Synthesis of branched polymers by means of anionic polymerization. 11. anionic synthesis of densely branched polystyrenes carrying double branches in each repeating unit

We have demonstrated the first successful synthesis of well-defined densely branched polystyrenes carrying double branches in each of all repeating unit of backbone polymer by the coupling reaction of 1,1-diphenylethylene-end-capped polystyryllithiums with novel polystyrene derivatives having two benzyl bromide moieties in each monomer unit. The coupling reaction efficiently and quantitatively proceeded without any steric limitations to introduce two polystyrene branches in each repeating unit under certain conditions in THF at −40°C. Thus, a series of 36.4- and 181-arm densely branched polystyrenes were synthesized (M_w = 365 ∼ 2 000 kg/mol, M_w/M_n = 1.01 ∼ 1.03). In the 36.4-arm branched polystyrenes thus synthesized, the maximum M_w value of the introduced polystyrene as a branch segment was 55.1 kg/mol. The experimental g‘ values of the 36.4-arm branched polystyrenes deterimined in the range of 0.14 ∼ 0.15 were very close to the value of 0.13 calculated from the empirical equation previously reported by Roovers.     

Peak area measurements of cross-polarization magic-angle-spinning 13C-NMR spectra of crosslinked polystyrenes

Cross-polarization magic-angle-spinning ¹³C-NMR spectra of polystyrenes crosslinked with 1–20% of methine vinyl carbon ¹³C-labeled p-divinylbenzene and of Friedel–Crafts crosslinked poly(chloromethylstyrene)s have been obtained with both glossy solid and CDCl₃-swollen gel samples. The spectra of natural abundance, uncrosslinked, glassy polystyrene, and the spectra of the solid labeled networks give aliphatic and aromatic peak areas only 0.7 times as large per ¹³C atom as that of poly(oxymethylene). Similarly the crosslinked poly(chloromethylstyrene) gave peak areas about 0.6 times that of internal poly(oxymethylene). The labeled gels give peak areas 0.2–0.6 times as large per ¹³C atom as glassy polystyrene, and the peak areas in spectra of gels increase with the divinylbenzene content     

Atomic force microscopy imaging of novel macromolecular species,nanosponges, and their clusters

Atactic polystyrene of M = 330,000 Da and M_w/M_n = 1.04 was subjected to a complete chloromethylation. By heating the chloromethyl polystyrene with SnCl₄ in a very dilute solution in ethylene dichloride, the polymeric coils were converted into intramolecularly hypercrosslinked macromolecules, called “nanosponges.” These species have a molecular weight of about 370,000 Da and a diameter of about 17 nm. When in solution, the nanosponges display a tendency to reversibly self‐assemble into regular clusters. Preparative size‐exclusion chromatography isolates a fraction consisting predominantly of spherical clusters that are composed of 13 subunits and acquire a molecular weight of approximately 5.0 × 10⁶ Da and a diameter of 45 nm. Scanning atomic force microscopy (AFM) provides images of individual nanosponges, N = 13 clusters, as well as higher spherical clusters. The regular spherical species most probably belong to the cluster series N = 1 + ∑(10n² + 2), where n is the number of shells around the central nanosponge. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1451–1455, 1999     

13C-NMR spectroscopic analysis of vinyl groups in styrene–divinylbenzene networks

p-Divinylbenzene (DVB) ¹³C-labeled at the methine carbon of the vinyl group was copolymerized in suspension with styrene at 70, 70–95, and 135–155°C using 2,2′-azobisisobutyronitrile (AIBN) as the initiator. The number of unreacted vinyl groups in each copolymer was determined by ¹³C CP–MAS NMR analysis of solid samples, direct polarization ¹³C-NMR analysis of CDCl₃-swollen gels, and bromination. Results from the three methods agree methods agree qualitatively. Even the 1% DVB-crosslinked networks contained 40% unreacted DVB-vinyl groups when prepared by high conversion polymerization at 70°C and 16% unreacted DVB-vinyl groups when polymerization was finished at 95°C. The analyses were also applied to some commercial crosslinked polystyrenes. Every sample examined contained pendent vinyl groups     

Neutron Scattering Studies of Structure and Self-Assembly of Star-Shaped Polymers with Fullerene Centres in Solutions

Protonated star-shaped polystyrenes with single and double fullerene C₆₀ core and the hybrid stars with pairs of polar and non-polar arms (tertbuthylmetacrylate, polystyrene) have been studied in deuterated toluene (20 °C) by small-angle neutron scattering at low and moderate polymer concentrations (c₁ ∼ 1 g/dl, c₂ ∼ 3–6 g/dl) to evaluate the peculiarities of fullerene centre action on polymers self-assembly in solutions. As we found, the cores composed of two fullerenes, linked via Si(CH₃)₂-bridge, induce stars' anisotropic interactions and association into chain-like structures (correlation radius ∼400–600 nm). Meanwhile, the single-core stars of polystyrene and hybrids organize globular clusters (size ∼ 10³ nm) those geometry do not change significantly by polymer content variation.     

