Controlled synthesis of new amphiphilic glycopolymers with liquid crystal grafts

A cholesterol‐based liquid crystal monomer, diethylene glycol cholesteryl ether acrylate (DEGCholA), has been successfully polymerized by atom transfer radical polymerization (ATRP) for the first time. Appropriate experimental conditions to control the polymerization of DEGCholA have been investigated using a model initiator (ethyl 2‐bromoisobutyrate) in tetrahydrofuran (THF) or toluene at 60 °C. Well‐controlled ATRP of DEGCholA was obtained using N,N,N′,N′,N″‐pentamethyldiethylenetriamine as ligand in THF at 60 °C. These conditions were then applied to initiate the ATRP of DEGCholA from multifunctional macroinitiators based on dextran. Using a protection/deprotection synthetic scheme, novel graft glycopolymers (Dex‐g‐PDEGCholA) have been synthesized. The mesomorphic properties of DEGCholA, PDEGCholA, and Dex‐g‐PDEGCholA have been studied by thermal polarizing optical microscopy, differential scanning calorimetry, and X‐ray scattering. PDEGCholA and Dex‐g‐PDEGCholA show an interdigitated smectic A phase (SmA_d) between T_g (～30 °C) and around 170 °C. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3829–3839     

酶促开环聚合合成双亲性H型嵌段共聚物及其自组装

通过固定化酶Novozyme435（NV435）催化聚乙二醇（PEG）开环聚合己内酯（CL）得到端基带有羟基的ABA型三嵌段聚合物,用2,2-二氯代乙酰氯将聚合物的端羟基功能化形成H型大分子引发剂,在CuCl／HMTETA体系中引发4-乙烯基吡啶（4VP）进行原子转移自由基聚合反应（ATRP）,得到了具有两亲性的H型五嵌段聚合物（PVP）2-b—PCL-b．PEG-PCL-（PVP）2,用红外光谱（FT IR）,核磁共振（^1H NMR）,凝胶渗透色谱（GPC）对其结构与分子量及其分子量分布进行了表征,结果表明：H型五嵌段聚合物分子量46121g／mol,分子量分布1．30．并利用动态光散射（DLS）和原子力显微镜（AFM）对聚合物在水溶液中的自组装行为进行了研究,H型嵌段聚合物的胶束呈球形结构,平均直径为70nm左右．     

Metal-free synthesis of reactive oligomers by ring-opening oligomerization of glycidyl phenyl ether initiated with tetra-n-butylammonium fluoride in the presence of various protic compounds

Metal-free ring-opening oligomerizations of glycidyl phenyl ether (GPE) were performed with tetra-n-butylammonium fluoride (n-Bu₄NF) as an initiator in the presence of protic compounds (RHs) as chain transfer agents (CTAs). The RHs having pKa between 4.66 and 15.5 enabled to serve as the CTA in this oligomerization system, leading to reactive oligomers with relatively controlled molecular weights having narrow molecular weight distributions bearing functional groups such as alkene, benzyl ether, alkyne, ester and methacrylate groups at initiating end.     

Short chain amphiphilic diblock co‐oligomers via RAFT polymerization

We demonstrate the ability of the reversible addition‐fragmentation chain transfer (RAFT) process to produce well‐defined block co‐oligomers for which each block has a narrow molecular weight distribution and degrees of polymerization ranging from 2 to 33. We exploit RAFT versatility to control the structure of the co‐oligomers and produce amphiphilic block co‐oligomers of styrene, acrylic acid and ethylene glycol. A detailed study shows that the amphiphilic diblock co‐oligomers self‐assemble in solution and form micelles or particles, depending on the hydrophobicity of the diblock. These oligomers present an excellent alternative to traditional amphiphilic molecules, by combining the properties of polymers with those of single molecule surfactants. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Micellar polymerization of amphiphilic poly(vinyl alcohol) macromonomer having a methacrylate end group prepared by aldol‐type group‐transfer polymerization

