; this deswelling relaxation can be monitored by the decreasing amounts of vapor sorbed in repeated brief exposures to low vapor pressures, and can also be described by a first-order relaxation model. In this regard, the penetrant vapor serves as a molecular probe, monitoring glassy-state relaxation occurring in the absence of penetrant. The same, presumably true equilibrium is ultimately reached both by swelling from a low free-volume state and by consolidation from a preswollen state of high free volume. The rates of both swelling and consolidation relaxations appear to be retarded by the presence of low concentrations of vapor in the polymer, suggesting that vapor molecules may preempt some of the free volume required for relaxation.     

Sorption of Pollutant Traces by Nanoporous Crystalline Aerogels: Visualization by a Dye

Summary: The influence of the crystalline structure on the pollutant sorption properties of high porosity syndiotactic polystyrene (sPS) aerogels has been made visible by using azulene, a blue dye, capable to form a clathrate phase with sPS. The bluish coloration observed for aerogels with the nanoporous δ-form and the absence of coloration for aerogels with the densely-packed γ-form clearly establish that the crystalline nanopores play a key role for the removal of pollutant traces from water or air.     

Diffusion of oxygen and carbon dioxide in thermally crystallized syndiotactic polystyrene

The diffusion, solubility, and permeability behavior of oxygen and carbon dioxide were studied in amorphous and semicrystalline syndiotactic polystyrene (s‐PS). The crystallinity was induced in s‐PS by crystallization from the melt and cold crystallization. Crystalline s‐PS exhibited very different gas permeation behavior depending on the crystallization conditions. The behavior was attributed to the formation of different isomorphic crystalline forms in the solid‐state structure of this polymer. The β crystalline form was virtually impermeable for the transport of oxygen and carbon dioxide. In contrast, the α crystalline form was highly permeable for the transport of oxygen and carbon dioxide. High gas permeability of the α crystals was attributed to the loose crystalline structure of this crystalline form containing nanochannels oriented parallel to the polymer chain direction. A model describing the diffusion and permeability of gas molecules in the composite permeation medium, consisting of the amorphous matrix and the dispersed crystalline phase with nanochannels, was proposed. Cold crystallization of s‐PS led to the formation of a complex ordered phase and resulted in complex permeation behavior. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2519–2538, 2001     

Application of Fluorescence Depolarization Method to Monitor Free Volume in Gels of Stereoregular Polystyrene

Summary: A fluorescence depolarization technique was applied to get the information on free volume among polymer chains in gel form. Four fluorescent molecules with different molecular sizes were doped throughout the gels of syndiotactic polystyrene (sPS) and isotactic polystyrene (iPS) physical gel system, and their fluorescence anisotropy values were examined in detail for a range of polymer concentrations. Consequently, the free volume among sPS chains in sPS/chloroform gels is as large as the size of molecules smaller than 1,5-dimethylnaphthalene and is consistent with that of the cavity size in the δ-empty crystalline form of sPS solids. The cause to produce δ-empty crystalline form of sPS solids and to form cocrystals between sPS and guest molecules is discussed by comparing the molar size of guest molecules with the free volume among sPS chains in gel form.     

Use of a magnetic suspension microbalance to measure organic vapor sorption for evaluating the impact of polymer converting process

A gravimetric analyzer consisting of a magnetic suspension balance was set up to study the sorption kinetics of benzaldehyde in various forms of polypropylene (PP), including resin, sheet and thermoformed container. Instrument noise was determined throughout the experiments over a maximum of 4000 min or until equilibrium was reached. The sorption of benzaldehyde by PP resin exhibited Fickian sorption kinetics at low vapor activities (0.1–0.5). However, at high vapor activities (0.7 and 0.9), a two-stage sorption involving Fickian diffusion during the initial sorption, followed by a protracted polymer relaxation, which enhanced the sorption capacity, was observed. The converting process of PP resin into sheets and thermoformed containers had a significant impact on the benzaldehyde sorption profile. Benzaldehyde exhibited a much higher solubility in extruded sheet and thermoformed container than in the resin.     

Sorption of organic vapors by polystyrene

Activity coefficients of benzene, toluene, cyclohexane, carbon tetrachloride, chloroform, and dichloromethane in binary solutions with polystyrene at 23.5°C have been determined using a piezo-electric sorption apparatus. The investigated solvent concentration ranges were 15 to 39 wt % for benzene, 14 to 29 wt % for toluene, 15 to 28 wt % for cyclohexane, 26 to 38 wt % for carbon tetrachloride, 24 to 46 wt % for chloroform, and 21 to 41 wt % for dichloromethane. The polystyrene (weight-averaged) molecular weights were 1.1 × 10⁵ and 6.0 × 10⁵ g/gmole. The weight-fraction activity coefficients (Ω₁ = a₁/w₁) of cyclohexane, toluene, and carbon tetrachloride in polystyrene solutions determined in this work agree within experimental error with previously published values determined by measurement of vapor pressure lowering and vapor absorption by thin films. We find disagreement, at low solvent concentrations, between our results for benzene and chloroform and previously published results. We have analyzed our results using Flory's version of corresponding-states polymer solution theory. The theory can account, qualitatively, for the cyclohexane and carbon tetrachloride results. It cannot account for the toluene, benzene, dichloromethane, or chloroform results.