Formation of regular clusters through self-association of intramolecularly hypercrosslinked polystyrene-type nanosponges

Atactic polystyrene of M = 330,000 Da and M_w/M_n = 1.04 was subjected to chloromethylation. By the heating of chloromethylpolystyrene with SnCl₄ in a very dilute solution in ethylene dichloride, the polymeric coils were converted into intramolecularly hypercrosslinked macromolecules, nanosponges, of molecular weight of about 370,000 Da and a diameter of about 17 nm. When in solution, the nanosponges tend to reversibly self-assemble into regular clusters. Size exclusion chromatography and sedimentation analysis corroborate the suggestion that the clusters consist of 13 spherical subunits and thus acquire a molecular weight of about 5.0 × 10⁶ Da and a diameter of about 45 nm. © John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3847–3852, 1997     

Polymer structure of cured alkaline phenol–formaldehyde resol resins with respect to resin synthesis mole ratio and oxidative side reactions

A wood adhesive-type phenol–formaldehyde (PF) resol resin synthesized with a typical formaldehyde to phenol mol ratio of 2.10 was thoroughly cured and studied by the solid-state crosspolarization/magic angle spinning ¹³C nuclear magnetic resonance (CP/MAS NMR) spectroscopy. The methylene group/phenol mol ratio values found were between 1.35 and 1.46, close to the value of a completely cured PF polymer structure. The amount of formaldehyde emitted during resin curing was very small. Other formaldehyde-derived groups determined from CP/MAS NMR spectra and relatively high levels of oxidation products of formaldehyde determined from water extracts of cured resin raised the total formaldehyde-derived groups/phenol mol ratio value to close to that of the synthesis mol ratio. Technological implications of these findings are discussed. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3275–3285, 1997     

Determination of methylene bridge crosslinking in chloromethylated PS‐DVB resins

We present the development of a method for the determination of methylene bridge crosslinking in ¹³C‐labeled chloromethylated polystyrene‐divinylbenzene resins. Our system uses a new room temperature reduction of the chloromethyl groups that circumvents the possible challenges associated with additional crosslinking. We demonstrate how the reduction of the chloromethyl groups allowed for the determination of methylene bridging, derived from the methylenebis(ethenylbenzene) crosslinker, based on the integration of the methylene signal in the ¹³C NMR spectra. Utilizing this method, the total crosslinking within the chloromethylated resin generated at 35 °C was determined to be upward of 10 wt %, which increased from 6 wt % in the unfunctionalized resin. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1955–1960     

Synthesis of Davankov‐type hypercrosslinked resins using different isomer compositions of vinylbenzyl chloride monomer,and application in the solid‐phase extraction of polar compounds

Two different gel‐type resins have been prepared by suspension polymerization using 2 wt % divinylbenzene (DVB) with either p‐vinylbenzyl chloride (pVBC) or a mixture of VBC isomers (～ 70% m‐; ～ 30% p‐). Significant difference in the chlorine content was observed, which was attributed to a more favored hydrolysis process when p‐VBC was used. The presence of hydroxyl groups has been confirmed by elemental microanalytical data and solid‐state ¹³C cross‐polarization/magic angle spinning (CP‐MAS) nuclear magnetic resonance (NMR) spectra. Hypercrosslinked resins were prepared from both gel‐type precursors by treatment with FeCl₃ in 1,2‐dichloroethane (DCE) at 80 °C. The resultant resins showed differences in specific surface area and degree of hydrophilicity. The performance of the hypercrosslinked resins was evaluated in solid‐phase extraction (SPE) of polar compounds, and better results were obtained for the hypercrosslinked resin prepared from p‐VBC that combines a relatively high specific surface area (908 m² g^?1) and somewhat higher oxygen content (3.96 wt % O). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1718–1728, 2005     

