Evidences of phase separation in moisture‐cured poly(urethane urea)s by means of temperature modulated differential scanning calorimetry

The degree of phase separation in several moisture‐cured poly(urethane urea)s (PUUs) was studied by FTIR spectroscopy, wide angle X‐ray diffraction (WAXD), and temperature‐modulated differential scanning calorimetry (TMDSC). This latter technique was shown to be particularly useful in analysing the degree of phase separation in PUU polymers. Both phase mixing and phase segregation coexisted in the PUUs and the degree of phase separation increased as the urea hard segment (HS) content in the PUU increased. The maximum solubility of urea HSs into the polyol soft segments (SSs) was achieved for 50 wt % urea HS content in diol‐based PUUs, whereas for triol‐based PUUs the highest solubility between HS and SS was reached for lower urea HS amount. Finally, the higher the urea HS content the higher the extent of phase separation in the PUU. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3034–3045, 2007     

Phase separation in segmented poly(urethane urea) copolymers during reaction injection molding (RIM) polymerization

In situ experiments were performed with a portable RIM (reaction injection molding) minimachine interfaced to an FTIR spectrophotometer to follow the reaction chemistry and monitor phase separation of copoly(urethane urea)s during RIM polymerization. The PUU copolymers were based on ethylene oxide-capped poly(propylene oxide) polyether diol, 3,5-diethyltoluenediamine (DETDA), and uretonimine liquefied 4,4′-diphenylmethane diisocyanate. The effect of catalyst concentration on the degree of phase separation in the as-molded RIM PUU copolymers was investigated by using differential scanning calorimetery and scanning electron microscopy as supplementary methods. The results suggested that an increase of degree of phase separation and a decrease of the size of hard-segment-rich domains take place with a rise of catalyst concentration. The morphological feature was a consequence in combination with the increase in relative rate of urethane formation and the ordering of hydrogen bonding through urea groups. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 865–873, 1997.     

Hydrolytic degradation of polyester–polyether block copolymer based on polycaprolactone/poly(ethylene glycol)/polylactide

Polyester–polyether block copolymers based on polycaprolactone/poly(ethylene glycol)/polylactide (PCEL) with various compositions were synthesized by direct copolymerization of ϵ‐caprolactone, L ‐lactide and PEG (6000) in the presence of stannous octoate at 130 °C for 56 hr. The degradation behavior of the copolymers was investigated in a pH 7.4 phosphate buffer solution at 37 ±1 °C. Various techniques such as weight, gel permeation chromatography, ¹H nuclear magnetic resonance, differential scanning calorimetry and X‐ray diffractometry were used to monitor the changes in water absorption, weight loss, molar mass, molar mass distribution, thermal properties and compositions. The results show that the hydrophilicity of copolymer was enhanced with increasing poly(ethylene oxide) content, which led to the PEG sequences fast release and an increase in weight loss of the copolymer. Bimodal chromatograms were detected in the degradation, which were attributed to the degradation mechanism of the partial crystalline polymer proceeding predominantly in amorphous zones. Copyright © 2000 John Wiley & Sons, Ltd.     

Novel silver/polyurethane nanocomposite by in situ reduction: Effects of the silver nanoparticles on phase and viscoelastic behavior

A novel silver/poly(carbonate urethane) nanocomposite was prepared through in situ reduction of a silver salt (AgNO₃) added to a solution consisting of a commercial poly(carbonate urethane) dissolved in N,N‐dimethylformamide (DMF). In this system, the presence of the poly(carbonate urethane) was proved to protect the silver nanoparticles, whose formation was confirmed by means of UV–vis spectroscopy, from aggregation phenomena. The silver morphology developed in the solid state after DMF casting was imaged by FESEM. Homogeneous dispersion of silver nanoprisms in the poly(carbonate urethane) matrix was clearly observed. The effects of dispersion of silver nanoparticles within the poly(carbonate urethane) matrix were investigated by means of ATR‐FTIR and multifrequency dynamic mechanical thermal analyses. The obtained results revealed that the presence of silver nanoparticles modifies both the phase and the viscoelastic behaviors of poly(carbonate urethane). As a matter of fact, the hydrogen bond formation in the hard and soft segments was found to be hindered and the molecular motions of the soft segments were restricted, because a comparatively higher activation energy was required for the related α‐relaxation process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 344–350, 2008     

Sequential analysis of polyesters by stepwise chemical degradation: Application to oligo and poly(alkylene terephthalate)s

A specifically tailored reagent was used to label the hydroxyl end groups of poly(ethylene/butylene terephthalate), which is synthesized by transesterification of the corresponding homopolymers. The terminal monomeric unit was then eliminated, together with the attached label, as a low molecular-weight cyclic compound. Specially synthesized reference compounds containing ethylene terephthalate and butylene terephthalate units enabled the terminal monomeric unit to be identified as butylene terephthalate, although the copolymer showed an otherwise random distribution. Despite the practical and theoretical reasons that restrict this sequential degradation to the last monomeric unit for polymers, the principle can be used in a wider range of applications if combined with selective degradation and separation by means of HPLC, which results in chemically uniform oligomers. The ultimate and penultimate monomeric units of ethylene/butylene terephthalate type oligomers can be identified using the cyclodegradation procedure described here. © 1993 John Wiley & Sons, Inc.     

