Synthesis of novel macromonomers and telechelics of poly(2-alkyl-2-oxazoline)s

Novel macromonomers and telechelics of poly(2-alkyl-2-oxazoline) (PROZO) were syn-thesized by utilizing termination of propagating species (2-oxazolinium ions) in the living polymerization of 2-alkyl-2-oxazoline (ROZO) with suitable nucleophiles. Two types of p-vinylbenzyl–type macromonomers were obtained by terminating living PROZO with sodium p-vinylbenzyl alkoxide or with sodium p-vinylbenzyl mercaptide. The synthesis of telechelics having a functional group (SH, COOH) on both ends of PROZO was achieved by using a bis(2-oxazolinium salt) initiator. The PROZO dithiol was synthesized by two methods: (1) termination of the living species on both ends with NaSH, and (2) aminolysis of PROZO bis(O-ethyldithiocarbonate) given by treatment of the living PROZO with potassium O-ethyldithiocarbonate. Termination of the living PROZO with the sodium salt of di-t-butyl malonate yielded a PROZO with di-t-butyl malonate moieties on both polymer ends, from which the PROZO dicarboxylic acid was derived via free tetracarboxylic acid. © 1995 John Wiley & Sons, Inc.     

Effect of pendant groups on the blood compatibility and hydration states of poly(2-oxazoline)s

Poly(2-methyl-2-oxazoline) (PMeOx), poly(2-ethyl-2-oxazoline) (PEtOx), poly(2-n-butyl-2-oxazoline) (PBuOx), and poly(2-phenyl-2-oxazoline) (PPhOx) are selected as poly(2-oxazoline) (POX) models to study the effect of pendant groups on their blood compatibility and hydration states. A comprehension of this can provide a perspective for understanding the biocompatibility of PMeOx and PEtOx in water-polymer interactions and may inspire the development of novel blood-compatible POX derivatives. The aforementioned four POXs are grafted onto glass substrates via photo-grafting, and their blood compatibility is estimated via platelet adhesion and the degree of denaturation of the adsorbed fibrinogen. The hydration states of the POXs are investigated using differential scanning calorimetry and attenuated total reflection infrared spectroscopy. Intermediate water is found to be present in hydrated PMeOx and PEtOx, but is observed to be scarce in hydrated PBuOx and PPhOx. This could be the reason for the biocompatibility of PMeOx and PEtOx. The carbonyl groups in PMeOx and PEtOx can be fully hydrated. However, in PBuOx and PPhOx, water mainly exists as bulk water. The hydration of the carbonyl groups is hindered by the bulky side chains, and IW cannot be generated.     

Preparation and properties of poly(alkyl vinyl ether-2-ethyl-2-oxazoline) diblock copolymers

A method for the synthesis of well-defined poly(alkyl vinyl ether–2-ethyl-2-oxazoline) diblock copolymers with hydrolytically stable block linkages has been developed. Monofunctional poly(alkyl vinyl ether) oligomers with nearly Poisson molecular weight distributions were prepared via a living cationic polymerization method using chloroethyl vinyl ether together with HI/ZnI₂ as the initiating system and lithium borohydride as the termination reagent. Using the resultant chloroethyl ether functional oligomers in combination with sodium iodide as macroinitiators, 2-ethyl-2-oxazoline was polymerized in chlorobenzene/NMP to afford diblock copolymers. A series of poly(methyl vinyl ether–2-ethyl-2-oxazoline) diblock materials were found to have polydispersities of ≈ 1.3–1.4 and are microphase separated as indicated by two T_g's in their DSC thermograms. These copolymers are presently being used as model materials to study fundamental parameters important for steric stabilization of dispersions in polar media. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of aromatic poly(ether sulfone imide)s derived from sulfonyl bis(ether anhydride)s and aromatic diamines

