Binding of uranyl ion by poly(ethylenimine) containing a salicylate derivative

Three molecules of 5-(bromoacetyl)salicylate ( 1 ) complexed to uranyl UO ion were crosslinked with branchy poly(ethylenimine) (PEI) in DMSO by alkylation of amino groups of PEI with 1, leading to the formation of UO₂(Sal) PEI. Upon demetalation of UO₂(Sal) PEI with HCl, apo(Sal) PEI was obtained. Based on the pH dependence of log K_f for UO₂(Sal) PEI, it was concluded that each uranyl binding site in UO₂(Sal) PEI or apo(Sal) PEI contains three salicylate moieties. In terms of the equilibrium constant for formation of the uranyl complex, apo(Sal) PEI was found to be comparable to or better than the previously reported effective uranophiles. In terms of the rates for the formation of the uranyl complex, however, apo(Sal) PEI was far superior to those other uranophiles. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2935–2942, 1997     

Oxaaza macrocycles constructed on poly(ethylenimine) through Ni(II)-template cyclization and their metal binding

Polymeric oxaaza macrocycles (PEI-OAM) are constructed on poly(ethylenimine) (PEI) by Ni(II)-template alkylation of PEI with diethyleneglycol ditosylate. The K_f values for Ni(II), Cu(II), and Zn(II) complexes of PEI–OAM are measured at pH 3.5–10 at 25°C. At pH 7, log K_f values for these complexes are 9–15, indicating that the polymeric oxaaza macrocycles can readily reduce concentrations of these metal ions below ppb level. Metal binding ability of nonpolymeric oxaaza macrocyclic compounds reported in the literature decreases rapidly as pH is lowered below 7, whereas that of PEI–OAM decreases to lesser extents. This is attributed to the electrostatic effects exerted by the ammonium ions of PEI backbone. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 527–532, 1997.     

Uranyl ion complexation of 2,2′-dihydroxyazobenzene enhanced on a backbone of poly(ethylenimine)

The formation constant (K_f) for the uranyl complex of 2,2′-dihydroxyazobenzene (DHAB) was measured with DHAB attached to poly(ethylenimine) (DHAB-PEI) at pH 7.7 to 9.4. The value of K_f was estimated from the equilibrium constant for extraction of uranyl ion from the uranyl complex of DHAB-PEI (UO₂DHAB-PEI) with carbonate ion, which in turn was measured from the absorbance change observed on addition of bicarbonate ion to the solution of UO₂DHAB-PEI. At pH 8.0, the uranyl-binding ability of DHAB was enhanced by about 10⁴ times on attachment of DHAB to PEI. The major origin of the increased ability of uranyl ion complexation is the basic local microenvironment of PEI, which encourages ionization of the phenol groups of DHAB. Various other possible origins are discussed also. The log K_f for DHAB-PEI at pH 8.0 indicates that DHAB moieties of DHAB-PEI are mostly occupied, whereas DHAB unattached to PEI is mostly unoccupied by uranyl ion under conditions of seawater when only the pH and concentrations of bicarbonate and uranyl ions of seawater are considered. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3936–3942, 1999     

Self-optimization of binding sites by Ni(II) ion on carboxypyrazine-containing poly(ethylenimine)

To test the concept of self-optimization of own binding site by a metal ion, host molecules for Ni(II) ion were built on poly(ethylenimine) (PEI) by using the ethylenediamine portions of PEI and 2-carboxypyrazinyl (CP) group. Two derivatives of PEI containing CP were prepared: one by random acylation of PEI with pyrazine-2,5-dicarboxylic acid mono-(2,5-dioxo-pyrrolidin-1-yl) ester (PC-DP), and the other by acylation of PEI with PC–DP in the presence of Ni(II) ion. Between these two CP derivatives of PEI, Ni(II) binding ability was more than 10³ times greater for the latter. Optimization by Ni(II) ion of its own binding site built on the polymer was attributed to the preassemblage of PC–DP and PEI with Ni(II) ion and the subsequent attack at PC–DP by an amino group of PEI located in an optimal position. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 533–537, 1997.     

Phosphoprotein electrophoresis in the presence of Fe(III) ions

Preparation of affinity polyacrylamide gels containing immobilized Fe(III) ions for the separation of proteins exhibiting metal ion binding properties is described. The presented method enables uniform distribution of immobilized metal ions in the affinity part of the polyacrylamide separating gel. Affinity gels prepared by this way are suitable to follow the effect of different concentrations of metal ions immobilized in polyacrylamide gel on a protein electrophoretic behavior. Polyacrylamide gels containing immobilized Fe(III) ions were used to study the electrophoretic behavior of two model proteins differing in their phosphate group content: chicken ovalbumin and bovine α‐casein. For the electrophoretic separation, both the native and the denaturating conditions were used.     

