Polymers with electron-deficient olefin moieties by oxidation of precursors containing “push–pull” olefin (β-alkylmercaptoenoate) moieties in the main chain

Oxidation of a polymer (1) having β-alkylmercaptoenoate moieties in the main chain by m-chloroperbenzoic acid (MCPBA) is described. Oxidation of 1 proceeded selectively to give polymers having vinyl sulfoxide or vinyl sulfone moieties in the main chain by using an appropriate amount of MCPBA. In the case of 1.1 equiv of MCPBA (relative to the sulfur atom), a polymer (4) having vinyl sulfoxide moieties selectively in the main chain was obtained in quantitative yield without side reactions. Likewise, a polymer (5) having vinyl sulfone moieties was obtained in quantitative yield by using 2.6 equiv of MCPBA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2589–2592, 1998     

Synthesis of an amphiphilic polymer having hydrophobic acetal and hydrophilic pyrrolidone moieties and its application to persisting release of aldehyde as a pro‐fragrance

A polymer having acetal moiety in the side chain was synthesized by a reaction of 1,3‐diol structure of poly(vinyl alcohol‐co‐N‐vinylpyrrolidone) and octanal. The hydrophobicity of the resulting acetal moiety and the hydrophilicity of the pyrrolidone moiety allowed the polymer to exhibit amphiphilicity. The polymer released octanal by hydrolysis of the acetal side chains under acidic conditions. The release of octanal was enhanced by the increased hydrophilicity of the polymer because of the presence of pyrrolidone moiety. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3816–3822, 2010     

A new water‐soluble branched poly(ethylene imine) derivative having hydrolyzable imidazolidine moieties and its application to long‐lasting release of aldehyde

A new water‐soluble poly(ethylene imine)‐derivative having imidazolidine moieties was developed. With using branched poly(ethylene imine) (BPEI) as a precursor, it was modified by Michael addition reaction of its primary amino group to an acrylate having poly(ethylene glycol) (PEG) chain. The modified BPEI was reacted with octanal to give the corresponding BPEI derivative having octanal‐derived imidazolidine moieties. The obtained polymer inherited the high hydrophilicity of the attached PEG chains to allow hydrolysis of the imidazolidine moieties under homogeneous conditions in aqueous media, leading to long‐lasting release of octanal. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Radical ring-opening polyaddition of a bifunctional vinylcyclopropane bearing a spiroacetal moiety with dithiols

Radical polyadditions of vinylcyclopropane having spiroacetal moiety, 1,10-divinyl-4,8,12,15-tetraoxatrispiro[2.2.2.2.2.2] pentadecane ( 1 ), and various dithiols were examined. 1 was prepared by the reaction of 1,1-dichloro-2-vinylcyclopropane and pentaerythritol, and radical polyadditions of 1 and dithiols were carried out at 60 and 120°C for 20 h in the presence of an appropriate initiator (3 mol % vs. 1 ) in degassed sealed ampoules or at 20°C under photo irradiation by using a 400 W high-pressure mercury lamp. Poly( 1 ), pale yellow transparent viscous polymers was isolated by reprecipitation with ether containing a small amount of triethylamine to avoid hydrolysis of the polymer. The obtained polymers were soluble in chlorobenzene, DMF, and chloroform but insoluble in ether and n-hexane. The molecular weights of the polymers obtained from aliphatic dithiols were smaller than those from aromatic ones. The structure of the polymer was determined by comparing the NMR spectra with those of the model compounds, which were obtained by radical addition of 1 and benzyl mercaptan. The reaction proceeded through radical polyaddition of dithiol to 1 via radical ring-opening polymerization of the cyclopropane ring. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2487–2492, 1997     

Reaction of p‐toluenesulfonyl isocyanate with polymers having amide moieties and hydrolysis of the obtained polymers

The chemical modification of polymers having amide moieties was carried out with p‐toluenesulfonyl isocyanate. The resulting polymers revealed high hydrolytic character. For example, poly(acrylamide) was refluxed with an excess amount of p‐toluenesulfonyl isocyanate in THF for 50 h to obtain a structurally modified polymer in 76% yield, whose sulfonylurea functionality was 100%. The resulting polymer was subjected to hydrolysis in a 1 M NaOH solution at 50 °C to convert 90% of the sulfonylurea in the side chain to the carboxylic acid moieties. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3440–3449, 2000     