聚芳醚醚酮的热老化寿命研究

本工作用热重法(TG)研究了聚芳醚醚酮(PEEK)在空气和氮气中的热分解反应过程;确定了PEEK在这两种气氛中的热分解反应模型均符合无规引发断裂模型;在空气中PEEK的热分解显示两个过程,由此计算其在空气中第一阶段的热分解和氮气中的热分解反应活化能分别为214.7kJ/mol和232.2kJ/mol;由热分解反应动力学参数推算出热老化寿命曲线,并讨论了实验条件对结果的影响,进而以失重5%作为材料寿终指标估算出PEEK在氮气和空气中使用10年的最高温度分别为307℃和274℃。     

Tunable microstructures and mechanical deformation in transparent poly(urethane urea)s

Transparent poly(urethane urea) (TPUU) materials offer an avenue to enable material designs with potential to achieve simultaneous enhancements in both physical and mechanical properties. To optimize the performance required for each application, the molecular features that influence the microstructure, the glass transition temperature (T_g), the deformation mechanisms, and the mechanical deformation behavior must be understood and exploited. In this work, a comprehensive materials characterization of select model PUUs with tunable microstructures is addressed. Increasing the hard segment (HS) content increases the stiffness and flow stress levels, whereas altering the soft segment (SS) molecular weight from 2000 to 1000 g/mol leads to an enhanced phase mixing with a SS T_g shifted ～17 °K toward higher temperatures as well as broadening of the SS relaxation closer to room temperature. As a result, the 1K TPUU materials display greater rate‐dependent stiffening and strain hardening on mechanical deformation over the broad range of strain rates covered in this work (10^?3 to 10⁴ s^?1). In such case of similar urea‐based HS content, the molar content of the urethane linkages, per stoichiometric requirements, is much higher in the 1K TPUUs than the 2K TPUUs. These additional urethane moieties lead to an increase in the extent of intermolecular interactions, via hydrogen bonding between the HS and the SS, providing not only further phase mixing and stronger rate sensitivity but also provide 1K TPUUs with drastically improved barrier properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Synthesis and characterization of multiblock copolymers based on hydrophilic disulfonated poly(arylene ether sulfone) and hydrophobic partially fluorinated poly(arylene ether ketone) for fuel cell applications

Sulfonated fluorinated multiblock copolymers based on high performance polymers were synthesized and evaluated for use as proton exchange membranes (PEMs). The multiblock copolymers consist of fully disulfonated poly(arylene ether sulfone) and partially fluorinated poly(arylene ether ketone) as hydrophilic and hydrophobic segments, respectively. Synthesis of the multiblock copolymers was achieved by a condensation coupling reaction between controlled molecular weight hydrophilic and hydrophobic oligomers. The coupling reaction could be conducted at relatively low temperatures (e.g., 105 °C) by utilizing highly reactive hexafluorobenzene (HFB) as a linkage group. The low coupling reaction temperature could prevent a possible trans‐etherification, which can randomize the hydrophilic‐hydrophobic sequences. Tough ductile membranes were prepared by solution casting and their membrane properties were evaluated. With similar ion exchange capacities (IECs), proton conductivity and water uptake were strongly influenced by the hydrophilic and hydrophobic block sequence lengths. Conductivity and water uptake increased with increasing block length by developing nanophase separated morphologies. Atomic force microscopy (AFM) and transmission electron microscopy (TEM) experiments revealed that the connectivity of the hydrophilic segments was enhanced by increasing the block length. The systematic synthesis and characterization of the copolymers are reported. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 214–222, 2010     

Polymer-Solvent Interactions in Solutions of Thermoresponsive Polymers Studied by NMR and IR Spectroscopy

Summary: NMR relaxation and diffusion coefficient measurements revealed that a portion of water molecules is bound in mesoglobules formed in poly(N-isopropylmethacrylamide) (PIPMAm) and poly(vinyl methyl ether) (PVME) aqueous solutions above the LCST, with fast exchange between bound and free states (residence time ∼1 ms). Two types of bound water molecules were assigned to water bound inside mesoglobules and on their surface. For highly concentrated PVME/D₂O solutions (c ≥ 20 wt%) a slow exchange was detected by NMR for bound water (residence time = 2.1 s). For PIPMAm aqueous solution IR spectra indicate a two-steps character of the phase transition. For PIPMAm in D₂O/ethanol (EtOH) mixtures the globular structures were observed by NMR at 298 K for certain compositions of the mixed solvent (cononsolvency effect). Virtually no EtOH is bound in these globular structures, in contrast to the temperature-induced globular structures.     

