Fabrication of DNA-protein conjugate layer on gold-substrate and its application to immunosensor

The fabrication of antibody thin film using both protein G and oligonucleotide was carried out by self-assembly (SA) technique for immunosensor. A mixture of 11-mercaptoundecanoic acid (MUA) and oligonucleotide with thiol (SH) end group was self-assembled of gold (Au) surface for two-dimensional (2D) configuration. Protein G was chemically adsorbed on the 11-MUA surface, and then the antibody was immobilized on the protein G region. On the immobilized single-stranded DNA, the complementary DNA–antibody conjugate was hybridized for the oriented immobilization of antibody. The formation of self-assembled 11-MUA/oligonucleotide layer, protein G immobilization, antibody layer, and antigen binding was investigated using surface plasmon resonance (SPR). The topographies of the fabricated surfaces were observed by atomic force microscopy (AFM). When compared with the amount of antigen binding on the antibody thin film fabricated by protein G only, the proposed biosurface fabricated with both protein G and oligonucleotide showed better binding capacity, which implicates the improvement of the detection limit.     

Electrode surface modification by a spirobifluorene derivative. An XPS and electrochemical investigation

Ordered thin layers of a spirobifluorene derivative containing an amino group were formed by grafting them onto a self-assembled monolayer (SAM) of 11-mercaptoundecanoic acid (11-MUA) on gold. Either physical (H-bonding) or chemical bonding (activated by EDCl) was investigated. X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy confirmed that both methods can be used to effectively graft 2-amino-9,9'-spirobifluorene molecules onto the SAM surface, giving high surface coverages, with a significantly higher packing in the case of chemisorbed films. EIS measurements also showed that the covalently bonded spirobifluorene SAMs act as an effective barrier to both ion penetration and heterogeneous electron transfer.     

Interfacial structure in thin water layers formed by forced dewetting on self-assembled monolayers of omega-terminated alkanethiols on Ag

A method for the spectroscopic characterization of interfacial fluid molecular structure near solid substrates is reported. The thickness and interfacial molecular structure of residual ultrathin D20 films remaining after forced dewetting on alkanethiolate self-assembled monolayers (SAMs) of 11 1-mercaptoundecanoic acid (11-MUA), 11-mercaptoundecanol (11-MUD), and undecanethiol (UDT) on Ag are investigated using ellipsometry and surface Raman spectroscopy. The residual film thickness left after withdrawal is greater on hydrophilic SAMs than on hydrophobic SAMs. This behavior is rationalized on the basis of differing degrees of fluid slip within the interfacial region due to different interfacial molecular structure. The v(O-D) regions of surface Raman spectra clearly indicate unique interfacial molecular properties within these films that differ from bulk D20. Although the residual films are created by shear forces and Marangoni flow at the three-phase line during the forced dewetting process, the nature of the films sampled optically must also be considered from the standpoint of thin film stability after dewetting. Thus, the resulting D20 films exist in vastly different morphologies depending on the nature of the water-SAM interactions. Residual D20 is proposed to exist as small nanodroplets on UDT surfaces due tospontaneous rupture of the film after dewetting. In contrast, on 11-MUD and 11-MUA surfaces, these films exist in a metastable state that retains their conformal nature on the underlying modified surface. Analysis of the peak intensity ratios of the so-called "ice-like" to "liquid-like" v(O-D) modes suggests more ice-like D20 character near 11-MUD surfaces, but more liquid-like character near 11-MUA and UDT surfaces. The creation of residual ultrathin films by forced dewetting is thus demonstrated to be a powerful method for characterizing interfacial molecular structure of fluids near a solid substrate under ambient conditions of temperature and pressure.     

Responsive polymer/gold nanoparticle composite thin films fabricated by solvent-induced self-assembly and spin-coating

Self-assembled poly(4-vinylpyridine)-grafted gold (Au) nanoparticles (NPs) and polystyrene-b-poly(4-vinylpyridine) block copolymers were fabricated by the introduction of a selective solvent to a common solution. The assembled mixtures were spin-coated onto solid substrates to fabricate composite gold/polymer thin films composed of copolymer-hybridized Au NPs and independent copolymer micelles. The obtained composite Au thin films had variable localized surface plasmon resonance (LSPR) bands and microscopic morphologies upon vapor annealing with selective solvents because the adsorption and dissolving of solvent molecules into the films could rearrange the copolymer block. The hybrid nanostructured Au thin films may have potential in vapor sensing and organic assays.     

