Poly(methylphenyl) silane: Structural properties

The physical structure of poly(methylphenyl) silane (PMPS) has been investigated using wide-angle x-ray scattering at various temperatures and optical polarizing microscopy. The results obtained by these techniques clearly show the existence of an ordered phase in PMPS. The crystallinity of our sample was estimated to be about 10% at room temperature. Below 190°C, the atactic chains pack into a monoclinic crystalline lattice of near hexagonal symmetry, with two types of disorder existing in the packing. At about 190°C, a phase transition to a liquid crystalline columnar hexagonal packing (D_ho) occurs. Finally, the sample melts into an isotropic amorphous phase. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1727–1736, 1997     

Transition temperatures and crystallinity in polyoctadecene-1

Polyoctadecene-1, as isolated from a Ziegler-type polymerization, was examined by density and refractive index measurements and by differential thermal analysis. Two main transitions were observed, their sharpness suggesting that they are both first-order. Extraction with n-hexane at 25°C. separated the polymer into two almost equal fractions, each showing essentially one of these transitions. Transition temperatures were compared with those of certain other polymers having long n-alkyl side chains. From this comparison, and from the findings of other workers, it was concluded that the polymer of lower transition temperature is atactic polyoctadecene, in which the side chains only participate in crystallization, whereas the polymer of higher transition temperature is tactic polyoctadecene, in which crystallization involves both the main chain and side chains.     

Linear polyamides from L‐malic acid and alkanediamines

A series of linear polyamides (PnMLM) derived from O‐methyl‐protected L ‐malic acid and 1,n‐alkanediamines with even n values ranging from 4 to 12 were prepared and fully characterized. L ‐Malic acid entered in the chain with a random orientation rendering essentially aregic polymers. PnMLM displayed optical rotation consistent with the content of the polymer in malic units, and they all were crystalline with melting points ranging from 158 to 188 °C and glass‐transition temperatures varying from 37 to 70 °C. PnMLM appeared to be fairly stable to heat with thermal decomposition starting close to 300 °C. Hydrolytic degradation of PnMLM at 37 °C was slow, but the process was significantly faster at 70 °C. Thermal degradation took place with the formation of cyclic malimides in the residual polymer and released the 1,n‐alkanediamine. However, hydrolytic degradation took place in a first stage with the formation of open chains of carboxylic‐ and amine‐ended oligomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1566–1575, 2004     

Observations on the thermoreversible gelation of two-directional arborols in water–methanol mixtures

Reversible gels of two-directional cascade polymers with hydrophilic groups covalently attached by an hydrophobic center chain were studied by light and small-angle X-ray scattering, differential scanning calorimetry, and freeze-fracture transmission electron microscopy. The long, self-assembled fibers interact side-by-side over extended regions to form bundles. A given fiber may participate in several bundles, thus forming a three-dimensional gel network. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2787–2793, 1997     

Dynamic light scattering studies of atactic and syndiotactic poly(methyl methacrylate)s in dilute theta solution

The present article considers the coil‐to‐globule transition behavior of atactic and syndiotactic poly(methyl methacrylates), (PMMA) in their theta solvent, n‐butyl chloride (nBuCl). Changes in Rh in these polymers with temperature in dilute theta solutions were investigated by dynamic light scattering. The hydrodynamic size of atactic PMMA (a‐PMMA‐1) in nBuCl (M_w: 2.55 × 10⁶ g/mol) decreases to 61% of that in the unperturbed state at 13.0°C. Atactic PMMA (a‐PMMA‐2) with higher molecular weight (M_w: 3.3 × 10⁶ g/mol) shows higher contraction in the same theta solvent (α_η = R_h(T)/R_h (θ) = 0.44) at a lower temperature, 7.25°C. Although syndiotactic PMMA (s‐PMMA) has lower molecular weight than that of atactic samples (M_w: 1.2 × 10⁶), a comparable chain collapse was observed (α_η = 0.63) at 9.0°C. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2253–2260, 1999     