Synthesis of functional polymers bearing cyclic carbonate groups from (2-oxo-1,3-dioxolan-4-yl) methyl vinyl ether

(2-Oxo-1,3-dioxolan-4-yl) methyl vinyl ether (OVE) was synthesized with high yield by addition reaction of glycidyl vinyl ether with carbon dioxide using tetrabutylammonium bromide (TBAB) as a catalyst. OVE was also prepared by reaction with β-butyrolactone or sodium hydrogencarbonate in the presence of TBAB as the catalyst. Poly [(2-oxo-1,3-dioxolan-4-yl) methyl vinyl ether] [P(OVE)] was obtained with high yield by cationic polymerization of OVE catalyzed using boron trifluoride diethyl ether complex in dichloromethane. Polymers bearing pendant 5-membered cyclic carbonate groups were also prepared by radical copolymerization of OVE with some electron-accepting monomers. Furthermore, addition reaction of P(OVE) with alkyl amines yielded the corresponding polymer having pendant 2-hydroxyethyl carbamate residue with high conversions. © 1994 John Wiley & Sons, Inc.     

Radical polyaddition of difunctional vinyloxirane with thiols for synthesis of linear and networked polysulfides

Radical ring‐opening polyaddition of bifunctional vinyloxirane with multifunctional thiols was investigated. The polyaddition proceeded smoothly via the ring‐opening reaction of the oxirane moiety to afford the corresponding networked polymers bearing vinyl ether and sulfide moieties in the main chain. The thermal properties of the networked polymers and volume changes upon the polyaddition were investigated. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 783–788     

Synthesis of polyethers with unsymmetrical structures by the polyaddition of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane with diacyl chlorides

Polyethers with unsymmetrical structures in the main chains and pendant chloromethyl groups were synthesized by the polyaddition of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane (EGMO) with certain diacyl chlorides with quaternary onium salts or pyridine as catalysts. The unsymmetrical polyaddition of EGMO containing two different cyclic ether moieties such as oxirane and oxetane groups with terephthaloyl chloride proceeded smoothly in toluene at 90 °C for 6 h to give polymer 1 with a number‐average molecular weight (M_n) of 51,700 in a 93% yield when tetrabutylammonium bromide (TBAB) was used as a catalyst. The polyaddition also proceeded smoothly under the same conditions when other quaternary onium salts, such as tetrabutylammonium chloride, tetrabutylammonium iodide, tetrabutylphosphonium chloride, and tetrabutylphosphonium bromide, and pyridine were used as catalysts. However, without a catalyst no reaction occurred under the same reaction conditions. Polyadditions of EGMO with isophthaloyl chloride and adipoyl chloride gave polymer 2 (M_n = 28,700) and polymer 3 (M_n = 25,400) in 99 and 65% yields, respectively, under the same conditions. The chemical modification of the resulting polymer, polymer 1 , which contained reactive pendant chloromethyl groups, was also attempted with potassium 3‐phenyl‐2,5‐norbornadiene‐2‐carboxylate with TBAB as a phase‐transfer catalyst, and a polymer with 65 mol % pendant norbornadiene moieties was obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 368–375, 2001     

Synthesis and crosslinking behavior of a novel linear polymer bearing 1,2,3‐triazol and benzoxazine groups in the main chain by a step‐growth click‐coupling reaction

The click‐coupling reaction was applied to polycondensation, to synthesize a high‐molecular weight prepolymer having benzoxazine moieties in the main chain. For the polycondensation, a bifunctional N‐propargyl benzoxazine was synthesized from bisphenol A, propargylamine, and formaldehyde. The propargyl group was efficiently used for the copper(I)‐catalyzed alkyne‐azide “click” reaction with p‐xylene‐α,α′‐diazide, to give the corresponding linear polycondensate having 1,2,3‐triazole junctions. The polycondensation proceeded in N,N‐dimethylformamide (DMF) at room temperature. By this highly efficient “click‐” polycondensation reaction, the benzoxazine ring in the monomer was successfully introduced into the polymer main chain without any side reaction. The obtained polymer (=prepolymer) underwent thermal crosslinking to afford the corresponding product, which was insoluble in a wide range of organic solvents and exhibited higher thermal stability than the polymer before crosslinking. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2316–2325, 2008     