Deformation of styrene—divinylbenzene copolymers and hypercrosslinked polystyrenes during solvent adsorption and desorption

An automated procedure was developed for monitoring fast changes in the size of spherical samples of polymers during their contact with a solvent or drying. The kinetics of bulk deformation in these processes was studied for a series of cross-linked polymers, viz., gel-type and porous styrene—divinylbenzene copolymers and poly(divinylbenzenes), and hypercrosslinked polystyrenes. Gel, macroporous, and hypercrosslinked polystyrenes are substantially different in the rate, mechanism, and degree of swelling, which is associated with the principal differences in their physical structures. An unusual effect of a sharp decrease followed by a temporary increase in the volume of porous polystyrene and poly(divinylbenzene) materials were observed during desorption (evaporation) of organic solvents. Water desorption is accompanied by an excessive bulk compression of porous granules giving rise to negative deformations, which gradually relax to the state equilibrium for the dry polymer. The results of dynamic desorption porometry (for water desorption) are indicative of a bimodal size distribution of micropores in hypercrosslinked polystyrene. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 467–476, March, 2007.     

Anionic copolymerization of [60]fullerene with styrene initiated by sodium naphthalene

The novel C₆₀–styrene copolymers with different C₆₀ contents were prepared in sodium naphthalene-initiated anionic polymerization reactions. Like the pure polystyrene, these copolymers exhibited the high solvency in many common organic solvents, even for the copolymer with high C₆₀ content. In the polymerization process of C₆₀ with styrene an important side reaction, i.e., reaction of C₆₀ with sodium naphthalene, would occur simultaneously, whereas crosslinking reaction may be negligible. ¹³C-NMR results provided an evidence that C₆₀ was incorporated covalently into the polystyrene backbone. In contrast to pure polystyrene, the TGA spectrum of copolymer containing ∼ 13% of C₆₀ shows two plateaus. The polystyrene chain segment in copolymer decomposed first at 300–400°C. Then the fullerene units reptured from the corresponding polystyrene fragments attached directly to the C₆₀ cores at 500–638°C. XRD evidence indicates that the degree of order of polymers increases with the fullerene content increased in terms of crystallography. Incorporation of C₆₀ into polystyrene results in the formation of new crystal gratings or crystallization phases. In addition, it was also found that [60]fullerene and its polyanion salts [C₆₀ⁿ⁻(M⁺)_n, M = Li, Na] cannot be used to initiate the anionic polymerization of some monomers such as acrylonitrile and styrene, etc.© 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2653–2663, 1998     

Method of determination of dielectric relaxation characteristics of plasticized polystyrenes on the basis of calorimetric glass temperature

The dielectric loss measurements of different polystyrenes (fractions and blends) with different molecular weights (M _n 2000–125000 g/mol) were carried out in the frequency range 10^–2–10⁶ Hz and the temperature range of the glass process (60°–135°C, depending on the molecular weight). The measurements of the pure fractions showed that the half-width of the glass relaxation process of the different polystyrenes can be correlated by a straight line, if they are plotted versus the relaxation frequency maxima of the glass process, regardless of the difference in both their molecular weight and glass transition temperature. Moreover, the fine structure of the shape of the glass process of polystyrenes with different molecular weights was found to be the same when the glass process appears at the same relaxation frequency range. The addition of oligostyrenes or low molecular <10% wt additives to the high molecular weight polystyrene did not influence the shape of the glass process. The calorimetric glass transition temperature of polystyrene was found to be only dependent on the number average molecular weight as well as on the number of end groups, but not on the molecular weight distribution. The obtained experimental results were correlated to develop a method for the estimation of the dielectric relaxation characteristics (relaxation frequency as well as the shape parameters) of the glass process of plasticized polystyrenes based on the calorimetric glass transition temperature. A method for the analysis of the dielectric relaxation curves of mixtures of label and polymer is suggested.     

