Synthesis of poly(aryl ether) dendrimers using an aryl carbonate and mixtures of metal carbonates and metal hydroxides

Four generations of poly(aryl ether) dendrimers containing aryl sulfide or aryl sulfone groups, and aryl fluoride terminal functionality, have been synthesized using the divergent initiator core method and bis(4-fluorophenyl) sulfone as the core precursor. The strategy is based on the divergent approach and an activation/condensation sequence that involves oxidation of the aryl sulfide group and the displacement of the activated halide moiety by a phenolate ion. The phenolate is easily generated in situ from an aryl carbonate. No reaction intermediates were detected when the condensation reaction was carried out utilizing a very active metal carbonate, such as cesium carbonate, in conjunction with magnesium hydroxide or calcium carbonate which removes some of the fluoride ions formed. The samples were characterized by HPLC, MALDI-TOF-MS, NMR, and SEC. Imperfections in some of the molecules of the dendrimers, formed by reaction of the core precusors with an impurity present in the phenol, were also identified by MALDI-TOF-MS. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1781–1798, 1997     

Synthesis and characterization of new hyperbranched poly(aryl ether oxadiazole)s

A new AB₂ monomer was synthesized for use in the preparation of a hyperbranched poly(aryl ether oxadiazole) with terminal phenol functionality. The AB₂ monomer contains two phenolic groups and a single aryl fluoride group that is activated toward nucleophilic displacement by the attached oxadiazole ring. The nucleophilic substitution of the fluoride with the phenolate groups led to the formation of an ether linkage. Subsequently, a hyperbranched poly(aryl ether oxadiazole) having approximately a 44% degree of branching, as determined by a combination of model compound studies and ¹H NMR, was obtained. The terminal phenolic groups underwent facile functionalization, furnishing hyperbranched polymers with a variety of functional chain ends. The nature of the chain‐end groups had a significant influence on the physical properties of the polymers, such as the glass‐transition temperature and their solubility. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3851–3860, 2001     

Hyperbranched aryl polycarbonates derived from A2B monomers versus AB2 monomers

Hyperbranched aryl polycarbonates were prepared via the polymerizations of A₂B and AB₂ monomers, which involved the condensation of chloroformate (A) functionalities with tert‐butyldimethylsilyl‐protected phenols (B), facilitated by reactions with silver fluoride. The polymerization of the A₂B monomer gave hyperbranched polycarbonates bearing fluoroformate chain ends, which were hydrolyzed to phenolic chain‐end moieties and further elaborated to tert‐butyldimethylsilyl ether groups. The polymerization of the AB₂ monomer gave tert‐butyldimethylsilyl ether‐terminated hyperbranched polycarbonates. The polymerizations were conducted at 23–70 °C in 20% acetonitrile/tetrahydrofuran in the presence of a stoichiometric excess of silver fluoride for 20–40 h to afford hyperbranched polycarbonates with weight‐average molecular weights exceeding 100,000 Da and polydispersity indices of typically 2–3. The degrees of branching were determined by a reductive degradation procedure followed by high‐performance liquid chromatography. Alternatively, the degrees of branching were measurable by solution‐state ¹H NMR analyses and agreed with the statistical 50% branching expected for the polymerization of A₂B and AB₂ monomers not experiencing constructive or destructive electronic effects on the reactivity of the multiple functional groups. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 823–835, 2002; DOI 10.1002/pola.10167     

Synthesis and properties of hyperbranched poly(ether sulfone)s prepared by self‐polycondensation of novel AB2 monomer

Hyperbranched poly(ether sulfone)s were prepared by the self‐polycondensation of the novel AB₂ monomer, 4‐(3,5‐hydroxyphenoxy)‐4′‐fluorodiphenylsulfone. The high‐molecular‐weight polymers were isolated in good yields. The degree of branching (DB) of the resulting polymers was investigated by the preparation of dendritic and linear model compounds. The DB determined by gated decoupling ¹³C NMR measurements was in the range 0.17–0.41 and was dependent on the base used for the self‐polycondensation. It was found that cesium fluoride was an effective base to form the polymer having the DB of 0.41. The resulting hyperbranched poly(ether sulfone)s showed good solubility in organic solvents. The solubility and the glass transition temperature of the polymers were influenced by the terminal functional groups. The unique thermal crosslinking phenomenon was observed during the DSC measurements of the hydroxyl‐terminated hyperbranched poly(ether sulfone) under air condition. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Hyperbranched Polyfluorinated benzyl ether polymers: Mechanism,kinetics, and optimization