Synthesis and surface properties of novel fluorinated polyurethane base on F‐containing chain extender

A novel fluorinated chain extender, (1‐(ethyl(2‐hydroxyethyl)amino)‐3‐ ((3,3,4,4,5,5,6,6,7,7,8,8,8‐tridecafluorooctyl)oxy)propan‐2‐ol) (FPO), was synthesized and characterized by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), and elemental analysis. Poly (ether urethane)s containing various amounts of the chain extender with fluorinated side chains (FPUs) were prepared by isophorone diisocyanate (IPDI), polytetra‐methylene‐ether‐glycol (PTMG), 3‐aminopropyltriethoxysilane (KH‐550), and 1,4‐butandiol (BDO). Films of FPUs were investigated by water absorption, contact angle, pencil hardness, adhesive force, and thermal analysis. Coating FPUs on micro‐nano concave‐convex structure plate realizes superhydrophobic performance. Scanning electron microscope (SEM) and atomic force microscopy (AFM) demonstrated that there is a lot of irregular concave‐convex structure, which forms a typical air cushion model. X‐ray photoelectron spectroscopy (XPS) analysis showed that surface fluorine content is 165% more than that of film average fluorine content. The superhydrophobic plate with 10% or higher F‐containing FPUs coating is of outstanding chemical corrosion resistance, excellent solvent resistance, and wear resistance.     

Synthesis and electrical,rheological and thermal characterization of conductive polyurethane

This work studies the electrical, rheological, and thermal characteristics for polyurethane (PU) capped with tetraaniline as a new material, tetraaniline-containing poly(urethane–urea) (TAPU). The conductivities can be increased from less than 10⁻¹⁰ S/cm for pure PU to 10⁻⁴ S/cm for TAPU, independently of the length of the soft segment in the TAPU backbone chain. The tensile strength and modulus are increased when PU is copolymerized with tetraaniline. The viscoelastic creep can be effectively simulated using a Burgers model. Additionally, TAPU has higher viscosity, higher retardation time, and lower compliance J ₁ than regular PU. Restated, TAPU exhibits less elastic but superior permanent deformation than PU because tetraaniline functions as a chain holder. The thermogravimetric analytic (TGA) results reveal that TAPU has lower T _d, smaller T _mw1 and T _mw2, and higher char yield because the dehydration of the urea-containing polymer produces a thin layer from a nitrogen compound on the polymer’s surface, which insulates the underlying polymer from heat and oxygen.     

The utilization of TG/GC/MS in the establishment of the mechanism of poly(styrene) degradation

General purpose poly(styrene) is a large volume commodity polymer used in a variety of applications. It is widely used in food packaging, particularly for baked goods. In this application, the presence of styrene monomer, which has a distinctive taste and aroma, cannot be tolerated. Processing of the polymer and forming of the food container at an unacceptably high temperature leads to the formation of styrene monomer and finished articles with unacceptable aroma characteristics. An examination of the thermal degradation of poly(styrene) has revealed the origin of monomer formation. The thermal decomposition of poly(styrene) has been widely studied. However, most studies have been carried out at high temperature (>300°C) where many processes are occurring simultaneously. Degradation at lower temperature, 280°C, occurs in two well-defined steps. The first is thermolysis of a head-to-head bond present in the mainchain as a consequence of polymerization termination by radical coupling. This generates macroradicals which smoothly depolymerize to expel styrene monomer. The nature of the degradation is readily apparent from kinetic analysis of the isothermal thermogravimetry (TG) data and the identity of the single volatile product may be readily established by gas chromatography/mass spectrometry (GC/MS) analysis of the effluent from the TG analysis.     

干／湿相转换法制备聚芳醚砜致密皮层不对称膜

以聚芳醚砜为膜材料，采用干／湿相转换法．在非挥发性溶剂－挥发性添加剂以及挥发性溶剂／共溶剂－弱挥发性添加剂两种溶剂体系中研究了致密皮层不对称膜的制备和形成条件，并对它们的结构及氮、氢气体透过性能进行了测试。结果表明，采用前一种溶剂体系。虽然可以在一定范围内控制膜平均孔径的变化，却难以得到致密皮层不对称膜。而后一种溶剂体系，在控制铸膜液组成、适当的制膜条件下可以得到具有海绵状支撑结构的不对称气体分离膜。     

Further study of the viscoelastic phase separation of cyanate ester modified with poly(ether imide)