Synthesis of silicon-containing vinyl ether monomers and oligomers and their photoinitiated polymerization

Silicon-containing divinyl ether monomers were synthesized by the addition reaction of glycidyl vinyl ether ( 1 ) with various silyl dichlorides using tetra-n-butylammonium bromide (TBAB) as a catalyst. The reaction of 1 with diphenyl dichlorosilane gave bis-[1-(chloromethyl)-2-(vinyloxy)-ethyl]diphenyl silane ( 3a ) in 89% yield. Polycondensations of 3a with terephthalic acid were also carried out using 1,8-Diazabicyclo[5.4.0]-7-undecene (DBU) to afford silicon-containing polyfunctional vinyl ether oligomers ( 5 ). A multifunctional Si-monomer with both vinyl ether and methacrylate groups ( 7 ) was prepared by the reaction of 3a with potassium methacrylate using TBAB as a phase transfer catalyst. Photoinitiated cationic polymerizations of these vinyl ether compounds proceeded rapidly using the sulfonium salt, bis-[4-(diphenyl-sulfonio)phenyl]sulfide-bis-hexafluorophoshate (DPSP), as the cationic photoinitiator in neat mixtures upon UV irradiation. Multifunctional monomer 7 with both vinyl ether and methacrylate groups showed “hybrid curing properties” using both DPSP and the radical photoinitiator, 2,4,6-trimethylbenzoyl diphenylphoshine oxide (TPO). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3217–3225, 1997     

Thiol-Ene Cationic and Radical Reactions: Cyclization,Step-Growth,and Concurrent Polymerizations for Thioacetal and Thioether Units

Thiol-ene cationic and radical reactions were conducted for 1:1 addition between a thiol and vinyl ether, and also for cyclization and step-growth polymerization between a dithiol and divinyl ether. p-Toluenesulfonic acid (PTSA) induced a cationic thiol-ene reaction to generate a thioacetal in high yield, whereas 2,2′-azobisisobutyronitrile resulted in a radical thiol-ene reaction to give a thioether, also in high yield. The cationic and radical addition reactions between a dithiol and divinyl ether with oxyethylene units yielded amorphous poly(thioacetal)s and crystalline poly(thioether)s, respectively. Under high-dilution conditions, the cationic and radical reactions resulted in 16- and 18-membered cyclic thioacetal and thioether products, respectively. Furthermore, concurrent cationic and radical step-growth polymerizations were realized using PTSA under UV irradiation to produce polymers having both thioacetal and thioether linkages in the main chain.     

Preparation of polymeric alcohol bearing oligo(oxyethylene) moiety by radical polyaddition through ketyl radical

Hydrophilic polymers having both oligo(oxyethylene) moieties and tertiary alcohol units in the main chain were prepared by the radical polyaddition of the dike-tones with distyryl compounds by using samarium(II) iodide as an electron transfer agent. Polyaddition of 4,4′-(1,4-phenylene)bis-2-butanone or 6,9-dioxatetradeca-2,13-dione with distyryl compounds such as 1,15-di(4-ethenylphenyl)-2,5,8,11,14-pentaoxapentadecane, 1,18-di(4-ethenylphenyl)-2,5,8,11,14,17-hexaoxaoctadecane, or 1,21-di(4-ethenylphenyl)-2,5,8,11,14,17,20-heptaoxaheneicosane resulted in the formation of the corresponding polymeric alcohols in moderate yields (46–75%). The produced polymers showed high solubility in common solvents, and their molecular weights estimated by GPC (THF, polystyrene standard) were 5200–8100. No serious difference in the molecular weight of the polymer between after and before the treatment with cerium ammonium nitrate indicated that the produced polymers were inert under the oxidative condition where oxidative cleavage of the main chain of poly(vinyl alcohol) takes place. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 715–720, 1997     

Precision synthesis of graft copolymers via living cationic polymerization of p‐acetoxystyrene followed by friedel–crafts‐type termination reaction