Surface grafted sulfobetaine polymers via atom transfer radical polymerization as superlow fouling coatings

One of the sulfobetaine methacrylate (SBMA) monomers, N-(3-sulfopropyl)-N-(methacryloxyethyl)-N,N-dimethylammonium betaine, was polymerized onto initiator-covered gold surfaces using atom transfer radical polymerization (ATRP) to form uniform polymer brushes. Self-assembled monolayers (SAMs) with ATRP initiators were characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The thickness of grafted poly(SBMA) films was measured by ellipsometry. Fibrinogen adsorption on poly(SBMA) grafted surfaces was measured with a surface plasmon resonance (SPR) sensor. Two approaches were compared to graft ATRP initiators onto gold surfaces for surface polymerization and subsequent protein adsorption on these polymer grafted surfaces. The first was to prepare a SAM from omega-mercaptoundecyl bromoisobutyrate onto a gold surface. Superlow fouling surfaces with well-controlled poly(SBMA) brushes were achieved using this approach (e.g., fibrinogen adsorption <0.3 ng/cm2). The second approach was to react bromoisobutyryl bromide with a hydroxyl-terminated SAM on a gold surface. Although protein adsorption decreased as the density of surface initiators increased, the surface prepared using the second approach was not able to achieve as low protein adsorption as the first approach. Key parameters to achieve superlow fouling surfaces were studied and discussed.     

Adsorption of polyamides on SAMs: effect of SAM grafting density on polyamide morphology

In this paper we focus on the understanding of the morphological behaviour of Polyamide 66 (PA66) in a constrained geometry generated by adsorption onto chemically controlled interfaces such as thiol self‐assembled monolayers (SAMs) grafted on gold substrates. The latter are prepared under different experimental conditions to illustrate the mechanism of PA–SAM interaction. The crystalline morphology of polyamide nanofilms, analysed by atomic force microscopy, was found to be dependent directly on the surface chemistry that is controlled by the thiol functionality (e.g. NH₂‐ and COOH‐ terminated thiols) and by the density and the structural organization of the grafts. These two parameters depend on the immersion times of the gold substrate in the thiol solutions. Furthermore, a direct correlation is evidenced between the polyamide morphology in thin films and its crystalline amount, as calculated by polarization–modulation infrared reflection–absorption spectroscopy. Quantitative results propose an interfacial interaction mechanism between the polyamide chains and the surface grafts, and give information about the SAM formation kinetics and its organization during the grafting process. Copyright © 2003 John Wiley & Sons, Ltd.     

Surface stress, kinetics, and structure of alkanethiol self-assembled monolayers

The surface stress induced during the formation of alkanethiol self-assembled monolayers (SAMs) on gold from the vapor phase was measured using a micromechanical cantilever-based chemical sensor. Simultaneous in situ thickness measurements were carried out using ellipsometry. Ex situ scanning tunneling microscopy was performed in air to ascertain the final monolayer structure. The evolution of the surface stress induced during coverage-dependent structural phase transitions reveals features not apparent in average ellipsometric thickness measurements. These results show that both the kinetics of SAM formation and the resulting SAM structure are strongly influenced both by the surface structure of the underlying gold substrate and by the impingement rate of the alkanethiol onto the gold surface. In particular, the adsorption onto gold surfaces having large, flat grains produces high-quality self-assembled monolayers. An induced compressive surface stress of 15.9 +/- 0.6 N/m results when a c(4x2) dodecanethiol SAM forms on gold. However, the SAMs formed on small-grained gold are incomplete and an induced surface stress of only 0.51 +/- 0.02 N/m results. The progression to a fully formed SAM whose alkyl chains adopt a vertical (standing-up) orientation is clearly inhibited in the case of a small-grained gold substrate and is promoted in the case of a large-grained gold substrate.     

Selective depositions on polyelectrolyte multilayers: self-assembled monolayers of m-dPEG acid as molecular template

This paper describes the fabrication of self-assembled monolayer (SAM) patterns of m-d-poly(ethylene glycol) (m-dPEG) acid molecules onto polyelectrolyte multilayers (PEMs). The patterned SAMs on PEMs were created by ionic interactions using microcontact printing (microCP) technique. The created m-dPEG acid monolayer patterns on PEMs act as resistive templates, and thus further depositions of consecutive poly(anion)/poly(cation) pairs of charged particles result in the formation of three-dimensional (3-D) patterned PEM films or selective particle depositions atop the original multilayer thin films. In this study, we illustrate nonlithographic methods of patterning and controlling 3-D PEM architectures and selective particle depositions. We investigated the effect of variables--the choice of solvent, concentration, pH, substrate pretreatment, and stamp contact times--on microcontact printing of m-dPEG acid molecules onto PEM films to determine the optimal conditions for these parameters to achieve efficient transfer of m-dPEG acid patterns onto PEMs. Among the variables, the pH of the m-dPEG acid ink solution played the most important role in the transfer efficiency of the patterns onto the multilayer films. The patterned films were characterized by optical microscopy and atomic force microscopy (AFM).     

