Structural changes of silk fibroin membranes induced by immersion in methanol aqueous solutions

Structural changes of native and regenerated silk fibroin membranes were induced by immersion in water-methanol solutions and examined as a function of immersion time and methanol concentration. X-ray diffractometry and infrared spectroscopy data showed that transition from random coil to β-sheet structure occurred favorably when both native and regenerated silk fibroin membranes were immersed in water-methanol solutions, regardless of the different immersion time. Only native silk membrane, treated for 2 min with pure methanol, maintained its original amorphous structure, as demonstrated by differential scanning calorimetric (DSC) curves. The degree of displacement, measured by thermomechanical analysis (TMA), was much greater for regenerated than for native silk fibroin membranes. SDS-PAGE pattern showed that native silk fibroin has a molecular weight of 350, while the regenerated sample is formed by a large number of polypeptides in the range of 200-50 KD. The amount of acidic and basic amino acids decreased slightly in regenerated silk fibroin. Physical properties of silk membranes treated with water-methanol solutions are discussed in terms of membrane structure, treatment conditions, and chemical structure of starting material. © 1994 John Wiley & Sons, Inc.     

Concentration‐dependent conformation transition of regenerated silk fibroin induced by graphene oxide nanosheets incorporation

Regenerated silk fibroin (RSF)/graphene oxide (GO) nanocomposite has been substantially investigated due to its significant multifunctional potential. Here, in combination of micromorphology, crystalline conformation, dynamic mechanical property characterization, and Fourier self‐deconvolution (FSD) quantitative analysis, we investigated the RSF molecular chains conformation transition induced by GO nanosheet incorporation, and its influence on the structural and mechanical properties of solution casted RSF/GO composite films. The GO nanosheet promoted the silk fibroin molecular chains conformation transition from random coil to β‐sheet structure, and a correlation between β‐sheet structure fraction and GO concentration was revealed. The β‐sheet structure fraction increases further improved the dynamic mechanical property of composite films. Moreover, based on nucleation‐dependent aggregation of silk fibroin molecular chains, a mechanism considering the competition effect between GO concentration and its total surface area was proposed to explain the observed concentration‐dependent conformation transition phenomenon. The study improves our understanding on silk fibroin conformation transition process in RSF/GO composite and would provide a valuable reference for the rational design of bioinspired multifunctional materials with enhanced mechanical properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1506–1515     

Gelation behavior of Antheraea pernyi silk fibroin

The sol-gel transition behavior of Antherae pernyi silk fibroin(Ap-SF) has not been systematically investigated.In this work,the influence of environmental temperature,pH,the concentration of Ap-SF,K+ and Ca2+ on the gelation time,and the structural changes of Ap-SF in sol-gel transformation were studied.The results indicated that the gelation time of the Ap-SF aqueous solution decreased with the increase of the Ap-SF concentration and environmental temperature.The sol-gel transformation of Ap-SF was much m...     

Physical and chemical properties of tussah silk fibroin films

Physical and chemical structure, as well as thermal behavior of solution-cast regenerated films, prepared from tussah (Antheraea pernyi) silk fibroin, were compared with those of solution-cast native films, in order to ascertain whether treatment (degumming, dissolution) used for preparation affected their properties. Regenerated fibroin films exhibited a higher thermal stability than native ones, as shown by differential scanning calorimetry, thermomechanical analysis, and dynamic mechanical behavior. Glass transition temperature and other relevant thermal transitions of the regenerated silk specimen shifted to higher temperatures compared with those of native specimen. Molecular conformation and crystalline structure did not show significant differences between the two kinds of silk films. Amino acid composition and molecular weight, however, distribution changed markedly after dissolving tussah silk fibroin fiber in concentrated LiSCN in polypeptide size was the main features for the regenerated silk fibroin. © 1994 John Wiley & Sons, Inc.     

Preparation and characterization of new materials based on silk fibroin,chitosan and nanohydroxyapatite

Abstract

In this paper, a series of porous nanohydroxyapatite/silk fibroin/chitosan (nHA/SF/CTS) scaffolds were successfully prepared using the freeze-drying method. The biomaterials were characterized by attenuated total reflection Fourier transform infrared spectroscopy, and mechanical testing and thermogravimetric analysis. Moreover, studies of porosity, pore size, swelling properties and in vitro degradation test were performed. Research has proved that micro-structure, porosity, water adsorption and compressive strength were greatly affected by the components’ concentration, in particular the content of silk fibroin. SEM observations showed that the scaffolds of nHA/SF/CTS are highly porous, with pore size in wide range from 25 to 300?µm which is suitable for cell growth. nHA/SF/CTS scaffolds have sufficient mechanical integrity to resist handling during implantation and in vivo loading. Both, the compressive modulus and compressive strength of the scaffold, decrease with the increase in silk fibroin content.     