Stereospecific polymerization of benzyl α-(alkoxymethyl) acrylates

α-(Alkoxymethyl) acrylates, such as methyl α-(phenoxymethyl) acrylate, benzyl α-(methoxymethyl)acrylate (BMMA), benzyl α-(benzyloxymethyl)acrylate, and benzyl α-(tert-butoxymethyl)acrylate, were synthesized, and their polymerizability and the stereoregularity of the polymers obtained by radical and anionic methods were investigated. The radically obtained polymers were found to be atactic by ¹³C- and ¹H-NMR analyses, but the polymers obtained with lithium reagents in toluene at −78°C were highly isotactic. Further, it is noteworthy that isotactic polymers were also produced with lithium reagents even in tetrahydrofuran. Effects of polymerization temperature and counter cation on stereoregularity were clearly observed in the polymerization of BMMA, and a potassium reagent afforded an almost atactic polymer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 721–726, 1997     

Studies on the morphology and structure of aromatic polyester films

Oriented films of an aromatic polyester containing a triad ester mesogenic group and a decamethylene flexible spacer were studied by polarized light microscopy, small-angle light scattering, and polarized infrared spectroscopy to determine the nature of the alignment of the polymer chains, induced by shearing, which is responsible for the banded or striped morphology observed. The stripes are apparently composed of fibrils arranged in a zigzag manner containing polymer chains packed in a highly ordered, parallel alignment at an angle of ±26° to the shearing direction.     

Synthesis of polyethylene oxide graft polysilylenes and networks based on poly(di‐n‐pentylsilylene/n‐pentyloct‐7‐enyl) copolymers

Poly(dipentylsilylene) copolymers containing n‐pentyl‐n‐oct‐7‐enylsilane units were prepared by reductive coupling of the corresponding dichlorosilanes. Linear high molecular weight and some crosslinked polymer were obtained. The soluble products exhibited optical and thermal properties like poly(dipentylsilylene). Differential scanning calorimetry was used to investigate crystallization and to monitor thermal crosslinking. Vinyl functionalized side chains were hydrosilylated with dipentylsilane and dimethylchlorosilane and crosslinked via the side chains. Hydrosilylation with di‐n‐pentyl(trimethylsiloxypropyl)silane led to a partial hydroxy functionalization of the polysilylene and enabled anionic PEO grafting of the poly(dipentylsilylene). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2306–2318, 2000     

Synthesis and functionalities of poly(N-vinylalkylamide). V. Control of a lower critical solution temperature of poly(N-vinylalkylamide)

N-vinyl-n-butyramide (NVBA), N-vinylisovaleramide (NVIVA), and N-vinyl-n-valeramide (NVVA), which are N-vinylalkylamides with different alkyl groups were synthesized and their solution behavior in a polymeric form was examined. Copolymers of N-vinylisobutyramide (NVIBA) with N-vinylacetamide (NVA), NVIBA with NVVA, and NVVA with NVA were prepared by the solution polymerization to control the LCSTs. The resultant polyNVBA showed a lower critical solution temperature (LCST) sharply at 32°C, but polyN-vinylisovaleramide (polyNVIVA) and polyN-vinyl-n-valeramide(polyNVVA) that have n-butyl and isobutyl groups, respectively, on their side chains were insoluble even in cold water. The water solubility of the resulting polymers was found to vary, depending on the molecular shapes as well as the side chain length of the alkyl groups in question. The copolymers consisting of NVVA, NVIBA, and NVA in water showed LCSTs sharply between 10 and 90°C, depending on changes in their comonomer content. It was found that the changes in LCST that are caused by the incorporation of comonomers are due to changes in the overall hydrophilicity of the polymer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3087–3094, 1997     

Polyesters with semifluorinated side chains: A proposal for the solid‐state structure

A proposal for the solid‐state structure of poly(p‐phenylene isophthalate) with oxydecylperfluorodecyl side chains is presented, which was calculated by the new Rietveld refinement program BGMN®. A triclinic unit cell with a = 0.575 nm, b = 4.06 nm, c = 2.1 nm, α = 91.2°, β = 85.7°, and γ = 66.1° was obtained using space group symmetry P1¯ (No. 2) with Z = 2. All fractional atom coordinates, reflections and structure factors F were determined. The results show that highly occupied netplanes lie in plane and perpendicularly to the side chains. It may be supposed that these net planes will form the low‐energy surface of the polymer. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1617–1625, 2000     

