Studies on microgels, 3. Synthesis using living free radical polymerization

Microgels which are soluble crosslinked polymer networks have been prepared using the nitroxide living free radical polymerization methodology. When heated in the presence of tert-butylstyrene and 1,4-divinylbenzene, the alkoxyamine 1 derived from 2,2′-azoisobutyronitrile (AIBN) afforded a high molecular weight soluble polymer which was shown by size exclusion chromatography in conjunction with an on-line multi angle laser light scattering (MALLS) detector to have microgel properties.     

Synthesis of novel core‐crosslinked graft copolymers from crosslinked poly(mercapto‐thiourethane)

Crosslinked poly(mercapto‐thiourethane) was employed as a precursor for graft copolymer synthesis. The crosslinked stem polymer ( 1 ) was easily prepared by polyaddition of a bifunctional dithiocarbonate and piperazine under air atmosphere via oxidative coupling of mercapto group. Polymerization of styrene and methyl methacrylate in the presence of 1 yielded the corresponding crosslinked graft copolymers with high grafting weight percentages (>1800%). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5097–5102, 2005     

Crosslinkable polyurethane bearing a methacrylate structure in the side chain

A polyurethane bearing methacrylate groups through urethane linkages was prepared by the addition of 2‐methacryloyloxyethyl isocyanate to the hydroxyl groups in poly(hydroxyurethane) prepared by the polyaddition of a bifunctional cyclic carbonate with 1,12‐diaminododecane. The urethanization proceeded quantitatively in the presence of a catalytic amount of di‐n‐butyltin dilaurate at an ambient temperature, whereas a crosslinked product was obtained from the reaction at 60 °C. The resulting linear polyurethane, bearing a methacrylate structure, was thermally crosslinkable. Its radical copolymerization with vinyl‐type monomers afforded the corresponding crosslinked polymers, whose low glass transition temperatures suggested the flexibility of the polymer chains in the crosslinked product. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3400–3407, 2007     

Degradable polymer networks and star polymers based on mixtures of two cleavable dimethacrylate crosslinkers: Synthesis,characterization, and degradation

Mixtures of two cleavable dimethacrylate crosslinkers, the hydrolyzable di(methacryloyloxy‐1‐ethoxy)methane (DMOEM) and the thermolyzable 1,1‐ethylenediol dimethacrylate (EDDMA), were used for the preparation of neat crosslinker polymer networks, randomly crosslinked polymer networks of methyl methacrylate (MMA), and star polymers of MMA, using group transfer polymerization in tetrahydrofuran (THF). All star polymers and randomly crosslinked polymer networks containing mixtures of the hydrolyzable DMOEM and the thermolyzable EDDMA crosslinkers gave THF‐soluble final products when subjected to sequential thermolysis and hydrolysis, in this order. When applying sequential hydrolysis and thermolysis, only the star polymers with an EDDMA crosslinker content equal to or higher than 50% gave THF‐soluble final products. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5853–5870, 2009     

Synthesis of methacrylate polymer bearing cyanate groups and its chemoselective reaction with amines

A novel reactive polymer containing cyanate groups in the side chain was prepared by free radical polymerization of a cyanate‐containing monomer, 2‐(4‐cyanatophenyl)ethyl methacrylate ( 1 ). The monomer 1 and its polymer, poly[2‐(4‐cyanatophenyl)ethyl methacrylate] (PCPMA), were stable under the air for a long period. The copolymerization of 1 and methyl methacrylate provided the corresponding copolymers with various cyanate contents. The availability of the cyanate‐containing polymers as a reactive polymer was investigated. Model reaction using 4‐cyanatotoluene revealed that a cyanate group reacted with aliphatic amines, whereas no reaction occurred in the presence of water, alcohols, and aromatic amines under mild conditions. Post‐functionalization of PCPMA was demonstrated using aliphatic amines or diamines. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 699–706     

Multistimuli responsive ternary polyampholytes: Formation and crosslinking of coacervates