Investigation of the spectral properties of a squarylium near-infrared dye and its complexation with Fe(III) and Co(II) ions

The spectral features of the squarylium near-infrared (NIR) dye NN525 in different solutions and its complexation with several metal ions were investigated. The absorbance maximum of the dye is λ=663 nm in methanol. This value matches the output of a commercially available laser diode (650 nm), thus making use of such a source practical for excitation. The emission wavelength of the dye in methanol is λ_em=670 nm. The addition of either Fe(III) ion or Co(II) ion resulted in fluorescence quenching of the dye. The Stern–Volmer quenching constant, K_SV, was calculated from the Stern–Volmer plot to be K_SV=2.70×10⁷ M⁻¹ for Co(II) ion. The K_SV value for Fe(III) ion could not be established due to the non-linearity of the Stern–Volmer plot and the modified Stern–Volmer plot for this ion. The detection limit is 6.24×10⁻⁸ M for Fe(III) ion and 1.55×10⁻⁵ M for Co(III) ion. The molar ratio of the metal to the dye was established to be 1:1 for both metal ions. The stability constant, K_S, of the metal–dye complex was calculated to be 3.14×10⁶ M⁻¹ for the Fe–dye complex and 2.64×10⁵ M⁻¹ for the Co–dye complex.     

Outer-sphere electron-transfer reactions of co(III)–polymer complexes in relation to its polymer effects

The outer-sphere electron-transfer reactions between [Co(III)(NH₃)₅L] (CIO₄)₃ [L = polyethyleneimine (PEI), L = NH₃(Amm)] or cis-[Co(III)(en)₂L′Cl]Cl₂ [L′ = poly-N-vinyl-2-methylimidazole(PVI), poly-4-vinylpyridine (PVP), N-ethylimidazole (NEI), pyridine (Py)] and various Fe(II) were studied. In the reaction with Fe(II)-(phen)₃²⁺, the reactivity of Co(III)–PEI was smaller than that of Co(III)–Amm due to the larger electrostatic repulsion. On the other hand, the reactivity of Co(III)–PEI was larger by a factor of 80 in the reaction with Fe(II)(H₂O)₆²⁺. From the results of rapid-scanning spectroscopy, the higher reactivity of Co(III)–PEI is caused by the coordination of free ethyleneimine residues in the Co(III)–PEI to Fe(II)–ion. Further more, the hydrophobic interaction between heteroaromatic polymer ligands and Fe(II)-(phen)₃²⁺ brought about the higher reactivities of Co(III)–PVI and Co(III)–PVP. Three interactions caused by the essential properties of polymers are discussed in relation to conformational changes.     

Role of oxygen in the degradation of atrazine by UV/Fe(III) process

In this study, the role of oxygen in the regeneration of Fe(III) during the degradation of atrazine in UV/Fe(III) process was studied. The degradations of atrazine in UV/Fe(III) and UV-photolysis processes in the presence and absence of oxygen were compared. The results showed that the degradations of atrazine in these processes followed the pseudo-first-order kinetics well. The process exhibiting the highest rate constant (k) was UV/Fe(III)/air process, because k-value for UV/Fe(III)/air process was about 1.47, 2.23 and 2.56 times of those for UV/Fe(III)/N₂, UV/air and UV/N₂ processes, respectively. The degradation of atrazine was enhanced by oxygen in UV/Fe(III) process and the enhancement was more remarkable at higher initial concentrations of Fe(III). The investigation into the changes of Fe(III) concentrations demonstrated that the presence of oxygen led to the regeneration of Fe(III), which resulted in the enhancement of atrazine degradation. With air bubbling, the ferric ions were 25% more than those with N₂ bubbling. The experimental data showed the regeneration of Fe(III) required the excited organic molecules and oxygen and on the basis of these results, the regeneration mechanism of Fe(III) was proposed. It was also found that due to the oxidation of Fe(II), the degradation of atrazine in UV/Fe(II)/air process was effective at a low Fe(II) concentration of 7 mg/L, similar to that in UV/Fe(III)/air process. This study makes clear the role of oxygen in the regeneration of Fe(III), and thus it provides a guide to reduce the input of Fe(III) and is helpful to the application of UV/Fe(III) process in practice.     