This study describes a novel precision synthesis strategy for graft copolymers using Friedel–Crafts‐type termination reaction between a cationically prepared poly(styrene derivative) and the naphthyl side groups from a poly(vinyl ether) main chain. The pendant alkoxynaphthyl groups on the poly(vinyl ether) efficiently terminated the living cationic polymerization of p‐acetoxystyrene (AcOSt) with SnCl₄ in the presence of ethyl acetate as an added base. This research provides the first example of a well‐defined graft copolymer prepared using this method. The resulting polymer contained 40 poly‐(AcOSt) branches, as calculated from the M_w determined via gel permeation chromatography–MALS analysis, which was in good agreement with the estimated number of branches obtained from ¹H NMR analysis. The acetoxy groups in the grafted poly(AcOSt) chains were easily converted into phenolic hydroxy groups under basic conditions. The as‐obtained graft copolymer with poly(p‐hydroxystyrene) side chains exhibited a pH‐sensitive phase separation in water. The synthetic method for preparing the graft copolymers was also effective in the living cationic polymerizations of other styrene derivatives. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4675–4683     

Coupling polymerization of monofunctional allene derivatives with malonates bearing aryl halides moieties via π-allylpalladium complex

A novel polymerization method of allene derivatives with nucleophiles bearing aryl halide moieties (A-B type) is described. By the polymerization of hexylallene with malonates bearing an aryl iodide part, polymers consisting both of internal and exomethylene (exo) double bonds were obtained by mean of the coupling reaction of three different components in high yields. On the other hand, a polymer obtained from phenylallene was selectively composed of internal double bonds (E and Z). By the reaction of hexylallene with a malonate bearing two aryl halide moieties (A-B₂ type), a multibranched polymer was also obtained. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2097–2103, 1997     

Synthesis and characterization of original alternated fluorinated copolymers bearing glycidyl carbonate side groups

A vinyl ether bearing a carbonate side group (2‐oxo‐1,3‐dioxolan‐4‐yl‐methyl vinyl ether, GCVE) was synthesized and copolymerized with various commercially available fluoroolefins [chlorotrifluoroethylene (CTFE), hexafluoropropylene (HFP), and perfluoromethyl vinyl ether (PMVE)] by radical copolymerization initiated by tert‐butyl peroxypivalate. Although HFP, PMVE, and vinyl ether do not homopolymerize under radical conditions, they copolymerized easily yielding alternating poly(GCVE‐alt‐F‐alkene) copolymers. These alternating structures were confirmed by elemental analysis as well as ¹H, ¹⁹F, and ¹³C NMR spectroscopy. All copolymers were obtained in good yield (73–85%), with molecular weights ranging from 3900 to 4600 g mol^?1 and polydispersities below 2.0. Their thermogravimetric analyses under air showed decomposition temperatures at 10% weight loss (T_d,10%) in the 284–330°C range. The HFP‐based copolymer exhibited a better thermal stability than those based on CTFE and PMVE. The glass transition temperatures were in the 15–65°C range. These original copolymers may find potential interest as polymer electrolytes in lithium ions batteries. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Stereoelective cationic polymerization of propenyl ether by asymmetric catalysts

In order to elucidate the possibility of stereoelective cationic polymerization (asymmetric selective polymerization) of olefinic monomers, racemic cis- and trans-1-methylpropyl propenyl ether and racemic 1-methylpropyl vinyl ether were polymerized by asymmetric alkoxyaluminum dichlorides. In the polymerization of racemic cis-1-methylpropyl propenyl ether with (?)-menthoxyaluminum dichloride in toluene at ?78°C, the polymer obtained showed a positive optical activity, and the residual monomers were converted by BF₃OEt₂ into a polymer having a negative optical activity. Thus, the stereoelective polymerization of racemic cis-1-methylpropyl propenyl ether was beyond any doubt attained in homogeneous cationic polymerization. In the polymerization of the trans isomer by the same catalyst, an optically active polymer was hardly formed. In the polymerization of racemic 1-methylpropyl vinyl ether which has no β-methyl group, stereoelectivity was not observed at all. The cis-1-methylpropyl propenyl ether did not produce an optical active polymer in the polymerization catalyzed by (S)-1-methylpropoxyaluminum dichloride or (S)-2-methylbutoxyaluminum dichloride under the same polymerization conditions.     