Highly fluorinated, hyperbranched polymers were synthesized from the polycondensation of AB₂ monomers, 3,5‐bis[(pentafluorobenzyl)oxy]benzyl alcohol and 3,5‐bis[(pentafluorobenzyl)‐oxy]phenol with potassium carbonate base, and 18‐crown‐6 phase transfer agent in a variety of polar aprotic solvents. The regioselectivity of the polymerization was optimized and was found to be temperature dependent. The new polymerization technique produced higher molecular weight polymer using safer conditions than earlier methods. The resulting optimization was used to control substitution of oxygen‐bearing nucleophiles along nonactivated fluoroaryl systems in high yield. Water was found to induce side reactions that generate a highly conjugated fluoroaryl phenol with lowered reactivity. The removal of a methylene spacer in the polymer backbone of the hyperbranched polymer produced a polymer with greater thermal stability. The reaction conditions for polymerization were found to be general for nucleophile‐bearing perfluorinated systems. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 985–994     

Hyperbranched copolymers made from A2, B2 and BB′2type monomers (iv)

The new approach for synthesis of hyperbranched polymers from commercially available A₂ and type monomers was extended to synthesize hyperbranched copolymers. In this work, hyperbranched copoly(sulfone-amine) was prepared by copolymerization of divinyl sulfone (A₂) with 4,4′-trimethylenedipiperidine (B₂) and N-ethylethylenediamine (BB’₂). During the reaction, secondary-amino groups of B₂ and BB’₂ monomers react rapidly with vinyl groups of A₂ monomers within 35 s, generating a type of intermediate containing one vinyl group and two reactive hydrogen atoms. Now the intermediates can be regarded as a new type monomer, which further polymerizes to form hyperbranched copoly(sulfone-amine). The polymerization mechanism was investigated with FTIR and LC-MSD. The degree of branching (DB) of hyperbranched copolymers increased with decreasing the ratio of 4, 4′-trimethylenedipiperidine to N-ethylethylenediamine, so DB can be controlled. When the initial mole ratio of B₂ to BB′₂was equal to or higher than four,r≥4, resulted copolymers were semi-crystalline, while copolymers withr3 were amorphous.     

Cs2CO3 in pyrrolidinone promoted hydration of functionalized (hetero)aryl nitriles under metal-free conditions

An efficient hydration reaction of various (hetero)aryl nitriles using Cs₂CO₃ in pyrrolidinone is described. This new metal-free protocol proved to be highly effective and general to synthesize a variety of (hetero)aryl amides.     

Novel fixed‐site–carrier polyvinylamine membrane for carbon dioxide capture

Fixed‐site–carrier membranes were prepared for the facilitated transport of CO₂ by casting polyvinylamine (PVAm) on various supports, such as poly(ether sulfone) (PES), polyacrylonitrile (PAN), cellulose acetate (CA), and polysulfone (PSO). The cast PVAm on the support was crosslinked by various methods with glutaraldehyde, hydrochloric acid, sulfuric acid, and ammonium fluoride. Among the membranes tested, the PVAm cast on polysulfone and crosslinked by ammonium fluoride showed the highest selectivity of CO₂ over CH₄ (>1000). The permeance of CO₂ was then measured to be 0.014 m³ (STP)/(m² bar h) for a 20 μm thick membrane. The effect of the molecular weight of PVAm and feed pressure on the permeance was also investigated. The selectivity increased remarkably with increasing molecular weight and decreased slightly with increased pressure in the range of 1 to 4 bar. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4326–4336, 2004     

Synthesis of Alkyl-Aryl Ethers by Copper-catalyzed Etherization Reactions of Aryl Fluorides with Tetraalkylammonium Bromides and H2O

Synthesis of alkyl aryl ethers via copper‐catalyzed etherizations of electron‐deficient aryl fluorides with quaternary ammonium bromides and water has been developed. In the presence of Cu(OAc)₂, POPh₃ ( L4 ) and Cs₂CO₃, a variety of electron‐deficient aryl fluorides underwent the reaction with quaternary ammonium bromides and H₂O in moderate to good yields. The mechanism was also discussed.     