Two sulfonyl group-containing bis(ether anhydride)s, 4,4′-[sulfonylbis(1,4-phenylene)dioxy]diphthalic anhydride ( IV ) and 4,4′-[sulfonylbis(2,6-dimethyl-1,4-phenylene)dioxy]diphthalic anhydride (Me- IV ), were prepared in three steps starting from the nucleophilic nitrodisplacement reaction of the bisphenolate ions of 4,4′-sulfonyldiphenol and 4,4′-sulfonylbis(2,6-dimethylphenol) with 4-nitrophthalonitrile in N,N-dimethylformamide (DMF). High-molar-mass aromatic poly(ether sulfone imide)s were synthesized via a conventional two-stage procedure from the bis(ether anhydride)s and various aromatic diamines. The inherent viscosities of the intermediate poly(ether sulfone amic acid)s were in the ranges of 0.30–0.47 dL/g for those from IV and 0.64–1.34 dL/g for those from Me- IV. After thermal imidization, the resulting two series of poly(ether sulfone imide)s had inherent viscosities of 0.25–0.49 and 0.39–1.19 dL/g, respectively. Most of the polyimides showed distinct glass transitions on their differential scanning calorimetry (DSC) curves, and their glass transition temperatures (T_g) were recorded between 223–253 and 252–288°C, respectively. The results of thermogravimetry (TG) revealed that all the poly(ether sulfone imide)s showed no significant weight loss before 400°C. The methyl-substituted polymers showed higher T_g's but lower initial decomposition temperatures and less solubility compared to the corresponding unsubstituted polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1649–1656, 1998     

New poly (amide-imide) syntheses. IX. Preparation and properties of poly(amide-imide)s derived from 2,7-bis (4-aminophenoxy) naphthalene and various bis (trimellitimide)s

Eleven bis(phenoxy) naphthalene-containing poly(amide-imide)s IIIa–k were synthesized by the direct polycondensation of 2,7-bis (4-aminophenoxy) naphthalene (DAPON) with various aromatic bis (trimellitimide)s IIa–k in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Poly (amide-imide)s IIIa–k having inherent viscosities of 0.70–1.12 dL/g were obtained in quantitative yields. The polymers containing p-phenylene or bis(phenoxy) benzene units exhibited crystalline x-ray diffraction patterns. Most of the polymers were readily soluble in various solvents such as NMP, N, N-dimethylacetamide, dimethyl sulfoxide, m-cresol, o-chlorophenol, and pyridine, and gave transparent, and flexible films cast from DMAc solutions. Cast films showed obvious yield points in the stress-strain curves and had strength at break up to 87 MPa, elongation to break up to 11%, and initial modulus up to 2.10 GPa. These poly(amide-imide)s had glass transition temperatures in the range of 255–321°C, and the 10% weight loss temperatures were recorded in the range of 529–586°C in nitrogen. The properties of poly(amideimide)s IIIa–k were compared with those of the corresponding isomeric poly (amide-imide)s III′ prepared from 2,7-bis(4-trimellitimidophenoxy) naphthalene and aromatic diamines. © 1994 John Wiley & Sons, Inc.     

Synthesis of high molecular weight poly(ether ketone)s by polycondensation of activated bis(aryl chloride)s with bisphenolates

The ability to achieve high molecular weight poly(ether ketone)s from the polycondensation of bis(aryl chloride)s with bis(phenolate)s has been consistently demonstrated. The polymerizations presented here help to delineate for specific bis(aryl chloride)/bisphenolate pairs the reaction conditions required to obtain high molecular weight polymers. Polycondensation of 1,3-bis(4-chlorobenzoyl)-5-tert-butylbenzene ( 6 ) and 2,2′-bis(4-chlorobenzoyl)-biphenyl ( 15 ) with various bisphenolates as well as of 2,2′-bis(4-hydroxyphenoxy)biphenyl ( 33 ) with 4,4′-dichlorobenzophenone ( 41 ) and 1,3-bis(4-chlorobenzoyl)benzene ( 43 ) were used as representative model systems to select reaction conditions that led to high molecular weight polymers. © 1995 John Wiley & Sons, Inc.     

Poly(2-oxazoline)-Containing Triblock Copolymers: Synthesis and Applications

This review focuses on poly(2-oxazoline) containing triblock copolymers and their applications. A detailed overview of the synthetic techniques is provided. Triblock copolymers solely based on poly(2-oxazoline)s can be synthesized by sequential monomer addition utilizing mono- as well as bifunctional initiators for the cationic ring-opening polymerization of 2-oxazolines. Crossover and coupling techniques enable access to triblock copolymers comprising, e.g., polyesters, poly(dimethylsiloxane)s, or polyacrylates in combination with poly(2-oxazoline) based segments. Besides systematic studies to develop structure property relationships, these polymers have been applied, e.g., in drug delivery, as (functionalized) vesicles, in segmented networks or as nanoreactors.     