Asymmetrically Functionalized,Four‐Armed,Poly(ethylene glycol) Compounds for Construction of Chemically Functionalizable Non‐Biofouling Surfaces

Asymmetrically functionalized, four‐armed, Tween 20 derivatives that formed stable monomolecular films on solid substrates were designed and synthesized. Thiol‐modified Tween 20 was used for forming self‐assembled monolayers (SAMs) on gold, and maleimide‐modified Tween 20 was introduced onto SiO₂ surfaces with SAMs of (3‐mercaptopropyl)trimethoxysilane through Michael addition. These structurally modified Tween 20 compounds gave the original characteristics of Tween 20, non‐biofouling (from ethylene glycol groups) and functionalizable (from OH groups) properties, to each substrate. The non‐biofouling properties of the Tween 20‐coated gold and SiO₂ surfaces were investigated by surface plasmon resonance spectroscopy and ellipsometry, and these surfaces showed strong resistance against nonspecific adsorption of proteins. In addition, the biospecific binding of streptavidin was achieved after coupling of (+)‐biotinyl‐3,6,9‐trioxaundecanediamine onto the non‐biofouling surfaces through amide‐bond formation.     

Site-selective dye deposition on microstructures of fused silica fabricated using the LIBWE method

Using laser-induced backside wet etching (LIBWE) technique, microstructures were fabricated onto the surface of fused silica plates, which were pre-coated with self-assembled monolayers (SAMs). Dye molecules and proteins were alternately deposited onto the laser-irradiated or non-irradiated areas by either chemical bonding or physical adsorption.     

Patterning inorganic (CaCO3) thin films via a polymer-induced liquid-precursor process

The biomimetic synthesis of patterned mineral thin films, based on a combination of the microcontact printing technique and a novel crystallization process called the polymer-induced liquid-precursor (PILP) process, is demonstrated. The PILP process enables the deposition of smooth and continuous calcitic mineral films (up to 1500 nm in thickness) under low-temperature and aqueous-based processing conditions. The films are formed by deposition of colloidal droplets composed of a liquid-phase mineral precursor that is induced by a polymeric process-directing agent (polyaspartate or polyacrylate salts). The droplets can be preferentially deposited onto patterned substrates templated with self-assembled monolayers (SAMs) of alkanethiolate on gold. The droplets coalesce to form an amorphous mineral film, which then transforms (solidifies and crystallizes) while retaining the shape of the patterned template, providing a means for patterning the location and morphology of two-dimensional calcite crystals. A vertical substrate experiment supports the premise that the calcite films are created by adsorption of colloidal droplets from solution, rather than heterogeneous nucleation and growth of an amorphous phase on the SAMs. Large single-crystalline domains, on the order of 50-100 microm, can be "molded" into nonequilibrium morphologies by constraining the mineral precursor to a chemically defined "compartment". Biominerals are well recognized for their elaborate nonequilibrium molded crystal morphologies, and increasing evidence suggests that many biominerals are formed from an amorphous precursor that is stabilized by polyanionic proteins. The biomimetic system examined here, which consists of a polyanionic process-directing agent in combination with a functionalized organic template, offers a practical tool for generating complex inorganic structures such as those found in biominerals.     

pH-Dependent force spectroscopy of tri(ethylene glycol)- and methyl-terminated self-assembled monolayers adsorbed on gold

