Polymerization of N-carbazolylacetylene by various transition metal catalysts and polymer properties

N-Carbazolylacetylene (CzA) was polymerized in the presence of various transition metal catalysts including WCl₆, MoCl₅, [Rh(NBD)Cl]₂, and Fe(acac)₃ to give polymers in good yields. The polymers produced with W catalysts were dark purple solids and soluble in organic solvents such as toluene, chloroform, etc. The highest weight-average molecular weight of poly(CzA) reached about 4 × 10⁴. In the UV–visible spectrum in CHCl₃, poly(CzA) exhibited an absorption maximum around 550 nm (ε_max = 4.0 × 10³ M⁻¹ cm⁻¹) and the cutoff wavelength was 740 nm, showing a large red shift compared with that of poly(phenylacetylene) [poly(PA)]. Poly(CzA) began to lose weight in TGA under air at 310°C, being thermally more stable than poly(PA) and poly[3-(N-carbazolyl)-1-propyne]. Poly(CzA) showed a third-order susceptibility of 18 × 10⁻¹² esu, which was 2 orders larger than that of poly(PA). © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2489–2492, 1998     

Polymerization of propargylamine and 1,1-diethylpropargylamine by transition metal catalysts

Some polyacetylene derivatives containing an amine functional group were prepared by the polymerization of propargylamine (PA) and 1,1-diethylpropargylamine (DEPA) with various transition metal catalysts. In the polymerization of PA, Mo-based catalysts were more effective than that of W-based catalysts, and organoaluminum compounds, especially EtAlCl₂, were found to be very effective cocatalysts. In the polymerization of DEPA, Mo-and W-based catalyst systems showed a similar catalytic activity. The polymerization easily proceeded in polar solvents such as nitrobenzene and DMF as well as nonpolar aromatic solvents such as chlorobenzene, toluene, etc. The resulting poly(PA) and poly(DEPA) were insoluble in organic solvents regardless of polymerization catalysts but the polymers were found to be stable to air oxidation. Thermogravimetric analyses and thermal transitions of poly(PA) and poly(DEPA) were also studied. © 1992 John Wiley & Sons, Inc.     

Advances in late transition metal catalysts for olefin polymerization/oligomerizarion

In this review article, we have consolidated our recent studies on late transition metal catalysts (mainly Fe, Co) for olefin polymerization/oligomerization. A series of bisiminopyridyl Co(II) and Fe(II) complexes were synthesized. These catalysts when activated with MAO in aromatic or aliphatic hydrocarbon solvents, oligomerize or polymerize ethylene to α-olefins or high molecular weight polymers with exceptionally high activities and selectivities. The electronic and steric effects of allyloxy and benzyloxy substituted bisiminopyridyl Fe(II) and Co(II) complexes were also investigated. The influence of catalyst structure and temperature on the polymerization activity, thermal properties and molecular weight were discussed. The effects of heterogenization of these catalysts on silica and modified SBA-15 were analyzed. The polymerization of polar monomers such as vinyl ethers and methyl methacrylate was tested and no specific trends in activity and polymer molecular weight with changes in steric bulkiness around the metal center were observed with the same catalyst system.     

过渡金属掺杂亚铁锌双金属氰化物催化合成生物柴油的研究

研究了掺杂过渡金属盐(La、Ce、Zr、Mn)对亚铁锌双金属氰化物(DMC)固体酸催化剂合成生物柴油的影响,并采用XRD、FT-IR、ICP、BET等方法对其进行结构和性能表征。结果表明,1%的镧、铈、锆、锰金属盐对催化剂的活性都有提高,其中,添加1%镧的DMC催化剂活性最高,在醇油摩尔比16∶1,反应温度160 ℃,催化剂加入量2%条件下,反应7 h,脂肪酸甲酯收率达到99.3%。过渡金属盐引入对催化剂的组成没有影响,但使得催化剂更加分散,颗粒粒径更小,比表面积变大,有利于催化剂和反应物的接触,从而提高了催化剂活性。     