A series of multiresponsive ternary polyampholytes were prepared by free‐radical copolymerization of N‐(3‐aminopropyl) methacrylamide hydrochloride (APM), methacrylic acid (MAA), and N‐(2‐hydroxyethyl) acrylamide (HEA). APM and MAA were held at 1:1 molar ratio, while the HEA monomer feed was varied between 14 and 33 mol %. Compositional drift during polymerization was monitored by ¹H nuclear magnetic resonance, and minimized by adjusting the reactivity of MAA through its degree of ionization. The resulting polyampholytes phase‐separate from aqueous solution to form coacervate droplets, depending on HEA content, pH, ionic strength, and temperature. These coacervate droplets could be covalently crosslinked and the resulting hydrogel particles were found to swell with increasing ionic strength. Such soluble and microgel polyampholytes open opportunities for new multistimuli responsive biomaterials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2109–2118     

Zwitterionic shell‐crosslinked micelles from block‐comb copolymer of PtBA‐b‐P(PEGMEMA‐co‐DMAEMA)

Through reversible addition‐fragmentation chain transfer (RAFT) polymerization of t‐butyl acrylate (tBA) and RAFT copolymerization of 2‐dimethylaminoethyl methacrylate (DMAEMA) with poly(ethylene glycol) methyl ether methacrylate (PEGMEMA), block‐comb copolymer of PtBA‐b‐P(PEGMEMA‐co‐DMAEMA) was prepared. After the self‐assembly of PtBA‐b‐P(PEGMEMA‐co‐DMAEMA) into core‐shell spherical micelles, P(PEGMEMA‐co‐DMAEMA) segments of the shell was crosslinked with 1,2‐bis(2‐iodoethoxy)ethane and the core of PtBA was selectively hydrolysized with trifluoroacetic acid. Thus, zwitterionic shell‐crosslinked micelles with positively charged outer shell and negatively charged inner core were obtained. Dynamic light scattering, transmission electron microscope, Zeta potential measurement, and nuclear magnetic resonance were used to confirm the formation of the zwitterionic shell‐crosslinked micelles. They showed the excellent resistance to the variation of pH value and possessed the positive values throughout the whole range of pH range even if the carboxylic groups of the micelles was much more than ammonium groups. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Interfacial crosslinking of self‐assembled triblock copolymer nanoparticles via alkoxysilane hydrolysis and condensation

The use of amphiphilic triblock copolymers bearing a reactive alkoxysilane middle block as polymeric stabilizers is reported in this work. A series of poly(ethylene glycol) methyl ether methacrylate‐b‐(3‐trimethoxysilyl)propyl methacrylate‐b‐benzyl methacrylate (PEGMA‐b‐MPS‐b‐BzMA) triblock copolymers were prepared by RAFT solution polymerization and polymerization‐induced self‐assembly (PISA), respectively, where the various block lengths and overall composition were varied. The copolymers prepared by solution polymerization were employed as oil‐in‐water stabilizers where upon application of a catalyst, the 3‐(trimethoxysilyl)propyl methacrylate (MPS) block at the droplet interface was crosslinked to yield capsule‐like structures. The effectiveness of interfacial crosslinking was validated by dynamic light scattering and electron microscopy. In situ self‐assembly by the PISA method resulted in spherical nanoparticles of controllable size that were readily crosslinked by addition of base, with significant enhancement of colloidal stability. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1897–1907     

Synthesis of star‐shaped copolymers with methyl methacrylate and n‐butyl methacrylate by metal‐catalyzed living radical polymerization: Block and random copolymer arms and microgel cores

Various star‐shaped copolymers of methyl methacrylate (MMA) and n‐butyl methacrylate (nBMA) were synthesized in one pot with RuCl₂(PPh₃)₃‐catalyzed living radical polymerization and subsequent polymer linking reactions with divinyl compounds. Sequential living radical polymerization of nBMA and MMA in that order and vice versa, followed by linking reactions of the living block copolymers with appropriate divinyl compounds, afforded star block copolymers consisting of AB‐ or BA‐type block copolymer arms with controlled lengths and comonomer compositions in high yields (≥90%). The lengths and compositions of each unit varied with the amount of each monomer feed. Star copolymers with random copolymer arms were prepared by the living radical random copolymerization of MMA and nBMA followed by linking reactions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 633–641, 2002; DOI 10.1002/pola.10145     

Spontaneous alternating copolymerization of isobutoxyallene with 4-phenyl-1,2,4-triazoline-3,5-dione