Self-assembled monolayers (SAMs) of methoxy-tri(ethylene glycol)- (EG(3)-OMe) and methyl-terminated alkanethiols (C(16)) adsorbed on polycrystalline gold were investigated by chemical force spectroscopy. Measurements were performed in aqueous electrolyte solutions depending on ionic strength and pH value. Charged and hydrophobic tips were employed as probes to mimic local patches of proteins and to study the interaction at the organic/liquid interface in detail. Force-distance curves reveal information about the origin of the observed interaction and the underlying mechanisms. The measurements confirm an effective negative surface charge to be present at the oligo(ethylene glycol) (OEG) and the methyl interface and suggest that the charges are due to the adsorption of hydroxyl ions from aqueous solution. pH-dependent measurements further support the robustness of the established charge associated with the OEG films. Its sign does not change over the whole range of investigated values between pH approximately 3.5 and approximately 10. In contrast, the hydrophobic self-assembled hexadecanethiol films on gold show an isoelectric point (IEP) around pH 4. While the mechanism of charge establishment appears to be similar for both SA films, the strength of hydrogen bonding to interfacial water, which acts as a template for hydroxyl ion adsorption, is likely to be responsible for the observed difference.     

Interfacial reactions of nickel ion containing multilayers and nickel ultra‐thin films with an interpenetrating polymer network substrate

An interpenetrating polymer network (IPN) substrate was prepared by dip‐pulling a silicon wafer or glass plate into polymer precursors, followed by solidification at room temperature. The nickel ion containing Langmuir–Blodgett (LB) multilayers was subsequently fabricated onto the IPN substrate by a LB technique, and then the nickel ultra‐thin films were deposited by chemical reduction. The interfacial reactions, the metal transformations and the non‐metal bond types during the film formation were detected by the X‐ray photoelectron spectroscopy, atomic force microscope and attenuated total reflection infrared spectroscopy. Copyright © 2011 John Wiley & Sons, Ltd.     

Self-assembled monolayers derived from a double-chained monothiol having chemically dissimilar chains

The structure and conformation of self-assembled monolayers (SAMs) derived from the adsorption of a specifically designed double-chained partially fluorinated thiol having the formula 12,12,13,13,14,14,15,15,16,16,17,17,18,18,19,19,19-heptadecafluoro -2-tetradecylnona-decane-1-thiol ( 2) onto the surface of evaporated gold were examined by ellipsometry, contact angle goniometry, polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS), and X-ray photoelectron spectroscopy (XPS). The results were compared to those of SAMs generated from normal hexadecanethiol ( 1) and a structurally related single-chained partially fluorinated thiol having the formula 12,12,13,13,14,14,15,15,16,16,17,17,18,18,19,19,19-heptadecafluorononadecane-1-thiol ( 3). Collectively, the studies demonstrate that the double-chained adsorbate 2 forms SAMs on gold in which the alkyl chains are less densely packed and less conformationally ordered than those in the SAMs derived from each of the single-chained adsorbates. Furthermore, the fluorocarbon moieties in the SAMs derived from 2 are more tilted from the surface normal than those in the SAMs derived from 3. The low values of contact angle hysteresis suggest, however, that the double-chained adsorbate 2 generates homogeneous monolayer films on the surface of gold.     

Selective deposition in multilayer assembly: SAMs as molecular templates

Self-assembled monolayers (SAMs) on surfaces may be used as molecular templates for the selective deposition of polymer multilayer films. SAMs of ω-functionalized alkane thiolates are patterned onto gold surfaces with micron scale features using the microcontact printing method; glass substrates can also be patterned with trichloroalkylsilane SAMs. Patterned polymeric monolayer and multilayer films are adsorbed atop the SAM from dilute polymer solutions using ionic macromolecular self-assembly techniques which have been developed recently. The effects of polymer molecular weight and ionic content, as well as the use of a second SAM in the unpatterned regions to promote selectivity are discussed. Surface roughness, selectivity and other film properties are presented. It is demonstrated that this technique can be used successfully in the patterning of micron scale features with multilayers of low molecular weight upon adsorption from dilute solution.     

Molecular pattern formation using chemically modified cytochrome c

Molecular pattern formation using chemically modified cytochrome c and green fluorescent protein (GFP) was presented for the application as a bioelectronic device. A protein conjugate was synthesized by the formation of disulfide bridges. In order to make molecular assembly onto the gold-coated substrate, cytochrome c was cross-linked with N-succinimidyl-3-(2-pyridyldithio)propionate (SPDP). After the modification of cytochrome c, it was spontaneously deposited, so that it could be adsorbed onto the gold-coated substrate by self-assembly (SA) technique. Using the cellulose membrane, cytochrome c molecules were deposited onto the gold-coated substrate with the spatial resolution of ca. 0.2 μm. In order to verify the modified cytochrome c, UV absorption spectrum was measured. GFP was adsorbed onto the cytochrome c monolayer by electrostatic force. Fluorescence emission spectrum was investigated to verify the existence of the GFP molecule onto the cytochrome c monolayer. To verify the adsorption of cytochrome c molecules onto the gold-coated substrate and GFP molecules onto the cytochrome c monolayer, the atomic force microscopy and lateral force microscopy investigations were performed. Molecular pattern formation of cytochrome c and GFP molecules were successfully performed by chemical means and electrostatic force.     