Polymerization of phenylacetylene by iridium catalysts

Polymerization of phenylacetylene (PA) with [(cod)IrCl]₂‐based catalysts (cod: 1,5‐cyclooctadiene) was examined. The [(cod)IrCl]₂/n‐BuLi and [(cod)IrCl]₂/Ph₂C?C(Ph)Li systems induced the polymerization of PA to produce polymers with a number‐average molecular weight (M_n) of around several thousand in rather low yields. On the other hand, the catalyst composed of [(cod)IrCl]₂, norbornadiene (nbd), Ph₃P, and Ph₂C?C(Ph)Li (molar ratio of 1:1:1.1:2) produced polymer in a high yield (ca. 80%) in toluene at 0 °C. The resulting polymer showed a bimodal gel permeation chromatographic profile (M_n = 209,000 and 4300; ratio: 81/19). On the basis of these findings, the presence of two active species, that is, Ir complexes with nbd and cod, are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1075–1080, 2002     

Polymerization of substituted acetylenes by various rhodium catalysts: Comparison of catalyst activity and effect of additives

This research deals with comparison of the activity of various Rh catalysts in the polymerization of monosubstituted acetylenes and the effect of various amines used in conjunction with [Rh(nbd)Cl]₂ in the polymerization of phenylacetylene. A zwitterionic Rh complex, Rh⁺(nbd)[(η⁶‐C₆H₅)B^?(C₆H₅)₃] ( 3 ), was able to polymerize phenylacetylene ( 5a ), t‐butylacetylene ( 5b ), N‐propargylhexanamide ( 5c ) and n‐hexyl propiolate ( 5d ), and displayed higher activity than the other catalysts examined, that is [Rh(nbd)Cl]₂ ( 1 ), [Rh(cod)(O‐o‐cresol)]₂ ( 2 ), and Rh‐vinyl complex ( 4 ). Monomers 5a and 5c polymerized virtually quantitatively or in fair yields with all these catalysts, while monomer 5b was polymerizable only with catalyts 3 and 4 . Monomer 5d did not polymerize in high yields with these Rh complexes. The catalytic activity tended to decrease in the order of 3 > 4 > 2 > 1 . Although polymerization of 5a did not proceed at all in toluene with [Rh(nbd)Cl]₂ alone, it smoothly polymerized in the presence of various amines as cocatalysts. The polymerization rate as well as the molecular weight of polymer depended on the basicity and steric bulkiness of amines. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4530–4536, 2005     

第一过渡系列金属元素单核水氧化催化剂的最新进展

水的氧化是光合作用的重要步骤,其提供用于二氧化碳固定的电子和质子,以及生物圈所必需的氧气.在将太阳能转换为化学能的人工光合作用中,设计合成高效稳定的水氧化催化剂是研究的关键.目前的催化体系主要是基于钌和铱等贵金属的金属氧化物纳米颗粒和多核金属配合物.基于钌和铱的单核催化体系近年来也得到了广泛的发展.最近几年,第一过渡系列金属元素单核水氧化催化剂快速得到重视.作为配合物中心原子,它们不仅具有丰富的氧化态,而且因相对充足的蕴藏和较低的开采冶炼成本,其具有钌和铱等贵金属不可比拟的重大优势和广阔的应用前景.本文总结了近几年第一过渡系列金属元素单核水氧化催化剂的进展,并在此基础上,简单讨论了氧—氧键的生成,为进一步设计新颖、具有高催化效率和高稳定性的单核水氧化催化剂提供了理论依据.     