Synthesis of poly(silyl ether)s containing pendant chloromethyl groups by the polyaddition of bis(oxetane)s with dichlorosilanes

The polyaddition of bis(3‐ethyl‐3‐oxetanylmethyl) terephthalate (BEOT) with dichlorodiphenylsilane (CPS) using tetrabutylammonium bromide (TBAB) as a catalyst proceeded under mild reaction conditions to afford a polymer containing silicon atoms in the polymer main chain. A poly(silyl ether) (P‐1) with a high molecular weight (M_n = 53,200) was obtained by the reaction of BEOT with CPS in the presence of 5 mol % of TBAB in toluene at 0 °C for 1 h and then at 50 °C for 24 h. The structure of the resulting polymer was confirmed by IR and ¹H NMR spectra. Furthermore, it was proved that the polyaddition of certain bis(oxetane)s with dichlorosilanes proceeds smoothly to give corresponding poly(silyl ether)s with TBAB as the catalyst. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2254–2259, 2000     

Thiol‐Ene Cationic and Radical Reactions: Cyclization,Step‐Growth,and Concurrent Polymerizations for Thioacetal and Thioether Units

Thiol‐ene cationic and radical reactions were conducted for 1:1 addition between a thiol and vinyl ether, and also for cyclization and step‐growth polymerization between a dithiol and divinyl ether. p‐Toluenesulfonic acid (PTSA) induced a cationic thiol‐ene reaction to generate a thioacetal in high yield, whereas 2,2′‐azobisisobutyronitrile resulted in a radical thiol‐ene reaction to give a thioether, also in high yield. The cationic and radical addition reactions between a dithiol and divinyl ether with oxyethylene units yielded amorphous poly(thioacetal)s and crystalline poly(thioether)s, respectively. Under high‐dilution conditions, the cationic and radical reactions resulted in 16‐ and 18‐membered cyclic thioacetal and thioether products, respectively. Furthermore, concurrent cationic and radical step‐growth polymerizations were realized using PTSA under UV irradiation to produce polymers having both thioacetal and thioether linkages in the main chain.     

Polymeric networks by the cationic crosslinking reaction of poly(allenyl ether)s having oligo(oxyethylene) moieties in the side chain

Cationic crosslinking reactions of poly(allenyl ether)s having oligo(oxyethylene) moieties prepared by the radical polymerization of the corresponding allenyl ethers were carried out under some varied reaction conditions. For instance, a crosslinked polymer was obtained in 82% yield by the treatment of poly(ethylene glycol methyl allenyl ether) ( 1a ) with 1.2 mol% of BF₃·OEt₂ ( 2 ) under high concentration in dichloromethane (46 wt %). The gels obtained showed good swelling properties in water, alcohols, and polar organic solvents such as dichloromethane. In particular, the degrees of swelling of these gels in aqueous sodium chloride (1M) were quite similar to those in ion-free water, indicating that these gels served as nonionic hydrogels. © 1994 John Wiley & Sons, Inc.     

Radical ring‐opening copolymerization behavior of vinyloxirane: Synthesis of copolymer from 2‐isopropenyl‐3‐phenyloxirane and styrene and its functionalization

The radical ring‐opening copolymerization of 2‐isopropenyl‐3‐phenyloxirane (1) with styrene (St) was examined to obtain the copolymer [copoly(1‐St)] with a vinyl ether moiety in the main chain. The copolymers were obtained in moderate yields by copolymerization in various feed ratios of 1 and St over 120 °C; the number‐average molecular weights (M_n) were estimated to be 1800–4200 by gel permeation chromatography analysis. The ratio of the vinyl ether and St units of copoly(1‐St) was estimated with the ¹H NMR spectra and varied from 1/7 to 1/14 according to the initial feed ratio of 1 and St. The haloalkoxylation of copoly(1‐St) with ethylene glycol in the presence of N‐chlorosuccinimide produced a new copolymer with alcohol groups and chlorine atoms in the side group in a high yield. The M_n value of the haloalkoxylated polymer was almost the same as that of the starting copoly(1‐St). The incorporated halogen was determined by elemental analysis. The analytical result indicated that over 88% of the vinyl ether groups participated in the haloalkoxylation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3729–3735, 2000