Hyperbranched copolymers made from A2, B2 and BB′2type monomers (iv)

The new approach for synthesis of hyperbranched polymers from commercially available A₂ and type monomers was extended to synthesize hyperbranched copolymers. In this work, hyperbranched copoly(sulfone-amine) was prepared by copolymerization of divinyl sulfone (A₂) with 4,4′-trimethylenedipiperidine (B₂) and N-ethylethylenediamine (BB’₂). During the reaction, secondary-amino groups of B₂ and BB’₂ monomers react rapidly with vinyl groups of A₂ monomers within 35 s, generating a type of intermediate containing one vinyl group and two reactive hydrogen atoms. Now the intermediates can be regarded as a new type monomer, which further polymerizes to form hyperbranched copoly(sulfone-amine). The polymerization mechanism was investigated with FTIR and LC-MSD. The degree of branching (DB) of hyperbranched copolymers increased with decreasing the ratio of 4, 4′-trimethylenedipiperidine to N-ethylethylenediamine, so DB can be controlled. When the initial mole ratio of B₂ to BB′₂was equal to or higher than four,r≥4, resulted copolymers were semi-crystalline, while copolymers withr3 were amorphous.     

Synthesis and characterization of N-substituted 1,4,5,6-tetrahydropyrimidine containing functional polymers as SO2 and CO2 sorbents

Novel vinyl monomers containing 1,4,5,6-tetrahydropyrimidine were prepared by the reaction of N-substituted-1,3-diaminopropane with N,N-dimethyl-formamide dimethylacetal, which gave 1-alkyl or aryl substituted 1,4,5,6-tetrahydropyrimidines, Alkylation of the tetrahydropyrimidine derivatives by chloromethylstyrene produces the N-methyl-N′-vinyl benzyl-1,4,5,6-tetrahydropyrimidinium chloride in high yields. These monomers were readily polymerized in dimethylformamide by AIBN at 80°C. Homopolymers and soluble linear copolymers were prepared and copolymerization parameters were rationalized. Further, insoluble terpolymers prepared from these monomers, styrene and divinylbenzene were tested for the sorption of the weakly acidic gases gave excellent results. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2411–2420, 1997     

Synthesis of multiblock hyperbranched‐linear poly(ether sulfone) copolymers

Hyperbranched poly(ether sulfone) was prepared in the presence of an oligomeric linear poly(ether sulfone) to generate multiblock hyperbranched‐linear (LxHB) copolymers. The LxHB copolymers were prepared in a two‐step, one‐pot synthesis by first polymerizing AB monomer to generate a linear block of a desired molecular weight followed by addition of the AB₂ monomer in a large excess (19:1, AB₂:AB) to generate the hyperbranched block. NMR integration analysis indicates that AB₂:AB ratio is independent of the reaction time. Because the molecular weight still increases with reaction time, these results suggest that polymer growth continues after consumption of monomer by condensation into a multiblock architecture. The LxHB poly(ether sulfone)s have better thermal stability (10% mass loss > 343 vs. 317 °C) and lower T_g (200 vs. > 250 °C) than the hyperbranched homopolymer, higher T_g than the linear homopolymer (<154 °C), while little difference in the solubility character was observed between the two polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4785–4793, 2008     

Cyclic and multicyclic poly(ether sulfone)s by polycondensation of 5,5′,6,6′‐tetrahydroxy‐ 3,3,3′,3′‐tetramethyl spirobisindane and 4,4′‐difluorodiphenylsulfone

5.5′,6,6′‐Tetrahydroxy‐3,3,3′,3′‐tetramethyl spirobisindane (TTSBI) was polycondensed with 4,4′‐difluorodiphenylsulfone (DFDPS) in DMSO with K₂CO₃ as catalyst and azeotopic removal of water. The feed ratio of DFDPS/TTSBI was varied from 1.0/1.0 to 2.0/1.0 at concentrations avoiding gelation. At feed ratios around 1.0/1.0 hyperbranched polymers were a minority and cyclic poly(ether sulfone)s were the predominant reaction products. With increasing feed ratio of DFDPS more and more multicyclic polymers were formed, and at a feed ratio of 1.9/1.0 perfect multicycles free of functional groups were the vast majority of the reaction product. Despite variation of the reaction conditions quantitative conversion was not achieved. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5597–5605, 2007     