Polymerization of 1-ethynylcyclohexene by tungsten and molybdenum-based catalysts

1-Ethynylcyclohexene, an acetylene derivative having cyclohexenyl substituent, was polymerized by various W- and Mo-based catalysts. WCl₆-EtAlCl₂ catalyst system was found to be very effective for this polymerization. The effects of the monomer-to-catalyst mol ratio, the initial monomer concentration, the temperature, and the cocatalysts for the polymerization of 1-ethynylcyclohexene by WCl₆ were investigated. The catalytic activity of Mo-based catalysts was found to be similar to that of W-based catalysts. The polymer structure was identified to have a conjugated polymer backbone carrying a cyclohexenyl substituent. The resulting polymers were light-brown powder and completely soluble in aromatic and halogenated hydrocarbon solvents such as chlorobenzene, benzene, chloroform, carbon tetrachloride, etc. Studies of the thermal properties and morphology of poly(1-ethynylcyclohexene) were also carried out. © 1995 John Wiley & Sons, Inc.     

Polymerization of acenaphthylene by transition metal catalysts

The polymerization of acenaphthylene (ACN) was examined in the presence of the group V and VI transition metal salts such as WCl₆, MoCl₅, TaCl₅, and NbCl₅, as catalysts under various reaction conditions. These transition metal salts were found to be effective catalysts for the polymerization of ACN. The polymerization of ACN by WCl₆ in chlorobenzene proceeded at a high initial rate when the monomer to catalyst mole ratio was 200. In addition, it was observed that aromatic solvents generally were found to be superior to aliphatic solvents for both conversion and molecular weight. The structure of the resulting polymers was characterized by means of NMR, IR, UV, and x-ray diffraction. Emission properties were also investigated. Fluorescence emission spectra of the polymers obtained by WCl₆ as a catalyst varied strongly depending on the polymerization solvent. Thus, it appears that the polyacenaphthylene produced by WCl₆ was a different configuration dependent on the polymerization solvents used.     

有序多孔过渡金属氧化物及其负载贵金属催化剂对挥发性有机物氧化的催化性能

大部分的挥发性有机物(VOCs)污染环境,危害人身健康.目前,我国虽然已开展了治理 VOCs污染的工作,但还缺乏有效的、拥有自主知识产权的 VOCs治理技术,因此研发新型高效 VOCs处理技术迫在眉睫.催化氧化法是公认的最有效消除 VOCs的途径之一,而高性能催化剂的研发是实现该过程的关键.近年来,人们围绕消除 VOCs的高效且价廉的催化剂的研发开展了卓有成效的工作,许多过渡金属氧化物、混合或复合金属氧化物及其负载贵金属催化剂均被认为是有效的催化氧化材料.与体相材料相比,多孔材料具有发达的孔道结构和高的比表面积,一方面有利于反应物的扩散、吸附和脱附,因而具有更高的催化活性和选择性;另一方面有利于活性组分(如贵金属等)在多孔材料表面的高分散,抑制活性组分的烧结,因而具有更好的催化稳定性.本文简述了近年来多孔金属氧化物在环境污染物消除领域的研究进展,阐述了以有序介孔或大孔过渡金属氧化物、钙钛矿型氧化物和负载贵金属催化剂的制备及其对典型 VOCs(如苯系物、醇类、醛类及酮类等)氧化的催化性能,重点介绍了四类催化材料,包括有序介孔过渡金属氧化物或复合氧化物(Co3O4, MnO2, Fe2O3, Cr2O3和 LaFeO3等)催化剂,有序介孔金属氧化物负载贵金属(Au/Co3O4, Au/MnO2和 Pd/Co3O4等)催化剂,三维有序大孔过渡金属氧化物或复合氧化物(Fe2O3, LaMnO3, La0.6Sr0.4MnO3和 La2CuO4等)催化剂,以及三维有序大孔金属氧化物负载贵金属(Au/Co3O4, Au/LaCoO3, Au/La0.6Sr0.4MnO3和 AuPd/Co3O4等)催化剂的制备及其物化性质与对苯、甲苯、二甲苯、乙醇、丙酮、甲醛、甲烷或氯甲烷等 VOCs氧化的催化性能之间的相关性.借助二氧化硅或聚甲基丙烯酸甲酯微球等硬模板,采用纳米浇铸法可制备出二维或三维的有序单一或多级孔道结构的金属氧化物.研究表明,多孔金属氧化物的催化性能远优于其体相甚至纳米催化剂的.有序多孔材料的优异催化性能与其拥有大的比表面积、高的吸附氧物种浓度、优良的低温还原性、独特的孔道结构、活性组分的高分散以及贵金属与氧化物载体之间的强相互作用等有关.探明影响催化剂活性的因素有利于从原子水平上认识催化过程,为新型高效催化剂的设计与制备奠定基础.本文还指出了此类研究中存在的一些问题,例如利用硬模板法制备多孔材料的缺点是目标催化剂的收率低,硬模板浪费严重,大规模制备多孔催化剂势必增加制备成本,这些问题有待于妥善解决.与此同时,还展望了 VOCs消除技术的未来发展趋势,采用多种技术联用的方法有望最大程度地提高 VOCs的消除效率.     