Amphiphilic and heterotactic‐rich poly(vinyl alcohol) (PVA) macromonomer, that is, PVA having a phenyl or phenoxyethyl methacrylate unit as the polymerizable end group, was synthesized via the aldol‐type group‐transfer polymerization (aldol‐GTP) technique. Aldol‐GTPs of vinyloxytriethylsilane (VOTES) were carried out in dichloromethane with 4‐methacryloylbenzaldehyde and 4‐(2‐methacryloylethoxy)benzaldehyde as the initiators with various Lewis acids. The polymerizations proceeded smoothly to give silylated PVA macromonomers (number‐average molecular weights: 1.3 × 10³–1.96 × 10⁴). Poly(VOTES) was easily desilylated to give heterotactic‐rich PVA macromonomer in good yield. The critical micelle concentration of the PVA macromonomer was determined by surface‐tension measurement. Micellar polymerization of the amphiphilic macromonomer gave comb‐shaped (graft) polymer having PVA side chains effectively (conversion: 80–82%), whereas polymerization in dimethyl sulfoxide (homogeneous state) did not. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4477–4484, 2002     

Novel thermoresponsive water-soluble oligomers based on amphiphilic calixresorcinarenes

Novel water-soluble thermoresponsive oligomers TO1 and TO2 were obtained by reaction of amidoamine tetramethylcalixresorcinarenes (C1) and tetrapentylcalixresorcinarenes (C5) with ethylene glycol diglycidyl ether. The compounds were characterised by ¹H and FT-PGSE NMR, FTIR, static light scattering and elemental analysis. The thermoresponsive properties of oligomers were investigated by spectrophotometry, DLS, FT-PGSE NMR and TEM. The cloud points of oligomers (43 °C for TO1 (5 mg/ml) and 41 °C for TO2 (1.2 mg/ml), respectively) were determined. The influence of salts effect on TO2 cloud points was investigated. The binding of anti-inflammatory drug naproxen (Nap) at 20 °C by TO1 and TO2 and its partial release at cloud points of oligomers in aqueous solution are observed using fluorescence and FT-PGSE NMR methods. New example of creating of thermoresponsive macrocyclic systems on the basis of amidoamine calixresorcinarenes with possibility of substrate binding and release under the influence of termo-stimuli in an aqueous solution was shown.     

Synthesis and properties of an amphiphilic dithiafulvene oligomer

An amphiphilic dithiafulvene oligomer was synthesized by cycloaddition polymerization of aldothioketene generated from 1,4‐diethynylbenzene and a PEO‐grafted phenylacetylene (feed ratio 5/1). The degree of polymerization was determined as 6 by ¹H NMR analysis. The aggregation behavior of the oligomer was studied in the mixed solvent of D₂O and DMSO‐d₆. Effective charge‐transfer interaction of the oligomer and hydrophilic methyl viologen was observed in an aqueous solution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3770–3775, 2007     

新型线状-树枝状两亲嵌段共聚物的合成

本文设计合成了一系列由不同链长的聚丙烯酸(PAA)为亲水嵌段和不同代数聚苄醚树枝体(Dendr.PBE)为疏水嵌段的杂化共聚物(PAA-Dendr.PBE)。     

Synthesis of telechelic oligomers by atom transfer radical polymerization: A study of acrylate monomers

Different acrylate oligomers were synthesized by atom transfer radical polymerization in the presence of a transfer agent and CuBr/1,1,4,7,10,10‐hexamethyltriethylenetetramine. The functionality in bromine was determined by ¹H NMR. These oligomers were coupled in the presence of Cu⁽⁰⁾ and the ligand 2,2′‐bipyridine. The coupling yield was determined by size exclusion chromatography and NMR analysis and depended on the nature of the monomer and not on the molecular weight. In other words, the preliminary functionalization of the brominated chain end with styrene increased the coupling yield. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2377‐2394, 2005     