Photoactive liquid crystalline polymers: A comprehensive study of linear and hyperbranched polymers synthesized by A2B2, A2B3, A3B2, and A3B3 approaches

A series of linear and hyperbranched polyester epoxies, with varied structural parameters such as kinked structure and different dendritic architectures, were synthesized by A₂ + B₂, A₂ + B₃, A₃ + B₂, and A₃ + B₃ approaches. The structures of synthesized monomers and polymers were confirmed by Fourier transform infrared, ¹H NMR, and ¹³C NMR spectroscopic techniques. The effect of varied structural parameters on phase behavior and photoresponsive properties was investigated by using differential scanning calorimeter, thermal optical polarized microscope, UV–visible spectroscopy, photoviscosity, and refractive index studies. The transition temperatures of hyperbranched polymers were higher than that of the corresponding linear analogues. All the polymers showed nematic phase (nematic droplets) over a broad temperature range. The effect of kinked structural unit on photoresponsive property is less in both linear and hyperbranched architectures. Although the effect of architectural nature is highly considerable within the hyperbranched architectures, the polymer (HPE–33) synthesized by A₃ + B₃ approach showed highest rate of photocrosslinking, followed by HPE–I 32; HPE–T 32, and HPE–23, which were synthesized by A₃ + B₂ and A₂ + B₃ approaches, respectively. The findings in photoresponsive properties were further supported by molecular modeling studies. Substantial variation of refractive index (0.015–0.024) indicates that these polymers could be used for optical recording. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Hyperbranched poly(ether–urea)s using AB2‐type blocked isocyanate monomer and azide monomer: Synthesis,characterization, reactive end functionalization,and copolymerization with AB monomer

3,5‐bis(4‐aminophenoxy)phenyl phenylcarbamate—a novel AB₂‐type blocked isocyanate monomer and 3,5‐bis{ethyleneoxy(4‐aminophenoxy)}phenyl carbonyl azide—a novel AB₂‐type azide monomer were synthesized in high yield. Step‐growth polymerization of these monomers were found to give a first example of hyperbranched poly (aryl‐ether‐urea) and poly(aryl‐alkyl‐ether‐urea). Molecular weights (M_w) of the polymer were found to vary from 1,858 to 52,432 depending upon the monomer and experimental conditions used. The polydispersity indexes were relatively narrow due to the controlled regeneration of isocyanate functional groups for the polymerization reaction. The degree of branching (DB) was determined using ¹H‐NMR spectroscopy and the values ranged from 87 to 54%. All the polymers underwent two‐stage decomposition and were stable up to 300 °C. Functionalized end‐capping of poly(aryl‐ether‐urea) using phenylchloroformate and di‐t‐butyl dicarbonate (Boc)₂O changed the thermal properties and solubility of the polymers. Copolymerization of AB₂‐type blocked isocyante monomer with functionally similar AB monomer were also carried out. The molecular weights of copolymers were found to be in the order of 6 × 10⁵ with narrow dispersity. It was found that the T_g's of poly(aryl‐alkyl‐ether‐urea)s were significantly less (46–49 °C) compared to poly(aryl‐ether‐urea)s. Moreover the former showed melting transition at 154 °C, which was not observed in the latter case. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2959–2977, 2007     

Kinetic study of semifluorinated arylene vinylene ether polymers

Fluorinated arylene vinylene ether (FAVE) polymers were prepared from the base‐promoted addition of commercial 2,2‐bis(4‐hydroxyphenyl)hexafluoropropane (6F bisphenol A) to aryl trifluorovinyl ether (TFVE), 2,2′‐bis(4‐trifluorovinyloxybiphenyl)‐1,1,1,3,3,3‐hexafluoropropane. The step‐growth polymerization kinetics by using stoichiometric NaH and catalytic Cs₂CO₃ were investigated by monitoring the ¹⁹F NMR signals of the aryl TFVEs. The nth order kinetic model was used to determine rate constants over a series of programmed temperatures. Polymerization using stoichiometric NaH resulted in second‐order kinetics with an activation energy of 59 kJ/mol. This model kinetic study provided insight into the mechanistic pathways of the FAVE polymer system that has recently shown a lot of interest in many areas of materials science. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Dendritic aromatic polyamides and polyimides