Structure and molecular conformation of tussah silk fibroin films: Effect of methanol

Structural changes of tussah (Antheraea pernyi) silk fibroin films treated with different water-methanol solutions at 20°C were studied as a function of methanol concentration and immersion time. X-ray diffraction measurements showed that the α-helix structure, typical of untreated tussah films, did not change for short immersion times (2 min), regardless of methanol concentration. However, crystallization to β-sheet structure was observed following immersion of tussah films for 30 min in methanol solutions ranging from 20 to 60% (v/v). IR spectra of tussah films untreated and methanol treated for 2 min exhibited strong absorption bands at 1265, 892, and 622 cm^?1, typical of the α-helix conformation. The intensity of the bands assigned to the β-sheet conformation (1245, 965, and 698 cm^?1) increased for the sample treated with 40% methanol for 30 min. Raman spectra of tussah films with α-helix molecular conformation exhibited strong bands at 1657 (amide I), 1263 (amide III), 1106, 908, 530, and 376 cm^?1. Following α → β conformational transition, amide I and III bands shifted to 1668, and to 1241, 1230 cm^?1, respectively. The band at 1106 cm^?1 disappeared and new bands appeared at 1095 and 1073 cm^?1, whereas the intensity of the bands at 530 and 376 cm^?1 decreased significantly. ©1995 John Wiley & Sons, Inc.     

1H pulsed NMR study of bombyx mori silk fibroin: Dynamics of fibroin and of absorbed water

The dynamical behavior of the Bombyx mori silk fibroin chain and of absorbed water in silk fiber, film, and powder has been studied by ¹H pulsed nuclear magnetic resonance (NMR). Segmental motions do not occur and only the rapid rotation of the methyl groups of alanine residues is observed from ?120 to 130°C. This is independent of the conformation or form of the silk fibroin samples. Magnetization of dry silk fibroin by the solid-echo method shows a single Gaussian decay, while two components are observed in the solid-echo signals of films containing 6–10 w/w% water. An immobile component with a T₂ value of 11 μs is attributed to silk fibroin, and the mobile component to bound water. The T₂ of the latter varies from 50 to 200 μs, depending on the sample. The dynamical behavior of water trapped in the film is discussed on the basis of these T₂ values.     

Preparation and characterization of noble metal nanocolloids by silk fibroin in situ reduction

Silk fibroin (SF) is a natural protein from silkworm. It represents Chinas resplendent civili-zation as dress materials in the past 5000 a. To this day, the silk output in China is about 90000 tons per year, which is about 70% of the world overall output. In the past decade, it has been found that silk fibroin has special properties for being used as healthy foods, cosmetics, enzyme immobilizing materials, cell culture medium, biosensor, artificial skin, artificial muscle, perme-able membran…     

Microrheological studies of regenerated silk fibroin solution by video microscopy

We have carried out studies on the rheological properties of regenerated silk fibroin (RSF) solution using video microscopy. The degummed silk from the Bombyx mori silkworm was used to prepare RSF solution by dissolving it in calcium nitrate tetrahydrate‐methanol solvent. Measurements were carried out by tracking the position of an embedded micron‐sized polystyrene bead within the RSF solution through video imaging. The time dependent mean squared displacement (MSD) of the bead in solution and hence the complex shear modulus of this solution was calculated from the bead's position information. We present here the results of rheological measurements of the silk polymer network in solution over a frequency range, whose upper limit is the frame capture rate of our camera at full resolution. By examining the distribution of MSD of beads at different locations within the sample volume, we demonstrate that this probe technique enables us to detect local inhomogeneities at nanometre length scales, not detectable either by a rheometer or from diffusing wave spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2555–2562, 2007     

Nucleation of hydroxyapatite crystals by self-assembled Bombyx mori silk fibroin

Bombyx mori silk fibroin (SF) is known to be capable of facilitating nucleation of the hydroxyapatite crystals (HAps). To find out how SF mediates the nucleation of HAps, self-assembly of SF in 1.5 simulated body fluid (SBF) was observed in this study through design of a co-solution of SF and 1.5-times SBF (SF/1.5 SBF). After the co-solution of SF/1.5 SBF was incubated at 37.2 °C up to 7 days, SEM, X-ray, and Fourier transform infrared (FTIR) observations indicated that nucleation of HAps was increased. In addition, the structure of SF was transited from random coil into β-sheet indicated by FTIR spectra. The β-sheet assembly of SF in 1.5 SBF was also supported by CD spectra. Atomic force microscopy provided detailed progress of the self-assembly that SF incubated in 1.5 SBF was self-assembled in the form from dot, through rod to final net. Therefore, this study suggested that nucleation of HAps of SF was controlled by its molecular self-assembly. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Effect of beta-sheet crystals on the thermal and rheological behavior of protein-based hydrogels derived from gelatin and silk fibroin