Iron(III)‐Complexes Engaged in the Biochemical Processes in Seawater. II. Voltammetry of Fe(III)‐Malate Complexes in Model Aqueous Solution

Characteristics of iron(III) complexes with malic acid in 0.55 mol L^?1 NaCl were investigated by voltammetric techniques. Three iron(III)‐malate redox processes were detected in the pH range from 4.5 to 11: first one at ?0.11 V, second at ?0.35 V and third at ?0.60 V. First process was reversible, so stability constants of iron(III) and iron(II) complexes were calculated: log K₁(Fe^III(mal))=12.66±0.33, log β₂(Fe^III(mal)₂)=15.21±0.25, log K₁(Fe^II(mal))=2.25±0.36, and log β₂(Fe^II(mal)₂)=3.18±0.32. In the case of second and third reduction process, conditional cumulative stability constants of the involved complexes were determined using the competition method: log β(Fe(mal)₂(OH)_x)=15.28±0.10 and log β(Fe(mal)₂(OH)_y)=27.20±0.09.     

Complexes of oxamic acid with Au(III) and Rh(III)

The preparation and some properties of the deprotonated complexes of oxamic acid with Au(III) and Rh(III) are reported. On the basis of analytical results, conductometric measurements, magnetic moments and spectral data (IR and UV-visible), a square planar structure is proposed for K[AuL(OH)₂] and octahedral for K₃[RhL ₃] 3H₂O (whereLH₂=oxamic acid).L ^2– acts as a bidentate, non-bridging ligand.

---

Komplexe der Oxamidsäure mit Au(III) und Rh(III)

Zusammenfassung Es wird über die Darstellung und einige Eigenschaften von deprotonierten Komplexen der Oxamidsäure mit Au(III) und Rh(III) berichtet. Auf der Grundlage von analytischen Ergebnissen, Leitfähigkeitsmessungen, magnetischen Momenten und IR- und UV(vis)-spektroskopischen Daten wird für K[AuL(OH)₂] eine quadratisch planare und für K₃[RhL ₃] 3 H₂O eine oktaedrische Struktur vorgeschlagen (LH₂=Oxamidsäure).L ^2– reagiert als zweizähniger, nicht überbrückender Ligand.

     

Ru(III), Cr(III), Fe(III) complexes of Schiff base ligands bearing phenoxy Groups: Application as catalysts in the synthesis of vitamin K3

Two polydentade Schiff base ligands and their Ru(III), Cr(III) and Fe(III) complexes were synthesized and characterized by elemental analysis (C, H, N), UV/Vis, FT IR, ¹H and ¹³C NMR, LC–MS/MS, molar conductivity and magnetic susceptibility techniques. The absorption bands in the electronic spectra and magnetic moment measurements verified an octahedral environment around the metal ions in the complexes. The thermal stabilities were investigated using TGA. The synthesized complexes were used in the catalytic oxidation of 2-methyl naphthalene (2MN) to 2-methyl-1,4-naphthoquinone; vitamin K₃, menadione, 2MNQ; using hydrogen peroxide, acetic acid and sulfuric acid. L₁-Fe(III) complex showed very efficient catalytic activity with 58.54% selectivity in the conversions of 79.11%.     

Simple flow injection method for simultaneous spectrophotometric determination of Fe(II) and Fe(III)

The method is based on spectrophotometric determination of Fe(II) and Fe(III) at a single wavelength (530 nm) with the use of a dedicated reversed-flow injection system. In the system, EDTA solution is injected into a carrier stream (HNO₃) and then merged with a sample stream containing a mixture of sulfosalicylic acid and 1,10-phenanthroline as indicators. In an acid environment (pH ≅ 3) the indicators form complexes with both Fe(III) and Fe(II), but EDTA replaces sulfosalicylic acid, forming a more stable colourless complex with Fe(III), whereas Fe(II) remains in a complex with 1,10-phenenthroline. As a result, the area and minimum of the characteristic peak can be exploited as measures corresponding to the Fe(III) and Fe(II) concentrations, respectively. The analytes were not found to affect each other's signals, hence two analytical curves were constructed with the use of a set of standard solutions, each containing Fe(II) and Fe(III). Both analytes were determined in synthetic samples within the concentration ranges of 0.05–4.0 and 0.09–6.0 mg L⁻¹, respectively, with precision less than 1.5 and 2.6% (RSD) and with accuracy less than 4.3 and 5.6% (RE). The method was applied to determination of the analytes in water samples collected from artesian wells and the results of the determination were consistent with those obtained using the ICP-OES technique.     