Synthesis and characterization of hyperbranched amphiphilic block copolymers prepared via self‐condensing RAFT polymerization

Four families of hyperbranched amphiphilic block copolymers of styrene (Sty, less polar monomer) and 2‐vinylpyridine (2VPy, one of the two more polar monomers) or 4‐vinylpyridine (4VPy, the other polar monomer) were prepared via self‐condensing vinyl reversible addition‐fragmentation chain transfer polymerization (SCVP‐RAFT). Two families contained 4VPy as the more polar monomer, one of which possessing a Sty‐b‐4VPy architecture, and the other possessing the reverse block architecture. The other two families bore 2VPy as the more polar monomer and had either a 2VPy‐b‐Sty or a Sty‐b‐2VPy architecture. Characterization of the hyperbranched block copolymers in terms of their molecular weights and compositions indicated better control when the VPy monomers were polymerized first. Control over the molecular weights of the hyperbranched copolymers was also confirmed with the aminolysis of the dithioester moiety at the branching points to produce linear polymers with number‐average molecular weights slightly greater than the theoretically expected ones, due to recombination of the resulting thiol‐terminated linear polymers. The amphiphilicity of the hyperbranched copolymers led to their self‐assembly in selective solvents, which was probed using atomic force microscopy and dynamic light scattering, which indicated the formation of large spherical micelles of uniform diameter. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1310–1319     

Controlled synthesis of amphiphilic block copolymers based on poly(isobutylene) macromonomers

The synthesis of a monoacrylate functionalized poly(isobutylene) (PIB) macromonomer (PIBA) has been achieved by a two‐step reaction starting from a commercially available PIB. Firstly, terminal olefins (vinylidene and trisubstituted olefin) of PIB were transformed to a phenolic residue by Friedel‐Crafts alkylation followed by subsequent esterification of the phenol with acryloyl chloride, catalyzed by triethylamine. PIBA structure was confirmed by ¹H‐NMR, ¹³C‐NMR and GPC before utilizing in the RAFT copolymerization with N,N‐dimethylacrylamide (DMA) to obtain statistical copolymers (P[(DMA‐co‐(PIBA)]). Monomer conversions were consistently higher than 85% for both DMA and PIBA as monomer feed composition was varied. Chain extension of poly(N,N‐dimethylacrylamide) with PIBA to synthesize block copolymers (P[(DMA‐b‐(PIBA)]) was also achieved with near quantitative monomer conversions (>97%). Block formation efficiency was not quantitative but purification of block copolymers was possible by selective precipitation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 634–643     

P(OEGMA-co-LMA) hyperbranched amphiphilic copolymers as self-assembled nanocarriers

We report on the synthesis of novel amphiphilic hyperbranched copolymers, namely Hyperbranched-[poly (ethylene glycol) methyl ether methacrylate-co-lauryl methacrylate] (H-[P(OEGMA-co-LMA)]), obtained by reversible addition-fragmentation chain transfer (RAFT) polymerization utilizing the divinyl monomer, ethylene glycol dimethacrylate (EGDMA) as the branching agent. Molecular characterization by size exclusion chromatography (SEC) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy indicated the success of the polymerization. The self-assembly behavior in aqueous media was investigated by light scattering techniques and fluorescence spectroscopy. The hyperbranched copolymers form multimolecular aggregates of nanoscale dimensions with a low critical aggregation concentration. In addition, the model hydrophobic drug, curcumin (CUR), known also for its intrinsic fluorescence properties, was used in order to investigate the H-[P(OEGMA-co-LMA)] copolymers drug encapsulation ability. Curcumin is successfully loaded into the polymeric nanoparticles, as confirmed by dynamic light scattering and UV–Vis spectroscopy. Interestingly, curcumin hydrophobic interactions with the hyperbranched copolymers result in more well-defined co-assembled nanostructures, in terms of size and size distribution. The mixed copolymer-CUR nano-assemblies consist of small size nanoparticles (<100 nm) which exhibit relatively high size uniformity, colloidal stability and fluorescent properties. Overall, results signify that the biocompatible H-[P(OEGMA-co-LMA)] nanostructures could potentially serve as nanocarrier systems for drug delivery and bio-imaging applications.     