The spontaneous copolymerization of isobutoxyallene ( 1 ) with 4-phenyl-1,2,4-triazoline-3,5-dione ( 2 ) was carried out to afford a copolymer with a number-average molecular weight of 5900–10,300. The copolymer consisted of a 2,3-polymerization unit of 1 and a  NN polymerization unit of 2 , maintaining an alternating character regardless of the monomer feed ratio. The corresponding copolymerization of 1 with 2 in the presence of methanol afforded the adduct of the compounds without the polymer, indicating the generation of a zwitterion of 1 and 2 . © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1564–1571, 2001     

Selective retention of some polyaromatic hydrocarbons by highly crosslinked polymer networks

Highly crosslinked polymer networks were characterized in terms of structural differences based on the crosslinked network structures with their chromatographic molecular retentivity for some polyaromatic hydrocarbons (PAHs). Because PAHs and some sterically bulky solutes were used in the chromatographic characterization, tiny differences in the crosslinked polymer networks were observed in terms of the chromatographic molecular retentivity. Ethylene dimethacrylate afforded molecular retentivity for anthracene, and this recognition ability changed with the polymerization time. In addition, 1,4‐butanediol dimethacrylate afforded molecular retentivity for pyrene, and this retentivity was larger than that for anthracene. The polymerization methods also affected the resulting polymer networks drastically. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2556–2566, 2005     

Radical and cationic polymerizations of 3‐ethyl‐3‐methacryloyloxymethyloxetane

3‐Ethyl‐3‐methacryloyloxymethyloxetane (EMO) was easily polymerized by dimethyl 2,2′‐azobisisobutyrate (MAIB) as the radical initiator through the opening of the vinyl group. The initial polymerization rate (R_p) at 50 °C in benzene was given by R_p = k[MAIB]^0.55 [EMO]^1.2. The overall activation energy of the polymerization was estimated to be 87 kJ/mol. The number‐average molecular weight (M?_n) of the resulting poly(EMO)s was in the range of 1–3.3 × 10⁵. The polymerization system was found to involve electron spin resonance (ESR) observable propagating poly(EMO) radicals under practical polymerization conditions. ESR‐determined rate constants of propagation (k_p) and termination (k_t) at 60 °C are 120 and 2.41 × 10⁵ L/mol s, respectively—much lower than those of the usual methacrylate esters such as methyl methacrylate and glycidyl methacrylate. The radical copolymerization of EMO (M₁) with styrene (M₂) at 60 °C gave the following copolymerization parameters: r₁ = 0.53, r₂ = 0.43, Q₁ = 0.87, and e₁ = +0.42. EMO was also observed to be polymerized by BF₃OEt₂ as the cationic initiator through the opening of the oxetane ring. The M?_n of the resulting polymer was in the range of 650–3100. The cationic polymerization of radically formed poly(EMO) provided a crosslinked polymer showing distinguishably different thermal behaviors from those of the radical and cationic poly(EMO)s. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1269–1279, 2001     

Multifunctional ATRP initiators: Synthesis of four‐arm star homopolymers of methyl methacrylate and graft copolymers of polystyrene and poly(t‐butyl methacrylate)

Tetrakis bromomethyl benzene was used as a tetrafunctional initiator in the synthesis of four‐armed star polymers of methyl methacrylate via atom transfer radical polymerization (ATRP) with a CuBr/2,2 bipyridine catalytic system and benzene as a solvent. Relatively low polydispersities were achieved, and the experimental molecular weights were in agreement with the theoretical ones. A combination of 2,2,6,6‐tetramethyl piperidine‐N‐oxyl‐mediated free‐radical polymerization and ATRP was used to synthesize various graft copolymers with polystyrene backbones and poly(t‐butyl methacrylate) grafts. In this case, the backbone was produced with a 2,2,6,6‐tetramethyl piperidine‐N‐oxyl‐mediated stable free‐radical polymerization process from the copolymerization of styrene and p‐(chloromethyl) styrene. This polychloromethylated polymer was used as an ATRP multifunctional initiator for t‐butyl methacrylate polymerization, giving the desired graft copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 650–655, 2001     