Synthesis and properties of poly(ether imide)s based on the bis(ether anhydride)s from hydroquinone and its derivatives

Four bis(ether anhydride)s, 4,4′‐(1,4‐phenylenedioxy)diphthalic anhydride (IV), 4,4′‐(2,5‐tolylenedioxy)‐diphthalic anhydride (Me‐IV), 4,4′‐(2‐chloro‐1,4‐phenylenedioxy)diphthalic anhydride (Cl‐IV), and 4,4′‐(2,5‐biphenylenedioxy)diphthalic anhydride (Ph‐IV), were prepared in three steps starting from the nucleophilic nitrodisplacement reaction of 4‐nitrophthalonitrile with the potassium phenoxides of hydroquinone and various substituted hydroquinones such as methylhydroquinone, chlorohydroquinone, and phenylhydroquinone in N,N‐dimethylformamide, followed by alkaline hydrolysis and dehydration. Four series of poly(ether imide)s were prepared from bis(ether anhydride)s with various aromatic diamines by a classical two‐step procedure. The inherent viscosities of the intermediate poly(amic acid)s were in the range of 0.40–2.63 dL/g. Except for those derived from p‐phenylenediamine and benzidine, almost all the poly(amic acid)s could be solution‐cast and thermally converted into transparent, flexible, and tough polyimide films. Introduction of the chloro or phenyl substituent leads to a decreased crystallinity and an increased solubility of the polymers. The glass transition temperatures (T_g) of these polyimides were recorded in the range of 204–263°C. In general, the methyl‐ and chloro‐substituted polyimides exhibited relatively higher T_gs, whereas the phenyl‐substituted ones exhibited slightly lower T_gs compared to the corresponding nonsubstituted ones. Thermogravimetric analysis (TG) showed that 10% weight loss temperatures of all the polymers were above 500°C either in nitrogen or in air. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 665–675, 1999     

基于聚(2-甲基-2-噁唑啉)和聚丙烯酸的混合刷在毛细管电泳在线富集溶菌酶中的应用

制备了一种对溶菌酶具有可控吸附性能的混合刷涂层毛细管,用于毛细管电泳在线富集溶菌酶以提高其检测灵敏度。首先,分别通过阳离子开环聚合和可逆加成-断裂链转移（RAFT）聚合合成聚（2-甲基-2-噁唑啉）（PMOXA）和聚丙烯酸（PAA）,然后将甲基丙烯酸缩水甘油酯（GMA）分别与PMOXA和PAA通过自由基共聚和RAFT聚合合成出聚（2-甲基-2-噁唑啉）-r-甲基丙烯酸缩水甘油酯（PMOXA-r-GMA）和聚丙烯酸-b-聚甲基丙烯酸缩水甘油酯（PAA-b-PGMA）。将PMOXA-r-GMA和PAA-b-PGMA的混合溶液以一定比例加入到毛细管内,通过加热即可制备出基于PMOXA和PAA的混合刷涂层毛细管。X射线光电子能谱（XPS）对毛细管原材料的表面组成研究结果表明,当混合溶液质量浓度为20 g/L、PMOXA-r-GMA和PAA-b-PGMA质量比为1：1时,所得涂层中羧基的含量随着PAA链长的增加而增加;异硫氰酸荧光素标记溶菌酶（FITC-溶菌酶）吸附实验结果显示,通过改变环境的pH和离子强度（I）可以调控涂层毛细管对溶菌酶的吸附和释放,在pH 7（I=10^-5mol/L）条件下,毛细管可以吸附大量的溶菌酶,当条件变为pH 3（I=10^-1mol/L）时,吸附的溶菌酶可以被释放出来。将这种具有溶菌酶可控吸附性能的涂层毛细管用于毛细管电泳在线富集溶菌酶,当PAA链长是PMOXA链长的2.2倍时,溶菌酶的灵敏度增强因子为17.69,检出限为8.7×10^-5g/L;同一天内对溶菌酶连续测定5次以及连续测定5天,峰面积的日内、日间相对标准偏差（RSD）分别为2.9%和4.1%,迁移时间的日内、日间RSD分别为0.9%和2.1%。涂层的制备只需一步,简单易行,而且涂层具有很好的稳定性。本研究为毛细管电泳分析痕量蛋白质提供了一种简单有效的方法。     