Novel protein-based hydrogels have been prepared by blending gelatin (G) with amorphous Bombyx mori silk fibroin (SF) and subsequently promoting the formation of beta-sheet crystals in SF upon exposure to methanol or methanol/water solutions. Differential scanning calorimetry of the resultant hydrogels confirms the presence and thermoreversibility of the G helix-coil transition between ambient and body temperature at high G concentrations. At low G concentrations, this transition is shifted to higher temperatures and becomes progressively less pronounced. Complementary dynamic rheological measurements reveal solid-liquid cross-over at the G helix-coil transition temperature typically between 30 and 36 degrees C in blends prior to the formation of beta-sheet crystals. Introducing the beta-sheet conformation in SF stabilizes the hydrogel network and extends the solid-like behavior of the hydrogels to elevated temperatures beyond body temperature with as little as 10 wt.-% SF. The temperature-dependent elastic modulus across the G helix-coil transition is reversible, indicating that the conformational change in G can be used in stabilized G/SF hydrogels to induce thermally triggered encapsulant release.     

Atomic force microscopy: Bombyx mori silk fibroin molecules and their higher order structure

We performed atomic force microscopy measurements on fibroin molecules from the domestic silkworm, Bombyx mori. At low concentrations, we could observe single protein molecules. The shape of the observed molecules is a rod with long smaller chains extending from the ends. The size of the rod is 60 nm in length and 15 nm in width. At high concentrations, we observed long threadlike aggregates of fibroin molecules, their chains entangled with one another. These results provide insight into the microscopic mechanism of silk‐fiber formation. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1436–1439, 2000     

Physical characteristics and properties of waterborne polyurethane materials reinforced with silk fibroin powder

Degummed silk filament was pulverized with a home‐made machine to obtain silk fibroin (SF) powder, and the structure, morphology, and particle size of the SF powder were investigated. The individual spherical particles and aggregates with different morphology of silk fibroin coexisted in water. A waterborne polyurethane (WPU) aqueous dispersion was blended with the SF powder to prepare novel blended materials with improved physical properties. The average particle size and zeta potential of the WPU/SF aqueous dispersions were characterized. The result showed that the WPU/SF dispersion with higher SF content exhibited a less negative zeta potential and a larger average particle size. Furthermore, the effect of SF content on the morphology, miscibility, and mechanical properties of the resulting blended films was studied by scanning electron microscopy, wide‐angle X‐ray diffraction, dynamic mechanical thermal analysis, and tensile testing. The films showed an improved Young's modulus and tensile strength from 0.3 to 33.8 MPa, and 0.6 to 5.2 MPa, respectively, with the increasing of SF up to a content of 26 wt %. The negative charges in the periphery and the small particle size made a good effort on dispersing SF powder into the WPU matrix as small aggregates, and the SF powder led to the efficient strengthening of WPU materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 940–950, 2010     

Porous 3‐D scaffolds from regenerated Antheraea pernyi silk fibroin

In this study, porous three‐dimensional (3‐D) materials were prepared with the regenerated Antheraea pernyi (A. pernyi) silk fibroin by freeze‐drying from a lithium thiocyanate solution of its fibers. The relationship between preparation conditions and morphological structures of 3‐D materials was also studied. We concluded that with the decrease in A. pernyi silk fibroin solution concentration and the increase in the freezing temperature, the porosity and the average pore diameter of the 3‐D materials were increased while the pore density was decreased. By adjusting the freezing temperature and the silk fibroin solution concentration, the 3‐D materials having the average pore diameter of 75–260 µm and the porosity of 70–90% can efficiently be produced. As a kind of new material with excellent biocompatibility and bioactivity, the material is expected to be applied to tissue regeneration scaffolds. Copyright © 2007 John Wiley & Sons, Ltd.     

Thermal properties and phase transitions in blends of Nylon-6 with silk fibroin

The thermal and structural properties of binary blends of Nylon-6 (N6) and a chemically related biopolymer, Bombyx mori silk fibroin (SF), are reported in this work. Homopolymers and blends, in composition ratios of N6/SF ranging from 95/05 to 70/30, were investigated by thermogravimetric (TG) analysis, differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy and wide angle X-ray scattering (WAXS). Silk fibroin typically degrades at temperatures just above 210°C, which occurs within the melting endotherm of N6. In TG studies, the measured mass remaining was slightly greater than expected, indicating the blends had improved thermal stability. No beta sheet crystals of SF were detected by FTIR analysis of the Amide I region. Strong interaction between N6 and SF chains was observed, possibly as a result of formation of hydrogen bonds between N6 and SF chains. DSC analysis showed that the addition of SF to N6 caused a decrease in the crystallization temperature, the melting temperature of the lowest melting crystals and the crystallinity of N6. Furthermore, the α-crystallographic phase dominates and the γ-crystallographic phase was not observed in N6/SF blends, in contrast to the homopolymer N6, which contains both phases. We suggest that the addition of SF might result in changes of the chain extension of N6, which lead to the appearance of α-rather than γ-phase crystals.     