Synthesis and testing of new end-functionalized oligomers for molecular electronics

Several new classes of oligomers have been synthesized with functionalities designed to aid in the understanding of molecular device behavior, specifically when molecules are interfaced between proximal electronic probes. The compounds synthesized are series of azobenzenes, bipyridines and oligo(phenylene vinylene)s that bear acetyl-protected thiols for ultimate attachment to metallic surfaces. Some initial electrochemical and solid-state test results are also reported.     

Facile synthesis of amphiphilic gels by frontal free‐radical polymerization

We report a new facile strategy for quickly synthesizing poly(2‐hydroxyethyl acrylate‐co‐vinyl versatate) amphiphilic gels with excellent physicochemical properties by frontal free‐radical polymerization. The appropriate amounts of 2‐hydroxyethyl acrylate, vinyl versatate (VeoVa 9) and ammonium persulfate initiator were mixed together at ambient temperature in the presence of N‐methyl‐2‐pyrrolidone as the solvent medium. Frontal polymerization (FP) was initiated by heating the wall of the tube with a soldering iron. Once initiated, no further energy was required for the polymerization to occur. The dependence of the front velocity and front temperature on the initiator concentration was investigated. The front temperatures were between 132 and 157 °C, depending on the initiator concentration. The morphology, swelling rate, and swelling behavior of amphiphilic gels prepared via FP were comparatively investigated on the basis of scanning electron microscopy, water contact angle, and swelling measurements. Results show that the amphiphilic gels prepared via FP behave with good swelling capacity both in water and organic solvents. The FP can be exploited as an alternative means for synthesis of amphiphilic gels with additional advantages of fast and efficient way. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 823–831, 2010     

Effect of styrene oligomers on syndiospecific polymerization of styrene

Styrene oligomers, preferentially consisting of styrene dimers and trimers, are formed by a free radical mechanism at the thermal polymerization of stabilizer-free styrene during storage and at higher polymerization temperatures. The identity of several dimer and trimer fractions formed in such a free radical polymerization, their influence on a coordinative polymerization reaction, the syndiospecific polymerization of styrene, as well as their effect on the properties of the resulting polymers has been investigated.Styrene dimers and styrene trimers reduce the polymerization activity of the transition metal catalyst significantly, especially at low amounts of oligomers added to the styrene. This behavior is discussed with respect to a proposed mechanism involving complexation of the active transition metal species with the specific oligomer instead of the styrene monomer, resulting in increased steric hindrance towards insertion of a styrene molecule to the active site.Both oligomers reduce the molecular weight of the syndiotactic polystyrene, by acting as chain-transfer agents. The constancy of the polydispersity over the whole concentration range of added dimer or trimer indicates that the uniformity of the active sites of the coordinative polymerization is not significantly influenced by the presence of the oligomers.The thermal properties of the polymers demonstrate that the oligomers do not affect the high syndiospecificity of the active catalytic sites, whereas the increase in crystallization temperature with increasing amounts of styrene dimer or trimer is comparable to effects observed by the addition of crystallization nucleators to semicrystalline polymers.     

Lipase-catalyzed ring-opening polymerization of molecularly pure cyclic oligomers for use in synthesis and chemical recycling of aliphatic polyesters

The lipase-catalyzed ROP of molecularly pure cyclic oligomers with a definite degree of oligomerization is analyzed with respect to the molecular weights of the resulting polymers and certain kinetic parameters of the enzymatic reaction. Cyclic BA dimers, trimers, and tetramers polymerize faster than the equivalent monomer; however, the latter produces PBA of significantly higher molecular weight. The reason is that the ring opening of the cyclic monomer is slow, leading to a lower initiator concentration than that produced by the cyclic BA dimer and trimer. Similarly, the cyclic BS dimer produces PBS of higher molecular weight than that obtained from the cyclic BS trimer.     