Preparation of micron-size monodisperse polymer particles by dispersion copolymerization of styrene with poly(2-oxazoline) macromonomer

This article describes the preparation of micron-size monodisperse polymer particles by dispersion copolymerization of styrene with a poly(2-oxazoline) macromonomer in an aqueous ethanol solution. The macromonomer acted as a comonomer as well as a stabilizer. The diameter of the particles increased as the concentration of the macromonomer decreased. The higher the molecular weight of the macromonomer, the smaller the particle size. The copolymerization in the solvent containing higher water content gave smaller polymer particles. Under the condition giving the monodisperse particles, the particles volume increased linearly with the yield of the particles. From ESCA analysis of the particle surface, poly(2-oxazoline) chains were enriched on the surface. © 1993 John Wiley & Sons, Inc.     

New poly(amide-lmide)s syntheses. XV. Preparation and properties of poly(amide-imide)s derived from 9, 9-bis[4-(4-aminophenoxy) phenyl]fluorene and various bis(trimellitimide)s

Fifteen bis(phenoxy) fluorene-containing poly(amide-imide)s III were synthesized by the direct polycondensation of 9,9-bis[4-(4-aminophenoxy)phenyl]fluorene (BAPPF) with var-ious aromatic bis(trimellitimide)s II in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Poly(amide-imide)s III having inherent vis-cosities up to 1.45 dL/g were obtained in quantitative yields. Most of the resulting polymers showed an amorphous nature and were readily soluble in polar solvents such as NMP and N,N-dimethylacetamide. All the soluble poly(amide-imide)s afforded transparent, flexible, and tough films. The glass transition temperatures of these polymers were in the range of 263–315°C and the 10% weight loss temperatures were above 510°C in nitrogen. Some properties of poly(amide-imide)s III were compared with those of the corresponding isomeric poly(amide-imide)s III ′ prepared from 9,9-[4-(4-trimellitimidophenoxy)phenyl]fluorene and various aromatic diamines. © 1995 John Wiley & Sons, Inc.     

New light‐colored poly(ether imide)s based on 2,5‐di‐tert‐butylhydroquinone bis(ether anhydride) and aromatic diamines

A series of poly(ether imide)s (PEIs), III _a–k , with light color and good physical properties were prepared from 1,4‐bis(3,4‐dicarboxypheoxy)‐2,5‐di‐tert‐butylbenzene dianhydride ( I ) with various aromatic diamines ( II _a–k ) via a conventional two‐stage procedure that included a ring‐opening polyaddition to yield poly(amic acid)s (PAA), followed by thermal imidization to the PEI. The intermediate PAA had inherent viscosities in the range of 1.00–1.53 dL g^?1. Most of the PEIs showed excellent solubility in chlorinated solvents such as dichloromethane, chloroform, and m‐cresol, but did not easily dissolve in dimethyl sulfoxide and amide‐type polar solvents. The III series had tensile strengths of 96–116 MPa, an elongation at break of 7–8%, and initial moduli of 2.0–2.5 GPa. The glass‐transition temperatures (T_g) and softening temperatures (T_s's) of the III series were recorded between 232 and 285 °C and 216–279 °C, respectively. The decomposition temperatures for 10% weight loss all occurred above 511 °C in nitrogen and 487 °C in air. The III series showed low dielectric constants (2.71–3.54 at 1 MHz), low moisture absorption (0.18–0.66 wt %), and was light‐colored with a cutoff wavelength below 380 nm and a low yellow index (b^*) values of 7.3–14.8. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1270–1284, 2005     

Preparation and properties of new poly(amide‐imide)s based on 1,4‐bis(4‐trimellitimidophenoxy)naphthalene and aromatic diamines