新一代高活性后过渡金属烯烃聚合催化剂

介绍了近几年发展起来的新一代后期过渡金属(Fe,Co,Ni,Pd)烯烃聚合催化剂,对催化剂的结构、性能及催化烯烃聚合进行了阐述。     

Polymerization of 1-aryl-2-trimethylsilylacetylenes by transition metal catalysts(II)

Polymerization of 1-aryl-2-trimethylsilylacetylene (aryl = thienyl, furyl, and pyridyl) was carried out by transition metal catalysts. The polymer yield was generally low due to the steric hindrance. R₄Sn (R = Me, n-Bu, Ph) exhibits some cocatalytic activities with respect to polymer yield and molecular weight. On the other hand, the polymerization was decelerated when organoaluminum compounds were used as cocatalysts. The polymer yield increased in the following order: phenyl > thienyl > furyl > pyridyl, according to the aryl substituents. The NMR (¹H- and ¹³C-), IR, and UV-visible spectra indicated that the resulting polymers have a linear conjugated polyene structure each containing the aromatic substituent and trimethylsilyl group. From ¹H-NMR integration, it was found that the resulting polymers are partially desilylated depending on the substituents of monomer and the polymerization conditions. The solubility behavior, stability and fluoride-ion induced desilylation reaction of the polymers were also studied.     

Ring-opening of 1,2,3,4-tetramethyl-1,2,3,4-tetraphenylcyclotetrasilane in the presence of transition metal catalysts

Ring opening of 1,2,3,4-tetramethyl-1,2,3,4-tetraphenylcyclotetrasilane in the presence of various transition metal catalysts has been studied. Pd and Pt compounds are most active. Compounds with bulky ligands [e.g., Pd(PPh₃)₄] lead to the formation of “dimeric” cyclooctasilanes. Compounds with less bulky groups convert monomer to dimers and mixture of oligomers and polymers. Reactions with the all-trans monomer, tttt-(MePhSi)₄, result in the formation of stereoregular dimer, presumably all-trans, tttttttt-(MePhSi)₈, in high yields. Reactions in the presence of oxygen lead to the formation of polymers with inserted oxygen atoms in the main chain. © 1996 John Wiley & Sons, Inc.     

异羟肟酸过渡金属配合物对对氯甲苯催化氧化性能的研究

考察了N-羟基-N-苯基苯甲酰胺的钴、锰和铜配合物在对氯甲苯液相氧化生成对氯苯甲酸反应中的催化性能.考察了反应温度、催化剂浓度、中心金属离子、以及助催化剂对催化氧化反应的影响,发现以钴配合物为催化剂,反应温度为140℃,催化剂浓度为1.0 × 10-3 mol·L-1为最佳反应条件.添加NaBr和四甘醇能促进对氯甲苯的...     