In this study, the viscoelastic phase separation process was studied further by time‐resolved light scattering, differential scanning calorimetry, and scanning electron microscopy in the system of poly(ether imide)‐modified bisphenol‐A dicyanate. It was observed that the evolution time of phase structure and relaxation time of diffusion flow of the bisphenol‐A dicyanate were similar with the phase diagram of curing conversion versus content of PEI. The results suggested that the viscoelastic phase separation was affected by the curing conversion of the system at the onset point of phase separation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 517–523, 2006     

干相转换条件对致密皮层不对称膜结构及透气性能的影响

研究了挥发时间、温度等干相转换条件对聚芳醚砜致密皮层不对称膜形态结构、有效皮层厚度及氮、氢透过性能的影响．表明采用本铸膜液体系，在２０℃左右，很短的挥发时间内即可制得较理想的气体分离膜。     

Structure of interpenetrating polymer networks

A possible model for the formation of interpenetrating polymer networks is suggested. Phase separation is assumed to be faster than gelation. This implies that domains rich in either component grow first until late stages of spinodal decomposition. In these domains, short linear chains are crosslinked, leading to large branched macromolecules. Growth of the domains is slowed down by the presence of crosslinked polymers. It is assumed that it is stopped when the sizes of the domains and of the branched macromolecules are comparable. The resulting domains are significantly larger than the average distance between crosslinks. These results are supported by recent neutron scattering results on a poly(carbonate-urethane)/polyvinyl pyridine interpenetrating network. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1507–1512, 1998     

Preparation and characterization of waterborne poly(urethane urea) with well‐defined hard segments

A series of polyester‐based poly(urethane urea) (PUU) aqueous dispersions with well‐defined hard segments were prepared from polyester polyol, 4,4′‐diphenylmethane diisocyanate, dimethylolpropionic acid, 1,4‐butanediol, isophorone diisocyanate, and ethylenediamine. These anionic‐type aqueous dispersions had good dispersity in water and were stable at the ambient temperature for more than 1 year. For these aqueous dispersions, the particle size decreased as the hard‐segment content increased, and the polydispersity index was very narrow (<1.10). Films prepared with the PUU aqueous dispersions exhibited excellent waterproof performance: the amount of water absorption was as low as 5.0 wt %, and the contact angle of water on the surface of this kind of film was as high as 103° (this led to a hydrophobic surface). The water‐resistant property of these waterborne PUU films could be well correlated with some crystallites and ordered structures of the well‐defined hard segments formed by hydrogen bonding between the urethane/urethane groups and urethane/ester groups, as well as the degree of microphase separation between the hard and soft segments in the PUU systems. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2606–2614, 2005     

A DSC study of miscibility and phase separation in crystalline polymer blends of phenolphthalein poly(ether ether sulfone) and poly(ethylene oxide)

The miscibility of blends of phenolphthalein poly(ether ether sulfone) (PES-C) and poly(ethylene oxide) (PEO) was established on the basis of the thermal analysis results. Differential scanning calorimetry (DSC) studies showed that the PES-C/PEO blends prepared by casting from N,N-dimethylformamide (DMF) possessed a single, composition-dependent glass transition temperature (T_g), and thus that PES-C and PEO are miscible in the amorphous state at all compositions at lower temperature. At higher temperature, the blends underwent phase separation, and the PES-C/PEO blend system was found to display a lower critical solution temperature (LCST) behavior. The phase separation process in the blends has also been investigated by using DSC. Annealed at high temperatures, the PES-C/PEO blends exhibited significant changes of thermal properties, such as the enthalpy of crystallization and fusion, temperatures of crystallization and melting, depending on blend composition when phase separation occurred. These changes reflect different characteristics of phase structure in the blends, and were taken as probes to determine phase boundary. From both the thermal analysis and optical microscopy, the phase diagram of the blend system was established. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1383–1392, 1997     

Biocompatibility of poly(carbonate urethane)s with various degrees of nanophase separation

Nanophase separation has been suggested to influence the biological performance of polyurethane. In a previous work, six different 4,4'-diphenylmethane diisocyanate (MDI)-based poly(carbonate urethane)s (PCUs) that exhibited various degrees of nanophase separation were synthesized and characterized. In the present work, these PCUs were used as a model system to study the effect of nanometric structures on the biocompatibility of polyurethane. Human blood platelet activation, monocyte activation, protein adsorption, and bacterial adhesion on PCU were investigated in vitro. It was found that human blood platelets as well as monocytes were less activated on the PCU surfaces with a greater degree of nanophase separation in general. This phenomenon was closely associated with the lower ratio of human fibrinogen/albumin competitively adsorbed on these surfaces. Bacterial adhesion was also inhibited in some nanophase-separated PCUs. [diagram in text].