Synthesis of gold–poly(methyl methacrylate) core–shell nanoparticles by surface‐confined atom transfer radical polymerization at elevated temperature

Surface‐confined atom transfer radical polymerization was used to prepare gold nanoparticle–poly(methyl methacrylate) core–shell particles at elevated temperature. First, gold nanoparticles were prepared by the one‐pot borohydride reduction of tetrachloroaurate in the presence of 11‐mercapto‐1‐undecanol (MUD). MUD‐capped gold nanoparticles were then exchanged with 3‐mercaptopropyltrimethoxysilane (MPS) to prepare a self‐assembled monolayer (SAM) of MPS on the gold nanoparticle surfaces and subsequently hydrolyzed with hydrochloric acid. The extent of exchange of MUD with MPS was determined by NMR. The resulting crosslinked silica‐primer layer stabilized the SAM of MPS and was allowed to react with the initiator [(chloromethyl)phenylethyl] trimethoxysilane. Atom transfer radical polymerization was conducted on the Cl‐terminated gold nanoparticles with the CuCl/2,2′‐bipyridyl catalyst system at elevated temperature. The rates of polymerization with the initiator‐modified gold nanoparticles exhibited first‐order kinetics with respect to the monomer, and the number‐average molecular weight of the cleaved graft polymer increased linearly with the monomer conversion. The presence of the polymer on the gold nanoparticle surface was identified by Fourier transform infrared spectroscopy and transmission electron microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3631–3642, 2005     

Unsaturated,biobased polyesters and their cross‐linking via radical copolymerization

Biobased, unsaturated polyesters derived from isosorbide, maleic anhydride, and succinic acid were synthesized and characterized. The presence of maleic anhydride units in the structure of the polyesters allowed converting them into cured coatings by radical copolymerization with crosslinking agents such as 2‐hydroxyethyl methacrylate, N‐vinyl‐2‐pyrrolidinone, acrylic acid or methacrylamide. The investigated polyesters were obtained via bulk polycondensation, catalyzed by titanium(IV) n‐butoxide. 2D NMR and MALDI‐Tof‐MS spectroscopy proved that this polymerization resulted in isomerization of maleic acid units into fumaric ones and in the formation of slightly branched structures by the reaction of isosorbide (end) groups with main chain unsaturated bonds. Moreover, some double bonds proved to have reacted with the condensation by‐product water. The resulting polyesters displayed the expected correlation between variables such as molecular weight and content of unsaturated bonds and their T_g values. Since the thermal properties of the obtained polyesters were appropriate for coating applications, the polymers were crosslinked with unsaturated monomers by radical copolymerization. The crosslinking process was studied using FTIR spectroscopy and by measurements of the soluble part of the cured coatings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2885–2895, 2010     

Microgel formation in emulsion copolymerization. I. Polymerization without seed latex

Microgel formation during emulsion copolymerization of methyl methacrylate and ethylene glycol dimethacrylate is investigated both experimentally and theoretically. It was found that the average crosslinking density is fairly high even from a very early stage of polymerization. The molecular weight distribution (MWD) development in emulsion crosslinking copolymerization is completely different from that in homogeneous polymerization. Because the maximum molecular weights allowed to exist is limited by the particle size, a comprehensive model for the MWD development in nonlinear emulsion polymerization must account for the size of polymerization locus properly. During the formation of microgels, a drastic change in the weight-average molecular weights, which is characteristic of gelation in homogeneous media, is not always required. In a typical microgel formation process where a large mole fraction of divinyl monomer is used, the average molecular weights may increase just linearly with conversion in which a sharp MWD shifts to higher molecular weights with the progress of polymerization. It is shown that the microgels formed in emulsion polymerization are characterized as intramolecularly crosslinked macromolecules that occupy a very large weight fraction in each polymer particle. © 1996 John Wiley & Sons, Inc.     