Efficient enhancement of the thermoelectric performance of vapor phase polymerized poly(3,4‐ethylenedioxythiophene) films with poly(ethyleneimine)

Tuning the molecular rearrangement and oxidation level has been proven to be effective strategies for optimizing the thermoelectric (TE) performance of PEDOT. It is difficult to achieve these effects simultaneously via a one‐step process, however. In this work, we combined vapor phase polymerization (VPP) and H₂SO₄ post‐treatment to obtain a highly conductive PEDOT film. A novel strategy using polyethylenemine (PEI) as an effective reducing agent was employed to enhance the thermopower of the PEDOT film. Grazing‐Incidence Wide‐Angle X‐ray Scattering analysis and the changes in the oxidation level allow us to elucidate the role of PEI and its transport mechanism. It is demonstrated that the thermopower of well‐ordered crystallites in the PEDOT film significantly increases more than five times (from 11 to 59 μV K^?1) by the PEI‐DMF solution immersion process, while the electrical conductivity is maintained at 100 S cm^?1. The promising method connecting VPP, H₂SO₄, and PEI shows great potential for effectively tuning the thermopower of organic TE materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 257–265     

Norfloxacin La(III)-based complex: synthesis,characterization, and DNA-binding studies

A La(III) complex, [La^IIICl₂(NOR)₂]Cl (2), containing norfloxacin (NOR) (1), a synthetic fluoroquinolone antibacterial agent, has been synthesized and characterized by elemental analysis, IR, UV–vis spectra and ¹H NMR spectroscopy, and molar conductance measurements. The interaction between 2 and CT-DNA was investigated by steady-state absorption and fluorescence techniques in different pH media, and showed that 2 could bind to CT-DNA presumably via non-intercalative mode and the La(III) complex showed moderate ability to bind CT-DNA compared to other La(III) complexes. The binding site number n, and apparent binding constant K_A, corresponding thermodynamic parameters ΔG^#, ΔH^#, ΔS^# at different temperatures were calculated. The binding constant (K_A) values are 0.23 ± 0.05, 0.56 ± 0.05, and 0.18 ± 0.08 × 10⁵ L mol^?1 for pH 4, 7, and 11, respectively. It was also found that the fluorescence quenching mechanism of CT-DNA by La(III) complex was a static quenching process.     

Interaction of Phosphate with Iron(III) in Acidic Medium,Equilibrium and Kinetic Studies

Equilibrium reactions of iron(III) with phosphate were studied spectrophotometrically by UV-Vis in the pH range of ～ 1.0-2.20. The STAR-94 Program was used to determine the number of absorbing species as well as the stoichiometries and formation constants of the complex species. Some literature values were further confirmed and new values of different stoichiometries were obtained. The kinetics and mechanism of Fe(III) with phosphate were studied in acidic medium. The reactive phosphate species were found to be only H₃PO₄ and H₂PO^? ₄ and for Fe(III) were only Fe³⁺, FeOH²⁺ and Fe(OH)⁺ ₂. The observed rate constants were pH as well as T_phos (total concentration of phosphate) dependent, i.e. K_obs,i = A _i + B _i T_phos + C _i T² _phos (at a given pH).     

Recent advances in synthesis and analysis of Fe(VI) cathodes: solution phase and solid-state Fe(VI) syntheses,reversible thin-film Fe(VI) synthesis,coating-stabilized Fe(VI) synthesis,and Fe(VI) analytical methodologies

Fe(VI) batteries based on unusual ferrate cathodic charge storage have been studied for quite a few years. So far, a class of Fe(VI) compounds have been successfully synthesized and studied as the cathodic materials in both alkaline and nonaqueous battery systems. This paper provides a summary of the syntheses of a range of Fe(VI) cathodes including the alkali Fe(VI) salts Li₂FeO₄, K _x Na_(2?x)FeO₄, K₂FeO₄, Rb₂FeO₄, Cs₂FeO₄, as well as alkali earth Fe(VI) salts CaFeO₄, SrFeO₄, BaFeO₄, and a transition metal Fe(VI) salt Ag₂FeO₄. Two synthesis routes summarized in this paper are the solution phase synthesis and the solid-state synthesis. Preparation of coating-stabilized (coated with KMnO₄, SiO₂, TiO₂, or ZrO₂) Fe(VI) cathodes and preparation of thin-film reversible Fe(VI/III) cathodes are also presented. Fe(VI) analytical methodologies summarized in this paper include Fourier transform infrared spectrometry, titrimetric (chromite), ultraviolet-visible spectroscopy, X-ray diffraction, inductively coupled plasma spectroscopy, Mössbauer spectrometry, potentiometric, galvanostatic, and cyclic voltammetry. Cathodic charge transfer of Fe(VI) is also briefly presented.     