A diimide dicarboxylic acid, 1,4‐bis(4‐trimellitimidophenoxy)naphthalene (1,4‐BTMPN), was prepared by condensation of 1,4‐bis(4‐aminophenoxy)naphthalene and trimellitic anhydride at a 1 : 2 molar ratio. A series of novel poly(amide‐imide)s (IIa–k) with inherent viscosities of 0.72 to 1.59 dL/g were prepared by triphenyl phosphite‐activated polycondensation from the diimide‐diacid 1,4‐BTMPN with various aromatic diamines (Ia–k) in a medium consisting of N‐methyl‐2‐pyrrolidinone (NMP), pyridine, and calcium chloride. The poly(amide‐imide)s showed good solubility in NMP, N,N‐dimethylacetamide, and N,N‐dimethylformamide. The thermal properties of the obtained poly(amide‐imide)s were examined with differential scanning calorimetry and thermogravimetry analysis. The synthesized poly(amide‐imide)s possessed glass‐transition temperatures in the range of 215 to 263°C. The poly(amide‐imide)s exhibited excellent thermal stabilities and had 10% weight losses at temperatures in the range of 538 to 569°C under a nitrogen atmosphere. A comparative study of some corresponding poly(amide‐imide)s also is presented. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1–8, 2000     

Synthesis and refractive‐index control of fluoropolymers by the polyaddition of bis(epoxide)s and triazine di(aryl ether)s

The polyaddition of fluorine‐containing bis(epoxide)s and fluorine‐containing triazine di(aryl ether)s were examined to give the corresponding fluorine‐containing poly(cyanurate)s. It was observed that the synthesized fluoropolymers had good thermal stabilities and good film‐forming properties. The glass transition temperatures (T_g's) and refractive‐indices (n_D's) of synthesized polymers were determined by differential scanning calorimetry and ellipsometry, respectively, and it was found that the values of T_g's and n_D's were supported by their fluorine containing ratios and skeletons. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4421–4429, 2007     

Behavior of aqueous solutions of polymer star with block copolymer poly(2-ethyl-2-oxazoline) and poly(2-isopropyl-2-oxazoline) arms

Eight-arm star-shaped poly(2-alkyl-2-oxazoline) (M?≈?21,000?g?·?mol^?1) was studied by turbidimetry and light scattering in aqueous solutions within concentration ranging from 0.00038 to 0.0276?g?·?cm^?3. The arms were the block copolymers of poly(2-isopropyl-2-oxazoline) (PiPrOx) and poly(2-ethyl-2-oxazoline) (PEtOx). Calix[8]arene core was connected with poly(2-isopropyl-2-oxazoline). The behavior of investigated polymer differed from that of thermosensitive stars with poly(2-alkyl-2-oxazoline) homopolymer arms. At low temperatures, the aggregates were formed due to interaction of hydrophobic cores. The phase separation temperatures T₁ and T₂ of studied star were higher than those for star-shaped poly(2-isopropyl-2-oxazoline) and lower than for poly(2-ethyl-2-oxazoline). T₁ and T₂ increased with dilution.     

Synthesis and properties of novel aromatic polyhydrazides and poly(amide–hydrazide)s based on the bis(ether benzoic acid)s from hydroquinone and substituted hydroquinones

4,4′‐(1,4‐Phenylenedioxy)dibenzoic acid as well as the 2‐methyl‐, 2‐tert‐butyl‐, or 2‐phenyl‐substituted derivatives of this dicarboxylic acid were synthesized in two main steps from p‐fluorobenzonitrile and hydroquinone or its methyl‐, tert‐butyl‐, or phenyl‐substituted derivatives. Polyhydrazides and poly(amide–hydrazide)s were prepared from these bis(ether benzoic acid)s or their diacyl chlorides with terephthalic dihydrazide, isophthalic dihydrazide, or p‐aminobenzoyl hydrazide by means of the phosphorylation reaction or low‐temperature solution polycondensation. Most of the hydrazide polymers and copolymers are amorphous and readily soluble in various polar solvents such as N‐methyl‐2‐pyrrolidone (NMP) and dimethyl sulfoxide. They could be solution‐cast into transparent, flexible, and tough films. These polyhydrazides and poly(amide–hydrazide)s had T_gs in the range of 167–237°C and could be thermally cyclodehydrated into the corresponding poly(1,3,4‐oxadiazole)s and poly(amide–1,3,4‐oxadiazole)s approximately in the region of 250–350°C, as evidenced by the DSC thermograms. All the tert‐butyl‐substituted oxadiazole polymers and those derived from isophthalic dihydrazide were organic soluble. The thermally converted oxadiazole polymers exhibited T_gs in the range of 208–243°C and did not show significant weight loss before 450°C either in nitrogen or in air. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1169–1181, 1999     