Controlled radical polymerization of tert‐butyl acrylate at ambient temperature: Effect of initiator structure and synthesis of amphiphilic block copolymers

Controlled and very rapid ambient temperature polymerization of tert‐butyl acrylate (tBA) via atom transfer radical polymerization (ATRP) and single electron transfer living radical polymerization (SET‐LRP) conditions is reported. Two initiators, one that would generate a secondary radical and another that would generate a primary radical, upon activation, are used. A very active catalyst CuBr/Me₆TREN was found to initiate rapid polymerization whether it was the primary or the secondary initiator. The polymerization was well controlled and very rapid. The initiator that produces secondary initiating site is found to result in more rapid polymerization than the one that produces primary initiating site. To explore the possibility of rapid ambient temperature polymerization through the SET‐LRP mechanism, the polymerization was also carried out in the presence of DMSO. It was found that the polymerization was much faster compared to the bulk ATRP, without loss of control. Styrene was block copolymerized from PtBA macroinitiators and vice versa. In both the cases, block copolymers with controlled molecular weights were obtained. The tBA block of the polymer was selectively hydrolyzed to get amphiphilic block copolymers. This amphiphilic block copolymer was found to be useful in preparing stable cadmium sulfide (CdS) nanoparticulate dispersion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,characterization, and modification of poly(tert-butyl methacrylate-b-alkyl methacrylate-b-tert-butyl methacrylate) by group transfer polymerization

Different poly(tert-butyl methacrylate) (PTBMA)-poly(alkyl methacrylate) (PAMA, alkyl=CH₃, n-C₄H₉) triblock copolymers were synthesized by group transfer polymerization. They were obtained by first preparing “living” PAMA using a difunctional initiator, followed by polymerization of TBMA in THF at room temperature, in the presence of a nucleophilic catalyst. The segment molecular weights and compositions of TBMA segment could be controlled by regulating the feed ratio of two monomers and the ratio of monomer to initiator. As supported by ¹H-NMR, IR analysis, and titration, the PTBMA blocks could be quantitatively hydrolyzed into poly(methacrylic acid) (PMAA) blocks whereas the PAMA blocks were not hydrolyzed. The water-soluble amphiphiles prepared by neutralization of the PMAA block displayed surface-active behavior in water, which was characterized by a critical micelle concentration. The thermogravimetric analysis demonstrated the loss of tert-butyl groups. © 1992 John Wiley & Sons, Inc.     

Synthesis of cyclic methacrylic acid oligomers by atom transfer radical polymerization

Poly(methacrylic acid) (PMAA) oligomers were synthesized by combining template polymerization and copper‐mediated atom transfer polymerization with multivinyl monomer of β‐cyclodextrin (CD) having 20.4 methacryloyl groups on both primary and secondary hydroxyl group sides of CD scaffold, with 1,3‐dibromobutane as an initiator. The initiation and propagation sites of polymerized sequence of β‐CD were connected by postpolymerization of polymerized products with CuBr and tris[(2‐dimethylamino)ethyl]amine (Me₆TREN) in a methanol/water mixture of 10 wt % of water. Polymerized and cyclized sequences, PMAA oligomers formed on the primary and the secondary hydroxyl group sides, were detached from β‐CD scaffold by hydrolysis. Molecular weights of PMAA oligomers were measured by GPC and matrix assisted laser desorption ionization time‐of‐flight mass measurement. By ¹H NMR measurements, it was found that three types of cyclic PMAA were obtained by postpolymerization. The cyclization preferentially occurred on the secondary hydroxyl group side than on the primary hydroxyl group side. From the structures of cyclic PMAA, two reaction positions were proposed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6262–6271, 2005