Blends of polycarbonate and acrylic polymers: Crystallization of polycarbonate

The microstructure of amorphous polymer blends has been extensively studied in the past, but now there is a growing interest for polymer blends where one or more of the components can crystallize. In this study we investigate such blends, namely miscible polycarbonate (PC)/acrylic blends. Using small angle X-ray scattering (SAXS) measurements, combined with atomic force microscopy (AFM), electron microscopy (SEM), and optical microscopy, we demonstrate that the amorphous acrylic component mostly segregates inside the spherulites between the lamellar bundles (interfibrillar segregation). Varying the PC molecular weight or the mobility of the amorphous component (by changing its molecular weight and T_g) does not change the mode of segregation. So far qualitative predictions of the mode of segregation in semicrystalline polymer blends have been proposed using the δ parameter (the ratio between the diffusion coefficient D of the amorphous component in the blend and the linear crystallization rate G), introduced by Keith and Padden. Our results suggest that other parameters have to be considered to fully understand the segregation process. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2197–2210, 1998     

A facile “graft from” method to prepare molecular‐level dispersed graphene–polymer composites

Graphene–polymer composites of positive‐charged poly(dimethyl aminoethyl acrylate), negative‐charged poly(acrylic acid), and neutral polystyrene were prepared by “graft from” methodology using reversible addition fragmentation chain transfer (RAFT) polymerization via a pyrene functional RAFT agent (PFRA) modified graphene precursor. Fluorescence spectroscopy and attenuated total reflection infrared (ATR‐IR) evidenced that the PFRA was attached on the graphene basal planes by π–π stacking interactions, which is strong enough to anti‐dissociation in the polymerization mixture up to 80°C. Atomic force microscopy (AFM) revealed that the thickness of a graphene–polymer sheet was about 4.0 nm. Graphene composites of different polymers with the same polymerization degree exhibited similar conductivity; however, when the polymer chain was designed as random copolymer the conductivity was significantly decreased. It was also observed that the longer the grafted polymer chains the lower the conductivity. ATR‐IR spectroscopy and thermogravimetric analysis were also performed to characterize the as‐prepared composites. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Layer structures. VI. Chiral sanidic polyesters derived from 2,5-bis (dodecyloxy) terephthalic acids and 4,4′-dihydroxybiphenyl

Copolycondensations of (S,S)-2,5-bis(2-methylbutyloxy) terephthaloylchloride with 2,5-bis(dodecyloxy)terephthaloylchloride and with 4,4′-bistrimethylsiloxybiphenyl yielded a series of novel chiral thermotropic copolyesters. These polyesters were characterized by elemental analyses, inherent viscosities, ¹H-NMR spectroscopy, optical rotations, optical microscopy, DSC measurements, and WAXS powder patterns recorded with synchrotron radiation under variation of the temperature. All homo- and copolyesters formed a solid sanidic layer structure with melting temperatures (T_m) ≥ 200°C. A broad enantiotropic nematic or cholesteric phase is formed above T_m with isotropization temperatures (T_is) in the range of 275–325°C. Yet, the T_m of the chiral homopolyester is so high (378°C) that the melting process is immediately followed by rapid degradation. The cholesteric phases of the copolyesters displayed unusual mobile schlieren textures, but a stable Grandjean texture was never obtained. Cholesteric domains consisting of loose bundles of more or less helical main chains are discussed as supramolecular order responsible for the observed textures and their pronounced temperature dependence. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 947–957, 1997     

Chain conformation of rod-like polymers in the melt: Small-angle neutron scattering of poly(benzoyl paraphenylene)

The chain conformation of a rigid rod polymer, poly(benzoyl paraphenylene), is determined in the melt using small-angle neutron scattering. The coherent scattering cross-section from blends of partially deuterated and hydrogenous poly(benzoyl paraphenylene) agree well with ideal rod scattering for q > 0.02 Å⁻¹, indicating that the polymer chains are highly extended. Comparison of the results to a single chain-scattering function for chains of arbitrary stiffness yield a persistence length of ca. 130 Å. Pure component scattering at the lowest scattering lengths indicate that the melt is not molecularly homogenous, but is comprised of domains, potentially reflecting localized groupings of chains with similar backbone orientation. Furthermore, this mesoscopic structure depends on the processing history of the polymer in the melt state. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2449–2459, 1998     