Kinetic Study of the Ce(III)‐, Mn(II)‐, or Ferroin‐Catalyzed Belousov‐Zhabotinsky Reaction with Allylmalonic Acid

In a stirred batch experiment and under aerobic conditions, ferroin (Fe(phen)₃²⁺) behaves differently from Ce(III) or Mn(II) ion as a catalyst for the Belousov‐Zhabotinsky (BZ) reaction with allylmalonic acid (AMA). The effects of bromate ion, AMA, metal‐ion catalyst, and sulfuric acid on the oscillating pattern were investigated. The kinetics of the reaction of AMA with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion was studied under aerobic or anaerobic conditions. The order of reactivity of metal ions toward reaction with AMA is Fe(phen)₃³⁺ > Mn(III) > Ce(IV) under aerobic conditions whereas it is Mn(III) > Ce(IV) > Fe(phen)₃³⁺ under anaerobic conditions. Under aerobic or anaerobic conditions, the order of reactivity of RCH(CO₂H)₂ (R = H (MA), Me (MeMA), Et (EtMA), allyl (AMA), n‐Bu (BuMA), Ph (PhMA), and Br (BrMA)) is PhMA > MA > BrMA > AMA > MeMA > EtMA > BuMA toward reaction with Ce(IV) ion and it is MA > PhMA > BrMA > MeMA > AMA > EtMA > BuMA toward reaction with Mn(III) ion. Under aerobic conditions, the order of reactivity of RCH(CO₂H)₂ toward reaction with Fe(phen)₃³⁺ ion is PhMA > BrMA > (MeMA, AMA) > (BuMA, EtMA) > MA. The experiment results are rationalized.     

CRYSTAL STRUCTURE AND MAGNETIC MEASUREMENTS OF CIS-DICYANO-BIS (1,10-PHENANTHROLINE)IRON(III) SULFATE

Abstract

The structure of the solvatochromic complex cis-dicyano-bis(1,10-phenanthroline)iron(III) sulfate dihydrate was determined by X-ray diffraction. The complex crystallized in a compressed octahedral conformation with the cyanide ligands cis-bonded. The unit cell contains enantiomeric pairs of the compound with a network of sulfate ions and water molecules stabilized by hydrogen bonding. The magnetic moments of the perchlorate salt dissolved in both water and nonaqueous solvents were probed and found to be in accord with a solvated, low spin [Fe(III)(phen)₂(CN)₂]⁺ ion, (μ_exp = 2.0–2.6 BM, 298K), showing no dependence on the empirical solvent parameters AN, DN, E_T(30) and π?.     

Ion association in solutions of dimethylthallium(III) hydroxide

From studies of the specific hydroxide ion catalyzed decomposition of diacetone alcohol by dimethylthallium(III) hydroxide at 25°C, it is concluded that both ion pairs (dissociation constantK=0.090 mole-dm^–3) and dimers (dimerization constantK _d=1.5 dm³-mole^–1) exist in aqueous solution.Request for reprints should be addressed to: Dr. A. D. Pethybridge, Department of Chemistry, The University, Whiteknights Park, Reading, Berkshire, England.Deceased October 16, 1972.     

Binding of uranyl ion by 2,2′-dihydroxyazobenzene attached to crosslinked polystyrenes covered with highly populated quaternary ammonium cations

2,2′-Dihydroxyazobenzene (DHAB) derivatives were attached to poly(chloromethylstyrene-co-divinylbenzene) (PCD) because of the high affinity of DHAB for uranyl ion. Chloromethyl groups of PCD were converted to quaternary ammonium ions by treating them with tertiary amines. Two strategies were adopted to improve the uranyl-binding ability of the immobilized DHAB: (1) the creation of a highly cationic microenvironment around the DHAB moieties and (2) the introduction of electron-withdrawing groups to DHAB. Capacity of the resins for uranyl uptake was measured, revealing that about 10 to 46 mg of uranium could be complexed to 1 g of the resins. Formation constants (K_f) for the uranyl complexes of the resins were determined. In the presence of ≥0.02 M bicarbonate ion at pH 8.02, log K_f values of 14.3 to 15.8 were obtained. Uranium extraction from seawater with two kinds of resins prepared in this study was carried out on the east coast of the Korean peninsula. The amount of uranium extracted from seawater was up to 150 μg/g resin. Thus, the uranium-extracting capability of the DHAB-containing polystyrene resins was improved significantly by the structural modifications. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4117–4125, 1999