N‐bromo‐hydantoin grafted polystyrene beads: Synthesis and nano‐micro beads characteristics for achieving controlled release of active oxidative bromine and extended microbial inactivation efficiency

N‐bromo‐hydantoin and N‐bromo‐5,5′‐dimethylhydantoin conjugated polystyrene beads were synthesized from chloromethyl polystyrene beads which differ in their particles size, crosslinking, nano‐micro porosity, and tunnels size on the surface, in order to study the effect of these parameters on oxidative halogen release and resultant activity, for water purification applications. The synthesized beads were characterized using elemental analysis, FT‐IR, solid state ¹³C‐NMR, and scanning electron microscope (SEM). The conjugation yield and kinetics in different solvents and bromine loading capacity were studied. The N‐bromoamine polystyrene beads were tested for water decontamination according to NSF 231 protocol. The release of active bromine was analyzed by spectrophotometer using a DPD‐1 kit and also studied the antimicrobial activity against Escherichia coli and MS2 phages. Bead's nano‐micro characteristics were found critical for oxidative halogen release control: rate stabilization and modulation, extension and also influences antimicrobial activity. The synthesized beads exhibited extended and stable release of bromine, 6 and 4 log reduction for E. coli and MS2, respectively for 250 L of passing contaminated water. Thus, N‐halamine hydantoins conjugated polystyrenes, chemically or kinetically release modified should have applications as disinfectants in water purification systems as well as medical field. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 596–610     

Synthesis of isotactic polystyrene with a rare-earth catalyst

Polymerization of styrene with the neodymium phosphonate Nd(P₅₀₇)/H₂O/Al(i-Bu)₃ catalytic system has been examined. The polymer obtained was separated into a soluble and an insoluble fraction by 2-butanone extraction. ¹³C-NMR spectra indicate that the insoluble fraction is isotactic polystyrene and the soluble one is syndiotactic-rich atactic polystyrene. The polymerization features are described and discussed. The optimum conditions for the polymerization are as follows: [Nd] = (3.5–5.0) × 10⁻² mol/L; [styrene] = 5 mol/L; [Al]/[Nd] = 6–8 mol/mol; [H₂O]/[Al] = 0.05–0.08 mol/mol; polymerization temperature around 70°C. The percent yield of isotactic polystyrene (IY) is markedly affected by catalyst aging temperature. With increase of the aging temperature from 40 to 70°C, IY increases from 9% to 48%. Using AlEt₃ and Al(i-Bu)₂H instead of Al(i-Bu)₃ decreases the yield of isotactic polystyrene. Different neodymium compounds give the following activity order: Nd(P₅₀₇)₃ > Nd(P₂₀₄)₃ > Nd(OPrⁱ)₃ > NdCl₃ + C₂H₅OH > Nd(naph)₃. With Nd(naph)₃ as catalyst, only atactic polystyrene is obtained. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1773–1778, 1998     

Synthesis of star‐shaped polystyrenes via nitroxide‐mediated stable free‐radical polymerization

High molecular weight star‐shaped polystyrenes were prepared via the coupling of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) terminated polystyrene oligomers with divinylbenzene (DVB) in m‐xylene at 138 °C. The optimum ratio of the coupling solvent (m‐xylene) to divinylbenzene was determined to be 9 to 1 based on volume. Linear polystyrene oligomers (M_n = 19,300 g/mol, M_w/M_n = 1.10) were prepared in bulk styrene using benzoyl peroxide in the presence of TEMPO at approximately 130 °C under an inert atmosphere. Coupling of the TEMPO‐terminated oligomers under optimum conditions resulted in a product with a number average molecular weight exceeding 300,000 g/mol (M_w/M_n = 3.03) after 24 h, suggesting the formation of relatively well‐defined star‐shaped polymers. Additionally, the intrinsic viscosities of the star‐shaped products were lower than calculated values for linear analogs of equivalent molecular weight, which further supported the formation of a star‐shaped architecture. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 216–223, 2001     

Improvement of the thermal stability of cluster‐crosslinked polystyrene and poly(methyl methacrylate) by optimization of the polymerization conditions

The polymerization conditions for polystyrene and poly(methyl methacrylate) crosslinked by 0.5 mol % of the cluster Zr₆O₄(OH)₄(methacrylate)₁₂ were optimized by applying a step polymerization procedure. The onset of thermal decomposition was thus increased up to about 50° for polystyrene and about 110° for poly(methyl methacrylate). The increase in thermal stability correlated with a higher char yield. The glass transition temperatures were also increased by about 15°. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6586–6591, 2005     

Polystyrene local dynamics in dilute solution: Temperature and solvent dependence of C-D vector correlation function shape