The syntheses and properties of dendritic and hyperbranched aromatic polyamides and polyimides are reviewed. In addition to conventional stepwise reactions for dendrimer synthesis, an orthogonal/double‐stage convergent approach and dendrimer syntheses with unprotected building blocks are described as new synthetic strategies for dendritic polyamides. Hyperbranched polyamides and polyimides composed of various repeating units are presented. Besides the self‐polycondensation of AB₂‐type monomers, new polymerization systems with AB₄, AB₈, A₂ + B₃, and A₂ + BB′₂ monomers have been developed for hyperbranched polyamides and polyimides. The copolymerization of AB₂ and AB monomers is discussed separately with respect to the effects of branching units on the properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1293–1309, 2004     

Synthesis and characterization of novel hyperbranched poly(imide silsesquioxane) membranes

A new family of hyperbranched polymers with chemical bonds between the hyperbranched polyimide and polysilsesquioxane network was synthesized by the reaction of an amine‐terminated aromatic hyperbranched polyimide with 3‐glycidoxypropyl trimethoxysilane, followed by hydrolysis and polycondensation in the presence of an acid catalyst. The hyperbranched poly(imide silsesquioxane) membranes were fabricated by the casting the aforementioned polymer solution onto a NaCl optical flat, which was followed by heating at 80 °C for 24 h. The membranes were characterized by Fourier transform infrared, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy, N₂ adsorption and desorption, and CO₂ adsorption and desorption. The presence of covalent bonds between the hyperbranched polyimide and polysilsesquioxane segments had a significant effect on the properties of the membranes. N₂ adsorption–desorption isotherms for these membranes showed surface areas of 6–16 m²/g, whereas CO₂ adsorption–desorption isotherms showed much higher surface areas in the range of 106–127 m²/g. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3736–3743, 2003     

Facile synthesis of hyperbranched polyimides from A2 + BB′2 monomers

Facile syntheses of hyperbranched polyimides were realized by the polymerization of A₂ + BB^′₂ monomers, 2,2‐bis(3,4‐dicarboxylphenyl) hexafluoropropane dianhydride (6FDA) + 2,4,6‐triaminopyrimidine (TAP), performed by mixing the monomers together in N‐methylpyrrolidone at 17% w/v concentrations with molar ratios of 6FDA:TAP ranging from 1:1 to 2:1. The lower reactivity of 2‐amino as compared with 4‐/6‐amino in TAP, demonstrated by ¹H NMR, was probably the main reason for no gelation formed during the polymerization although monomer conversions surpassed the theoretical gel points. Fourier transform infrared spectroscopy and NMR were used to verify the structures of the obtained polymers. ¹H NMR analysis indicated the degrees of branching (DB) of the polymers increased from 36 to 83% with the molar ratios of 6FDA:TAP increasing from 1:1 to 2:1. Molecular weights were determined by gel permeation chromatography, and inherent viscosities were measured. Glass‐transition temperature values, determined by differential scanning calorimetry, decreased when DB increased, and thermogravimetric analysis reflected the excellent thermal stability of the obtained hyperbranched polyimides. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4563–4569, 2002     

Photolytic transformation of aryl benzobisoxazole and aryl benzobisthiazole compounds into carbon dioxide

Solid‐state aryl benzobisoxazole and aryl benzobisthiazole compounds photolyzed in the presence of O₂ undergo cleavage to produce benzobisoxazoles (or benzobisthiazoles), benzonitriles, and benzamides. A very high percentage of the carbon atoms in one of the two segments from chain cleavage are converted to CO₂. This very unusual observation has been carefully confirmed by gas chromatography/mass spectroscopy analysis of the gaseous components in the photolysis vessel before and after photolysis, labeling experiments, and the correlation of the mass reduction in photolyzed polymers and the amount of CO₂ that evolves. The rate of CO₂ generation is used to compare the relative photostability of aryl benzobisoxazole and aryl benzobisthiazole model compounds, films, and fibers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1868–1877, 2007