Regenerated silk fibroin nanofibers: water vapor-induced structural changes and their effects on the behavior of normal human cells

Nanofibrous non-woven matrices were prepared by electrospinning a regenerated silk fibroin (SF) solution, and the structural changes of SF nanofibers treated with water vapor were investigated using time-resolved IR and (13)C CP/MAS NMR spectroscopy. Conformational transitions of SF from random coil to beta-sheet structures were induced by water vapor treatment and were strongly dependent on the treatment time and temperature. Water vapor treatment provided a useful means of stabilizing the SF nanofiber matrices, resulting in the formation of matrices with a decreased solubility in water and increased mechanical strength. The adhesion and spreading of both normal human keratinocytes and fibroblasts onto the SF nanofiber matrices were also investigated, and the water vapor-treated SF nanofiber matrices showed good cellular compatibility, in comparison with traditional methanol-treated ones. This approach to controlling the conformational changes of SF nanofibers by water vapor treatment may be useful in the design and tailoring of novel materials for biomedical applications, including wound dressings and scaffolds for tissue engineering.     

Miscibility and biodegradability of silk fibroin/carboxymethyl chitin blend films

Blend films of silk fibroin and carboxymethyl chitin were prepared by solution casting using water as a cosolvent. The blend films were subjected to post-treatment with an aqueous methanol solution to induce beta-sheet formation of silk fibroin. The miscibility of the blend films both before and after methanol treatments was investigated in terms of chemical interactions, morphologies, thermal properties, and crystal structures by using FTIR spectroscopy, SEM, DSC, and XRD. The results indicate that the blend between silk fibroin and CM-chitin was semi-miscible because only the amorphous parts of the polymers were compatible with each other. The enzymatic degradation showed that the incorporation of CM-chitin enhanced biodegradability and swelling ability of silk fibroin.     

Surface properties of silk fibroin films and their interaction with fibroblasts

There is a growing interest in the use of silk as a biomaterial for tissue engineering. Silk threads from Bombyx mori have a fibrous core of fibroin, the protein responsible for biocompatibility and bioactivity, which is surrounded by a family of "gummy" proteins, called sericins, which are almost completely removed during silk degumming. Three different methanol treatments on regenerated fibroin films were used to convert viscous solutions of Silk I to an insoluble crystalline form (Silk II), in an attempt to devise new processing protocols for the creation of a cell guiding fibroin surface. Human fibroblasts (MRC5 line) were used as probes of the cell-biomaterial interaction in the early stages of the process (1 h, 3 h, 6 h and 4 d after seeding). The effect of each treatment on cell adhesion, spreading and distribution was monitored by scanning electron microscopy (SEM) and was correlated to superficial properties (like roughness and crystallinity) and fibroin conformation by means of atomic force microscopy (AFM), used in both topographical and acoustic mode, and attenuated total internal reflection infrared spectroscopy (FTIR-ATR). It was found that traditional methanol treatments where fibroin films were soaked in methanol solution produced roughness patterns that affected only the very early stages of fibroblast adhesion (until 3 h from seeding), while the new treatment proposed could really dialogue with the cells. Its non-homogeneous surface can explain the existence of cells spreading in specific directions and the presence of cell repellent areas even 4 d after seeding.     

Non-bioengineered silk fibroin protein 3D scaffolds for potential biotechnological and tissue engineering applications

This paper describes a new source for fabricating high-strength, non-bioengineered silk gland fibroin 3D scaffolds from Indian tropical tasar silkworm, Antheraea mylitta using SDS for dissolution. The scaffolds were fabricated by freeze drying at different prefreezing temperatures for pore size and porosity optimization. Superior mechanical properties with compressive strength in the range of 972 kPa were observed. The matrices were degraded by proteases within 28 d of incubation. Biocompatibility was assessed by feline fibroblast culture in vitro and confocal microscopy further confirmed adherence, spreading, and proliferation of primary dermal fibroblasts. Results indicate nonmulberry 3D silk gland fibroin protein as an inexpensive, high-strength, slow biodegradable, biocompatible, and alternative natural biomaterial. [Figure: see text].     

丝素膜修饰电极pH电荷选择效应的研究

研究了丝素膜的带电特性,其等电点在pH4.5附近,利用丝系膜在等电点前后的两性荷电特性和电荷之间的静电作用,研制了丝素膜修饰石墨电极,多巴胺在膜中的表观扩散系数为2.65×10^-7cm^2/s,其电极反应异相电子转移速率常数为8.9×10^-6cm/s,电极用于神经递质类化合物体系的测定中,验证了此修饰电极的pH电荷选择效应。