Variable temperature ²H-NMR T₁ experiments were performed on backbone deuterated atactic polystyrene in four solvents at two Larmor frequencies. Temperature-frequency superposition, which is consistent with experimental results for many other polymers, cannot describe our data. This indicates that the shape of the correlation function for C-D vector reorientation is temperature dependent. A modified log χ² distribution, of relaxation times, i.e., a delta function plus a log χ² distribution, was used to fit the experimental data. These fits are consistent with literature ¹³C T₁ and NOE data. As polystyrene local dynamics slow down by a factor of 5, the FWHM of the log χ² distribution increases from 0.8 to 1.1 decades. Solvent identity does not play a major role in determining the shape of the correlation function. The fraction of the correlation function decay caused by librational motion was determined to be 0.28. The quantity was compared for series of polymers and found to correlate with the size of the side group. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1241–1250, 1997     

Synthesis and thermal properties of hybrid copolymers of syndiotactic polystyrene and polyhedral oligomeric silsesquioxane

Copolymerizations of styrene and the polyhedral oligomeric silsesquioxane (POSS)–styryl macromonomer 1‐(4‐vinylphenyl)‐3,5,7,9,11,13,15‐heptacyclopentylpentacyclo [9.5.1.1^3,9.1^5,15.1^7,13] octasiloxane have been performed with CpTiCl₃ in conjunction with methylaluminoxane. Random copolymers of syndiotactic polystyrene (sPS) and POSS have been formed and fully characterized with ¹H and ¹³C NMR, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis. NMR data reveal a moderately high syndiotacticity of the polystyrene backbone consistent with this use of CpTiCl₃ as a catalyst and POSS loadings as high as 24 wt % and 3.2 mol %. Thermogravimetric analysis of the sPS–POSS copolymers under both nitrogen and air shows improved thermal stability with higher degradation temperatures and char yields, demonstrating that the inclusion of the inorganic POSS nanoparticles makes the organic polymer matrix more thermally robust. The polymerization activity and thermal stability are also compared with those of reported atactic polystyrene–POSS copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 885–891, 2002; DOI 10.1002/pola.10175     

Unusual mobility of hypercrosslinked polystyrene networks: Swelling and dilatometric studies

Hypercrosslinked polystyrene samples were prepared by an intensive postcrosslinking of highly swollen styrene–divinylbenzene copolymer beads to extremely high degrees of crosslinking that amounted to 100% or even higher. When in the dry state, the materials obtained represent transparent beads of reduced density. Despite the high degree of crosslinking, the materials manifest large increases in volume on swelling with any liquid media as well as large changes in volume on heating. The factors determining the unusual swelling ability of the hypercrosslinked polymers are briefly discussed. Thermodilatometric tests of the polymers with a moderate degree of crosslinking reveal a certain contraction of the beads at temperatures higher than 100 °C. When crosslinked far beyond 100%, the networks demonstrate unusual expansion in the 100–220 °C range; this is followed by a sharp shrinking at higher temperatures. The former is caused by an increased intensity of the vibration movements of the network and a partial relaxation of strong inner stresses; the latter is due to partial chemical oxidation, degradation of network units, or both. This degradation, however, is not accompanied by any loss in weight of the polymer but only results in a transformation into a more dense conventional nonporous material. The strained, rigid open‐work structure of the homogeneous expanded hypercrosslinked polystyrene networks is responsible for their unusual mobility. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1553–1563, 2000     

ESR study of hypercrosslinked polystyrene carbonizate—organic solvent—oxygen systems

Carbonizates of hypercrosslinked polystyrenes were studied by ESR spectroscopy. Conditions for preparation of paramagnetic carbon sorbents used as oxygen sensors were determined. These sorbents are characterized by an intense narrow ESR singlet for air desorption by pyridine, glycerol, ethanol, methanol, and water. For the carbonizates of nonionogenic biporous hypercrosslinked polystyrenes (I) or sulfonic cation-exchange resins based on biporous hypercrosslinked polystyrenes (II), the ESR line width decreases from 10 G in oxygen to 0.4–1.2 G (0.4 G for glycerol) upon solvent introduction, and the signal amplitude increases by two-three orders of magnitude. When solvents with the linear structure of molecules (alkanes, their mono-and dichlorosubstituted derivatives, alcohols) are introduced, the ESR line can decrease to 2.3±0.3 G. Carbonizates I and II obtained by pyrolysis at temperatures 580–620 °C possess a large internal surface (up to 680 m² g⁻¹) and contain packets of condensed aromatic polycycles with delocalized π-electrons. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 824–831, May, 2006.