Cooperative motions in PVC studied by thermally stimulated currents: Comparison with A.C. dielectric derivative analysis

The thermally stimulated current–thermal sampling (TSC–TS) technique was used to study the broadened glass transition in conventional “atactic” poly(vinyl chloride), PVC. The activated parameters obtained from the TSC–TS data, mainly the apparent activation energy (E_a), characterize the breadth of glass transitions in a very sensitive way. These results are compared with those values of E_a obtained from the literature, using a recently proposed method of analyzing a.c. dielectric constants and their derivatives, over the temperature range of −100–130°C. Both techniques detect weak cooperative glass transition-like relaxations well below the main glass transition of ca. 80°C. As is the case with “atactic” PMMA, the data suggest that compositional heterogeneity related to a small fraction of predominantly isotactic sequences contribute to the broad glass transition extending ca. 60°C below the main glass transition in atactic PVC. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 913–918, 1998     

Atactic polymerization of propylene catalyzed by mono(η5-cyclopentadienyl)titanium tribenzyloxide combined with methylaluminoxane

Propylene has been polymerized with mono(η⁵-cyclopentadienyl)titanium tribenzyloxide activated with methylaluminoxane (MAO). It was found that the content of residual trimethylaluminium (TMA) in MAO has a determinative effect on the polymerization. An excess of TMA in the catalyst system reduces the Ti species to inactive lower valent states. The catalyst system gives medium molecular-weight atactic polypropylene (M_v = 2–7 × 10⁴) with narrow molecular weight distribution (M_w/M_n = 1.4–1.8). The polymer has a stereoirregular structure described by Bernoullian statistics. Statistical analysis of the regiotriad distribution of the polypropylene chains indicates a regioblock microstructure. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2051–2057, 1998     

Temperature induced structural evolution of a fluorene‐thiophene copolymer on rubbed surfaces

The thermal alignment of the liquid crystalline fluorene‐thiophene copolymer (F8T2) on rubbed polyimide surfaces is investigated by ex‐situ and in‐situ X‐ray scattering experiments. The ex‐situ characterization allows an assignment of the observed diffraction peaks to distances between polymer backbones (1.6 nm), distances between the flexible side groups of the polymer chains (0.43 nm), and intramolecular distances of adjacent ring units (0.5 nm). The in‐situ characterization allows a temperature dependent observation of the polymer chain alignment. A gradual alignment process of the polymer backbones is observed for temperatures up to 563 K. Decreasing temperature after the polymer chain alignment is accompanied by a glass transition of the side chains at 380 K. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47:1599–1604, 2009     

Syntheses and radical polymerization behavior of novel optically active methacrylamides having (L)-leucine structure in the side chains

Syntheses and radical polymerizations of methacrylamides having (L)-leucine and N-methyl-(L)-leucine methyl ester structures in the side chains N-methacryloyl-(L)-leucine methyl ester (MA-L-M) and N-methyl-N-methacryloyl-(L)-leucine methyl ester (N-Me-MA-L-M) were carried out. The monomers were prepared by the reactions of methacryloyl chloride with the corresponding amino acid methyl esters. Radical polymerizations were carried out in the presence of appropriate initiators at 60°C and 120°C. MA-L-M afforded the corresponding polymer with M_ns 38,000 ∼ 372,000 in high yields, while N-Me-MA-L-M afforded a trace amount of polymer at 60°C and in a low yield even at 120°C. Both inversion and increase of absolute value of specific rotation were observed in the transformation from MA-L-M (+1.3°C) to poly(MA-L-M) (−35.7°C). Changes in the CD spectral pattern and the conformation of the leucine moiety were confirmed from the monomer to polymer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2681–2690, 1998     

Synthesis,crystal structure and magnetic properties of a 1D coordination polymer[Ni(phth)(phen)(H2O)] n · n H2O

A new one-dimensional coordination polymer [Ni(phth)(phen)(H₂O)] _n ?·?nH₂O was synthesized. The structure was determined by X-ray crystallography revealing that each nickel atom is five-coordinate bridged via phthalate ion to form a zigzag chain. The chains are further linked together via hydrogen-bonding interactions to construct a three dimensional supramolecular network. The magnetic properties of the complex show that there are weak antiferromagnetic interactions between Ni(II) centers.