Synthesis and properties of novel aromatic poly(o-hydroxy amide)s and polybenzoxazoles based on the bis(ether benzoyl chloride)s from hydroquinone and its methyl-, tert-butyl-, and phenyl-substituted derivatives

Four series of poly(o-hydroxy amide)s were prepared by the low-temperature solution polycondensation of the bis(ether benzoyl chloride)s extended from hydroquinone and its methyl-, tert-butyl-, or phenyl-substituted derivatives with three bis(o-aminophenol)s. Most of the poly(o-hydroxy amide)s displayed an amorphous nature, were readily soluble in various polar solvents such as N,N-dimethylacetamide (DMAc), and could be solution-cast into flexible and tough films. These poly(o-hydroxy amide)s had glass transition temperatures (T_g) in the range of 152–185°C and could be thermally cyclodehydrated into the corresponding polybenzoxazoles approximately in the region of 200–400°C, as evidenced by the DSC thermograms. The thermally converted benzoxazole polymers exhibited T_gs in the range of 215–247°C and did not show significant weight loss before 500°C either in nitrogen or in air. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2129–2136, 1999     

Poly(L-lactide) macrodiols (HOPLLAOH): Influence of linear alkyl diols as initiators: Synthesis and characterization

A series of α,ω-hydroxy telechelic poly(L-lactide)s (HOPLLAOHs) were synthesized by ring-opening polymerization (ROP) of L-lactide (L-LA) using tin octoate [Sn(Oct)₂] as catalyst and a family of linear alkyl diols as initiators [HO–[CH₂]_m–OH, where m = 2, 4, 6, 8, 10, and 12]. A systematic analysis of these HOPLLAOHs species in terms of their thermal properties was realized by DSC. In this sense, the linear alkyl group had an important influence on the glass transition temperature (T_g); a relatively high content of alkyl group on the HOPLLAOH increased the flexibility of the polyester, evidenced by a value of T_g inversely proportional to the weight percent of the alkyl group. Besides, the alkyl groups had an effect on the crystallization temperature (T_c), melting temperature (T_m), and crystallinity (x_i). Additionally, HOPLLAOHs were characterized by ¹H and ¹³C NMR, FT-IR, MALDI-TOF, and GPC.     

Synthesis and characterization of poly(butylene terephthalates) modified by hydroquinone bis(2-hydroxyethyl)ether

A series of thermoplastic poly(butylene-co-hydroquinone bis(2-hydroxyethyl)ether terephthalates) (PBHT), with different molar ratios of hydroquinone bis(2-hydroxyethyl)ether (HQEE)/1,4-butanediol 9/91, 18/82 and 27/73, were synthesized via melt polycondensation. The compositions, thermodynamics and crystallization properties of the obtained copolyesters were characterized in detail by ¹H NMR, differential scanning calorimeters (DSC), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). These results showed that the PBHTs were successfully synthesized, and the incorporation of the HQEE group significantly improved thermal properties of the polymers. However, HQEE did not change the crystal structure of PBT. The T_m values of the copolymers decreased (from 208?°C to 174?°C) with increasing content of HQEE segments, on the contrary, T_g values increased (from 37?°C to 43?°C). The temperatures for 5% weight loss did not decrease and appeared at a range of 373–377?°C.     

First aldehyde-functionalized poly(2-oxazoline)s for chemoselective ligation

A protected aldehyde-functionalized 2-oxazoline, 2-[3-(1,3)-dioxolan-2-ylpropyl]-2-oxazoline (DPOx), was synthesized from commercially available compounds in high yields. The polymerization of DPOx with different initiators proceeds via a living ionic mechanism; thus, the polymers were of low polydispersity and the degree of polymerization could be precisely adjusted. Copolymerization with 2-methyl-2-oxazoline gave water-soluble statistical copolymers. Hydrolysis of the homo- and copolymers resulted in well-defined, aldehyde-bearing poly(2-oxazoline)s. The aldehyde side functions reacted quantitatively with an amino-oxy compound to form the corresponding oxime.