α-二亚胺镍(Ⅱ)催化甲基丙烯酸甲酯聚合

以4种不同结构的α-二亚胺镍(Ⅱ)催化剂[(t-Bu)—N CH—CH N—(t-Bu)]NiBr₂(C1), [C₆H₅—N C(Me)—C(Me) N—C₆H₅]NiBr₂(C2), [(2,6-C₆H₃(Me)₂)—N C(Me)—C·(Me) N—(2,6-C₆H₃(Me)₂)]NiBr₂(C3)和[(2,6-C₆H₃(i-Pr)₂)—N C(An)—C(An) N—(2,6-C₆H₃(i-Pr)₂)]NiBr₂(An=acenaphthyl)(C4), 在甲基铝氧烷(MAO)作用下, 对甲基丙烯酸甲酯(MMA)进行催化聚合. 以C2为模型催化剂系统研究了Al/Ni摩尔比、 单体浓度、 聚合温度、 聚合时间和反应溶剂对催化活性及聚合物分子量的影响. 在较适合的聚合条件(催化剂用量为1.6 μmol, Al/Ni摩尔比为800, MMA浓度为2.9 mol/L, 甲苯为溶剂, 聚合温度为 60 ℃, 聚合时间为4 h)下, 讨论了催化剂结构对催化活性和聚合物分子量的影响. 研究发现, 催化剂C1~C3催化MMA聚合均得到富含间规结构的聚甲基丙烯酸甲酯(PMMA). 催化剂结构中空间位阻增大导致催化活性降低, 空间位阻最小的 C1催化活性最高[达107.8 kg/(mol Ni·h)]; 而空间位阻最大的C4催化活性仅为7.8 kg/(mol Ni·h). 催化剂结构中给电子效应增加有利于催化活性及聚合物分子量的增加. C2催化活性为62.5 kg/(mol Ni·h), 所得聚合物的分子量为5.0×10⁴; 而具有较强给电子效应的C3催化活性达到96.9 kg/(mol Ni·h), 并得到更高分子量的聚合物(7.6×10⁴).     

过渡金属氧化物和金属负载型沸石催化剂上合成 纳米碳管及其表征

采用气相催化沉积法催化合成纳米碳管,比较了不同金属氧化物和金属负载型沸石催化剂以及不同分子筛载体对合成纳米碳管的影响,并用TEM,XRD表征其形貌和结晶度,用DTA-TG考察了纳米碳管的热和稳定性。实验结果表明纳米碳管的形成除了与金属种类有关外,还直接与催化剂的颗粒大小和分散状态有关。粒径在20nm左右的不规则形状的纳米粒子是形成纳米碳管的活性组分,非负载和负载型的催化剂均表明活性组分的粒径与纳米碳管的管径有一定的对应关系。化学提纯后能得到高纯度的纳米碳管;其管壁具有较好的石墨化结构,在空气中的热稳定性大于400℃,而在氮气中能维持到1200℃以上。     

Modification of polymethylhydrosiloxane by dehydrocoupling reactions catalyzed by transition metal complexes: Evidence for the preservation of linear siloxane structures

Polysiloxanes with pendant poly(ethylene oxide) side chains (4 were prepared by the dehydrocoupling reaction of poly(methylhydrosiloxane) (PMHS, 3 with 2-(2-(2-(2-(2-methoxyethoxy)ethoxy)ethoxy)ethoxy)ethanol (1 and poly(ethylene glycol) methyl ether (2 using a metal catalyst. Catalysts investigated were tin(II) 2-ethylhexanoate, Rh(Ph₃P)₃Cl, and Pd₂(dba)₃. The reaction of a cyclic siloxane, D₄^H, with 1 catalyzed by Pd₂(dba)₃ was also carried out to synthesize siloxane 6. The polysiloxanes were characterized by ¹H NMR, ²⁹Si NMR, FT-IR, and GPC. ²⁹Si NMR study of these comb-like polysiloxanes revealed that there is a significant difference in the structure of the siloxane polymers prepared depending upon the catalyst. M, D, and T units were observed when tin(II) was used as a catalyst, but only M and D units were detected when Rh(Ph₃P)₃Cl or Pd₂(dba)₃ was employed. Furthermore, M and T units are negligible for the cyclic siloxane 3 using Pd₂(dba)₃. A mechanism is proposed to account for these observations.     

过渡金属促进的固相偶联反应

固相有机合成作为组合化学的基石近几年发展很快,本文就1994～1999年被过渡金属促进的固相偶联反应进行了综述。