以重氮树脂与4-甲酰基苯甲酸为底层构筑三联吡啶-钌离子层-层自组装超薄功能膜

在呈负电性的基底表面依次使用重氮树脂(DR)、4-甲酰基苯甲酸(FBA)和4-′(4-氨基苯基)-2,2′:6′,2″-三联吡啶(Atpy)进行修饰,在先后经过离子键转变为共价键和希夫碱反应后,实现了2,2′:6′,2″-三联吡啶基团在基片表面的锚定;然后基于配位作用,由1,4-二(2,2′:6′,2″-三联吡啶-4′-基)苯(Bi-tpy)与RuCl3在其表面构筑具有纳米尺寸的金属-有机超分子超薄膜.紫外-可见光谱、AFM均证明了这种层层自组装超薄膜的成功形成.光电转换显示其具有良好的光电转换性能和光化学稳定性,其转换效率与膜的厚度呈现较好的线性关系.     

Photochemical patterning of a self-assembled monolayer of 7-diazomethylcarbonyl-2,4,9-trithiaadmantane on gold films via Wolff rearrangement

Photolithographic attachment of functional organic molecules via ester or amide linkages to self-assembled monolayers (SAMs) on gold thin films was achieved by employing a novel photoreactive surface anchor, 7-diazomethylcarbonyl-2,4,9-trithiaadmantane. The photoreactive SAM was prepared by the spontaneous physical adsorption of the photoreactive surface anchor onto gold surfaces. The alpha-diazo ketone moiety of the SAM was found to display the classical Wolff rearrangement reactivity to produce a ketene intermediate on the exposed area. Organic molecules such as alcohols and amines can thus be attached to the gold surfaces selectively by the facile in situ formation of ester or amide linkages. The structure and reactivity of the photoreactive surface anchor were characterized by real-time FT-IR, fluorescence, and polarization modulation infrared reflectance absorption spectroscopy (PM-IRRAS). The Wolff rearrangement reactivity of the SAM suggested that a "surface-isolated" carbonylcarbene may be generated when the SAM was exposed to 255-nm irradiation.     

Characterization of gas-expanded liquid-deposited gold nanoparticle films on substrates of varying surface energy

Dodecanethiol-stabilized gold nanoparticles (AuNPs) were deposited via a gas-expanded liquid (GXL) technique utilizing CO(2)-expanded hexane onto substrates of different surface energy. The different surface energies were achieved by coating silicon (100) substrates with various organic self-assembled monolayers (SAMs). Following the deposition of AuNP films, the films were characterized to determine the effect of substrate surface energy on nanoparticle film deposition and growth. Interestingly, the critical surface tension of a given substrate does not directly describe nanoparticle film morphology. However, the results in this study indicate a shift between layer-by-layer and island film growth based on the critical surface tension of the capping ligand. Additionally, the fraction of surface area covered by the AuNP film decreases as the oleophobic nature of the surfaces increases. On the basis of this information, the potential exists to engineer nanoparticle films with desired morphologies and characteristics.     

Multivalent host-guest interactions between beta-cyclodextrin self-assembled monolayers and poly(isobutene-alt-maleic acid)s modified with hydrophobic guest moieties

Poly(isobutene-alt-maleic acid)s modified with p-tert-butylphenyl or adamantyl groups interact with beta-cyclodextrin self-assembled monolayers (beta-CD SAMs) by inclusion of the hydrophobic substituents in the beta-cyclodextrin cavities. The adsorption was shown to be strong, specific, and irreversible. Even with a monovalent competitor in solution, adsorption to the beta-CD SAMs was observed, and desorption proved impossible. The adsorbed polymer layer was very thin as evidenced by surface plasmon resonance spectroscopy and AFM. Apparently, all or most hydrophobic groups of the polymers were employed efficiently in multivalent binding, as was further supported by the absence of specific binding of beta-CD-modified gold nanoparticles to the polymer surface assemblies. Supramolecular microcontact printing of the polymers onto the beta-CD SAMs led to assembly formation in the targeted areas of the substrates.