Synthesis of crosslinked poly(butyl methacrylate‐co‐pentaerythritol triacrylate) gel by single electron transfer‐living radical polymerization and its oil‐absorbing properties

A novel high oil‐absorbing crosslinked gel was synthesized by copolymerization of butyl methacrylate (BMA) with a small amount of pentaerythritol triacrylate (PETA) crosslinker using single electron transfer‐living radical polymerization (SET–LRP) initiated with carbon tetrachloride (CCl₄) and catalyzed by Cu(0)/hexamethylenetetramine (HMTA) in N, N‐dimethylformamide (DMF). The polymerization followed first‐order kinetics as indicated by linear increase of monomer concentration with reaction time. Effects of reaction temperature, crosslinker, initiator, and catalyst on the oil‐absorbing properties of the crosslinked gel were investigated in detail. The oil absorptions of the crosslinked gel to chloroform, toluene could reach 51.9, 34.5 g/g, respectively. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel approach to well‐defined polyester by living anionic alternating copolymerization of ethylphenylketene with 4‐methoxybenzaldehyde

A living anionic alternating copolymerization of ethylphenylketene (EPK) with 4‐methoxybenzaldehyde (MBA) was achieved. When n‐butyllithium was added to a mixture of EPK and MBA in tetrahydrofuran at ?40 °C in the presence of an excess amount of lithium chloride, the copolymerization of these monomers proceeded via complete 1:1 alternating manner to afford the polymer with a narrow molecular weight distribution. A linear relationship was observed between the molecular weight and the monomer/initiator ratio, keeping a narrow molecular weight distribution. The structure of the obtained polymer was determined to be a polyester by IR spectroscopy together with the reductive degradation of the polymer by lithium aluminum hydride, which quantitatively afforded the corresponding diol to the repeating unit of the expected polyester structure. Both conversions of EPK and MBA agreed to a first‐order kinetic equation with linear evolution between the molecular weight and conversion. These observations along with the successful results in two‐stage polymerization indicate that the present copolymerization proceeded through a living mechanism. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2078–2084, 2001     

Radical polymerizations of two stereoisomeric trimethacrylates with rigid adamantane‐like cores from naturally occurring myo‐inositol

Two stereoisomeric trimethacrylates, T1 and T2 , which share a common adamantane‐like rigid core, were synthesized from naturally occurring myo‐inositol, and their radical polymerization behaviors were investigated. For the synthesis of T1 , myo‐inositol was converted to triol 1 , bearing one equatorial hydroxyl group and two axial hydroxyl groups, by orthoesterification, which was used as a precursor. For the synthesis of T2 , 1 was converted to triol 2 , bearing three axial hydroxyl groups, which was used as a precursor. Investigations on the radical polymerization of T1 and T2 , which potentially accompanies the cyclopolymerization of the axially oriented methacrylate moieties, revealed significant differences between the two. (1) The polymerization of T1 affords networked and thus insoluble polymers PT1 , while that of T2 affords less crosslinked and thus soluble polymers PT2 . (2) The amount of residual methacrylate moieties was larger in PT2 than in PT1 . (3) PT2 had higher thermal stability than PT1 , though PT2 contained a larger amount of unreacted methacrylate moieties. These tendencies were successfully correlated with the difference in cyclopolymerization efficiency between the polymerizations of the two monomers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1743–1748     

Soft Matter Nanoparticles with Reactive Coronal Pentafluorophenyl Methacrylate Residues via Non‐Polar RAFT Dispersion Polymerization and Polymerization‐Induced Self‐Assembly

Soft matter nanoparticles exhibiting rich polymorphism with reactive pentafluorophenyl methacrylate (PFPMA) units in their coronae were prepared via non‐polar reversible addition‐fragmentation chain transfer dispersion polymerization and polymerization‐induced self‐assembly. Poly(stearyl methacrylate‐stat‐PFPMA) macro‐CTAs, containing up to 12 mol % PFPMA, were used in n‐octane and n‐tetradecane for the subsequent copolymerization of 3‐phenylpropyl methacrylate. Both formulations gave the full, common family of nanoparticles (spheres, worms, and vesicles) as determined by transmission electron microscopy. Reaction of the PFP ester repeating units in the coronal layer of spherical nanoparticles with benzylamine, tetrahydrofurfurylamine, N,N‐dimethylethylenediamine, and an amine functional methyl red dye yielded a new library of functional spherical nano‐objects. The success of the nucleophilic acyl substitution reactions was confirmed using a combination of ¹H/¹⁹F NMR and Fourier transform infrared spectroscopies as well as dynamic light scattering. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2326–2335